summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
AgeCommit message (Collapse)AuthorFilesLines
2012-06-06iwlwifi: move DVM code into subdirectoryJohannes Berg1-1386/+0
Since we're working on another mode/driver inside iwlwifi, move the current one into a subdirectory to more cleanly separate the code. While at it, rename all the files. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: handle race condition in ROC flowIlan Peer1-0/+18
When a remain on channel request from mac80211 is followed by a request to tx a mgmt frame offchannel, it is possible that the remain on channel expires before the device reported the tx status for the frame. This causes a race condition in mac80211. To fix this, delay the ROC notification to mac80211 until the device reported the Tx status for all frames in the aux queue. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-05-16iwlwifi: don't disable AGG queues that are not enabledEmmanuel Grumbach1-3/+9
If the BA session is torn down before we had a chance to start it we shouldn't disable the AGG tx queues that weren't enabled. This can happen in two cases: 1) We get a delBA before we drained our Tx queues in agg start flow 2) We didn't get the (successfull) addBA response on time Reported-by: Daniel Chyan <dchyan@princeton.edu> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16iwlwifi: don't flood logs when HT debug flag is setEmmanuel Grumbach1-4/+3
We have TX_REPLY for that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-24iwlwifi: use new mac80211 queue schemeJohannes Berg1-4/+9
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-24iwlwifi: remove TX/RX frame statisticsJohannes Berg1-3/+0
Keeping statistics per frame type really isn't very useful, and needs a huge amount of code so remove it. Since that is the only thing in iwl-core.{c,h} now, those files can be killed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-24iwlwifi: remove traffic logJohannes Berg1-1/+0
This is superseded by tracing and no longer needed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-18iwlwifi: split between AGG_ON and AGG_STARTINGEmmanuel Grumbach1-3/+17
This allows not to notify the transport about aggregation stopped while aggregation haven't been started. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-18iwlwifi: op_mode holds its pointer to the configEmmanuel Grumbach1-8/+8
Instead of using the shared area that we be killed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-18iwlwifi: op_mode holds its pointer to the transportEmmanuel Grumbach1-5/+5
Instead of using the shared area that we be killed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-12iwlwifi: move hw_params into privJohannes Berg1-3/+3
The hw_params are mostly values that are derived from the actual hardware config. As such, while it is possible that MVM will require similar ones, it makes more sense -- at least for now -- to put them into the DVM struct. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: remove antenna_sel_tx TX info fieldJohannes Berg1-2/+2
This field is never set to anything non-zero in mac80211, so we should be able to remove it. Unfortunately though, the iwlwifi and iwlegacy drivers use it for their internal TX status processing (which shouldn't be using the rate control API to start with), so add a new field "status.antenna" for them, at least for now. In the future, I plan to use the new field to hold the hardware queue, while the SKB's queue mapping holds the AC. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10iwlwifi: move queue mapping out of transportJohannes Berg1-21/+111
The queue mapping is not only dynamic, it is also dependent on the uCode, as we can already see today with the dual-mode and non-dual-mode being different. Move the queue mapping out of the transport layer and let the higher layer manage it. Part of the transport configuration is how to set up the queues. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10iwlwifi: add trailing newline to various messagesJohannes Berg1-4/+4
A whole bunch of messages, even some recent ones, didn't include a trailing newline so add it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-09iwlwifi: fix the delta for remove max_txq_num patchWey-Yi Guy1-1/+1
BIg portion of "iwlwifi: remove max_txq_num from hw_params" was missing during merge, here is the fix for it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-08iwlwifi: more status bit factoringDon Fry1-2/+2
Continue splitting the status bits between transport and op_mode. All but a few are separated. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-08iwlwifi: log stop / wake queuesEmmanuel Grumbach1-0/+2
There were a few missing occurences when we get PASSIVE_NO_RX notification. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-08iwlwifi: make tx_cmd_pool kmem cache globalStanislaw Gruszka1-4/+4
Otherwise we are not able to run more than one device per driver: [ 24.743045] kmem_cache_create: duplicate cache iwl_dev_cmd [ 24.743051] Pid: 3165, comm: NetworkManager Not tainted 3.3.0-rc2-wl+ #5 [ 24.743054] Call Trace: [ 24.743066] [<ffffffff811717d5>] kmem_cache_create+0x655/0x700 [ 24.743101] [<ffffffffa03b9f8b>] iwl_alive_notify+0x1cb/0x1f0 [iwlwifi] [ 24.743111] [<ffffffffa03ba442>] iwl_load_ucode_wait_alive+0x1b2/0x220 [iwlwifi] [ 24.743142] [<ffffffffa03ba893>] iwl_run_init_ucode+0x73/0x100 [iwlwifi] [ 24.743152] [<ffffffffa03b8fa1>] __iwl_up+0x81/0x220 [iwlwifi] [ 24.743161] [<ffffffffa03b91c0>] iwlagn_mac_start+0x80/0x190 [iwlwifi] [ 24.743188] [<ffffffffa03307b3>] ieee80211_do_open+0x293/0x770 [mac80211] Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-08iwlwifi: redesign PASSIVE_NO_RX workaroundJohannes Berg1-6/+6
