summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel
AgeCommit message (Collapse)AuthorFilesLines
2018-09-28iwlwifi: mvm: set wep key for all stations in soft ap modeAvraham Stern3-8/+43
When operating as a soft ap with wep security, the key was not configured to the fw for the stations, based on the fact that the key will be specified in the tx command. However, in the new tx api the tx command does not include the key, which resulted in all data frames going out un-encrypted. Fix it by configuring the key for all the stations as they are added. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: use correct FIFO lengthSara Sharon2-15/+36
Current FIFO size calculation is wrong for two reasons: - We access lmac 0 by default - We don't take 11ax into consideration. Fix both. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: set RB size according to user settingsShaul Triebitz2-7/+46
RB size can be configured by user to be greater than 4K. That's needed for monitor to capture big AMSDUs. The firmware now enables different RB sizes configuration via context info. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: do not override amsdu size user settingsShaul Triebitz1-8/+12
Since AMSDUs are not de-aggregated by HW in monitor mode, we still need the option for setting large RBs (up to 12K). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: fit reclaim msg to MAX_MSG_LENGolan Ben Ami1-1/+1
Today, the length of a debug message in iwl_trans_pcie_reclaim may pass the MAX_MSG_LEN, which is 110. An example for this kind of message is: 'iwl_trans_pcie_reclaim: Read index for DMA queue txq id (2), last_to_free 65535 is out of range [0-65536] 2 2.' Cut the message a bit so it will fit the allowed MAX_MSG_LEN. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: Fail fast if HW is inaccessible at probeRajat Jain1-0/+6
If the HW is not responding at probe time, fail immediately complaining about it. Without this, we see that the kernel spends > 100ms trying to load firmware (even gives an incorrect impression that it actually loaded a firmware) and do unnecesary processing before concluding that the device is not accessible: INFO kernel: [ 34.092678] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002) WARNING kernel: [ 34.093560] iwlwifi 0000:01:00.0: Direct firmware load for iwl-dbg-cfg.ini failed with error -2 INFO kernel: [ 34.111523] iwlwifi 0000:01:00.0: loaded firmware version 17.318154.0 op_mode iwlmvm INFO kernel: [ 34.173250] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0xFFFFFFFF ERR kernel: [ 34.198023] iwlwifi 0000:01:00.0: iwlwifi transaction failed, dumping registers ERR kernel: [ 34.198044] iwlwifi 0000:01:00.0: iwlwifi device config registers: Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: tx: pull tracing out of iwl_fill_data_tbs()Johannes Berg1-20/+21
This will allow us to reuse the function later for adding fraglist SKBs to the TFD. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: tx: unify TFD unmappingJohannes Berg1-21/+7
When anything fails, we unmap the whole TFD in three different places scattered throughout the code. Unify this to a single place. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: gen2: build A-MSDU only for GSOJohannes Berg1-1/+6
If the incoming frame should be an A-MSDU, it may already be one, for example in the case of NAN multicast being encapsulated in an A-MSDU. Thus, use the GSO algorithm to build A-MSDU only if the skb actually contains GSO data. Fixes: 6ffe5de35b05 ("iwlwifi: pcie: add AMSDU to gen2") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: gen2: pull adding frags to helper routineJohannes Berg1-19/+32
Move the skb fragment loop into a helper routine to be able to reuse it later. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: api: annotate compressed BA notif array sizesJohannes Berg1-3/+3
Annotate the compressed BA notification array sizes and make both of them 0-length since the length of 1 is just confusing - it may be different than that and the offset to the second one needs to be calculated in the C code anyhow. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: Support TKIP on gen2 data pathDavid Spinadel2-3/+17
Make the adjustments for gen2 TX and RX of TKIP packets. Strip MIC on RX. Don't add IV space and keep the MIC space zeroed on TX. Devices that support gen2 data path support TKIP only in station mode. In all other modes, fall back to SW encryption. Do this early in the set_key() callback so that the key flags would not be incorrectly set. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: read correct prph address for newer devicesSara Sharon1-2/+14
For newer devices we have higher range of periphery addresses. Currently it is masked out, so we end up reading another address. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: enable sending HE_AIR_SNIFFER command via debugfsShaul Triebitz3-0/+51
In order to receive TB (Trigger Based) PPDU in monitor mode, the Driver must send the HE_AIR_SNIFFER_CONFIG_CMD host command. Enable that via debugfs. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: cleanup dead code on resume flow for non unified image.Dreyfuss, Haim1-15/+6
CDB support has nothing to do with non unified image. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: fix non_shared_ant for 22000 devicesErel Geron1-1/+1
The non-shared antenna was wrong for 22000 device series. Fix it to ANT_B for correct antenna preference by coex in MVM driver. Fixes: e34d975e40ff ("iwlwifi: Add a000 HW family support") Signed-off-by: Erel Geron <erelx.geron@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: dbg: don't crash if the firmware crashes in the middle of a debug dumpEmmanuel Grumbach1-1/+1
