summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi
AgeCommit message (Collapse)AuthorFilesLines
2019-07-31iwlwifi: mvm: Drop large non sta framesAndrei Otcheretianski1-0/+3
[ Upstream commit ac70499ee97231a418dc1a4d6c9dc102e8f64631 ] In some buggy scenarios we could possible attempt to transmit frames larger than maximum MSDU size. Since our devices don't know how to handle this, it may result in asserts, hangs etc. This can happen, for example, when we receive a large multicast frame and try to transmit it back to the air in AP mode. Since in a legal scenario this should never happen, drop such frames and warn about it. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-21iwlwifi: Fix double-free problems in iwl_req_fw_callback()Jia-Ju Bai1-1/+0
[ Upstream commit a8627176b0de7ba3f4524f641ddff4abf23ae4e4 ] In the error handling code of iwl_req_fw_callback(), iwl_dealloc_ucode() is called to free data. In iwl_drv_stop(), iwl_dealloc_ucode() is called again, which can cause double-free problems. To fix this bug, the call to iwl_dealloc_ucode() in iwl_req_fw_callback() is deleted. This bug is found by a runtime fuzzing tool named FIZZER written by us. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31iwlwifi: pcie: don't crash on invalid RX interruptJohannes Berg1-1/+6
[ Upstream commit 30f24eabab8cd801064c5c37589d803cb4341929 ] If for some reason the device gives us an RX interrupt before we're ready for it, perhaps during device power-on with misconfigured IRQ causes mapping or so, we can crash trying to access the queues. Prevent that by checking that we actually have RXQs and that they were properly allocated. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-25iwlwifi: mvm: check for length correctness in iwl_mvm_create_skb()Luca Coelho1-4/+24
[ Upstream commit de1887c064b9996ac03120d90d0a909a3f678f98 ] We don't check for the validity of the lengths in the packet received from the firmware. If the MPDU length received in the rx descriptor is too short to contain the header length and the crypt length together, we may end up trying to copy a negative number of bytes (headlen - hdrlen < 0) which will underflow and cause us to try to copy a huge amount of data. This causes oopses such as this one: BUG: unable to handle kernel paging request at ffff896be2970000 PGD 5e201067 P4D 5e201067 PUD 5e205067 PMD 16110d063 PTE 8000000162970161 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 1824 Comm: irq/134-iwlwifi Not tainted 4.19.33-04308-geea41cf4930f #1 Hardware name: [...] RIP: 0010:memcpy_erms+0x6/0x10 Code: 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe RSP: 0018:ffffa4630196fc60 EFLAGS: 00010287 RAX: ffff896be2924618 RBX: ffff896bc8ecc600 RCX: 00000000fffb4610 RDX: 00000000fffffff8 RSI: ffff896a835e2a38 RDI: ffff896be2970000 RBP: ffffa4630196fd30 R08: ffff896bc8ecc600 R09: ffff896a83597000 R10: ffff896bd6998400 R11: 000000000200407f R12: ffff896a83597050 R13: 00000000fffffff8 R14: 0000000000000010 R15: ffff896a83597038 FS: 0000000000000000(0000) GS:ffff896be8280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff896be2970000 CR3: 000000005dc12002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: iwl_mvm_rx_mpdu_mq+0xb51/0x121b [iwlmvm] iwl_pcie_rx_handle+0x58c/0xa89 [iwlwifi] iwl_pcie_irq_rx_msix_handler+0xd9/0x12a [iwlwifi] irq_thread_fn+0x24/0x49 irq_thread+0xb0/0x122 kthread+0x138/0x140 ret_from_fork+0x1f/0x40 Fix that by checking the lengths for correctness and trigger a warning to show that we have received wrong data. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05iwlwifi: pcie: fix emergency pathSara Sharon1-3/+8
[ Upstream commit c6ac9f9fb98851f47b978a9476594fc3c477a34d ] Allocator swaps the pending requests with 0 when it starts working. This means that relying on it n RX path to decide if to move to emergency is not always a good idea, since it may be zero, but there are still a lot of unallocated RBs in the system. Change allocator to decrement the pending requests on real time. It is more expensive since it accesses the atomic variable more times, but it gives the RX path a better idea of the system's status. Reported-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Sara Sharon <sara.sharon@intel.com> Fixes: 868a1e863f95 ("iwlwifi: pcie: avoid empty free RB queue") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-29iwlwifi: add new cards for 9560, 9462, 9461 and killer seriesIhab Zhaika1-0/+50