The PASSIVE_NO_RX workaround currently crosses through the op_mode and transport layers, which is a bit odd. This also isn't necessary, if the transport simply reports when queues are full (or no longer full) the op_mode can keep track of this state, and report to mac80211 only what *it* thinks is appropriate. What is appropriate can then be based on whether queues should be stopped to wait for RX or not. This significantly simplifies the transport API, it no longer needs to expose anything to stop a queue, nor to wake "any" queue, this can all be handled in the upper layer completely. Also simplify the handling to not be dependent on the context, that makes little sense as the queues are shared and both contexts have to be on the same channel anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-08iwlwifi: move iwl_sta_id_or_broadcast to userJohannes Berg1-1/+30
There's only one user, so the function can be moved into the correct file. It also loses an argument along the way. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: move packet to transportJohannes Berg1-2/+2
The base packet structure will (hopefully) be the same for all transports, but what is in it differs. Remove the union of all the possible contents and move the packet itself into the transport header file. This requires changing all users of the union to just use pkt->data. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: put use_rts_for_aggregation into hw_paramsJohannes Berg1-2/+1
The hardware config ht_params shouldn't be modified, so copy the use_rts_for_aggregation parameter into hw_params and use/modify it there. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: don't pass iwl_rx_mem_buffer to upper layersJohannes Berg1-2/+2
struct iwl_rx_mem_buffer implementation details (DMA address, list pointers) that the upper layers don't need. Introduce iwl_rx_cmd_buffer that is passed upstream and only contains the needed data (the page). Additionally, access this data only via accessor functions, allowing us to change the implementation in the future. These accessors are rxb_addr() (as before) and rxb_steal_page() to take ownership of the data. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: use ieee80211_tx_statusJohannes Berg1-10/+18
We currently use the _irqsafe version, but that isn't recommended together with ieee80211_rx() as it can cause races. If the device reports a TX-status and RX in that order then with the current combination mac80211 might process them in the other order, which can cause issues with powersaving clients. Use ieee80211_tx_status() to avoid this race. Since we don't want to call it with locks held, process the frame queues later -- this is fine as they are on the stack. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: move wowlan bool into privJohannes Berg1-1/+1
With the new WoWLAN flow into the transport there no longer is a need for this to be shared, so move it into priv. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: remove shared lockJohannes Berg1-9/+0
Some data doesn't need protection, some of the lock places are simply useless, and some data can be protected with the mutex instead. Thus the shared lock can be removed by making those changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: make sta lock private & BH lockJohannes Berg1-26/+20
Now that the transport has its own locking, there's no need to have the sta_lock in the shared data. Also, it can be a BH lock as it's not used from IRQ handlers. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: reduce sta_lock hold time in TXJohannes Berg1-4/+4
When we TX, we hold the sta_lock for a long time, a lot of which isn't needed. Reduce the time we hold the lock. Note that this doesn't really change anything as the code is already under the other spinlock, but it makes the code easier to read. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: remove an unused argumentJohannes Berg1-5/+4
The station ID argument to the function iwlagn_tx_cmd_build_hwcrypto isn't used so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29mac80211: handle non-bufferable MMPDUs correctlyJohannes Berg1-1/+5
This renames the IEEE80211_TX_CTL_POLL_RESPONSE TX flag to IEEE80211_TX_CTL_NO_PS_BUFFER and also uses it for non-bufferable MMPDUs (all MMPDUs but deauth, disassoc and action frames.) Previously, mac80211 would let the MMPDU through but not set the flag so drivers supporting some hardware aids for avoiding the PS races would then reject the frame. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-17iwlwifi: move workqueue to privJohannes Berg1-1/+1
In order to separate the different parts of the driver better, we are reducing the shared data. This moves the workqueue to "priv", and removes it from the transport. To do this, simply use schedule_work() in the transport. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-16Merge branch 'master' of ↵John W. Linville1-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/mac80211/debugfs_sta.c net/mac80211/sta_info.h
2012-02-02iwlwifi: don't mess up QoS counters with non-QoS framesEmmanuel Grumbach1-3/+9
In my AMPDU rework, I rely on the sequence numbers of frames. But I didn't check that the frame has a valid tid before updating the tracking counters. As a result, the Tx queues were stalled. People who hit this bug saw that we simply didn't let any data out. This bug was introduced in 3.3. This patch fixes that and checks that the frame is a QoS frame before looking at its tid and changing the counters. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-02iwlwifi: make "Tx aggregation enabled on ra =" be at DEBUG levelJohn W. Linville1-1/+1