We can dump data from the firmware either when it crashes, or when the firmware is alive. Not all the data is available if the firmware is running (like the Tx / Rx FIFOs which are available only when the firmware is halted), so we first check that the firmware is alive to compute the required size for the dump and then fill the buffer with the data. When we allocate the buffer, we test the STATUS_FW_ERROR bit to check if the firmware is alive or not. This bit can be changed during the course of the dump since it is modified in the interrupt handler. We hit a case where we allocate the buffer while the firmware is sill working, and while we start to fill the buffer, the firmware crashes. Then we test STATUS_FW_ERROR again and decide to fill the buffer with data like the FIFOs even if no room was allocated for this data in the buffer. This means that we overflow the buffer that was allocated leading to memory corruption. To fix this, test the STATUS_FW_ERROR bit only once and rely on local variables to check if we should dump fifos or other firmware components. Fixes: 04fd2c28226f ("iwlwifi: mvm: add rxf and txf to dump data") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: remove ucode error tracepointJohannes Berg4-59/+2
Alexei's patch, assumed that all versions of "struct iwl_error_event_table" are the same, but there are really different versions in different files. Rather than trying to fix this, or splitting the tracepoint, or anything of the sort, just remove it entirely - turns out that nobody really uses it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: report RU offset is knownJohannes Berg1-1/+2
We already report the RU offset, so we'd better also report that we know the value. Fixes: e5721e3f770f ("iwlwifi: mvm: add radiotap data for HE") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: iwlmvm: fix typo when checking for TX BeamformingShaul Triebitz1-1/+1
Check the actual bit (mask) in Rx notification rate_n_flags. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: debug flow cleanupShahar S Matityahu2-128/+151
Cleanup of the debug flow by moving several flows to separate functions to increase readability. Three functions were created: 1. iwl_fw_get_prph_len - returns the size needed for periphery dump. 2. iwl_fw_dump_mem for - executes the memory dumping flow. 3. iwl_trans_get_fw_monitor_len - returns the size needed for monitor dump. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: RX API: remove unnecessary anonymous structJohannes Berg1-15/+13
There's no value in having an anonymous struct for holding a few fields, remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: fw: stop and start debugging using host commandSara Sharon6-9/+79
In new devices, access to periphery is forbidden. Send instead host command to start and stop debugging. Memory allocation is written in context info, but in case we need to update it there is a dedicated command. Add definitions, currently unused, of the new command. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: fw: add a restart FW debug functionSara Sharon5-35/+50
Move the restart FW debug code to a function. This avoids code duplication and lays the infra to support the new start and stop host commands in some future devices. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: fix a comment about the SP lengthEmmanuel Grumbach1-1/+3
The SP length in the ADD_STA command is an actual number of frames, and not the SP len as it appears in the WME IE. Fix that comment. The actual code is fine. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-27iwlwifi: 1000: set the TFD queue sizePavel Machek1-0/+1
.max_tfd_queue_size was ommited for 1000 card serries leading to oops in swiotlb. Fixes: 7b3e42ea2ead ("iwlwifi: support multiple tfd queue max sizes for different devices") Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-05wireless: align to draft 11ax D3.0Shaul Triebitz2-17/+38
Align to new 11ax draft D3.0. Change/add new MAC and PHY capabilities and update drivers' 11ax capabilities and mac80211's debugfs accordingly. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-04Merge tag 'mac80211-for-davem-2018-09-03' of ↵David S. Miller1-45/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Here are quite a large number of fixes, notably: * various A-MSDU building fixes (currently only affects mt76) * syzkaller & spectre fixes in hwsim * TXQ vs. teardown fix that was causing crashes * embed WMM info in reg rule, bad code here had been causing crashes * one compilation issue with fix from Arnd (rfkill-gpio includes) * fixes for a race and bad data during/after channel switch * nl80211: a validation fix, attribute type & unit fixes along with other small fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31iwlwifi: fix devices with PCI Device ID 0x34F0 and 11ac RF modulesLuca Coelho3-32/+97
The devices with PCI device ID 0x34F0 are part of the SoC and can be combined with some different external RF modules. The configuration for these devices should reflect that, but are currently mixed up. To avoid confusion with discrete devices, add part of the firmware to be used and the official name of the device to the cfg structs. This is least reorganization possible (without messing things even more) that could be done as a bugfix for this SoC. Further reorganization of this code will be done separately. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31Revert "iwlwifi: allow memory debug TLV to specify the memory type"Johannes Berg3-73/+12
This reverts the addition of memory type in the memory debug TLV as the firmware never ended up implementing it, and now the PRPH dump is added as a different TLV. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: activate fragmented EBS in case of fragmented scanAyala Beker2-1/+12
In case of fragmented scan on the HB channels, configure EBS to be fragmented as well. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: refactor txq_alloc for supporting more command typeGolan Ben Ami4-40/+82
Support more txq_alloc command types by moving the command declaration to the gen specific area. While at it, move some of the code segments to a common place for re-use. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: decode HE TB PPDU dataJohannes Berg2-25/+34
Decode the HE TB PPDU data that we get in sniffer mode and use it to populate the HE radiotap information. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: rs-fw: support dcmNaftali Goldstein2-0/+18