commit f108703cb5f199d0fc98517ac29a997c4c646c94 upstream. add few PCI ID'S for 9560, 9462, 9461 and killer series. Cc: stable@vger.kernel.org Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-29iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT to old firmwaresEmmanuel Grumbach1-0/+9
commit eca1e56ceedd9cc185eb18baf307d3ff2e4af376 upstream. Old firmware versions don't support this command. Sending it to any firmware before -41.ucode will crash the firmware. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201975 Fixes: 66e839030fd6 ("iwlwifi: fix wrong WGDS_WIFI_DATA_SIZE") CC: <stable@vger.kernel.org> #4.19+ Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01iwlwifi: fix wrong WGDS_WIFI_DATA_SIZEMatt Chen1-2/+2
commit 66e839030fd698586734e017fd55c4f2a89dba0b upstream. From coreboot/BIOS: Name ("WGDS", Package() { Revision, Package() { DomainType, // 0x7:WiFi ==> We miss this one. WgdsWiFiSarDeltaGroup1PowerMax1, // Group 1 FCC 2400 Max WgdsWiFiSarDeltaGroup1PowerChainA1, // Group 1 FCC 2400 A Offset WgdsWiFiSarDeltaGroup1PowerChainB1, // Group 1 FCC 2400 B Offset WgdsWiFiSarDeltaGroup1PowerMax2, // Group 1 FCC 5200 Max WgdsWiFiSarDeltaGroup1PowerChainA2, // Group 1 FCC 5200 A Offset WgdsWiFiSarDeltaGroup1PowerChainB2, // Group 1 FCC 5200 B Offset WgdsWiFiSarDeltaGroup2PowerMax1, // Group 2 EC Jap 2400 Max WgdsWiFiSarDeltaGroup2PowerChainA1, // Group 2 EC Jap 2400 A Offset WgdsWiFiSarDeltaGroup2PowerChainB1, // Group 2 EC Jap 2400 B Offset WgdsWiFiSarDeltaGroup2PowerMax2, // Group 2 EC Jap 5200 Max WgdsWiFiSarDeltaGroup2PowerChainA2, // Group 2 EC Jap 5200 A Offset WgdsWiFiSarDeltaGroup2PowerChainB2, // Group 2 EC Jap 5200 B Offset WgdsWiFiSarDeltaGroup3PowerMax1, // Group 3 ROW 2400 Max WgdsWiFiSarDeltaGroup3PowerChainA1, // Group 3 ROW 2400 A Offset WgdsWiFiSarDeltaGroup3PowerChainB1, // Group 3 ROW 2400 B Offset WgdsWiFiSarDeltaGroup3PowerMax2, // Group 3 ROW 5200 Max WgdsWiFiSarDeltaGroup3PowerChainA2, // Group 3 ROW 5200 A Offset WgdsWiFiSarDeltaGroup3PowerChainB2, // Group 3 ROW 5200 B Offset } }) When read the ACPI data to find out the WGDS, the DATA_SIZE is never matched. From the above format, it gives 19 numbers, but our driver is hardcode as 18. Fix it to pass then can parse the data into our wgds table. Then we will see: iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init Sending GEO_TX_POWER_LIMIT iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[0] Band[0]: chain A = 68 chain B = 69 max_tx_power = 54 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[0] Band[1]: chain A = 48 chain B = 49 max_tx_power = 70 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[1] Band[0]: chain A = 51 chain B = 67 max_tx_power = 50 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[1] Band[1]: chain A = 69 chain B = 70 max_tx_power = 68 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[2] Band[0]: chain A = 49 chain B = 50 max_tx_power = 48 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[2] Band[1]: chain A = 52 chain B = 53 max_tx_power = 51 Cc: stable@vger.kernel.org # 4.12+ Fixes: a6bff3cb19b7 ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table") Signed-off-by: Matt Chen <matt.chen@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01iwlwifi: mvm: don't use SAR Geo if basic SAR is not usedLuca Coelho1-8/+28
commit 5d041c46ccb9b48acc110e214beff5e2789311df upstream. We can't use SAR Geo if basic SAR is not enabled, since the SAR Geo tables define offsets in relation to the basic SAR table in use. To fix this, make iwl_mvm_sar_init() return one in case WRDS is not available, so we can skip reading WGDS entirely. Fixes: a6bff3cb19b7 ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01iwlwifi: mvm: fix regulatory domain update when the firmware startsEmmanuel Grumbach2-5/+8
commit 82715ac71e6b94a2c2136e31f3a8e6748e33aa8c upstream. When the firmware starts, it doesn't have any regulatory information, hence it uses the world wide limitations. The driver can feed the firmware with previous knowledge that was kept in the driver, but the firmware may still not update its internal tables. This happens when we start a BSS interface, and then the firmware can change the regulatory tables based on our location and it'll use more lenient, location specific rules. Then, if the firmware is shut down (when the interface is brought down), and then an AP interface is created, the firmware will forget the country specific rules. The host will think that we are in a certain country that may allow channels and will try to teach the firmware about our location, but the firmware may still not allow to drop the world wide limitations and apply country specific rules because it was just re-started. In this case, the firmware will reply with MCC_RESP_ILLEGAL to the MCC_UPDATE_CMD. In that case, iwlwifi needs to let the upper layers (cfg80211 / hostapd) know that the channel list they know about has been updated. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201105 Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01iwlwifi: mvm: support sta_statistics() even on older firmwareEmmanuel Grumbach1-4/+0
