summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt7915/init.c
AgeCommit message (Collapse)AuthorFilesLines
2023-03-10wifi: mt76: mt7915: rework mt7915_thermal_temp_store()Howard Hsu1-2/+16
[ Upstream commit ecaccdae7a7e8f76eeb6544295ca0593c2f65a33 ] Call mt7915_mcu_set_thermal_protect() through mt7915_thermal_temp_store() to update firmware trigger/restore temp directly. Fixes: 02ee68b95d81 ("mt76: mt7915: add control knobs for thermal throttling") Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: mt7915: rework mt7915_mcu_set_thermal_throttlingHoward Hsu1-3/+0
[ Upstream commit 5ad42d19f6596e54b091827c397fdb7c091d45f7 ] This patch includes 2 changes: 1. Firmware expects to disable thermal protect first before reconfiguring. 2. Separate setting thermal_protect and setting thermal_tx_duty into different functions. These two firmware commands do not need to send together. Fixes: 34b877d972be ("mt76: mt7915: add thermal cooling device support") Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after ↵Howard Hsu1-2/+1
init_work [ Upstream commit 7d12b38ab6f6b77198cd3a66db19587bbdd3308c ] Enable thermal management by default shall not be executed during mcu init. This causes thermal configuration being reset to the firmware default settings. Fixes: 0063b86c9120 ("mt76: mt7915e: Enable thermal management by default") Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-01wifi: mt76: mt7915: rely on band_idx of mt76_phyRyder Lee1-3/+3
The commit dc44c45c8cd0 added band_idx into mt76_phy, so switching to rely on that. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: enable .sta_set_txpwr supportRyder Lee1-0/+3
This adds support for adjusting the Txpower level while pushing traffic to an associated station. The allowed range is from 0 to the maximum power of channel. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: don't claim 160MHz support with mt7915 DBDCNicolas Cavallari1-16/+31
The hardware simply does not support this in DBDC mode. Remove it from the HE capabilities. Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: Fix VHT beamforming capabilities with DBDCNicolas Cavallari1-1/+2
Do not hardcode beamformee 4 space-time streams support, because DBDC can only support up to 2. Fixes: 00b2e16e0063 ("mt76: mt7915: add TxBF capabilities") Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: enable coredump supportRyder Lee1-1/+11
Host triggered and catastrophic event triggered firmware core dumping for basic firmware issues triage, including state reporting, task/irq info, function calltrace and MCU memory dump. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: enable full system reset supportBo Jiao1-5/+6
Add mt7915_reset() and refactor mt7915_mac_reset_work() to support full system recovery. Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: add ack signal supportRyder Lee1-0/+7
This reports signal strength of ACK packets from the peer as measured at each interface. Tested-by: Shurong Wen <shurong.wen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: improve accuracy of time_busy calculationRyder Lee1-0/+17
The MIB INFO command is fetching MIB_BUSY_TIME, MIB_TX_TIME, MIB_RX_TIME and MIB_OBSS_AIRTIME from the radio and filling out cc_busy, cc_tx, cc_bss_rx and cc_rx respectively. busy should be >= tx + rx >= tx + bss_rx but we don’t always quite see this. Sometimes tx + rx is a bit higher than busy due to inaccurate accounting, so this patch recalculates numbers to make them more reasonable. Reported-By: Kevin Schneider <kevin.schneider@adtran.com> Tested-by: Kevin Schneider <kevin.schneider@adtran.com> Tested-by: Chad Monroe <chad.monroe@smartrg.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: deal with special variant of mt7916Peter Chiu1-19/+18
A variant of mt7916 supports up to 3 tx/rx paths but with only 2 spatial streams. An example usage of the 3rd path is to server as an auxiliary for beamforming. In order to deal with this case, this patch reworks some parts to correctly use paths or streams. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: introduce phys array in mt76_dev structureLorenzo Bianconi1-2/+2
Introduce phys array in mt76_dev structure to reference mt76_phy supported by the chipset. This is a preliminary patch to introduce newer chipset support. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7915 add ht mpdu densityMeiChia Chiu1-1/+6
set ht mpdu density to 4 usec. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7915: update mpdu density in 6g capabilityPeter Chiu1-1/+1
Set mpdu density to 2 usec in 6g capability to meet hardware capability and also enhance throughput. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7915: disable UL MU-MIMO for mt7915Felix Fietkau1-3/+4
After initially establishing a connection, it can produce multi-second latency spikes and tx hangs when pushing traffic. It should work better for MT7916 and MT7986, so leave it enabled there Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: enable the VHT extended NSS BW featureDeren Wu1-0/+1
According IEEE Std 802.11-2020, its definition is: Indicates whether the STA is capable of interpreting the Extended NSS BW Support subfield of the VHT Capabilities Information field. Some APs, such as Xiaomi AX6000, would check this one for BW settings. mt76 driver can get max BW capability only if the this field is confgured properly. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: add support for 6G in-band discoveryMeiChia Chiu1-0/+2
