summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt76x0/pci.c
AgeCommit message (Collapse)AuthorFilesLines
2019-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+14
Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05mt76: add default implementation for mt76_sw_scan/mt76_sw_scan_completeLorenzo Bianconi1-1/+1
Introduce a default implementation for mt76_sw_scan and mt76_sw_scan_complete in mt76 module and remove duplicated code since most of the drivers share the same implementation Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: switch to SPDX tag instead of verbose boilerplate textRyder Lee1-12/+1
No functional change intended. Add SPDX identifiers to all remaining files in /mt76. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-03mt76: mt76x0e: don't use hw encryption for MT7630EStanislaw Gruszka1-1/+14
Since 41634aa8d6db ("mt76: only schedule txqs from the tx tasklet") I can observe firmware hangs on MT7630E on station mode: tx stop functioning after minor activity (rx keep working) and on module unload device fail to stop with messages: [ 5446.141413] mt76x0e 0000:06:00.0: TX DMA did not stop [ 5449.176764] mt76x0e 0000:06:00.0: TX DMA did not stop Loading module again results in failure to associate with AP. Only machine power off / power on cycle can make device work again. It's unclear why commit 41634aa8d6db causes the problem, but it is related to HW encryption. Since issue is a firmware hang, that is super hard to debug, just disable HW encryption as fix for the issue. Fixes: 41634aa8d6db ("mt76: only schedule txqs from the tx tasklet") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-01mt76: move pre_tbtt_tasklet in mt76_devLorenzo Bianconi1-1/+1
Move pre_tbtt_tasklet tasklet in mt76_dev data structure since it is used by all drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: mt76x02: remove bogus mutex usageStanislaw Gruszka1-6/+0
mac80211 .start(), .stop() callbacks are never called concurrently with other callbacks. The only concurencly is with mt76 works which we cancel on stop() and schedule on start(). This fixes possible deadlock on cancel_delayed_work_sync(&dev->mac_work) as mac_work also take mutex. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: move mac_work in mt76_devLorenzo Bianconi1-2/+2
Move mac_work delayed work in mt76_dev data structure since it is used by all drivers and it will be reused adding mac work to mt7615 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: introduce mt76_free_device routineLorenzo Bianconi1-1/+1
Move mt76_tx_free in mt76_free_device routine in order to unmap all txwi descriptors at module unload Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: unify set_timStanislaw Gruszka1-8/+1
All mt76 drivers (now also USB drivers) require empty .set_tim callback. Add it to common mt76 module and use on all drivers. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76x02: introduce mt76x02_beacon.cStanislaw Gruszka1-0/+2
Move most of beaconing code into separate file and separate beacon initialization for USB and MMIO as pre TBTT implementation for USB will be different. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: mmio: move mt76_insert_hdr_pad in mt76_dma_tx_queue_skbLorenzo Bianconi1-0/+1
Introduce tx_aligned4_skbs in mt76_driver_ops and move mt76_insert_hdr_pad in mt76_dma_tx_queue_skb. This is a preliminary patch in order to unify tx dma mapping for mt76x02 and new chipsets Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x0: remove mt76x0u_alloc_device routineLorenzo Bianconi1-6/+11
Remove mt76x0u_alloc_device since it just runs mt76_alloc_device. Move mt76_alloc_device call in mt76x0u_probe and in mt76x0e_probe Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: run MAC work every 100msFelix Fietkau1-1/+1
ED/CCA Tx blocking checks need to be run every 100 ms in order to avoid triggering too late and keeping tx blocking on for too long Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-01-17mt76: move mt76x02_get_txpower to mt76 coreFelix Fietkau1-1/+1
It will be reused by mt7603 later Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-01-11mt76: add energy detect CCA support to mt76x{0,2}e driversLorenzo Bianconi1-0/+1
Ported from the reference driver. Should fix compliance with ETSI regulatories on preventing transmission while energy detect values are above the threshold. The code has been tested using an ath9k device running tx99 as noise generator Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-01-11mt76x0: pci: fix ACS supportLorenzo Bianconi1-0/+8
Fix Automatic Channel Selection (ACS) support in mt76x0e driver configuring properly MT_CH_TIME_CFG register Fixes: 6250318694ca ("mt76x0: pci: add get_survey support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: replace sta_add/remove ops with common sta_state functionFelix Fietkau1-2/+3
Allows adding unassociated stations from mac80211 Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
2018-11-30mt76: move mt76x02_bss_info_changed in mt76x02-lib moduleLorenzo Bianconi1-1/+1
Unify drv_bss_info_changed mac80211 callback and remove duplicated code in mt76x0 and mt76x2 drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move tx protection routines in mt76x02-lib moduleLorenzo Bianconi1-0/+1
Move mt76x02_set_rts_threshold and mt76x02_mac_set_tx_protection routines in mt76x02-lib module and remove duplicated code in mt76x0 and mt76x2 drivers. Remove pci_mac.c and mt76x0/mac.c since now are empty files Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move mt76x02_set_tx_ackto in mt76x02-lib moduleLorenzo Bianconi1-0/+1
Move mt76x02_set_tx_ackto and mt76x02_set_coverage_class routines in mt76x02-lib module in order to be reused by mt76x0 driver. This is a preliminary patch to unify drv_bss_info_changed mac80211 callback between mt76x0 and mt76x2 drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: pci: enable AP supportLorenzo Bianconi1-0/+17
Add missing mac80211 callbacks to mt76x0e_ops data structure and add mt76x02_beacon utility routines in mt76x0_bss_info_changed in order to enable/disable beacon transmission Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move mt76x02_sta_ps in mt76x02-lib moduleLorenzo Bianconi1-0/+1