commit ec484d03ef0df8d34086b95710e355a259cbe1f2 upstream. The oldest firmware supported by iwlmvm do support getting the average beacon RSSI. Enable the sta_statistics() call from mac80211 even on older firmware versions. Fixes: 33cef9256342 ("iwlwifi: mvm: support beacon statistics for BSS client") Cc: stable@vger.kernel.org # 4.2+ Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13iwlwifi: mvm: check return value of rs_rate_from_ucode_rate()Luca Coelho1-5/+19
commit 3d71c3f1f50cf309bd20659422af549bc784bfff upstream. The rs_rate_from_ucode_rate() function may return -EINVAL if the rate is invalid, but none of the callsites check for the error, potentially making us access arrays with index IWL_RATE_INVALID, which is larger than the arrays, causing an out-of-bounds access. This will trigger KASAN warnings, such as the one reported in the bugzilla issue mentioned below. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=200659 Cc: stable@vger.kernel.org Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13iwlwifi: mvm: fix BAR seq ctrl reportingSara Sharon1-4/+5
[ Upstream commit 941ab4eb66c10bc5c7234e83a7a858b2806ed151 ] There is a bug in FW where the sequence control may be incorrect, and the driver overrides it with the value of the ieee80211 header. However, in BAR there is no sequence control in the header, which result with arbitrary sequence. This access to an unknown location is bad and it makes the logs very confusing - so fix it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13iwlwifi: mvm: clear HW_RESTART_REQUESTED when stopping the interfaceEmmanuel Grumbach1-3/+6
[ Upstream commit 155f7e0441cd121b1e673d465a35e99f4b9b2f0b ] Fix a bug that happens in the following scenario: 1) suspend without WoWLAN 2) mac80211 calls drv_stop because of the suspend 3) __iwl_mvm_mac_stop deallocates the aux station 4) during drv_stop the firmware crashes 5) iwlmvm: * sets IWL_MVM_STATUS_HW_RESTART_REQUESTED * asks mac80211 to kick the restart flow 6) mac80211 puts the restart worker into a freezable queue which means that the worker will not run for now since the workqueue is already frozen 7) ... 8) resume 9) mac80211 runs ieee80211_reconfig as part of the resume 10) mac80211 detects that a restart flow has been requested and that we are now resuming from suspend and cancels the restart worker 11) mac80211 calls drv_start() 12) __iwl_mvm_mac_start checks that IWL_MVM_STATUS_HW_RESTART_REQUESTED clears it, sets IWL_MVM_STATUS_IN_HW_RESTART and calls iwl_mvm_restart_cleanup() 13) iwl_fw_error_dump gets called and accesses the device to get debug data 14) iwl_mvm_up adds the aux station 15) iwl_mvm_add_aux_sta() allocates an internal station for the aux station 16) iwl_mvm_allocate_int_sta() tests IWL_MVM_STATUS_IN_HW_RESTART and doesn't really allocate a station ID for the aux station 17) a new queue is added for the aux station Note that steps from 5 to 9 aren't really part of the problem but were described for the sake of completeness. Once the iwl_mvm_mac_stop() is called, the device is not accessible, meaning that step 12) can't succeed and we'll see the following: drivers/net/wireless/intel/iwlwifi/pcie/trans.c:2122 iwl_trans_pcie_grab_nic_access+0xc0/0x1d6 [iwlwifi]() Timeout waiting for hardware access (CSR_GP_CNTRL 0x080403d8) Call Trace: [<ffffffffc03e6ad3>] iwl_trans_pcie_grab_nic_access+0xc0/0x1d6 [iwlwifi] [<ffffffffc03e6a13>] iwl_trans_pcie_dump_regs+0x3fd/0x3fd [iwlwifi] [<ffffffffc03dad42>] iwl_fw_error_dump+0x4f5/0xe8b [iwlwifi] [<ffffffffc04bd43e>] __iwl_mvm_mac_start+0x5a/0x21a [iwlmvm] [<ffffffffc04bd6d2>] iwl_mvm_mac_start+0xd4/0x103 [iwlmvm] [<ffffffffc042d378>] drv_start+0xa1/0xc5 [iwl7000_mac80211] [<ffffffffc045a339>] ieee80211_reconfig+0x145/0xf50 [mac80211] [<ffffffffc044788b>] ieee80211_resume+0x62/0x66 [mac80211] [<ffffffffc0366c5b>] wiphy_resume+0xa9/0xc6 [cfg80211] The station id of the aux station is set to 0xff in step 3 and because we don't really allocate a new station id for the auxliary station (as explained in 16), we end up sending a command to the firmware asking to connect the queue to station id 0xff. This makes the firmware crash with the following information: 0x00002093 | ADVANCED_SYSASSERT 0x000002F0 | trm_hw_status0 0x00000000 | trm_hw_status1 0x00000B38 | branchlink2 0x0001978C | interruptlink1 0x00000000 | interruptlink2 0xFF080501 | data1 0xDEADBEEF | data2 0xDEADBEEF | data3 Firmware error during reconfiguration - reprobe! FW error in SYNC CMD SCD_QUEUE_CFG Fix this by clearing IWL_MVM_STATUS_HW_RESTART_REQUESTED in iwl_mvm_mac_stop(). We won't be able to collect debug data anyway and when we will brought up again, we will have a clean state from the firmware perspective. Since we won't have IWL_MVM_STATUS_IN_HW_RESTART set in step 12) we won't get to the 2093 ASSERT either. Fixes: bf8b286f86fc ("iwlwifi: mvm: defer setting IWL_MVM_STATUS_IN_HW_RESTART") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13iwlwifi: pcie: avoid empty free RB queueShaul Triebitz1-11/+21
[ Upstream commit 868a1e863f95183f00809363fefba6d4f5bcd116 ] If all free RB queues are empty, the driver will never restock the free RB queue. That's because the restocking happens in the Rx flow, and if the free queue is empty there will be no Rx. Although there's a background worker (a.k.a. allocator) allocating memory for RBs so that the Rx handler can restock them, the worker may run only after the free queue has become empty (and then it is too late for restocking as explained above). There is a solution for that called 'emergency': If the number of used RB's reaches half the amount of all RB's, the Rx handler will not wait for the allocator but immediately allocate memory for the used RB's and restock the free queue. But, since the used RB's is per queue, it may happen that the used RB's are spread between the queues such that the emergency check will fail for each of the queues (and still run out of RBs, causing the above symptom). To fix it, move to emergency mode if the sum of *all* used RBs (for all Rx queues) reaches half the amount of all RB's Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-04iwlwifi: fix the ALIVE notification layoutEmmanuel Grumbach1-2/+2
[ Upstream commit 5cd2d8fc6c6bca979ac5dd8ad0e41153f1f982f9 ] The ucode_major and ucode_minor were swapped. This has no practical consequences since those fields are not used. Same goes for umac_major and umac_minor which were only printed under certain debug flags. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-04iwlwifi: dbg: allow wrt collection before ALIVELiad Kaufman1-1/+14
[ Upstream commit dfd4b08cf44f27587e2053e006e43a1603328006 ] Even if no ALIVE was received, the WRT data can still be collected. Add this. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-04iwlwifi: mvm: check for short GI only for OFDMSara Sharon2-2/+5
[ Upstream commit 4c59ff5a9a9c54cc26c807dc2fa6933f7e9fa4ef ] This bit will be used in CCK to indicate short preamble. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-08-06iwlwifi: add more card IDs for 9000 seriesEmmanuel Grumbach3-0/+96
commit 0a5257bc6d89c2ae69b9bf955679cb4f89261874 upstream. Add new device IDs for the 9000 series. Cc: stable@vger.kernel.org # 4.14 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-03iwlwifi: pcie: fix race in Rx buffer allocatorShaul Triebitz1-0/+2
[ Upstream commit 0f22e40053bd5378ad1e3250e65c574fd61c0cd6 ] Make sure the rx_allocator worker is canceled before running the rx_init routine. rx_init frees and re-allocates all rxb's pages. The rx_allocator worker also allocates pages for the used rxb's. Running rx_init and rx_allocator simultaniously causes a kernel panic. Fix that by canceling the work in rx_init. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-08iwlwifi: pcie: compare with number of IRQs requested for, not number of CPUsHao Wei Tee1-5/+5
