summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-prph.h
AgeCommit message (Collapse)AuthorFilesLines
2014-06-24iwlwifi: pcie: add firmware monitor capabilitiesEmmanuel Grumbach1-0/+6
This allows to use the firmware monitor. This capability uses a lot of contiguous memory (up to 64MB), so make its usage module parameter dependent. The driver will try to allocate as much contiguous memory as possible downgrading its requirements until the allocation succeeds. Dump this data into the fw-error dump file when an error happens. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-15iwlwifi: update nmi registerLiad Kaufman1-0/+3
In the 8000 HW family the register for forcing an NMI has changed, so this allows to still be able to force an NMI while taking into account the HW in order to write to the correct register. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: dump Rx FIFO when the firmware assertsEmmanuel Grumbach1-0/+8
The Rx FIFO includes valuable data - dump it when the FW asserts. Also - free the SRAM and Rx FIFO when we create the file, and don't collect new SRAM / Rx FIFO if the previous file hasn't been collected through debugfs yet. Also - add a comment to saying that the ASSERT output should not be modified since we have automatic scripts that monitor this output. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-09iwlwifi: pcie: enable LP XTAL to reduce power consumptionAlexander Bondar1-1/+22
1. Enable LP XTAL to avoid HW bug where device may consume much power if FW is not loaded after device reset. LP XTAL is disabled by default after device HW reset. Configure device's "persistence" mode to avoid resetting XTAL again when SHRD_HW_RST occurs in S3. 2. Add methods to access SHR (shared block memory space) directly from PCI bus w/o need to power up MAC HW. Shared internal registers (e.g. SHR_APMG_GP1, SHR_APMG_XTAL_CFG)can be accessed directly from PCI bus through SHR arbiter even when MAC HW is powered down. This is possible due to indirect read/write via HEEP_CTRL_WRD_PCIEX_CTRL (0xEC) and HEEP_CTRL_WRD_PCIEX_DATA (0xF4) registers. Use iwl_write32()/iwl_read32() family to access these registers. The MAC HW need not be powered up so no "grab inc access" is required. For example, to read from SHR_APMG_GP1 register (0x1DC), first, write to the control register: HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register) HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 2 (read access) second, read from the data register HEEP_CTRL_WRD_PCIEX_DATA[31:0]. To write the register, first, write to the data register HEEP_CTRL_WRD_PCIEX_DATA[31:0] and then: HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register) HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 3 (write access) Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-04iwlwifi: pcie: fix secure section / dual cpu firmware loadingEran Harary1-0/+39
Also handle the bypass mode in which the second CPU doesn't interfere. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-04iwlwifi: pcie: change CSR reset in family 8000Eran Harary1-0/+7
This register is not present in 8000 family devices. There is prph register instead. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Dor Shaish <dor.shaish@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-14iwlwifi: pcie: enable oscillator for L1 exitEmmanuel Grumbach1-0/+4
Enabling the oscillator consumes slightly more power (100uA) but allows to make sure that we exit from L1 on time. Not doing so might lead to a PCIe specification violation since we might wake up from L1 at the wrong time. This issue has been identified on 3160 and 7260 only. On older NICs L1 off is not enabled, on newer NICs (7265), the issue is fixed. When the bug occurs the user sees that the NIC has disappeared from the PCI bridge, any access to the device returns 0xff. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=64541 and has been extensively discussed here: http://markmail.org/thread/mfmpzqt3r333n4bo Cc: stable@vger.kernel.org [3.10+] Fixes: 99cd47142399 ("iwlwifi: add 7000 series device configuration") Reported-and-tested-by: wzyboy <wzyboy@wzyboy.org> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: Update Copyright to 2014Emmanuel Grumbach1-2/+2
Happy new year! Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-10iwlwifi: mvm: Add debugfs entry to generate NMI to NICAlexander Bondar1-0/+3
Writting to fw_nmi entry will set DEVICE_SET_NMI_REG (0x00a01c30) generating NMI that halts NIC CPU. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-02iwlwifi: pcie: clean RFKILL interrupt in AMPGEmmanuel Grumbach1-0/+2
Newer firmware don't clean the RFKILL interrupt in APMG, do it in driver instead. If we forget to do so, we can't send HCMD to firmware while the NIC is in RFKILL state. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-06Revert "iwlwifi: pcie: clear RFKILL interrupt in AMPG"Guy Cohen1-2/+0