Add offloading FILS discovery and unsolicited broadcast probe response support. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: move MT_INT_MASK_CSR to init.cRyder Lee1-0/+1
To avoid redundant MT_INT_MASK_CSR settings. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: disable RX_HDR_TRANS_SHORTBo Jiao1-0/+3
This patch disables RX_TRANS_SHORT to make MDP to do header translation when payload less than 8 bytes, hence the (QoS) null data can be encapsulated to 802.3 format. However, WDS requires (QoS) null data in 802.11 format to created vlan AP interfaces. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: lian.chen <lian.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: make read-only array ppet16_ppet8_ru3_ru0 static constColin Ian King1-1/+1
Don't populate the read-only array ppet16_ppet8_ru3_ru0 on the stack but instead make it static const. Also makes the object code a little smaller. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: always call mt7915_wfsys_reset() during initRyder Lee1-14/+3
Soft reboot might not clear certain condition, so always call mt7915_wfsys_reset() during init. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: rework hardware/phy initializationFelix Fietkau1-39/+65
Clean up and fix error paths in mt7915_register_device Initialize second DBDC tx queue in mt7915_dma_init Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7915: introduce 802.11ax multi-bss supportLorenzo Bianconi1-0/+2
Introduce mbss mcu APIs to enable 802.11ax multi-bss AP support for mt7915 devices Tested-by: Money Wang <money.wang@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Co-developed-by: Money Wang <money.wang@mediatek.com> Signed-off-by: Money Wang <money.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7915: fix typos in commentsJulia Lawall1-1/+1
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7915: fix phy cap in mt7915_set_stream_he_txbf_caps()Peter Chiu1-5/+20
This patch fixes performance issue of beamforming tx on bandwidth 160MHz. Fixes: 99ad32a4ca3a ("mt76: mt7915: add support for MT7986") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7915: add txpower init for 6GHzShayne Chen1-0/+2
Add support to init txpower values of 6GHz band. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7915: add 6 GHz supportMeiChia Chiu1-2/+26
Basic 6 GHz support is added to mt76. Modification includes: 1. Add 6 GHz E2P definition 2. Register 6 GHz HE cap 3. Refactor existing code of adding a STA This adds support for Wi-Fi 6E on MT7986/MT7916. Detailed link: https://www.mediatek.com/products/mediatek-filogic-830 Detailed link: https://www.mediatek.com/products/products/broadband-wifi/mediatek-filogic-630 Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <Shayne.Chen@mediatek.com> Signed-off-by: Peter Chiu <Chui-Hao.Chiu@mediatek.com> Signed-off-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: mt7915e: Enable thermal management by defaultNicolas Cavallari1-1/+2
By default, mt7915e does not enable thermal management until the default thermal zone does not reach a trip point. If the rest of the system have better cooling than the wireless hardware, then it is possible that the wireless chip can overheat while the rest of the system is fine. Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: mt7915e: Add a hwmon attribute to get the actual throttle state.Nicolas Cavallari1-9/+18
The firmware-controlled actual throttle state was previously available by reading the cooling_device, but this confused the thermal subsystem. Add a hwmon attribute to get it instead. Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: mt7915e: Fix degraded performance after temporary overheatNicolas Cavallari1-6/+11
mt7915e registers a cooling_device with wrong semantics: 1. cooling_device expect that higher states values should cool more, but mt7915e did the opposite... with the exception of state == 0, which should "disable thermal management", but does not seem to have any effect since the previous state is kept. The result is that when the thermal zone heats up a bit and bumps the cooling_device state from 0 to 1 to cool a bit, the performance is destroyed, and when going back from 1 to 0, the performance stays bad. 2. Reading the cooling_device state does not always return the last written state, but can return the actual hardware throttle state, which is different. This is a problem because the mt7915 firmware actually implement the equivalent of a thermal zone with trip points. Setting the cooling device state actually changes the throttles at each trip point, so the following could occur if the first issue is fixed: - thermal subsystem set state to 100% power (state=0) - mt7915e driver set trip throttles to [100%, 50%, 25%, 12%] - hardware heats up and decides to switch to 50% power - thermal subsystem see that power is 50% (state=50), decide to increase it to 60% (state=40) because the rest of the system is cool. - mt7915e driver set trip throttle to [60%, 30%, 15%, 7%] - hardware thus switches to 30% power [race to the bottom continues...] This patch corrects the semantics of the cooling_device to the one that the thermal subsystem expect it. Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: mt7915: introduce band_idx in mt7915_phyBo Jiao1-3/+31
