summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi
AgeCommit message (Collapse)AuthorFilesLines
2018-08-03iwlwifi: pcie: fix race in Rx buffer allocatorShaul Triebitz1-0/+2
[ Upstream commit 0f22e40053bd5378ad1e3250e65c574fd61c0cd6 ] Make sure the rx_allocator worker is canceled before running the rx_init routine. rx_init frees and re-allocates all rxb's pages. The rx_allocator worker also allocates pages for the used rxb's. Running rx_init and rx_allocator simultaniously causes a kernel panic. Fix that by canceling the work in rx_init. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-26iwlwifi: pcie: compare with number of IRQs requested for, not number of CPUsHao Wei Tee1-5/+5
[ Upstream commit ab1068d6866e28bf6427ceaea681a381e5870a4a ] When there are 16 or more logical CPUs, we request for `IWL_MAX_RX_HW_QUEUES` (16) IRQs only as we limit to that number of IRQs, but later on we compare the number of IRQs returned to nr_online_cpus+2 instead of max_irqs, the latter being what we actually asked for. This ends up setting num_rx_queues to 17 which causes lots of out-of-bounds array accesses later on. Compare to max_irqs instead, and also add an assertion in case num_rx_queues > IWM_MAX_RX_HW_QUEUES. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=199551 Fixes: 2e5d4a8f61dc ("iwlwifi: pcie: Add new configuration to enable MSIX") Signed-off-by: Hao Wei Tee <angelsl@in04.sg> Tested-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: fix TX of CCMP 256Sara Sharon1-2/+5
[ Upstream commit de04d4fbf87b769ab18c480e4f020c53e74bbdd2 ] We don't have enough room in the TX command for a CCMP 256 key, and need to use key from table. Fixes: 3264bf032bd9 ("[BUGFIX] iwlwifi: mvm: Fix CCMP IV setting") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: always init rs with 20mhz bandwidth ratesNaftali Goldstein2-8/+24
[ Upstream commit 6b7a5aea71b342ec0593d23b08383e1f33da4c9a ] In AP mode, when a new station associates, rs is initialized immediately upon association completion, before the phy context is updated with the association parameters, so the sta bandwidth might be wider than the phy context allows. To avoid this issue, always initialize rs with 20mhz bandwidth rate, and after authorization, when the phy context is already up-to-date, re-init rs with the correct bw. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: fix security bug in PN checkingSara Sharon1-19/+20
[ Upstream commit 5ab2ba931255d8bf03009c06d58dce97de32797c ] A previous patch allowed the same PN for packets originating from the same AMSDU by copying PN only for the last packet in the series. This however is bogus since we cannot assume the last frame will be received on the same queue, and if it is received on a different ueue we will end up not incrementing the PN and possibly let the next packet to have the same PN and pass through. Change the logic instead to driver explicitly indicate for the second sub frame and on to be allowed to have the same PN as the first subframe. Indicate it to mac80211 as well for the fallback queue. Fixes: f1ae02b186d9 ("iwlwifi: mvm: allow same PN for de-aggregated AMSDU") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13iwlwifi: fix min API version for 7265D, 3168, 8000 and 8265Luca Coelho2-4/+4
[ Upstream commit 15098803d38778070b8edfa5a3d5fc4fef10d0a1 ] In a previous commit, we removed support for API versions earlier than 22 for these NICs. By mistake, the *_UCODE_API_MIN definitions were set to 17. Fix that. Fixes: 4b87e5af638b ("iwlwifi: remove support for fw older than -17 and -22") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13iwlwifi: pcie: only use d0i3 in suspend/resume if system_pm is set to d0i3Luca Coelho1-2/+4
[ Upstream commit e4c49c4937951de1cdbe35572ade40c948dec1e1 ] We only need to handle d0i3 entry and exit during suspend resume if system_pm is set to IWL_PLAT_PM_MODE_D0I3, otherwise d0i3 entry failures will cause suspend to fail. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=194791 Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13iwlwifi: tt: move ucode_loaded check under mutexJohannes Berg1-3/+5
