summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
AgeCommit message (Collapse)AuthorFilesLines
2017-05-31mwifiex: usb: transmit aggregation packetsXinming Hu1-0/+18
Instead of using 4KB packet buffer for data transfer, new chipset have more device memory. This patch try to aggregation packets in an 16KB buffer. In this way, totally usb transaction cost will be reduced. Thoughput test on usb 2.0 show both TCP TX and UPD TX promote ~40M, from ~240M to ~280M. This feature is default disabled, and can be enabled by module parameter, like: insmod mwifiex.ko aggr_ctrl=1 Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05mwifiex: enable auto deep sleep mode for USB chipsetsAmitkumar Karwar1-2/+1
Chip goes into low power state when this feature is enabled. This was already enabled for SDIO and PCIe interface based chipsets. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-03-20mwifiex: fix for unaligned readsDevidas Puranik1-9/+10
Using the accessor function e.g. get_unaligned_le32 instead of le32_to_cpu to avoid the unaligned access. This is for the architectures that don't handle the unaligned memory access Signed-off-by: Devidas Puranik <devidas@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-03-20mwifiex: Use accessors routines for unaligned valuesDaniel Mentz1-13/+17
Synopsys' ARCompact architecture does not support loading from or storing values to unaligned memory locations. We saw a series of misaligned access exceptions on ARC. To work around this issue, we bulk replaced le16_to_cpu and le32_to_cpu with get_unaligned_le16 and get_unaligned_le32, respectively. We also added le16_unaligned_add_cpu which is similar to le16_add_cpu but works with unaligned values. Signed-off-by: Daniel Mentz <danielmentz@google.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30mwifiex: change width of MAC control variableAmitkumar Karwar1-2/+2
Firmware has started making use of reserved field. Accordingly change curr_pkt_filter from u16 to u32. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-05mwifiex: clean up some messy indentingDan Carpenter1-2/+2
These lines were indented one tab extra. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29mwifiex: Remove unused 'sta_ptr' variableKirtika Ruchandani1-2/+0
Commit 429d90d2212b introduced mwifiex_cmd_tdls_oper() which initializes struct mwifiex_sta_node* sta_ptr, but does not use it. Compiling with W=1 gives the following warning, fix it. mwifiex/sta_cmd.c: In function ‘mwifiex_cmd_tdls_oper’: mwifiex/sta_cmd.c:1732:27: warning: variable ‘sta_ptr’ set but not used [-Wunused-but-set-variable] Fixes: 429d90d2212b ("mwifiex: add cfg80211 tdls_oper handler support") Cc: Avinash Patil <patila@marvell.com> Signed-off-by: Kirtika Ruchandani <kirtika@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-25mwifiex: Disable adhoc feature based on firmware capabilityKarthik D A1-11/+25
We will read fw_cap_info filled by firmware to check whether to skip ADHOC related commands or not. Also, IBSS_COALESCING_STATUS command has been moved from init path to adhoc network creation path. Signed-off-by: Karthik D A <karthida@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-19mwifiex: Introduce mwifiex_probe_of() to parse common propertiesRajat Jain1-4/+1
Introduce function mwifiex_probe_of() to parse common properties. Interface drivers get to decide whether or not the device tree node was a valid one (depending on the compatible property), Lets fill "adapter->dt_node" in mwifiex_add_card(). The function mwifiex_probe_of() is currently only a place holder with the next patch adding content to it. Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-19mwifiex: parse device tree node for PCIeXinming Hu1-1/+2
This patch derives device tree node from pcie bus layer framework. Device tree bindings file has been renamed(marvell-sd8xxx.txt -> marvell-8xxx.txt) to accommodate PCIe changes. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-18mwifiex: ignore calibration data failureAmitkumar Karwar1-11/+5
Firmware may reject calibration data from host for certain OTP settings. In that case, we should continue initialisation ignoring the failure. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-18mwifiex: add power save parameters in hs_cfg cmdShengzhen Li1-6/+23
This patch adds power save parameters(hs_wake_interval and hs_inactivity_timeout) in host sleep cfg cmd. Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26mwifiex: cfg80211 set_default_mgmt_key handlerGanapathi Bhat1-0/+5
Previously device used to start using IGTK key as Tx key as soon as it gets downloaded in add_key(). This patch implements set_default_mgmt_key handler. We will update Tx key ID in set_default_mgmt_key(). Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: add CHAN_REGION_CFG commandAmitkumar Karwar1-0/+21
This patch adds command preparation and response handling for CHAN_REGION_CFG command. These changes are prerequisites for adding custom regulatory domain support. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: key_material_v2 remove superfluous conditionHeinrich Schuchardt1-8/+3
We are using mac as source address in a memcpy. In the lines below we can assume mac is not NULL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: remove superfluous conditionHeinrich Schuchardt1-1/+1
for_each_property_of_node is only executed if the property prop is not NULL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: Fixed endianness problem for big endian platformKarthik D A1-12/+15
The driver sends and recives information to and from the firmware. Correct endianness should be ensured as firmware follows little endian format and host can be little/big endian. Signed-off-by: Karthik D A <karthida@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-18mwifiex: Reduce endian conversion for REG Host CommandsPrasun Maiti1-16/+12
For multiple REG Host Commands (e.g HostCmd_CMD_802_11_EEPROM_ACCESS, HostCmd_CMD_MAC_REG_ACCESS etc.) "cpu_to_leX"-converted values are saved to driver. So, "leX_to_cpu" conversion is required too many times afterwards in driver. This patch reduces the endian: conversion without saving "cpu_to_leX" converted values in driver. This will convert endianness in prepare command and command response path. Signed-off-by: Prasun Maiti <prasunmaiti87@gmail.com> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-05mwifiex: add get_antenna support for cfg80211Shengzhen Li1-16/+34
Since commit de3bb771f471 ("cfg80211: add more warnings for inconsistent ops") the wireless core warns if a driver implements a cfg80211 callback but doesn't implements the inverse operation. The mwifiex driver defines a .set_antenna handler but not a .get_antenna so this not only makes the core to print a warning when creating a new wiphy but also the antenna isn't reported to user-space apps such as iw. This patch queries the antenna to the firmware so is properly reported to user-space. With this patch, the wireless core does not warn anymore and: $ iw phy phy0 info | grep Antennas Available Antennas: TX 0x3 RX 0x3 Configured Antennas: TX 0x3 RX 0x3 Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> [javier: expand the commit message] Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26mwifiex: add platform specific wakeup interrupt supportXinming Hu1-3/+11
On some arm-based platforms, we need to configure platform specific parameters by device tree node and also define our node as a child node of parent SDIO host controller. This patch parses these parameters from device tree. It includes calibration data dowoload to firmware, wakeup pin configured to firmware, and soc specific wake up gpio, which will be set as wakeup interrupt pin. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: add support for GTK rekey offloadGanapathi Bhat1-0/+28
Added driver functionality to offload GTK rekey to firmware. When AP sends new GTK, firmware will update it. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-29mwifiex: report wakeup reason to cfg80211chunfan chen1-0/+19
This patch adds code to report wakeup reason to cfg80211 when system is resumed. Signed-off-by: chunfan chen <jeffc@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-29mwifiex: add schedule scan supportXinming Hu1-0/+4
This patch add sched scan support for mwifiex, include cfg80211 sched_scan_start/sched_scan_stop handler, corresponding bgscan command path and event handler. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: chunfan chen <jeffc@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18mwifiex: move under marvell vendor directoryKalle Valo1-0/+2282
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 01:59:32 +0300