The wfsys of MT7986 has only single adie chip for non-dbdc devices, and it binds to band1 by default. Hence this patch adds band_idx to explicitly configure phy accordingly. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: mt7915: add support for MT7986Bo Jiao1-2/+18
This adds MT7986 SoC integrated multi-band 4x4 WiFi 6/6E. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-16ieee80211: add EHT 1K aggregation definitionsMordechay Goodstein1-2/+2
We add the fields for parsing extended ADDBA request/respond, and new max 1K aggregation for limit ADDBA request/respond. Adjust drivers to use the proper macro, IEEE80211_MAX_AMPDU_BUF -> IEEE80211_MAX_AMPDU_BUF_HE. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Link: https://lore.kernel.org/r/20220214173004.b8b447ce95b7.I0ee2554c94e89abc7a752b0f7cc7fd79c273efea@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-03mt76: mt7915: fix/rewrite the dfs state handling logicFelix Fietkau1-6/+1
Client mode on DFS channels was broken, because the old code was activating the DFS detector on radar channels while leaving it in CAC state. This was caused by making the decision based on the channel radar flag, instead of hw->conf.radar_enabled. In order to properly deal with the various corner cases, rip out the state handling code and replace it with something that's much easier to reason about. Tested-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: enable radar background detectionLorenzo Bianconi1-0/+7
Notify userland the hw supports background radar/CAC detection. Tested-by: Owen Peng <owen.peng@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: introduce mt7915_set_radar_background routineLorenzo Bianconi1-0/+3
Introduce mt7915_mcu_rdd_background_enable and mt7915_mcu_background_chain_ctrl routines to configure rx dfs dedicated chain. This is a preliminary patch to add zero-wait dfs support performing CAC detection on rdd2. Tested-by: Owen Peng <owen.peng@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: update rx rate reporting for mt7916Bo Jiao1-1/+2
mt7916 reports rx rate from rxd group3 directly. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: enlarge wcid size to 544Bo Jiao1-1/+1
The mt7916 can support up to 544 wcid entries. This is an intermediate patch to add mt7916 support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: rework eeprom.c to adapt mt7916 changesBo Jiao1-16/+39
This is an intermediate patch to add mt7916 support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: add firmware support for mt7916Bo Jiao1-34/+34
Update firmware initialization for mt7916. This is an intermediate patch to add mt7916 support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: rework dma.c to adapt mt7916 changesBo Jiao1-1/+8
The RXQ of mt7916 are separated to MT_RXQ_MAIN_WA and MT_RXQ_MCU_WA, so, add initialization and preftech setting for the queue MT_RXQ_MAIN_WA. This is an intermediate patch to add mt7916 support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: refine register definitionBo Jiao1-3/+7
Add mt7915_reg_desc to differentiate chip generations. This is an intermediate patch to introduce mt7916 support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-11-28ieee80211: change HE nominal packet padding value definesMiri Korenblit1-1/+2
It's easier to use and understand, and to extend for EHT later, if we use the values here instead of the shifted values. Unfortunately, we need to add _POS so that we can use it in places like iwlwifi/mvm where constants are needed. While at it, fix the typo ("NOMIMAL") which also helps catch any conflicts. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/r/20211126104817.7c29a05b8eb5.I2ca9faf06e177e3035bec91e2ae53c2f91d41774@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-20mt76: mt7915: change max rx len limit of hw modulesShayne Chen1-2/+2
Update max rx len of some hw modules, which aligns out vendor SDK. In normal modes, we exchange MPDU 7991 cap with peers; however, this won't play a part in sniffer mode. To prevent packets which exceed the max MPDU size from entering specific rx path in hw, we need to set a proper limit to filter them out. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: fix missing HE phy capShayne Chen1-3/+9
Fix missing HE phy cap related to vif and starec setting. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: enable HE UL MU-MIMOShayne Chen1-2/+0
Enable HE UL MU-MIMO in sta_rec_muru, which works on both ap and station mode. For sending trigger frames, one of the conditions fw uses is to check if mib rx airtime meets the threshold. There's a main control of mib rx airtime report register in fw, so we need to enable the register by mcu cmd instead of directly writing it, otherwise it will still be disabled by fw. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: introduce mt76 debugfs sub-dir for ext-phyLorenzo Bianconi1-1/+5
Introduce a dedicated mt76 debugfs sub-dir for ext-phy in dbdc mode. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: enable twt responder capabilityLorenzo Bianconi1-0/+2
Enable TWT support in AP mode Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: introduce mt7915_mac_add_twt_setup routineLorenzo Bianconi1-0/+1
Introduce individual TWT support to mt7915 in AP mode. Implement the two following mac80211 callbacks: - add_twt_setup - twt_teardown_request Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 22:15:33 +0300