[ Upstream commit d9954405758a0cbbe258d9b4d4dc12a06fa48a28 ] The ucode_loaded check should be under the mutex, since it can otherwise change state after we looked at it and before we got the mutex. Fix that. Fixes: 5c89e7bc557e ("iwlwifi: mvm: add registration to cooling device") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13iwlwifi: mvm: Fix command queue number on d0i3 flowHaim Dreyfuss1-1/+4
[ Upstream commit c72c37b7f392ad7edc10b6092fa48c632ba6f4ed ] During d0i3 flow we flush all the queue except from the command queue. Currently, in this flow the command queue is hard coded to 9. In DQA the command queue number has changed from 9 to 0. Fix that. This fixes a problem in runtime PM resume flow. Fixes: 097129c9e625 ("iwlwifi: mvm: move cmd queue to be #0 in dqa mode") Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13iwlwifi: mvm: fix firmware debug restart recordingEmmanuel Grumbach4-19/+27
[ Upstream commit addce854f164a68da9cb158e2e7e447705068549 ] When we want to stop the recording of the firmware debug and restart it later without reloading the firmware we don't need to resend the configuration that comes with host commands. Sending those commands confused the hardware and led to an NMI 0x66. Change the flow as following: * read the relevant registers (DBGC_IN_SAMPLE, DBGC_OUT_CTRL) * clear those registers * wait for the hardware to complete its write to the buffer * get the data * restore the value of those registers (to restart the recording) For early start (where the configuration is already compiled in the firmware), we don't need to set those registers after the firmware has been loaded, but only when we want to restart the recording without having restarted the firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24iwlwifi: a000: fix memory offsets and lengthsLiad Kaufman1-3/+3
[ Upstream commit f4d1047914ea05e0f8393944da18f6ee5dad24c4 ] Memory offsets and lengths for A000 HW is different than currently specified. Fixes: e34d975e40ff ("iwlwifi: Add a000 HW family support") Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24iwlwifi: split the handler and the wake parts of the notification infraEmmanuel Grumbach2-11/+24
[ Upstream commit 2220fb2960b72915e7fd9da640a4695dceff238c ] The notification infrastructure (iwl_notification_wait_* functions) allows to wait until a list of notifications will come up from the firmware and to run a special handler (notif_wait handler) when those are received. The operation mode notifies the notification infrastructure about any Rx being received by the mean of iwl_notification_wait_notify() which will do two things: 1) call the notif_wait handler 2) wakeup the thread that was waiting for the notification Typically, only after those two steps happened, the operation mode will run its own handler for the notification that was received from the firmware. This means that the thread that was waiting for that notification can be running before the operation mode's handler was called. When the operation mode's handler is ASYNC, things get even worse since the thread that was waiting for the notification isn't even guaranteed that the ASYNC callback was added to async_handlers_list before it starts to run. This means that even calling iwl_mvm_wait_for_async_handlers() can't guarantee that absolutely everything related to that notification has run. The following can happen: Thread sending the command Operation mode's Rx path -------------------------- ------------------------ iwl_init_notification_wait() iwl_mvm_send_cmd() iwl_mvm_rx_common() iwl_notification_wait_notify() iwl_mvm_wait_for_async_handlers() // Possibly free some data // structure list_add_tail(async_handlers_list); schedule_work(async_handlers_wk); // Access the freed structure Split the 'run notif_wait's handler' and the 'wake up the thread' parts to fix this. This allows the operation mode to do the following: Thread sending the command Operation mode's Rx path -------------------------- ------------------------ iwl_init_notification_wait() iwl_mvm_send_cmd() iwl_mvm_rx_common() iwl_notification_wait() // Will run the notif_wait's handler list_add_tail(async_handlers_list); schedule_work(async_handlers_wk); iwl_notification_notify() iwl_mvm_wait_for_async_handlers() This way, the waiter is guaranteed that all the handlers have been run (if SYNC), or at least enqueued (if ASYNC) by the time it wakes up. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22iwlwifi: mvm: rs: don't override the rate history in the search cycleEmmanuel Grumbach1-3/+1