This reverts commit a53ee0a308b16e392e0219c585b10f329345766b. This fix causes a worse HW Error when entering RF-Kill. Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Dor Shaish <dor.shaish@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-26iwlwifi: pcie: clear RFKILL interrupt in AMPGEmmanuel Grumbach1-0/+2
If we forget to do so, we can't send HCMD to firmware while the NIC is in RFKILL state. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-29iwlwifi: mvm: add thermal throttling and CT killEytan Lifshitz1-0/+12
In order to avoid NIC destruction due to high temperature, CT kill will power down the NIC. To avoid this, thermal throttling will decrease throughput to prevent the NIC from reaching the temperature at which CT kill is performed. Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: a few fixes in licenseEmmanuel Grumbach1-1/+1
7000.c was released as GPL only by mistake: it should be dual licensed - GPL / BSD. The file that contains the license in the kernel is COPYING and not LICENSE.GPL. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-31iwlwifi: add 7000 series device configurationJohannes Berg1-0/+3
Add configuration and detection code for the new 7000 series, with 7260 and 3160 devices. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-24iwlwifi: update copyrightJohannes Berg1-2/+2
Update Copyright notices to 2013. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16iwlwifi: wipe out the status of the SCD when we disable a queueEmmanuel Grumbach1-0/+3
When we disable a queue, we don't want the SCD to remember anything about this queue (what packet was transmitted but not acked, what packed was acked etc...). Wipe out all this data in its SRAM. Constify the arguments to iwl_write_targ_mem_dwords on the way. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Conflicts: MAINTAINERS drivers/net/wireless/iwlwifi/pcie/trans.c The iwlwifi conflict was resolved by keeping the code added in 'net' that turns off the buggy chip feature. The MAINTAINERS conflict was merely overlapping changes, one change updated all the wireless web site URLs and the other changed some GIT trees to be Johannes's instead of John's. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-08iwlwifi: disable the buggy chain extension feature in HWEmmanuel Grumbach1-0/+1
This feature has been reported to be buggy and enabled by default. We therefore need to disable it manually. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06iwlwifi: update mask value for SCD queue configEmmanuel Grumbach1-1/+1
Although we don't use bit 24, this bit is valid, but bit 23 is not. Update the mask accordingly. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-04-24iwlwifi: fix hardware queue programmingJohannes Berg1-3/+24
Newer devices have 20 (5000 series) or 30 (6000 series) hardware queues, rather than the 16 that 4965 had. This was added to the driver a long time ago, but improperly: the queue registers for the higher queues aren't just continuations of the registers for the first 16 queues, they are in other places. Therefore, the hardware would lock up when trying to activate queue 16 or above and the device would have to be restarted. Thanks goes to Emmanuel who identified this and told me how the queue programming should be done. Note that we don't use queues 20 and higher today and doing so needs more work than this. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-09iwlwifi: fix cmd_queue number mergeWey-Yi Guy1-4/+0
iwlwifi: move command queue number out of the iwl_shared struct move the cmd_queue out of iwl_shared struct, but for some reason the patch is half done and fail compile Here is the fix John, could you apply this patch to wireless-next to address the issue Thanks Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24iwlwifi: update CopyrightWey-Yi Guy1-2/+2
Update Copyright to 2012 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29iwlagn: cmd_queue moves to iwl_sharedEmmanuel Grumbach1-1/+1
Since it is used by all the layers, it needs to move to iwl_shared. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29iwlagn: hw_params moves to iwl_sharedEmmanuel Grumbach1-1/+1
Since it is used by all the layers, it needs to move to iwl_shared. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-16iwlagn: add tx start API to transport layerEmmanuel Grumbach1-41/+41
tx start will start the tx queues: basically configure the SCD Remove the IWLAGN prefix to SCD defines on the way. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.guy@intel.com>
2011-07-01iwlagn: scd memory boundaryWey-Yi Guy1-5/+14
Assign memory boundary for SCD context, tx status and translation table Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-08iwlagn: more cleanup to remove unused referenceWey-Yi Guy1-13/+3
More cleanup code, no functional changes Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-07iwlagn: change Copyright to 2011Wey-Yi Guy1-2/+2
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: remove more 3945/4965 related definesWey-Yi Guy1-327/+0
