summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt76x2_init.c
AgeCommit message (Collapse)AuthorFilesLines
2018-10-05mt76x2: move mt76x2 source files to mt76x2 folderLorenzo Bianconi1-541/+0
Move mt76x2 and mt76x2u drivers to mt76x2 subfolder and leave just shared code in mt76 root folder Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: add mt76x02_mac_start routineLorenzo Bianconi1-11/+1
Introduce mt76x02_mac_start since the mac start code is shared between mt76x0e and mt76x2 drivers. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x02_beacon_offset in mt76x02_util.cLorenzo Bianconi1-40/+1
Move mt76x02_beacon_offset utility routine in mt76x02-lib module since it is shared between mt76x0 and mt76x2 driver and remove duplicated code. Moreover move beacon_offset data structure in mt76x02-lib module since it is shared between mt76x0 and mt76x2 drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move queue initialization in mt76x02_mmio.cLorenzo Bianconi1-1/+2
Move mt76x02_dma_init, mt76x02_init_rx_queue and mt76x02_init_tx_queue routines in mt76x02-lib module in order to be reused by mt76x0 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x02_set_irq_mask in mt76x02_mmio.cLorenzo Bianconi1-3/+3
Move mt76x02_set_irq_mask, mt76x02_irq_enable and mt76x02_irq_disable in mt76x02-lib module in order to be reused by mt76x0 driver. Moreover move irq_lock and irqmask in mt76_mmio data structure Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: add mt76x02_dma_enable/mt76x02_dma_disable utility routinesLorenzo Bianconi1-18/+2
Introduce mt76x02_dma_enable and mt76x02_dma_disable utility routines in order to be reused in mt76x0 mac configuration and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move wait_for_wpdma in mt76x02_dma.hLorenzo Bianconi1-1/+2
Move wait_for_wpdma utility routine in mt76x02_dma.h in order to be reused by mt76x0 driver. Moreover add the possibility to specify the timeout value in wait_for_wpdma signature Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x2_eeprom_get in mt76x02_eeprom.hLorenzo Bianconi1-3/+3
Move mt76x2_eeprom_get utility routine in mt76x02_eeprom.h since it will be used to parse mt76x0 eeprom in order to unify eeprom support between mt76x2 and mt76x0 drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-19mt76: move mt76{0,2} mcu shared code in mt76x02_mcu.cLorenzo Bianconi1-2/+2
Move shared mt76x2/mt76x0 mcu shared code in a common file and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-19mt76: move mt76 rate definitions in mt76x02-lib moduleLorenzo Bianconi1-2/+3
Move mt76x2_rate definition in mt76x02-lib module and rename it in mt76x02_rates in order to be reused in mt76x0 driver. Moreover remove unused mt76_rate definition Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-19mt76: unify txwi and rxwi structuresStanislaw Gruszka1-1/+1
txwi and rxwi are the same for mt76x0 and mt76x2. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-19mt76: unify sta_rate_tbl_update and related helpersStanislaw Gruszka1-0/+1
Use common sta_rate_tbl_update on mt76x0 and mt76x2. mt76x0 do not have support TPC (transmision power control) implmented, msta->wcid.max_txpwr_adj is only set for mt76x2. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-04mt76: unify sta structure part 2Stanislaw Gruszka1-1/+1
Second part of unifying mt76x02_sta structure between mt76x0 and mt76x2. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04mt76: unify mac_wcid_setupStanislaw Gruszka1-2/+2
Merge mt76x{0,2}_mac_wcid_setup into common code. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04mt76: unify mac_shared_key_setupStanislaw Gruszka1-1/+1
Merge mt76x{0,2} mac_shared_key_setup into common code. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04mt76: create new mt76x02-lib module for common mt76x{0,2} codeStanislaw Gruszka1-3/+2
Move rxfilter and mutex to common structure. Create mt76x02-lib.ko for mt76x0 and mt76x2 common functions and create new unified mt76x02_configure_filter() function there. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04mt76: unify wait_for_macStanislaw Gruszka1-1/+1
Create new mt76x02_mac.h for common mac functions of mt76x0 and mt76x2 and unity wait_for_mac for both drivers. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add mt76x2_init_common to mt76x2-common moduleLorenzo Bianconi1-238/+0
Move init related code shared between mt76x2 and mt76x2u in mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add mt76x2_mac_common to mt76x2-common moduleLorenzo Bianconi1-35/+0
Move mac related code shared between mt76x2 and mt76x2u in mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x2: move interface_modes definition in mt76x2_initLorenzo Bianconi1-0/+8
Move wiphy interface_modes definition in mt76x2_init in order to reuse mt76_register_device routine supporting mt76x2u based chipsets since mt76x2u currently supports just sta mode Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x2: introduce mt76x2_init_device routineLorenzo Bianconi1-26/+32
Add mt76x2_init_device routine in order to reuse common pcie/usb mac80211 initialization code supporting mt76x2u based device Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x2: move utility routines in mt76x2.hLorenzo Bianconi1-28/+0
In order to reuse them supporting mt76x2u based devices, move mt76x2_wait_for_mac, wait_for_wpdma and mt76x2_channel_silent in mt76x2.h Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-30mt76x2: fix CCK protection control frame rateLorenzo Bianconi1-3/+9