[ Upstream commit ab1068d6866e28bf6427ceaea681a381e5870a4a ] When there are 16 or more logical CPUs, we request for `IWL_MAX_RX_HW_QUEUES` (16) IRQs only as we limit to that number of IRQs, but later on we compare the number of IRQs returned to nr_online_cpus+2 instead of max_irqs, the latter being what we actually asked for. This ends up setting num_rx_queues to 17 which causes lots of out-of-bounds array accesses later on. Compare to max_irqs instead, and also add an assertion in case num_rx_queues > IWM_MAX_RX_HW_QUEUES. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=199551 Fixes: 2e5d4a8f61dc ("iwlwifi: pcie: Add new configuration to enable MSIX") Signed-off-by: Hao Wei Tee <angelsl@in04.sg> Tested-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-26iwlwifi: fw: harden page loading codeLuca Coelho1-8/+41
commit 9039d985811d5b109b58b202b7594fd24e433fed upstream. The page loading code trusts the data provided in the firmware images a bit too much and may cause a buffer overflow or copy unknown data if the block sizes don't match what we expect. To prevent potential problems, harden the code by checking if the sizes we are copying are what we expect. Cc: stable@vger.kernel.org Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: check if mac80211_queue is valid in iwl_mvm_disable_txqLuca Coelho1-2/+9
[ Upstream commit 9a233bb8025105db9a60b5d761005cc5a6c77f3d ] Sometimes iwl_mvm_disable_txq() may be called with mac80211_queue == IEEE80211_INVAL_HW_QUEUE, and this would cause us to use BIT(0xFF) which is way too large for the u16 we used to store it in hw_queue_to_mac820211. If this happens the following UBSAN warning will be generated: [ 167.185167] UBSAN: Undefined behaviour in drivers/net/wireless/intel/iwlwifi/mvm/utils.c:838:5 [ 167.185171] shift exponent 255 is too large for 64-bit type 'long unsigned int' Fix that by checking that it is not IEEE80211_INVAL_HW_QUEUE and, while at it, add a warning if the queue number is larger than IEEE80211_MAX_QUEUES. Fixes: 34e10860ae8d ("iwlwifi: mvm: remove references to queue_info in new TX path") Reported-by: Paul Menzel <pmenzel+linux-wireless@molgen.mpg.de> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: fix array out of bounds referenceAvraham Stern1-27/+11
[ Upstream commit 4a6d2e525b43eba5870ea7e360f59aa65de00705 ] When starting aggregation, the code checks the status of the queue allocated to the aggregation tid, which might not yet be allocated and thus the queue index may be invalid. Fix this by reserving a new queue in case the queue id is invalid. While at it, clean up some unreachable code (a condition that is already handled earlier) and remove all the non-DQA comments since non-DQA mode is no longer supported. Fixes: cf961e16620f ("iwlwifi: mvm: support dqa-mode agg on non-shared queue") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: make sure internal station has a valid idAvraham Stern1-1/+2
[ Upstream commit df65c8d1728adee2a52c30287d33da83a8c87480 ] If the driver failed to resume from D3, it is possible that it has no valid aux station. In such case, fw restart will end up in sending station related commands with an invalid station id, which will result in an assert. Fix this by allocating a new station id for the aux station if it does not have a valid id even in the case of fw restart. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: clear tx queue id when unreserving aggregation queueAvraham Stern1-4/+8
[ Upstream commit 4b387906b1c3692bb790388c335515c0cf098a23 ] When a queue is reserved for aggregation, the queue id is assigned to the tid_data. This is fine since iwl_mvm_sta_tx_agg_oper() takes care of allocating the queue before actual tx starts. When the reservation is cancelled (e.g. when the AP declined the aggregation request) the tid_data is not cleared. As a result, following tx for this tid was trying to use an unallocated queue. Fix this by setting the txq_id for the tid to invalid when unreserving the queue. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: Increase session protection time after CSAndrei Otcheretianski3-8/+15
[ Upstream commit 19125cb0591ae63cd4591e3dfe4c22058e748518 ] After switching to a new channel, driver schedules session protection time event in order to hear the beacon on the new channel. The duration of the protection is two beacon intervals. However, since we start to switch slightly before beacon with count 1, in case we don't hear (or AP doesn't transmit) the very first beacon on the new channel the protection ends without hearing any beacon at all. At this stage the switch is not complete, the queues are closed and the interface doesn't have quota yet or TBTT events. As the result, we are stuck forever waiting for iwl_mvm_post_channel_switch() to be called. Fix this by increasing the protection time to be 3 beacon intervals and in addition drop the connection if the time event ends before we got any beacon. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: fix error checking for multi/broadcast staJohannes Berg1-2/+2
