summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/libertas/cmdresp.c
AgeCommit message (Collapse)AuthorFilesLines
2008-06-03libertas: rate adaptation configuration via iwconfig.Javier Cardona1-20/+0
Implemented rate adaptation support via 'iwconfig rate' API. It is now possible to specify a bit-rate value and append 'auto'. That will configure rate adaptation to use all bit-rates equal or lower than than selected value. Made lbs_cmd_802_11_rate_adapt_rateset a direct command. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-22libertas: fix multicast filtering on eth and msh interfacesDavid Woodhouse1-1/+0
We weren't properly handling multicast on the mesh interface. Fix that, which involves setting up the hardware to use the union of dev->mc_list for both eth%d and msh%d devices. This means we can't do it directly from ->set_multicast_list() because we'd need to lock the other device to read its list, and we can't do that because it might deadlock. So punt the actual work to keventd. Also, invoke the same when taking an interface down; for some reason the core calls ->set_multicast_list while IFF_UP is still set in dev->flags when we're taking it down, so its addresses don't get removed then. We also convert MAC_MULTICAST_ADR to a direct command while we're at it, removing one more entry from the big switch statement in the deprecated lbs_prepare_and_send_command() function. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-22libertas: Increase priority of 'unknown command' warningsDavid Woodhouse1-2/+2
Using the deprecated lbs_prepare_and_send_command() function for a command which it doesn't understand is an error; complain loudly about it even when we're not debugging. The mesh stats bug, where we converted MESH_ACCESS to a direct command but accidentally missed one user which was still trying to do it through lbs_prepare_and_send_command(), would have been caught a lot quicker if we'd done this sooner. Such bugs aren't entirely unlikely in future too, as we convert more code to stop using this function. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16libertas: convert libertas driver to use an event/cmdresp queueHolger Schurig1-16/+7
This patch (co-developed by Dan Williams and Holger Schurig) uses a kfifo object for events and a swapping buffer scheme for the command response to preserve the zero-copy semantics of the CF driver and keep memory usage low. The main thread should only ever touch the buffer indexed by priv->resp_idx, while the interface code is free to write to the second buffer, then swap priv->resp_idx under the driver spinlock. The firmware specs only permit one in-flight command, so there will only ever be one command response to process at a time. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-09libertas: move association code from join.c into scan.cHolger Schurig1-1/+1
Besides code moving, I did the following changes: * made some functions static * removed some unneeded #include's * made patch checkpatch.pl clean Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-02libertas: convert sleep/wake config direct commandsHolger Schurig1-9/+8
Confirm sleep event: they come very regularly, eventually several times per second. Therefore we want to send the config command as fast as possible. The old code pre-set the command in priv->lbs_ps_confirm_sleep. However, the byte sequence to be sent to the hardware is the same for all interfaces. So this patch make this an extern structure, initialized at module load time. Config wake event: normal conversion to a direct command. However, I don't know how to trigger a "HOST AWAKE" event from the firmware, so this part is untested. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-02libertas: convert CMD_802_11_EEPROM_ACCESS to a direct commandHolger Schurig1-29/+0
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-02libertas: convert CMD_802_11_MAC_ADDRESS to a direct commandHolger Schurig1-17/+0
* directly call lbs_cmd_with_response() * only overwrite priv->current_addr once the firmware call succeeded Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-27libertas: reduce debug outputHolger Schurig1-2/+2
This patch tries to make dmesg logs between different runs easier to compare by * removing the jiffies (use CONFIG_PRINTK_TIME if you need timing) * remove the line numbers, they change with each applied patch It also changes the deprecated __FUNCTION__ to __func__ to make checkpatch.pl happy. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-27libertas: remove CMD_802_11_PWR_CFGHolger Schurig1-8/+0
This has nowhere been used. Note: in the firmware manual this was documented as CMD_802_11_PA_CFG. If we ever need it, we can/should re-implement it as a direct command. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: remove lots of unused stuffHolger Schurig1-25/+4
This removes many unused function parameters as well as some not-implemented functions, e.g. CMD_802_11_GET_STATS. The silly lbs_set_cmd_ctrl_node() function is now also gone. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: misc power saving adjustsHolger Schurig1-9/+9
* firmware for the CF card supports power saving * the driver currenly only accept "iwconfig ethX power on|off", so I fixed what the range wext ioctl reports. * initialize value/flags in lbs_get_power() * get rid of unused parameter psmode in lbs_ps_confirm_sleep() * some minor debug output tweaks Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: convert GET_LOG to a direct commandHolger Schurig1-18/+0
Now uses __lbs_cmd() to get the "log" (it's actually more a snapshot of various counters, not a sequential log). Besides the "mechanical" convertion the patch add the following logical changes: * Removes the priv->logmsg variable, it was only used in one place anyway, also don't blindly get the counters when associating. Getting the counters then the user asks via WEXT for them is good enought. * don't set wstats.discard.fragment with log.rxfrag, because the latter is a counter for successfully received packets, not for fragmented packets. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: convert CMD_MAC_CONTROL to a direct commandHolger Schurig1-1/+0
convert CMD_MAC_CONTROL to a direct command Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-18Merge branch 'master' of ↵David S. Miller1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/rt2x00/rt2x00dev.c net/8021q/vlan_dev.c
2008-03-11libertas: fix the 'compare command with itself' properlySebastian Siewior1-1/+1
|libertas: Invalid CMD_RESP 8012 to command 50! The special case got mixed up in 8a96df80b3. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-07libertas: convert 802_11_SCAN to a direct commandDavid Woodhouse1-4/+0