Add flags to the tlc_cfg_cmd for signaling peer support for receiving Dual Carrier Modulation at BPSK (MCS 0), and set them according to peer capabilities. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: rs-fw: enable STBC in he correctlyNaftali Goldstein2-7/+23
In the HE phy capabilities IE there are 2 bits to signal support for STBC in bandwidths of 80Mhz or less, and of 160Mhz. Use these bits to determine STBC support if this IE exists. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: avoid code duplication in stopping fw debug data recordingShahar S Matityahu5-18/+11
Make all FW debug data stop recording flows to use iwl_fw_dbg_stop_recording function instead of writing to FW registers directly. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: change monitor DMA to be coherentShahar S Matityahu2-45/+21
Allow access to the memory by the host and the device simultaneously. This will be needed in some future patches. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: always init rs_fw with 20MHz bandwidth ratesNaftali Goldstein3-4/+5
As with the non-offloaded rs case, during assoc on the ap side the phy context is set to 20MHz until authorization of a client that supports wider channel-widths. Support this by sending the initial tlc_config_cmd with max supported channel width of 20MHz until authorization succeeds. Fixes: 6b7a5aea71b3 ("iwlwifi: mvm: always init rs with 20mhz bandwidth rates") Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: send BCAST management frames to the right stationEmmanuel Grumbach1-1/+1
Probe responses were sent to the multicast station while they should be routed to the broadcast station. This has no negative effect since the frame was still routed to the right queue, but it looked very fishy to send a frame to a (queue, station) tuple where 'queue' is not mapped to 'station'. Fixes: 7c305de2b954 ("iwlwifi: mvm: Direct multicast frames to the correct station") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: Add missing 11n disable module parameter checkIdo Yariv1-1/+3
In the new method of parsing the NVM the disable_11n module parameter isn't consulted when setting up HT capabilities. Fix this. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: remove channel 2 from HE radiotap if not applicableJohannes Berg1-2/+4
If the bandwidth is only 20 MHz, then the second channel doesn't exist, but the hardware reports the CRC was OK. Suppress the data of the second channel in the HE radiotap in this case, by marking it as not known. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: report # of LTF symbols for extended range SU PPDUsJohannes Berg1-2/+2
This is the same as for SU PPDUs, so it's easy to do. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: properly decode HE GI durationJohannes Berg1-6/+16
The GI duration depends on the frame type in some cases, take that into account when decoding for radiotap. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: put LTF symbol size into HE radiotapJohannes Berg1-1/+13
I evidently completely confused "number of LTF symbols" and "LTF size". Radiotap was reporting the former, while I thought it was the latter, and we really need both. Add the LTF symbol size into the newly defined field in radiotap. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: implement extended HE-MU sniffer APIJohannes Berg2-51/+206
Implement the extended HE-MU info type decoding to show the HE-SIG-B common contents in the HE-MU radiotap field. The DW4 data is partially overwritten by the hardware in all cases, so only the higher 16 bits can be used. To be able to use it for the HE SIG-B common data anyway, move the bits around in the following way: SIG-B common 0: DW 4 -> DW 7 SIG-B common 1: DW 7 -> DW 8 SIG-B common 2: DW 8 -> DW 4 (upper half) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: remove all occurrences of the FSF address paragraphLuca Coelho102-455/+0
The Free Software Foundation address is superfluous and causes checkpatch to issue a warning when present. Remove all paragraphs with FSF's address to prevent that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: pcie: set interrupt coalescing also for gen2Sara Sharon1-0/+3
We offloaded all the RX configuration of init to firmware. However, the configuration of interrupt coalescing was left hanging - it wasn't offloaded nor was it written by host. This write to the CSR is allowed in gen2, so the host can do it. Without it we have various issues with RX fullness. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: Send LQ command as async when necessaryAvraham Stern5-18/+17
The parameter that indicated whether the LQ command should be sent as sync or async was removed, causing the LQ command to be sent as sync from interrupt context (e.g. from the RX path). This resulted in a kernel warning: "scheduling while atomic" and failing to send the LQ command, which ultimately leads to a queue hang. Fix it by adding back the required parameter to send the command as sync only when it is allowed. Fixes: d94c5a820d10 ("iwlwifi: mvm: open BA session only when sta is authorized") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: avoid sending too many BARsSara Sharon1-0/+8
When we receive TX response, we may release a few packets due to a hole that was closed in the transmission window. However, if that frame failed, we will mark all the released frames as failed and will send multiple BARs. This affects statistics badly, and cause unnecessary frames transmission. Instead, mark all the following packets as success, with the desired result of sending a bar for the failed frame only. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: fix BAR seq ctrl reportingSara Sharon1-4/+5
There is a bug in FW where the sequence control may be incorrect, and the driver overrides it with the value of the ieee80211 header. However, in BAR there is no sequence control in the header, which result with arbitrary sequence. This access to an unknown location is bad and it makes the logs very confusing - so fix it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-12 14:06:26 +0300