[ Upstream commit 992172e3aec19e5b0ea5b757ba40a146b9282d1e ] When we are in a search cycle, we try different combinations of parameters. Those combinations are called 'columns'. When we switch to a new column, we first need to check if this column has a suitable rate, if not, we can't try it. This means we must not erase the statistics we gathered for the previous column until we are sure that we are indeed switching column. The code that tries to switch to a new column first sets a whole bunch of things for the new column, and only then checks that we can find suitable rates in that column. While doing that, the code mistakenly erased the rate statistics. This code was right until struct iwl_scale_tbl_info grew up for TPC. Fix this to make sure we don't erase the rate statistics until we are sure that we can indeed switch to the new column. Note that this bug is really harmless since it causes a change in the behavior only when we can't find any rate in the new column which should really not happen. In the case we do find a suitable we reset the rate statistics a few lines later anyway. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22iwlwifi: mvm: fix RX SKB header size and align it properlyJohannes Berg1-3/+15
[ Upstream commit 5cddd05c9cbe420436799716d009bc0372ef8268 ] When receiving a frame, we currently pull in sizeof(*hdr) plus some extra (crypto/snap), which is too much, most headers aren't actually sizeof(*hdr) since that takes into account the 4-address format but doesn't take into account QoS. As a result, a typical frame will have 4 bytes of the payload in the SKB header already. Fix this by calculating the correct header length, and now that we have that, align the end of the SKB header to a multiple of 4 so that the IP header will be aligned properly when pulled in. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03iwlwifi: mvm: fix the TX queue hang timeout for MONITOR vif typeEmmanuel Grumbach1-0/+2
[ Upstream commit d1b275ffec459c5ae12b5c7086c84175696e5a9f ] The MONITOR type is missing in the interface type switch. Add it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20iwlwifi: mvm: cleanup pending frames in DQA modeSara Sharon4-31/+28
[ Upstream commit 9a3fcf912ef7f5c6e18f9af6875dd13f7311f7aa ] When a station is asleep, the fw will set it as "asleep". All queues that are used only by one station will be stopped by the fw. In pre-DQA mode this was relevant for aggregation queues. However, in DQA mode a queue is owned by one station only, so all queues will be stopped. As a result, we don't expect to get filtered frames back to mac80211 and don't have to maintain the entire pending_frames state logic, the same way as we do in aggregations. The correct behavior is to align DQA behavior with the aggregation queue behaviour pre-DQA: - Don't count pending frames. - Let mac80211 know we have frames in these queues so that it can properly handle trigger frames. When a trigger frame is received, mac80211 tells the driver to send frames from the queues using release_buffered_frames. The driver will tell the fw to let frames out even if the station is asleep. This is done by iwl_mvm_sta_modify_sleep_tx_count. Reported-and-tested-by: Jens Axboe <axboe@kernel.dk> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08iwlwifi: mvm: use the PROBE_RESP_QUEUE to send deauth to unknown stationEmmanuel Grumbach1-4/+6