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-07libertas: convert KEY_MATERIAL to a direct commandDavid Woodhouse1-59/+0
The struct enc_key probably wants to die too, but that can come later. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-05Merge branch 'master' of ↵David S. Miller1-5/+3
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/mac80211/rc80211_pid_algo.c
2008-03-05libertas: compare the current command with responseSebastian Siewior1-3/+1
instead of with itself. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-05libertas: fix sanity check on sequence number in command responseDavid Woodhouse1-2/+2
Slightly more useful if we compare it against the sequence number of the command we have outstanding, rather than comparing the reply with itself. Doh. Pointed out by Sebastian Siewior Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29libertas: make association debug output nicerHolger Schurig1-1/+1
This also fixes a bug where should_deauth_infrastructure() always returned 0. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29libertas: trim overly long debug statementHolger Schurig1-2/+2
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: convert SUBSCRIBE_EVENT to a direct commandDavid Woodhouse1-22/+0
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: convert ENABLE_RSN to a direct commandDavid Woodhouse1-21/+0
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: convert SET_WEP to a direct commandDavid Woodhouse1-1/+0
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: convert SLEEP_PARAMS to a direct commandDavid Woodhouse1-26/+0
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: convert INACTIVITY_TIMEOUT to a direct commandDavid Woodhouse1-7/+0
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: convert RADIO_CONTROL to a direct commandDavid Woodhouse1-1/+0
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: discard DEFER responses to commands; let the timeout triggerDavid Woodhouse1-0/+10
When the firmware returns 0x0004, it wants us to try again later. We can achieve that simply by throwing out the response and letting the command timeout code kick in. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: use priv->upld_buf for command responsesDavid Woodhouse1-1/+1
If we don't scribble over the command we sent, then we can retry it when the firmware responds with 0x0004 (which means -EAGAIN). Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: reduce explicit references to priv->cur_cmd->cmdbufDavid Woodhouse1-4/+4
We have a local variable 'resp' which we use for this. So use it, instead of typing the whole thing. In preparation for actually using priv->upld_buf for the responses instead... Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: handle HOST_AWAKE event by sending WAKEUP_CONFIRM commandDavid Woodhouse1-1/+29
lbs_send_confirmwake() is a bit ugly but matches the way we confirm sleep. We'll deal with that whole thing later. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: fix buffer handling of PS_MODE commands and responsesDavid Woodhouse1-1/+1
Commit 5b8845345e7385d2eb37fac22ba9ab6905988be5 (or, in case the git workflow is broken and patches get recommitted, the commit entitled 'libertas: rename and re-type bufvirtualaddr to cmdbuf' by dcbw), introduced a number of bugs where we once had a pointer to a command _payload_, but now we use the pointer to the command header instead. The fix isn't wonderfully pretty for now, but it'll get better when we finish converting all commands so the structures include the header. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: handle command timeout in main thread instead of directly in timerDavid Woodhouse1-0/+6
And handle the case where it times out more than once, too, instead of locking up for ever. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: kill pdata_buf member of struct cmd_ctrl_nodeDavid Woodhouse1-13/+13
We can use the callback_arg for it; that's the way we're heading anyway... Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: introduce and use lbs_complete_command() for command completionDavid Woodhouse1-7/+3
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: slight cleanup of netif queue stop/wakeDavid Woodhouse1-6/+8
In particular, we shouldn't be waking the queues in lbs_host_to_card_done() any more. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: be more careful about command responses matching cur_cmdDavid Woodhouse1-14/+22
Especially in the light of OLPC trac #5461, in which the firmware starts sending us seemingly random command responses which bear little relation to the command we sent it. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: convert RF_CHANNEL to a direct commandDan Williams1-25/+0
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: convert DATA_RATE to a direct commandDan Williams1-23/+0
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: convert CMD_MESH_ACCESS to a direct commandDavid Woodhouse1-5/+0
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: rename and re-type bufvirtualaddr to cmdbufDan Williams1-7/+7
Make it a struct cmd_header, since that's what it is, and clean up the places that it's used. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: convert GET_HW_SPEC to a direct commandDan Williams1-67/+0
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: clean up direct command handlingDan Williams1-3/+4
Move direct command handling through __lbs_cmd() over to using the header as the first member of the command structure, and only define the __lbs_cmd() callback in one place rather than 3. Convert boot2 version command to new usage. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: add opaque extra argument to cmd callback functionDavid Woodhouse1-5/+6
This will be useful for letting callbacks do stuff like copying the response into a buffer provided by the caller of lbs_cmd() Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: kill struct lbs_adapterDavid Woodhouse1-178/+158
There seems to be no reason for a separate structure; move it all into struct lbs_private. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: kill adapter->nr_cmd_pendingDavid Woodhouse1-5/+0
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: endianness fixesHolger Schurig1-1/+1
Recently I found that that sparse by default doesn't endianness checks. So I changed my compilation habit to be make modules C=1 SUBDIRS=drivers/net/wireless/libertas CHECKFLAGS="-D__CHECK_ENDIAN__" so that I get the little-endian checks from sparse as well. That showed up a good bunch of problems. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29libertas: Switch to using a callback function pointer for commandsDavid Woodhouse1-15/+8
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-04 18:33:14 +0300