Use 11M as tx rate for CCK protection control frames Fixes: 7bc04215a66b ("mt76: add driver code for MT76x2e") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mt76: use udelay instead of usleep_range in mt76x2_mac_stopFelix Fietkau1-1/+1
usleep_range can cause excessive latency on channel change if waiting for the MAC to stop fails. It will be forced to stop by the code following that loop anyway. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mt76: move ieee80211_hw allocation to common coreFelix Fietkau1-8/+6
Allows it to be shared between different drivers and locks to be initialized earlier Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mt76: fix sending encrypted broadcast packets for secondary interfacesFelix Fietkau1-0/+3
For encryption to work properly, the BSS index needs to be initialized for the WCID entry used for the interface. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mt76x2: apply coverage class on slot time tooLorenzo Bianconi1-0/+3
According to 802.11-2007 17.3.8.6 (slot time), the slot time should be increased by 3 us * coverage class. Taking into account coverage class in slot time configuration allows to increase by an order of magnitude the throughput on a 4Km link in a noisy environment Tested-by: Luca Bisti <luca.bisti@gmail.com> Tested-by: Gaetano Catalli <gaetano.catalli@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12mt76x2: add a polling delay in mt76x2_mac_stop routineLorenzo Bianconi1-5/+5
Add a usleep_range in mt76x2_mac_stop routine in order to add a polling delay checking values of MT_MAC_STATUS and IBI_R12 registers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mt76: fix concurrent rx calls on A-MPDU releaseFelix Fietkau1-0/+1
Add a spinlock in mt76_rx_complete. Without this, multiple stats updates could happen in parallel, which can lead to deadlocks. There are probably more corner cases fixed by this change. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24mt76x2: make mt76x2_mac_reset routine staticLorenzo Bianconi1-1/+1
Add static qualifier to mt76x2_mac_reset routine and remove the prototype from mt76x2_mac.h since it is used just in mt76x2_init.c Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13mt76: initialize available_antennas_{tx,rx} infoLorenzo Bianconi1-0/+3
Initialize available_antennas related info in wiphy data structure according to antenna_mask field; antenna_mask info is initialized in device specific code and will be used in mac80211 {set,get}_antenna callbacks Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-01mt76: implement AP_LINK_PSFelix Fietkau1-0/+1
With software A-MPDU reordering in place, frames that notify mac80211 of powersave changes are reordered as well, which can cause connection stalls. Fix this by implementing powersave state processing in the driver. Fixes: aee5b8cf2477 ("mt76: implement A-MPDU rx reordering in the driver code") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-26mt76: validate rx CCMP PNFelix Fietkau1-1/+1
Apparently hardware does not perform CCMP PN validation in hardware, so we need to take care of this in the driver. This is important for protecting against replay attacks. Since validation of fragmented frames is more complex, the CCMP header for those is preserved. To keep the counter in sync, the first fragment is verified by both mt76 and mac80211, and all other fragments only by mac80211. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-26mt76: implement A-MPDU rx reordering in the driver codeFelix Fietkau1-0/+2
This is required for performing CCMP PN validation in software Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24mt76x2: init: disable all pending tasklets during device removalLorenzo Bianconi1-0/+2
There is a possible race in mt76x2_stop_hardware() since pre_tbtt and dfs tasklets could run during driver cleanup. Fix it disabling all pending tasklets during device removal Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24mt76x2: dfs: add set_domain handlerLorenzo Bianconi1-1/+1
Add mt76x2_dfs_set_domain routine in order to properly reconfigure pattern detector when DFS domain has been changed Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08mt76x2: init: fix rx filter default value during initLorenzo Bianconi1-1/+2
mt76x2_mac_start writes dev->rxfilter to the hardware. It also happens during init, before dev->rxfilter is filled with the initval register value, leading to issues like promisc mode being enabled unconditionally. Fix this by reading the default value into dev->rxfilter earlier Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08mt76x2: init: disable APCLI by defaultLorenzo Bianconi1-2/+0
It is no longer necessary for client mode operation, vif index entries 8-16 are no longer used Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08mt76x2: convert between per-chain tx power and combined outputFelix Fietkau1-0/+3
Using both chains adds max. 3 dBm. A similar worst-case calculation is being used in ath9k as well to ensure that the hardware stays within regulatory limits Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08mt76x2: initialize channel power limits at probe timeFelix Fietkau1-0/+30
This allows user space to query the real hardware limits directly Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07mt76: add driver code for MT76x2eFelix Fietkau1-0/+839
MT76x2e is a 2x2 PCIe 802.11ac chipset by MediaTek. This driver has full support for AP, station, ad-hoc, mesh and monitor mode. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-15 08:02:15 +0300