[ Upstream commit d45cb20e123c5d7d6cd56301bc98f0bfd725cd77 ] When we send a deauth to a station we don't know about, we need to use the PROBE_RESP queue. This can happen when we send a deauth to a station that is not associated to us. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12iwlwifi: add workaround to disable wide channels in 5GHzLuca Coelho1-11/+55
commit 01a9c948a09348950515bf2abb6113ed83e696d8 upstream. The OTP in some SKUs have erroneously allowed 40MHz and 80MHz channels in the 5.2GHz band. The firmware has been modified to not allow this in those SKUs, so the driver needs to do the same otherwise the firmware will assert when we try to use it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12iwlwifi: mvm: use IWL_HCMD_NOCOPY for MCAST_FILTER_CMDLuca Coelho1-1/+9
commit 97bce57bd7f96e1218751996f549a6e61f18cc8c upstream. The MCAST_FILTER_CMD can get quite large when we have many mcast addresses to set (we support up to 255). So the command should be send as NOCOPY to prevent a warning caused by too-long commands: WARNING: CPU: 0 PID: 9700 at /root/iwlwifi/stack-dev/drivers/net/wireless/intel/iwlwifi/pcie/tx.c:1550 iwl_pcie_enqueue_hcmd+0x8c7/0xb40 [iwlwifi] Command MCAST_FILTER_CMD (0x1d0) is too large (328 bytes) This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196743 Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09iwlwifi: pci: add new PCI ID for 7265DLuca Coelho1-0/+1
commit 3f7a5e13e85026b6e460bbd6e87f87379421d272 upstream. We have a new PCI subsystem ID for 7265D. Add it to the list. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-11iwlwifi: dvm: prevent an out of bounds accessEmmanuel Grumbach1-1/+1
commit 0b0f934e92a8eaed2e6c48a50eae6f84661f74f3 upstream. iwlagn_check_ratid_empty takes the tid as a parameter, but it doesn't check that it is not IWL_TID_NON_QOS. Since IWL_TID_NON_QOS = 8 and iwl_priv::tid_data is an array with 8 entries, accessing iwl_priv::tid_data[IWL_TID_NON_QOS] is a bad idea. This happened in iwlagn_rx_reply_tx. Since iwlagn_check_ratid_empty is relevant only to check whether we can open A-MPDU, this flow is irrelevant if tid is IWL_TID_NON_QOS. Call iwlagn_check_ratid_empty only inside the if (tid != IWL_TID_NON_QOS) a few lines earlier in the function. Reported-by: Seraphime Kirkovski <kirkseraph@gmail.com> Tested-by: Seraphime Kirkovski <kirkseraph@gmail.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05iwlwifi: fix kernel crash when unregistering thermal zoneJens Axboe1-4/+8
[ Upstream commit 92549cdc288f47f3a98cf80ac5890c91f5876a06 ] A recent firmware change seems to have enabled thermal zones on the iwlwifi driver. Unfortunately, my device fails when registering the thermal zone. This doesn't stop the driver from attempting to unregister the thermal zone at unload time, triggering a NULL pointer deference in strlen() off the thermal_zone_device_unregister() path. Don't unregister if name is NULL, for that case we failed registering. Do the same for the cooling zone. Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14iwlwifi: mvm: writing zero bytes to debugfs causes a crashDan Carpenter1-0/+2
commit 251fe09f13bfb54c1ede66ee8bf8ddd0061c4f7c upstream. This is a static analysis fix. The warning is: drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c:912 iwl_mvm_fw_dbg_collect() warn: integer overflows 'sizeof(*desc) + len' I guess this code is supposed to take a NUL character, but if we write zero bytes then it tries to write -1 characters and crashes. Fixes: c91b865cb14d ("iwlwifi: mvm: support description for user triggered fw dbg collection") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14iwlwifi: mvm: synchronize firmware DMA paging memorySara Sharon2-3/+24
commit 4b70f07686d75d1eb5d956812cc810944e0b29b2 upstream. When driver needs to access the contents of a streaming DMA buffer without unmapping it it should call dma_sync_single_for_cpu(). Once the call has been made, the CPU "owns" the DMA buffer and can work with it as needed. Before the device accesses the buffer, however, ownership should be transferred back to it with dma_sync_single_for_device(). Both calls weren't performed by the driver, resulting with odd paging errors on some platforms. Fix it. Fixes: a6c4fb4441f4 ("iwlwifi: mvm: Add FW paging mechanism for the UMAC on PCI") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14iwlwifi: mvm: fix references to first_agg_queue in DQA modeSara Sharon1-4/+3
