summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
AgeCommit message (Collapse)AuthorFilesLines
2022-07-11mt76: mt7915: update the maximum size of beacon offloadMeiChia Chiu1-0/+6
Since an in-band discovery frame is offloaded by MCU, here we enlarge the command size to accommodate the additional content. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: move mt76_connac2_mcu_fill_message in mt76_connac moduleLorenzo Bianconi1-3/+0
Move mt76_connac2_mcu_fill_message routine in shared module in order to reuse it for mt7921 and mt7915e drivers. This is a preliminary patch to add mt7990 driver support. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: move mcu_txd/mcu_rxd structures in shared codeLorenzo Bianconi1-38/+4
This is a preliminary patch to add mt7990 chipset support. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: add support for 6G in-band discoveryMeiChia Chiu1-1/+14
Add offloading FILS discovery and unsolicited broadcast probe response support. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: rework SER debugfs knobRyder Lee1-0/+14
1. get status of system recovery from firmware. 2. add more recovery points. 3. make knob per phy. Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: remove SCS featureRyder Lee1-10/+0
SCS is obsoleted and no longer used, so remove it. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: mt7915: check band idx for bcc eventRyder Lee1-0/+9
Add missing band idx check for DBDC cases. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: introduce mt7915_set_radar_background routineLorenzo Bianconi1-0/+23
Introduce mt7915_mcu_rdd_background_enable and mt7915_mcu_background_chain_ctrl routines to configure rx dfs dedicated chain. This is a preliminary patch to add zero-wait dfs support performing CAC detection on rdd2. Tested-by: Owen Peng <owen.peng@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: remove duplicated defs in mcu.hLorenzo Bianconi1-23/+0
Remove duplicated definitions in mt7915/mcu.h Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: update mt7915_chan_mib_offs for mt7916Bo Jiao1-1/+7
Update v2 offset. This is an intermediate patch to add mt7916 support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7915: add mu-mimo and ofdma debugfs knobsMeiChia Chiu1-0/+44
Add mu-mimo and ofdma packet counters statistics. The statistics are clear on read. Reviewed-by: Money Wang <Money.Wang@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7915: rely on mt76_connac definitionsLorenzo Bianconi1-794/+2
Remove duplicated mcu definitions in mt7915 mcu.h and reused connac ones. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-18mt76: mt7915: add default calibrated data supportShayne Chen1-0/+1
Load the default eeprom data when the content of flash/efuse is invalid. This could help to eliminate some issues due to incorrect or insufficient rf values. Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-18mt76: mt7915: fix SMPS operation failRyder Lee1-0/+8
TGn fails sending SM power save mode action frame to the AP to switch from dynamic SMPS mode to static mode. Reported-by: Fang Zhao <fang.zhao@mediatek.com> Signed-off-by: Fang Zhao <fang.zhao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: add debugfs knobs for MCU utilizationShayne Chen1-0/+2
Add debugfs knobs to read MCU utilization, which helps user know firmware status more easily to narrow down CPU bottleneck issues. Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: add WA firmware log supportShayne Chen1-0/+5
Support to turn on/off WA firmware log from debugfs. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: rework .set_bitrate_mask() to support more optionsRyder Lee1-5/+11
With this patch, driver can support single rate, (HE)GI and HE_LTF configuration through .set_bitrate_mask(). Tested-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: enable HE UL MU-MIMOShayne Chen1-0/+1
Enable HE UL MU-MIMO in sta_rec_muru, which works on both ap and station mode. For sending trigger frames, one of the conditions fw uses is to check if mib rx airtime meets the threshold. There's a main control of mib rx airtime report register in fw, so we need to enable the register by mcu cmd instead of directly writing it, otherwise it will still be disabled by fw. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: set muru platform typeShayne Chen1-0/+10
Set muru platform type by mcu cmd to notify fw to init corresponding algorithm. Suggested-by: Money Wang <money.wang@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: rework starec TLV tagsShayne Chen1-0/+1
Rework starec tags to the order which firmware expected. This also fixes some weird behaviors during generating SPL of HE-MU. Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: improve starec readability of txbfRyder Lee1-9/+4
1. Drop unnecessary MT_EBF/MT_IBF enum. 2. Rename fields 'nc'/'nr' to 'ncol'/'nrow'. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: fix txbf starec TLV issuesRyder Lee1-1/+3
With this patch we can append txbf starec TLVs. This is an intermediate patch to improve HE MUMIMO performances. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: introduce mt7915_mcu_twt_agrt_update mcu commandLorenzo Bianconi1-0/+9
This is a preliminary patch to add TWT support to mt7915 Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: introduce bss coloring supportLorenzo Bianconi1-10/+11
Introduce mcu APIs to configure bss coloring and to report bss coloring collisions. Add support to report coloring countdown in beacon sent by the device. Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: add HE-LTF into fixed rate commandRyder Lee1-0/+1
Add HE-LTF control. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: switch proper tx arbiter mode in testmodeShayne Chen1-0/+1
Switch proper tx arbiter mode during testmode tx to prevent from entering the flow of normal tx in FW. Also, testmode SU and MU tx need to use different arbiter mode. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: report tx rate directly from tx statusRyder Lee1-43/+0
Report tx rate from tx status packets instead of receving periodic mcu event. This improves flexibility, accuracy and AQL performance, and simplifies code flow for better readability. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: adapt new firmware to update BA winsize for Rx sessionBo Jiao1-0/+1
