summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-7000.c
AgeCommit message (Collapse)AuthorFilesLines
2014-05-06iwlwifi: mvm: fix bug with OTP memory sizeEran Harary1-1/+1
OTP size changed in family 7000 and in family 8000. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06Merge remote-tracking branch 'iwlwifi-fixes/master' into iwlwifi-nextEmmanuel Grumbach1-0/+1
2014-04-13iwlwifi: 7000: bump firmware API version to 9Emmanuel Grumbach1-4/+4
Also warn if an older firmware is loaded. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: add MODULE_FIRMWARE for 7265Emmanuel Grumbach1-0/+1
It was missing. Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: deprecate -7 firmwareEmmanuel Grumbach1-2/+2
This firmware is not supported any more. A few code paths specific to old firmware can be removed. We can now assume that a few TLV flags are always set since we won't load firmware that didn't support the corresponding features. This will be done in a separate patch. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: 7000: bump API to 9Emmanuel Grumbach1-2/+2
This will allow to load the new firmware. Cc: <stable@vger.kernel.org> [3.14] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-06iwlwifi: pcie: don't leave the new NICs awake for commandsEmmanuel Grumbach1-0/+1
A hardware bug had been discovered on 7260 / 3160 and 7265 and the workaround for this bug is to force the NIC to stay awake as long as we have host commands in flight. This workaround has been introduced for all NICs in a previous patch: b9439491055a ("iwlwifi: pcie: keep the NIC awake when commands are in flight") In newer NICs, this bug is solved, so we can let the NIC go to sleep even when we send commands. The hardware will wake up when we increment the scheduler write pointer. Make the workaround conditional to only use it on affected hardware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-09iwlwifi: pcie: enable LP XTAL to reduce power consumptionAlexander Bondar1-0/+4
1. Enable LP XTAL to avoid HW bug where device may consume much power if FW is not loaded after device reset. LP XTAL is disabled by default after device HW reset. Configure device's "persistence" mode to avoid resetting XTAL again when SHRD_HW_RST occurs in S3. 2. Add methods to access SHR (shared block memory space) directly from PCI bus w/o need to power up MAC HW. Shared internal registers (e.g. SHR_APMG_GP1, SHR_APMG_XTAL_CFG)can be accessed directly from PCI bus through SHR arbiter even when MAC HW is powered down. This is possible due to indirect read/write via HEEP_CTRL_WRD_PCIEX_CTRL (0xEC) and HEEP_CTRL_WRD_PCIEX_DATA (0xF4) registers. Use iwl_write32()/iwl_read32() family to access these registers. The MAC HW need not be powered up so no "grab inc access" is required. For example, to read from SHR_APMG_GP1 register (0x1DC), first, write to the control register: HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register) HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 2 (read access) second, read from the data register HEEP_CTRL_WRD_PCIEX_DATA[31:0]. To write the register, first, write to the data register HEEP_CTRL_WRD_PCIEX_DATA[31:0] and then: HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register) HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 3 (write access) Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-04iwlwifi: 7265: add power limit/tx backoff translation tableIdo Yariv1-0/+14
Signed-off-by: Ido Yariv <idox.yariv@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-04iwlwifi: 7000: warn about old firmwareEmmanuel Grumbach1-2/+2
iwlwifi-7260-8.ucode has been release. Warn if it is not on the file system. iwlwifi-7260-7.ucode is still supported for another kernel version. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-04iwlwifi: mvm: support NVM sections for family 8000Eran Harary1-1/+4
The identification of the hardware section in the NVM of new devices has been changed, hence the need to add it to iwl_cfg and adapt the code that uses this value accordingly. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: Update Copyright to 2014Emmanuel Grumbach1-2/+2
Happy new year! Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-18iwlwifi: mvm: rs: fix RTS protection being set indefinitelyEyal Shapira1-1/+0
RTS protection was turned on once aggregation was enabled but it was never turned off. Remove turning on RTS protection in the LQ command completely as TX_CMD_FLG_PROT_REQUIRE gets set in iwl_mvm_set_tx_cmd for every Tx which is part of an aggregation. This would already cause RTS protection to be used during aggregations. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-17iwlwifi: publish STBC support in HTEyal Shapira1-0/+1
Not all chips support STBC so allow this to be another config parameter per chip type. If STBC is supported then publish it in the HT caps. Since 7260/7265/3160 chips support it - set the stbc support bit. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-11-26iwlwifi: bump required firmware API version for 3160/7260Emmanuel Grumbach1-2/+2
A new firmware is coming out soon with new APIs. To make sure that this new firmware won't be loaded on old driver that don't support it, it's API version has been updated to 8. In order to be able to load it, bump the API version to 8. API version 7 is still supported and will be for another year or so. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-11-26iwlwifi: add new HW - 7265 seriesOren Givon1-0/+18
Add new HW IDs and configurations for 7265 series. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-11-26iwlwifi: pcie: fix interrupt coalescing for 7260 / 3160Emmanuel Grumbach1-0/+7
We changed the timeout for the interrupt coealescing for calibration, but that wasn't effective since we changed that value back before loading the firmware. Since calibrations are notification from firmware and not Rx packets, this doesn't change anyway - the firmware will fire an interrupt straight away regardless of the interrupt coalescing value. Also, a HW issue has been discovered in 7000 devices series. The work around is to disable the new interrupt coalescing timeout feature - do this by setting bit 31 in CSR_INT_COALESCING. This has been fixed in 7265 which means that we can't rely on the device family and must have a hint in the iwl_cfg structure. Cc: stable@vger.kernel.org [3.10+] Fixes: 99cd47142399 ("iwlwifi: add 7000 series device configuration") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-11iwlwifi: Support 7265 devicesEran Harary1-0/+14
7265 is a very similar device to 7260, so just add the definitions based on 7260 for it. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-31iwlwifi: mvm: add high temperature SKU thermal throttling parametersEytan Lifshitz1-0/+10
When the NIC is expected to operate in high temperature, it is advisable to put more aggresive thermal throttling parameters, in order to prevent CT-kill. Signed-off-by: eytan lifshitz <eytan.lifshitz@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16iwlwifi: pcie: don't disable L1 for newest NICsEmmanuel Grumbach1-0/+1
In newest NICs (7000 family and up), L1 is supported, so avoid to disable it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-06-17iwlwifi: bump required firmware API version for 3160/7260Johannes Berg1-6/+6
As the firmware API has changed significantly and we don't have support code for the old APIs, bump the version to be able to release the version 7 API firmware. Unfortunately this means that the driver in 3.9 and 3.10 can't work, but that's still better than crashing the device/driver there. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-27iwlwifi: move some configuration parameters into DVMJohannes Berg1-8/+1
There are a number of parameters that aren't really hardware specific but rather define how the DVM firmware is used. Move these into the DVM configuration. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-13iwlwifi: add new 7260 and 3160 series device IDsOren Givon1-3/+39
Add new device IDs and configurations to support all the devices. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-13iwlwifi: enable shadow registers for 7000Emmanuel Grumbach1-1/+1
This will reduce CPU utilization. Instead of waking up the NIC for each Tx manually, the CPU can write to a register that will wake up the NIC automatically. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: make device configuration bus agnosticEmmanuel Grumbach1-0/+146
Newer devices can work on different buses. This means that their configuration can be shared between different buses. Hence the configuration structures should exported to all the buses and not only to PCIE. Change this. Note that this requires all the fields to be the same amongst the buses. If differences will appear, we can always define a part that is bus dependent. Today, this is not needed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>