summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/libertas/dev.h
AgeCommit message (Collapse)AuthorFilesLines
2008-01-29libertas: kill TxLockFlagDavid Woodhouse1-1/+0
We don't need this. We can use adapter->currenttxskb instead. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: fix lbs_rtap attribute in sysfsDavid Woodhouse1-2/+0
At least it doesn't oops when you attempt to read or write it now. Only when you enable it and then later turn it off. And when it's enabled I don't see how it actually works. But one fewer oops is good, for now... Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: kill adapter->nr_cmd_pendingDavid Woodhouse1-1/+0
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: implement new scanning logicHolger Schurig1-2/+1
This changes the code that is used for scanning and makes it hopefully easier to understand: * move function into logical blocks * create a bunch of lbs_scan_add_XXXX_tlv() functions, that help to create the TLV parameter of CMD_802_11_SCAN * all of them are now called from the much simpler lbs_do_scan() * no **puserscancfg double-pointers :-) Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: remove arbitrary typedefsHolger Schurig1-7/+7
New typedefs are usually frowned upon. This patch changes libertas_adapter -> struct libertas_adapter libertas_priv -> struct libertas_priv While passing, make everything checkpatch.pl-clean that gets touches. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: configurable beacon intervalBrajesh Dave1-0/+2
Requires firmware version 5.110.19.p0 or newer, available here: http://dev.laptop.org/pub/firmware/libertas/ Signed-off-by: Ashish Shukla <ashishs@marvell.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: separate mesh connectivity from that of the main interfaceBrajesh Dave1-0/+1
The transmit and receive traffic as soon as the mesh interface is brought up. Test case 1: Bring up only the mesh interface and ping. No need for any iwconfig commands on the main interface. $ ifconfig msh0 192.168.5.3 $ iwconfig msh0 channel X $ ping 192.168.5.2 If ping succeeds, PASS Test case 2: Associate with the main interface, and turn off AP. Mesh interface should not lose connectivity. $ iwconfig eth0 mode managed essid "my_ssid" $ ifconfig msh0 192.168.5.3 $ ping 192.168.5.2 <turn off access point> If ping continues uninterrupted, PASS This feature requires firmware version 5.110.19.p0 or newer, available here: http://dev.laptop.org/pub/firmware/libertas/ Signed-off-by: Ashish Shukla <ashishs@marvell.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: move to uniform lbs_/LBS_ namespaceHolger Schurig1-21/+21
This patch unifies the namespace of variables, functions defines and structures. It does: - rename libertas_XXX to lbs_XXX - rename LIBERTAS_XXX to lbs_XXX - rename wlan_XXX to lbs_XXX - rename WLAN_XXX to LBS_XXX (but only those that were defined in libertas-local *.h files, e.g. not defines from net/ieee80211.h) While passing, I fixed some checkpatch.pl errors too. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: reorganize and simplify init sequenceDan Williams1-4/+0
This patch moves all firmware load responsibility into the interface-specific code and gets rid of the firmware pointer in the generic card structure. It also removes 3 fairly unecessary callbacks: hw_register_dev, hw_unregister_dev, and hw_prog_firmware. It also makes the init sequence from interface probe functions more logical, as there are paired add/remove and start/stop calls into generic libertas code. Because the USB driver code uses the same TX URB callback for both firmware upload (where the generic libertas structure isn't initialized yet) and for normal operation (where it is), some bits of USB code have to deal with 'priv' being NULL. All USB firmware upload bits have been changed to not require 'priv' at all, but simply the USB card structure. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: pass boot2 version to firmwareLuis Carlos Cobo1-0/+1
Boot2 version used to be hardcoded in the uploaded firmware, this patch preserves the boot2 version before uploading firmware and sends it to the firmware again on resume. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: push WEXT scan requests to a work queueDan Williams1-1/+2
Push WEXT scan requests to a workqueue and have each partial scan queue the next part, then only report results when the complete scan has finished. Full scans don't go through the work queue. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: monitor mode support for OLPC firmwareLuis Carlos Cobo1-3/+4
Driver support for the monitor mode support that will be available in the next OLPC 'bleeding edge' Marvell firmware release (most likely, 5.110.16.p2). To activate monitor mode, echo mode > /sys/class/net/{ethX,mshX}/device/libertas_rtap where mode is the hex mask that specifies which frames to sniff (in short, 0x1 for data, 0x2 for all management but beacons, 0x4 for beacons). Any non zero mode will activate the monitor mode, inhibiting transmission in ethX and mshX interfaces and routing all the incoming traffic to a new rtapX interface that will output the packets in 802.11+radiotap headers format. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: keep mesh autostart enabled while asleepLuis Carlos Cobo1-0/+1