The newer firmware requires host driver to set BA winsize on both Tx/Rx sessions, so modify it for the long run. Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-08-06mt76: fix enum type mismatchArnd Bergmann1-1/+2
There is no 'NONE' version of 'enum mcu_cipher_type', and returning 'MT_CIPHER_NONE' causes a warning: drivers/net/wireless/mediatek/mt76/mt7921/mcu.c: In function 'mt7921_mcu_get_cipher': drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:114:24: error: implicit conversion from 'enum mt76_cipher_type' to 'enum mcu_cipher_type' [-Werror=enum-conversion] 114 | return MT_CIPHER_NONE; | ^~~~~~~~~~~~~~ Add the missing MCU_CIPHER_NONE defintion that fits in here with the same value. Fixes: c368362c36d3 ("mt76: fix iv and CCMP header insertion") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721150745.1914829-1-arnd@kernel.org
2021-06-19mt76: fix iv and CCMP header insertionRyder Lee1-12/+11
The iv from RXD is only for TKIP_RSC/CCMP_PN/GCMP_PN, and it needs a check for CCMP header insertion. Move mt76_cipher_type to mt76.h to reduce duplicated code. Signed-off-by: Xing Song <xing.song@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7915: introduce mt7915_mcu_set_txbf()Ryder Lee1-0/+6
Use mt7915_mcu_set_txbf() to reduce global functions. This can be easily extended to support other TxBF commands in further patches. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7915: use mt7915_mcu_get_mib_info() to get survey dataRyder Lee1-0/+14
Firmware functions (SCS, MU ...) also require read-clear phy counters, hence firmware prepares a global task to read shared fields out to a shared pool to avoid concurrency. Switch to event format accordingly. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7915: add thermal cooling device supportRyder Lee1-0/+35
Thermal cooling device support is added to control the temperature by throttling the data transmission for the given duration. Throttling is done by adjusting Tx period by given percentage of time. The thermal device allows user to configure duty cycle. Throttling can be disabled by setting the duty cycle to 0. The cooling device can be found under /sys/class/thermal/cooling_deviceX/. Corresponding soft link to this device can be found under phy folder To set duty cycle as 80%, echo 80 > /sys/class/ieee80211/phy*/cooling_device/cur_state Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7915: cleanup mt7915_mcu_sta_rate_ctrl_tlv()Ryder Lee1-1/+1
Remove obsoleted codes. This is the preparation for .set_bitrate_mask(). Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: add support for applying pre-calibration dataRyder Lee1-0/+2
When the EEPROM data is read from flash, it can contain pre-calibration data, which can save calibration time. Note that group_cal can save 30% bootup calibration time, and dpd_cal can save 75% channel switching time. Tested-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: fix CSA notification for DBDCRyder Lee1-1/+10
Add CSA notification for second phy. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: always use WTBL_MAX_SIZE for tlv allocationRyder Lee1-3/+0
Simplify WTBL defines. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7915: disable RED support in the WA firmwareFelix Fietkau1-0/+15
It causes high CPU load on the WA core, which can lead to extra latency when using many stations. Dropping packets for long queues is managed by mac80211 fq_codel instead Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7915: rework mcu APIFelix Fietkau1-0/+15
Add support for passing flags for selecting the MCU target and query type instead of trying to detect it based on the command id Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7915: add support for continuous tx in testmodeShayne Chen1-0/+1
Implement continuous tx state for MT7915 NIC testmode. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7915: clean hw queue before starting new testmode txShayne Chen1-0/+1
Add a testmode mcu command to clean up hw tx queue before a new testmode tx starts. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7915: add support for ipg in testmodeShayne Chen1-0/+1
Add support to calculate and apply ipg parameters in testmode for MT7915 NIC. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7915: split edca update functionShayne Chen1-0/+24
Split parameter settings and mcu command update in mt7915_mcu_set_tx(). This is for reusing edca update function in testmode ipg setting. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: mt7915: add support for flash modeShayne Chen1-0/+6
Add support for getting rf values from flash. This is used for some test purposes and products. If the mtd partition is configured in dts, driver will read from flash to init eeprom command; if not, still init it with efuse's values. An example: &slot0 { mt7915@0,0 { reg = <0x0000 0 0 0 0>; device_type = "pci"; mediatek,mtd-eeprom = <&factory 0x0000>; }; }; Acked-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: remove unused mt7915_mcu_bss_sync_tlv()Ryder Lee1-12/+2
mt7915_mcu_bss_sync_tlv() is no longer used, so remove it. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: add support to set tx frequency offset in testmodeShayne Chen1-0/+1
Support to set tx frequency offset in testmode, which is usally used in the pre-calibration stage. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: implement testmode tx supportShayne Chen1-0/+5
Support testmode tx for MT7915A, including tx streams and HE rate settings. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: query station rx rate from firmwareFelix Fietkau1-0/+21
When per-packet rate reporting is enabled, the hardware can get stuck under some conditions. It self-recovers quickly, but in practice this leads to reduced performance. In order to avoid running into this issue, disable per-packet rate reporting by default and query the rx rate from firmware instead, unless monitor mode is enabled. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: support 32 station interfacesFelix Fietkau1-0/+1
When looking for a MAC address slot, start by using main BSSID slots 1-3, afterwards use 16 repeater mode BSSID slots, then start using the slots usually used for AP mode. This search order should prevent unnecessary conflicts with AP mode interfaces on the same PHY Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: add encap offload for 4-address mode stationsFelix Fietkau1-0/+2
Enable MWDS mode in firmware as well and fix txp->rept_wds_wcid for wcid >= 255 Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-27 21:53:45 +0300