commit c56108b58ab870892277940a1def0d6b153f3e26 upstream. In DQA mode, first_agg_queue is initialized to IWL_MVM_DQA_MIN_DATA_QUEUE. This causes two bugs in the tx response flow: 1. When TX fails, we set IEEE80211_TX_STAT_AMPDU_NO_BACK regardless if we actually have aggregation open on the queue. This causes mac80211 to send a BAR frame even though there is no aggregation open. Fix that by simply checking the AMPDU flag that is set on by mac80211 for AMPDU packets. 2. When reclaiming frames in aggregation mode, we reclaim based on scheduler ssn and not the SN. The reason is that scheduler ssn may be ahead of SN due to a hole in the BA window that was filled. However, if we have aggregations open on IWL_MVM_DQA_BSS_CLIENT_QUEUE the reclaim flow will still go to the code of non-aggregation instead of the aggregation code since IWL_MVM_DQA_BSS_CLIENT_QUEUE is smaller than IWL_MVM_DQA_MIN_DATA_QUEUE, although it is a valid aggregation queue. Fix that by always using the aggregation reclaim code by default in DQA mode (currently it is implicitly used by default for all queues except the reserved BSS queue). Fixes: cf961e16620f ("iwlwifi: mvm: support dqa-mode agg on non-shared queue") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14iwlwifi: mvm: fix pending frame counter calculationSara Sharon2-12/+24
commit 94c3e614df2117626fccfac8f821c66e30556384 upstream. In DQA mode the check whether to decrement the pending frames counter relies on the tid status and not on the txq id. This may result in an inconsistent state of the pending frames counter in case frame is queued on a non aggregation queue but with this TID, and will be followed by a failure to remove the station and later on SYSASSERT 0x3421 when trying to remove the MAC. Such frames are for example bar and qos NDPs. Fix it by aligning the condition of incrementing the counter with the condition of decrementing it - rely on TID state for DQA mode. Also, avoid internal error like this affecting station removal for DQA mode - since we can know for sure it is an internal error. Fixes: cf961e16620f ("iwlwifi: mvm: support dqa-mode agg on non-shared queue") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14iwlwifi: mvm/pcie: adjust A-MSDU tx_cmd length in PCIeJohannes Berg2-39/+22
commit 05e5a7e58d3f8f597ebe6f78aaa13a2656b78239 upstream. Instead of setting the tx_cmd length in the mvm code, which is complicated by the fact that DQA may want to temporarily store the SKB on the side, adjust the length in the PCIe code which also knows about this since it's responsible for duplicating all those headers that are account for in this code. As the PCIe code already relies on the tx_cmd->len field, this doesn't really introduce any new dependencies. To make this possible we need to move the memcpy() of the TX command until after it was updated. This does even simplify the code though, since the PCIe code already does a lot of manipulations to build A-MSDUs correctly and changing the length becomes a simple operation to see how much was added/removed, rather than predicting it. Fixes: 24afba7690e4 ("iwlwifi: mvm: support bss dynamic alloc/dealloc of queues") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14iwlwifi: mvm: Use aux queue for offchannel frames in dqaBeni Lev1-4/+6
commit 6574dc943fc32a2fce69fab14891abca7eecb67c upstream. Since offchannel activity doesn't always require a BSS, e.g. ANQP sessions, offchannel frames should not use the BSS queue, because it might not be initialized. Use the auxilary queue instead Fixes: e3118ad74d7e ("iwlwifi: mvm: support tdls in dqa mode") Signed-off-by: Beni Lev <beni.lev@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14iwlwifi: mvm: fix reorder timer re-armingSara Sharon1-1/+2