Average users either don't care or they think that message indicates a problem... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24iwlwifi: update CopyrightWey-Yi Guy1-1/+1
Update Copyright to 2012 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-16iwlwifi: don't accept Tx packets when draining HW queuesEmmanuel Grumbach1-0/+8
If the agg SM is in IWL_EMPTYING_HW_QUEUE_ADDBA or in IWL_EMPTYING_HW_QUEUE_DELBA, we are not supposed to get Tx packets from mac80211. mac80211 is supposed to buffer these packets for us. A few issues have been identified in this mechanism, not all of them were fixed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-16iwlwifi: kill iwl_{start,stop}_tx_ba_trans_readyEmmanuel Grumbach1-11/+11
Since my latest patches, the upper layer reports to mac80211 that the driver is ready to continue the start / stop BA flow as opposed to the transport layer. Hence, iwl_{start,stop}_tx_ba_trans_ready are not needed any more. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-16iwlwifi: tid_data moves to iwl_privEmmanuel Grumbach1-18/+16
The transport doesn't need to access it any more. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2011-12-16iwlwifi: transport layer shouldn't access the AGG SMEmmanuel Grumbach1-0/+11
This is another step towards the move of tid_data from the shared area. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-16iwlwifi: tid_data logic move to upper layer - seq_numberEmmanuel Grumbach1-3/+27
The tid_data is not related to the transport layer, so move the logic that depends on it to the upper layer. This patch deals with the seq_number. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-16iwlwifi: tid_data logic move to upper layer - txqidEmmanuel Grumbach1-22/+13
The tid_data is not related to the transport layer, so move the logic that depends on it to the upper layer. This patch deals with the mapping of RA / TID to HW queues in AGG. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-16iwlwifi: tid_data logic move to upper layer - check_emptyEmmanuel Grumbach1-0/+39
The tid_data is not related to the transport layer, so move the logic that depends on it to the upper layer. This patch deals with the code that checks if there are still pending packets for an RA / TID. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-16iwlwifi: tid_data logic move to upper layer - tx AGG setupEmmanuel Grumbach1-0/+61
The tid_data is not related to the transport layer, so move the logic that depends on it to the upper layer. This patch deals with tx AGG setup. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-16iwlwifi: tid_data logic move to upper layer - tx AGG allocEmmanuel Grumbach1-2/+30
The tid_data is not related to the transport layer, so move the logic that depends on it to the upper layer. This patch deals with tx AGG alloc. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-16iwlwifi: tid_data logic move to upper layer - tx AGG stopEmmanuel Grumbach1-17/+71
The tid_data is not related to the transport layer, so move the logic that depends on it to the upper layer. This patch deals with tx AGG stop. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-16iwlwifi: don't count the tfds in HW queue any moreEmmanuel Grumbach1-2/+26
Since packets sent to an RA / TID in AGG are sent from a separate HW Tx queue, we may get into a race: the regular queue isn't empty while we already begin to send packets from the AGG queue. This would result in sending packets out of order. In order to cope with this, mac80211 waits until the driver reports that the legacy queue is drained before it can send packets to the AGG queue. During that time, mac80211 buffers packets for the driver. These packets will be sent in order after the driver reports it is ready. The way this was implemented in the driver is as follows: We held a counter that monitors the number of packets for an RA / TID in the HW queues. When this counter reached 0, we knew that the HW queues were drained and we reported to mac80211 that were ready to proceed. This patch changes the implementation described above. We now remember what is the wifi sequence number of the first packet that will be sent in the AGG queue (lets' call it ssn). When we reclaim the packet before ssn, we know that the queue is drained, and we are ready to proceed. This will allow us to move this logic in the upper layer and eventually remove the tid_data from the shared area. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-16iwlwifi: fix endianity issue in debug printsEmmanuel Grumbach1-1/+1
ba_resp->seq_ctl is __le16, need to translate to cpu endianity. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-16iwlwifi: move iwl_cfg from iwl_priv to iwl_sharedDon Fry1-6/+6
Move the configuration pointer from the upper level iwl_priv to the lower level iwl_shared structure, with associated code fixes. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-14Merge branch 'master' of ↵John W. Linville1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c
2011-12-12iwlwifi: do not set the sequence control bit is not neededWey-Yi Guy1-1/+4
Check the IEEE80211_TX_CTL_ASSIGN_SEQ flag from mac80211, then decide how to set the TX_CMD_FLG_SEQ_CTL_MSK bit. Setting the wrong bit in BAR frame whill make the firmware to increment the sequence number which is incorrect and cause unknown behavior. CC: stable@vger.kernel.org #3.0+ Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-17 00:38:49 +0300