After loading the firmware, mesh autostart will be disabled. After that, the user will still be able to enable or disable it at will. On suspend, it will be always activated and later on resume it will go back to the state it had before going to sleep. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove adapter->scantypeHolger Schurig1-2/+0
scantype was initialized with CMD_SCAN_TYPE_ACTIVE, but there is no code that would ever change it, so we can use that variable directly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove adapter->scanmodeHolger Schurig1-1/+0
scanmode was initialized with CMD_BSS_TYPE_ANY, but there is no code that ever can store another value there, so it can go away. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove adapter->beaconperiodHolger Schurig1-1/+0
beaconperiod was initialized with MRVDRV_BEACON_INTERVAL, but there is no code that would ever change it's value. We can use the define directly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove adapter->adhoc_grate_enabledHolger Schurig1-2/+0
The variable was initialized with 0 (false). There is no code that would ever change it, so we can use the false-patch directly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove adapter->listenintervalHolger Schurig1-1/+0
listeninterval was initialized with MRVDRV_DEFAULT_LISTEN_INTERVAL, but there exists that would ever change it. So we can use this define directly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove adapter->regiontableindexHolger Schurig1-1/+0
The value was computed, but then never used. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove adapter->atimwindowHolger Schurig1-1/+0
This varaible was initialized with 0 but there is no code that would ever change it's value. So it can go away. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove adapter->multipledtimHolger Schurig1-1/+0
multipledtim was initialized with MRVDRV_DEFAULT_MULTIPLE_DTIM and then kept at that value, so we could use that define directly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove adapter->locallistenintervalHolger Schurig1-1/+0
locallisteninterval was initialized with 0, but there is no code that changes it, rendering it rather useless. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove adapter->nullpktintervalHolger Schurig1-1/+0
No code ever initialized this variable, so it was 0 because of kzalloc(). But no other code changes it, making it rather useless. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove adapter->{data,bcn}_avg_factorHolger Schurig1-2/+0
Those two variables were initialized with some default values, but there is no code that would ever change them. So we could use as well the defaults directly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove adapter->rxpd_rateHolger Schurig1-1/+0
No code uses the contents of this variable, so it can go. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove adapter->txrateHolger Schurig1-1/+0
The value of txrate was only set by a CMD_802_11_TX_RATE_QUERY command, but there was no code in the driver that ever issued this command. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove adapter->pkttxctrlHolger Schurig1-2/+0
The variable was initialized to 0 and nowhere else changed, so basically the per-packet TX control wasn't used. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove adapter->scanprobesHolger Schurig1-1/+0
The variable was initialized to 0 and nowhere else to anything different. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove adapter->prescanHolger Schurig1-1/+0
The value 1 was assigned to it and there was nowhere any code that would have changed that to 0. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove adapter->{rx,tx}antennaHolger Schurig1-6/+0
There was nowhere any code that used the values of those variables. This patch also removes two static functions that are now unused. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove unused adapter->prev_XXXX variablesHolger Schurig1-4/+0
There were just used in some debug output, but nowhere else. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove debugmodeHolger Schurig1-1/+0
There is nowhere any place that set's this variable. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: simplify and clean up data rate handlingDan Williams1-11/+5
Remove unused/duplicated fields and consolidate static data rate arrays, for example the libertas_supported_rates[] and datarates[] arrays in the bss_descriptor structure, and the libertas_supported_rates field in the wlan_adapter structure. Introduce libertas_fw_index_to_data_rate and libertas_data_rate_to_fw_index functions and use them everywhere firmware requires a rate index rather than a rate array. The firmware requires the 4 basic rates to have the MSB set, but most other stuff doesn't, like WEXT and mesh ioctls. Therefore, only set the MSB on basic rates when pushing rate arrays to firmware instead of doing a ton of (rate & 0x7f) everywhere. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: remove thread.h and make kthread usage clearerDan Williams1-2/+2