commit 5351f9ab254c30d41659924265f1ecd7b4758d9e upstream. When NSSN is behind the reorder buffer due to timeout the reorder timer isn't getting re-armed until NSSN catches up. Fix it. Fixes: 0690405fef29 ("iwlwifi: mvm: add reorder timeout per frame") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14iwlwifi: pcie: fix the set of DMA memory maskSara Sharon1-6/+2
commit 2c6262b754f3c3338cb40b23880a3ac1f4693b25 upstream. Our 9000 device supports 64 bit DMA address for RX only, and not for TX. Setting DMA mask to 64 for the whole device is erroneous - we can do it only for a000 devices where device is capable of both RX & TX DMA with 64 bit address space. Fixes: 96a6497bc3ed ("iwlwifi: pcie: add 9000 series multi queue rx DMA support") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14iwlwifi: pcie: trans: Remove unused 'shift_param'Kirtika Ruchandani1-6/+2
commit 3ce4a03852d6dd3fd28c2fb2ee9f89bb9ccf9a9b upstream. shift_param is defined and set in iwl_pcie_load_cpu_sections but not used. Fix this to avoid -Wunused-but-set-variable warning. The code using it turned into dead code with commit dcab8ecd5617 ("iwlwifi: mvm: support ucode load for family_8000 B0 only") which added a separate function iwl_pcie_load_given_ucode_8000 (then 8000b) for IWL_DEVICE_FAMILY_8000. Commit 76f8c0e17edc ("iwlwifi: pcie: remove dead code") removed the dead code but left shift_param as is. iwlwifi/pcie/trans.c: In function ‘iwl_pcie_load_cpu_sections’: iwlwifi/pcie/trans.c:871:6: warning: variable ‘shift_param’ set but not used [-Wunused-but-set-variable] Fixes: dcab8ecd5617 ("iwlwifi: mvm: support ucode load for family_8000 B0 only") Fixes: 76f8c0e17edc ("iwlwifi: pcie: remove dead code") Signed-off-by: Kirtika Ruchandani <kirtika@google.com> Cc: Sara Sharon <sara.sharon@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Liad Kaufman <liad.kaufman@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [removed some unnecessary braces] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14iwlwifi: pcie: don't increment / decrement a boolEmmanuel Grumbach1-1/+1
commit 04fa3e680b4dd2fdd11d0152fb9b6067e7aac140 upstream. David reported that the code I added uses the decrement and increment operator on a boolean variable. Fix that. Fixes: 0cd58eaab148 ("iwlwifi: pcie: allow the op_mode to block the tx queues") Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14iwlwifi: mvm: overwrite skb info laterJohannes Berg1-5/+15
commit bd05a5bd6b11d7fd26a668de83c5cb996de05f8f upstream. We don't really need clear the skb's status area nor store the dev_cmd into it until we really commit to the frame by handing it to the transport - defer those operations until just before we do that. This doesn't entirely fix the bug with frames not getting sent out after having been deferred due to DQA, because it doesn't restore the info->driver_data[0] place that was already set to zero (or another value) by the A-MSDU logic. Fixes: 24afba7690e4 ("iwlwifi: mvm: support bss dynamic alloc/dealloc of queues") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14iwlwifi: mvm: don't restart HW if suspend fails with unified imageLuca Coelho1-5/+8
commit bac453ab3745eaa64137ea6e77e009b45954f0ae upstream. For unified images, we shouldn't restart the HW if suspend fails. The only reason for restarting the HW with non-unified images is to go back to the D0 image. Fixes: 23ae61282b88 ("iwlwifi: mvm: Do not switch to D3 image on suspend") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14iwlwifi: fix MODULE_FIRMWARE for 6030Jürg Billeter1-1/+1
commit d8320d75b59ecdc1b8e60ac793d3a54d84333a18 upstream. IWL6000G2B_UCODE_API_MAX is not defined. ucode_api_max of IWL_DEVICE_6030 uses IWL6000G2_UCODE_API_MAX. Use this also for MODULE_FIRMWARE. Fixes: 9d9b21d1b616 ("iwlwifi: remove IWL_*_UCODE_API_OK") Signed-off-by: Jürg Billeter <j@bitron.ch> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-09iwlwifi: mvm: avoid crash on restart w/o reserved queuesJohannes Berg1-3/+4