After driver split, remove unused #defines Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: clean up some 3945/4965 remnantsJohannes Berg1-11/+0
When the driver was split, a bunch of definitions for the 3945 and 4965 devices stayed around, but they're now useless so remove (some of) them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-14iwlwifi: do not reload fw if WiMAX own the RFWey-Yi Guy1-1/+1
For WiFi/WiMAX combo devices, if WiMAX own the RF, WiFi driver try to access RF and fail. This is the W/A to To avoid WiFi keep reloading firmware and try to access RF again. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: prepare for PAN queue/fifo assignmentJohannes Berg1-4/+5
PAN ucode will require a different queue assignment, in particular queue 9 instead of 4 should be used for commands. This is required because the ucode will stop/start queues 4 and 8 depending on the PAN state, since queue 8 will be used for PAN multicast (after DTIM). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-04-17iwlwifi: more code clean up for agn devicesWey-Yi Guy1-40/+40
Since multiple new devices having similar uCode architecture and use same registers address, remove more reference to 5000 series to eliminate the confusion. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-03-10iwlwifi: clean up queue/fifo handlingJohannes Berg1-7/+7
4965 hardware has 7 queues reserved and the remaining ones used for aggregation, 5000 and higher need to have 10 reserved. This is not very clear in the code right now, unfortunately. Introduce a new IWL_TX_FIFO_UNUSED constant and make the queue/FIFO mapping arrays able to hold that value, and change the setup code to reserve all queues in the arrays (the queue number is the index) and use the new unused constant to not map those queues to any FIFO. Additionally, clear up the AC/queue mapping code to be more understandable. The mapping is the identity mapping right now, but with the mapping function I think it's easier to understand what happens there. Finally, HCCA isn't implemented at all and I think newer microcode removed it, so let's remove all mention of it in the code, some comments remain for 4965. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-20iwlwifi: update copyright year to 2010Reinette Chatre1-2/+2
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11iwlwifi: add FIFO usage for 5000Johannes Berg1-3/+16
This is part of the code, but the comment doesn't have it, add pointers to the code and the FIFO usage for 5000 and up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlagn: modify digital SVR for 1000Wey-Yi Guy1-1/+4
On 1000, there are two Switching Voltage Regulators (SVR). The first one apply digital voltage level (1.32V) for PCIe block and core. We need to use this regulator to solve a stability issue related to noisy DC2DC line in the silicon. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwlwifi: update copyright year to 2009Reinette Chatre1-2/+2
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12iwlwifi: change email contact informationWinkler, Tomas1-1/+1
This patch replaces personal emails with hopefully always valid Intel Linux Wireless, which will be routed to a current maintainer Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-01iwlwifi: run through spell checkerTomas Winkler1-3/+3
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04iwlwifi: HW bug fixesTomas Winkler1-5/+7
This patch adds few HW bug fixes. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: move aggregation code to iwl-tx.cTomas Winkler1-3/+3
This patch moves aggregation action code to iwl-tx.c in iwlcore. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: move txq_ctx_stop into iwl-tx.cTomas Winkler1-5/+0
This patch moves txq_ctx_stop into iwl-tx.c iwlcore module. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-22iwlwifi: add ucode init flow handling for iwl5000Ron Rindjunsky1-0/+28
This patch adds all the handlers and functions needed for ucode initialization flow. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-07iwlwifi: clean up register names and definesEmmanuel Grumbach1-32/+278
This patch cleans up and renames some of the SCD registers. It move SCD definitions into iwl-prhp.h file Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-09iwlwifi: hw names cleanupTomas Winkler1-35/+39
This patch make some cleanup in HW names Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-14iwlwifi: update copyright yearReinette Chatre1-2/+2
Also fix a copy and paste error in header of iwl-core.c. This file is not dual licensed. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29iwlwifi: document 4965 Tx schedulerBen Cahill1-4/+10
Document 4965 Tx scheduler Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-29iwlwifi: add 5965 SCD registers to iwl-prph.hEmmanuel Grumbach1-1/+11
This patch adds SCD registers for 5965 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>