Remove the thread.h abstractions and opencode kthread stuff to make it clearer. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: rename WLAN_802_11_KEY to enc_key and clean up usageDan Williams1-6/+6
It doesn't touch hardware and therefore doesn't need endian notations either. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[PATCH] libertas: kill ieeetypes_capinfo bitfield, use ieee80211.h typesDan Williams1-1/+1
Use standard BSS capability field constants from ieee80211.h. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-12[PATCH] libertas: pull current channel from firmware on mesh autostartLuis Carlos Cobo Rus1-0/+1
Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: remove structure WLAN_802_11_SSID and libertas_escape_essidDan Williams1-4/+7
Replace WLAN_802_11_SSID with direct 'ssid' and 'ssid_len' members like ieee80211. In the process, remove private libertas_escape_essid and depend on the ieee80211 implementation of escape_essid instead. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: don't byte-swap firmware version number. It's a byte array.David Woodhouse1-1/+1
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: make association paths consistentDan Williams1-12/+15
The BSS to associate with (in either Infrastructure or IBSS join operations) is now stored in _one_ place in the association request (the bss member), not two places as before (pattemptedbss and curbssparams->bssdescriptor). Association requests are passed to the necessary association functions to (a) give them access to the bss member and (b) ensure that association/join/start setup uses settings from the request, not the current adapter settings (which may not be valid for the requested settings). Because the 'bss' member of the association request is used now, the command return functions from associate and adhoc join/start need access to the in-progress association request to update curbssparams when everything is done. The association worker moves the request from pending to in-progress for the duration of the association attempt. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: move channel changing into association frameworkDan Williams1-1/+0
Handle channel changes through the deferred association framework rather than directly. Fixes errors when setting channels along with other parameters like mode and SSID. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: make scan result handling more flexibleDan Williams1-2/+4
- use a linked list for scan results - age scan results - pass bss_descriptors around instead of indexes into the scan table - lock access to the scan results - stop returning EAGAIN from SIOCGIWSCAN handler Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: remove unused variables in wlan_dev_tHolger Schurig1-26/+14
Actually, this patch removev wlan_dev_t totally and puts the used variables of it directly into wlan_private. That reduces one level of indirection and looks a little bit simpler. It's now "priv->card" and not "priv->wlan_dev.card" and "priv->dev" instead of "priv->wlan_dev.netdev" Changed two occurences of "((wlan_private *) dev->priv)->wlan_dev.netdev" into "dev", because I didn't see the point in doing pointer-ping-pong. The variables "ioport", "upld_rcv" and "upld_type" where unused. They have been removed. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: indirect all hardware access via hw_XXXX functionsHolger Schurig1-0/+8
This functions makes all libertas_sbi_XXX functions static to the if_usb.c file and renames them to if_usb_XXXX(). The get called from other places of the source code via priv->hw_XXXX(). Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: added transmission failures to mesh statisticsJavier Cardona1-0/+1
Added transmission failures to mesh statistics. Removed whitespace before newlines. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: scan two channels per scan commandMarcelo Tosatti1-0/+2
Scan two channels per each command on set_scan(), then bail out and let get_scan() continue the scanning work up to the last channel. This gives time to the firmware so it can go back to the association channel and keep the connection alive. Fixes http://dev.laptop.org/ticket/841 Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-11[PATCH] libertas: remove WLAN_802_11_NETWORK_INFRASTRUCTURE enumDan Williams1-2/+3
Use standard IW_MODE_* constants instead. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-11[PATCH] libertas: remove WLAN_802_11_WEP_STATUS enumDan Williams1-1/+1
Also change WEPstatus to "wep_enabled"; it's clearer and consistent with the WPAenabled and WPA2enabled members. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-11[PATCH] libertas: remove WLAN_802_11_AUTHENTICATION_MODEDan Williams1-1/+1
Remove WLAN_802_11_AUTHENTICATION_MODE enum and use IW_AUTH_ALG_* instead. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-11[PATCH] libertas: remove custom encryption mode stuffDan Williams1-1/+0
Remove setencryptionmode private ioctl and Encryptionmode variable. Mostly unused, and its functionality is provided by other internal members like WEPstatus, WPAenabled, WPA2enabled, and SIOCSIWGENIE. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-31 07:54:59 +0300