commit 03c902bff524e0cf664737a33f2365f7837040bf upstream. When the firmware restarts in a situation in which any station has no queue reserved anymore because that queue was used, the code will crash trying to access the queue_info array at the offset 255, which is far too big. Fix this by checking that a queue is actually reserved before writing its status. Fixes: 8d98ae6eb0d5 ("iwlwifi: mvm: re-assign old queues after hw restart in dqa mode") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-09iwlwifi: fix double hyphen in MODULE_FIRMWARE for 8000Jürg Billeter1-1/+1
commit 7941c59e45f3b6d30e07375e9b6713427e0a9f98 upstream. Mistakenly, the driver is trying to load the 8000C firmware with an incorrect name (i.e. with two hyphens where there should be only one) and that fails. Fix that by removing the hyphen from the format macro. Fixes: e1ba684f762b ("iwlwifi: 8000: fix MODULE_FIRMWARE input") Signed-off-by: Jürg Billeter <j@bitron.ch> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27Merge tag 'iwlwifi-for-kalle-2015-10-25' of ↵Kalle Valo9-53/+128
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * some fixes for suspend/resume with unified FW images; * a fix for a false-positive lockdep report; * a fix for multi-queue that caused an unnecessary 1 second latency; * a fix for an ACPI parsing bug that caused a misleading error message;
2016-10-19iwlwifi: mvm: fix netdetect starting/stopping for unified imagesLuca Coelho2-6/+46
With unified images, we need to make sure the net-detect scan is stopped after resuming, since we don't restart the FW. Also, we need to make sure we check if there are enough scan slots available to run it, as we do with other scans. Fixes: commit 23ae61282b88 ("iwlwifi: mvm: Do not switch to D3 image on suspend") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-10-19iwlwifi: pcie: fix SPLC structure parsingLuca Coelho1-31/+48
The SPLC data parsing is too restrictive and was not trying find the correct element for WiFi. This causes problems with some BIOSes where the SPLC method exists, but doesn't have a WiFi entry on the first element of the list. The domain type values are also incorrect according to the specification. Fix this by complying with the actual specification. Additionally, replace all occurrences of SPLX to SPLC, since SPLX is only a structure internal to the ACPI tables, and may not even exist. Fixes: bcb079a14d75 ("iwlwifi: pcie: retrieve and parse ACPI power limitations") Reported-by: Chris Rorvick <chris@rorvick.com> Tested-by: Paul Bolle <pebolle@tiscali.nl> Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-10-19iwlwifi: mvm: wake the wait queue when the RX sync counter is zeroSara Sharon4-3/+5
When we sync the RX queues the driver waits to receive echo notification on all the RX queues. The wait queue is set with timeout until all queues have received the notification. However, iwl_mvm_rx_queue_notif() never woke up the wait queue, with the result of the counter value being checked only when the timeout expired. This may cause a latency of up to 1 second. Fixes: 0636b938214c ("iwlwifi: mvm: implement driver RX queues sync command") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-10-19iwlwifi: mvm: comply with fw_restart mod param on suspendHaim Dreyfuss1-1/+4
If the suspend flow fails, we restart the hardware to go back to the D0 image (with non-unified images), but we don't comply with the fw_restart module parameter. If something goes wrong when starting the D3 image, we may want to debug it, so we should comply with the fw_restart flag to avoid clearing everything up and losing the firmware state when the error occurred. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-10-19iwlwifi: mvm: fix d3_test with unified D0/D3 imagesLuca Coelho1-10/+15
When a unified D0/D3 image is used, we don't restart the FW in the D0->D3->D0 transitions. Therefore, the d3_test functionality should not call ieee8021_restart_hw() when the resuming either. Fixes: commit 23ae61282b88 ("iwlwifi: mvm: Do not switch to D3 image on suspend") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-10-19iwlwifi: mvm: use ssize_t for len in iwl_debugfs_mem_read()Luca Coelho1-2/+2