Move mt76x02_sta_ps utility routine in mt76x02_util.c in order to be reused by mt76x0 driver adding AP support Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move mt76x02_get_txpower in mt76x02_util.cLorenzo Bianconi1-0/+1
Move mt76x02_get_txpower utility routine in mt76x02-lib module in order to be reused by mt76x0 and mt76x2u drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move mt76x02_sw_scan and mt76x02_sw_scan_complete in mt76x02-lib moduleLorenzo Bianconi1-2/+2
Move mt76x02_sw_scan and mt76x02_sw_scan_complete utility routines in mt76x02_util.c in order to be reused by mt76x0 and mt76x2u drivers and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: pci: add pre_tbtt_tasklet supportLorenzo Bianconi1-0/+1
Enable/disable pre_tbtt_tasklet in mt76x0 driver in order to add AP support Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: pci: add missing MODULE_FIRMWARE macroLorenzo Bianconi1-0/+2
Add missing firmware declaration for mt76x0e driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: pci: add get_survey supportLorenzo Bianconi1-0/+2
Move mt76x02_update_channel routine in mt76x02-lib module in order to be reused by mt76x0 driver adding get_survey support Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: introduce mt76x0_phy_calirate routineLorenzo Bianconi1-0/+1
Add mt76x0_phy_calirate routine in order to perform phy calibration for mt76x0e devices. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: mt76x0e: another fix for the external PA current settingFelix Fietkau1-10/+3
- Use the register number define instead of a magic value - Fix inverted bit test (override needs to be applied if the bit is not set) Fixes: 2b2cb40bcd7d ("mt76x0: pci: add hw initialization at bootstrap") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: fix set external PA I/O currentYueHaibing1-3/+3
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/mediatek/mt76/mt76x0/pci.c: In function 'mt76x0e_register_device': drivers/net/wireless/mediatek/mt76/mt76x0/pci.c:107:8: warning: variable 'data' set but not used [-Wunused-but-set-variable] It seems correct value to write is 'data' Fixes: 2b2cb40bcd7d ("mt76x0: pci: add hw initialization at bootstrap") Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: add mt76x0_register_device in mt76x0e_register_deviceLorenzo Bianconi1-1/+19
Run mt76x0_register_device routine in mt76x0e_register_device in order to register the device to the mac80211 layer. Moreover init mt76_driver_ops data structure and register interrupt line Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: add missing mac80211 callbacksLorenzo Bianconi1-1/+10
Add missing mac80211 callbacks in mt76x0e_ops data structure Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_eeprom.cLorenzo Bianconi1-1/+1
Use mt76x02_dev data structure as reference in mt76x02_eeprom.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mcu.cLorenzo Bianconi1-1/+1
Use mt76x02_dev data structure as reference in mt76x02_mcu.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: move tx_tasklet management in mt76x02-lib moudleLorenzo Bianconi1-1/+1
Move tx_tasklet management in mt76x02_mmio.c in order to be reused by mt76x0 driver and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mmio.cLorenzo Bianconi1-3/+3
Use mt76x02_dev data structure as reference in mt76x02_mmio.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: rename mt76x02_util.h in mt76x02.hLorenzo Bianconi1-2/+0
Rename mt76x02_util.h header file in mt76x02.h since now contains all mt76x02 related definitions and not just utility routines declarations Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: move mt76x02_tx in mt76x02-lib moduleLorenzo Bianconi1-1/+1
Move mt76x02_tx shared routine in mt76x02-lib module and remove duplicated code. Moreover remove mt76x0/tx.c since it is an empty file Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76x0: merge mt76x0_dev in mt76x02_devLorenzo Bianconi1-8/+8
Merge mt76x0_dev data structure in mt76x02_dev one and remove duplicated code. Remove unused definition in mt76x0.h. Moreover merge mt76x0_caldata and mt76x02_rx_freq_cal data structures. This is a preliminary patch for rxwi unification. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76x0: pci: add mt76x0e_cleanup routineLorenzo Bianconi1-6/+20
Add mt76x0e_cleanup routine to tidy up the device during device removal Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: pci: add mt76x0e_{start/stop} callbacksLorenzo Bianconi1-0/+34
Introduce mt76x0e_start and mt76x0e_stop mac80211 callbacks to start/stop device mac opening/closing the netdevice Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: add ieee80211_ops ops pointer to mt76x0_alloc_device signatureLorenzo Bianconi1-1/+21
Add ieee80211_ops ops pointer to mt76x0_alloc_device routine signature in order to specify mac80211 callbacks and remove usb dependency from mt76x0 generic code. Move mt76x0_ops callbacks in usb module in order to remove leftover usb dependency in mt76x0 generic code. Introduce mt76x0e_ops mac80211 callbacks for pci code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: pci: add hw initialization at bootstrapLorenzo Bianconi1-1/+46
Add mt76x0e_register_device routine in pci.c to initialize the device during hw probe. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: pci: move mcu code in pci_mcu.cLorenzo Bianconi1-112/+1
Move pci mcu code in a dedicated source file in order to improve maintainability and facilitate new device support development Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: pci: add fw uploading routineLorenzo Bianconi1-1/+119
Add pci load firmware routine. Move some shared mcu definitions in mt76x02_mcu.h Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: pci: add mt7650 PCI IDLorenzo Bianconi1-0/+1
Add mt7650 PCI id found on ASUS rt-51ac to pci_device_id table Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-19mt76x0: make device allocation bus neutralStanislaw Gruszka1-1/+1
Remove some USB specific code form mt76x0_alloc_device. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-19mt76x0: inital split between pci and usbStanislaw Gruszka1-0/+81
For now pci driver can read ASIC version from the device :-) Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 06:21:18 +0300