In iwl_dbgfs_mem_read(), the len variable may become negative and is compared to < 0 (an error case). Comparing size_t (which is unsigned) to < 0 causes a warning on certain platforms (like i386): drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c:1561:5-8: WARNING: Unsigned expression compared with zero: len < 0 To prevent that, use ssize_t for len instead. Fixes: commit 2b55f43f8e47 ("iwlwifi: mvm: Add mem debugfs entry") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-10-19iwlwifi: pcie: mark command queue lock with separate lockdep classJohannes Berg1-0/+8
Emmanuel reports that when CMD_WANT_ASYNC_CALLBACK is used by mvm, the callback will be called with the command queue lock held, and mvm will try to stop all (other) TX queues, which acquires their locks - this caused a false lockdep recursive locking report. Suppress this report by marking the command queue lock with a new, separate, lock class so lockdep can tell the difference between the two types of queues. Fixes: 156f92f2b471 ("iwlwifi: block the queues when we send ADD_STA for uAPSD") Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-10-10Merge branch 'work.misc' of ↵Linus Torvalds3-16/+10
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted misc bits and pieces. There are several single-topic branches left after this (rename2 series from Miklos, current_time series from Deepa Dinamani, xattr series from Andreas, uaccess stuff from from me) and I'd prefer to send those separately" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (39 commits) proc: switch auxv to use of __mem_open() hpfs: support FIEMAP cifs: get rid of unused arguments of CIFSSMBWrite() posix_acl: uapi header split posix_acl: xattr representation cleanups fs/aio.c: eliminate redundant loads in put_aio_ring_file fs/internal.h: add const to ns_dentry_operations declaration compat: remove compat_printk() fs/buffer.c: make __getblk_slow() static proc: unsigned file descriptors fs/file: more unsigned file descriptors fs: compat: remove redundant check of nr_segs cachefiles: Fix attempt to read i_blocks after deleting file [ver #2] cifs: don't use memcpy() to copy struct iov_iter get rid of separate multipage fault-in primitives fs: Avoid premature clearing of capabilities fs: Give dentry to inode_change_ok() instead of inode fuse: Propagate dentry down to inode_change_ok() ceph: Propagate dentry down to inode_change_ok() xfs: Propagate dentry down to inode_change_ok() ...
2016-10-08Merge branch 'work.const-qstr' into work.miscAl Viro3-16/+10
2016-09-30Merge tag 'wireless-drivers-next-for-davem-2016-09-29' of ↵David S. Miller44-881/+1628
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: wireless-drivers-next patches for 4.9 Major changes: iwlwifi * work for new hardware support continues * dynamic queue allocation stabilization * improvements in the MSIx code * multiqueue support work continues * new firmware version support (API 26) * add 8275 series support * add 9560 series support * add support for MU-MIMO sniffer * add support for RRM by scan * add support for "reverse" rx packet injection faking hw descriptors * migrate to devm memory allocation handling * Remove support for older firmwares (API older than -17 and -22) wl12xx * support booting the same rootfs with both wl12xx and wl18xx hostap * mark the driver as obsolete ath9k * disable RNG by default ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26iwlwifi: mvm: initialise ADD_STA before sending it to the firmwareEmmanuel Grumbach1-1/+1
When we unshare a queue, the ADD_STA was not properly initialised. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-26iwlwifi: allow error table address new rangeSara Sharon1-1/+1
The firmware has a new smart linker, and this table can now be in ICCM or in SMEM. It is not hardcoded, but depends on code size. Allow the full range. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-14 14:59:32 +0300