[ Upstream commit 75fd4fec3e4c43b131c7c4958adb3ab9f1665513 ] The earlier patch called the station add functions but didn't assign their return value to the ret variable, so that the checks for it were meaningless. Fix that. Found by smatch: .../mac80211.c:2560 iwl_mvm_start_ap_ibss() warn: we tested 'ret' before and it was 'false' .../mac80211.c:2563 iwl_mvm_start_ap_ibss() warn: we tested 'ret' before and it was 'false' Fixes: 3a89411cd31c ("iwlwifi: mvm: fix assert 0x2B00 on older FWs") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: Correctly set IGTK for APBeni Lev1-9/+12
[ Upstream commit e829b17caf96c2da34620e335fb777592990906c ] Currently when an IGTK is set for an AP, it is set as a regular key. Since the cipher is set to CMAC, the STA_KEY_FLG_EXT flag is added to the host command, which causes assert 0x253D on NICs that do not support this. Fixes: 85aeb58cec1a ("iwlwifi: mvm: Enable security on new TX API") Signed-off-by: Beni Lev <beni.lev@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: set the correct tid when we flush the MCAST staEmmanuel Grumbach1-6/+4
[ Upstream commit 334167decf98f01a66c91ea84180c278bc4ad290 ] The tid being used for the queue (cab_queue) for the MCAST station has been changed recently to be 0 (for BE). The flush path still flushed only the special tid (15) which means that the firmware wasn't flushing the right queue and we could get a firmware crash upon remove station if we had an MCAST packet on the ring. The current code that flushes queues for a station only differentiates between internal stations (stations that aren't instantiated in mac80211, like the MCAST station) and the non-internal ones. Internal stations can be either: BCAST (beacons), MCAST (for cab_queue), GENERAL_PURPOSE (p2p dev, and sniffer injection). The internal stations can use different tids. To make the code simpler, just flush all the tids always and add the special internal tid (15) for internal stations. The firmware will know how to handle this even if we hadn't any queue mapped that that tid. Fixes: e340c1a6ef4b ("iwlwifi: mvm: Correctly set the tid for mcast queue") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: Correctly set the tid for mcast queueIlan Peer1-3/+3
[ Upstream commit 6508de0305d560235b366cc2cc98f7bcfb029e92 ] In the scheduler config command, the meaning of tid == 0xf was intended to indicate the configuration is for management frames. However, tid == 0xf was also used for the multicast queue that was meant only for multicast data frames, which resulted with the FW not encrypting multicast data frames. As multicast frames do not have a QoS header, fix this by setting tid == 0, to indicate that this is a data queue and not management one. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: Direct multicast frames to the correct stationIlan Peer1-1/+5
[ Upstream commit 7c305de2b9548ab6b65fce342c78618bbed5db73 ] Multicast frames for NL80211_IFTYPE_AP and NL80211_IFTYPE_ADHOC were directed to the broadcast station, however, as the broadcast station did not have keys configured, these frames were sent unencrypted. Fix this by using the multicast station which is the station for which encryption keys are configured. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: fix "failed to remove key" messageSara Sharon1-1/+2
[ Upstream commit e4f13ad07823b24a1537518d2163bd164292fb10 ] When the GTK is installed, we install it to HW with the station ID of the AP. Mac80211 will try to remove it only after the AP sta is removed, which will result in a failure to remove key since we do not have any station for it. This is a valid situation, but a previous commit removed the early return and added a return with error value, which resulted in an error message that is confusing to users. Remove the error return value. Fixes: 85aeb58cec1a ("iwlwifi: mvm: Enable security on new TX API") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: avoid collecting firmware dump if not loadedShaul Triebitz5-5/+27
[ Upstream commit 8745f12a6600dd9d31122588621d4c8ddb332cd7 ] Trying to collect firmware debug data while firmware is not loaded causes various errors (e.g. failing NIC access). This causes even a bigger issue if at that time the HW radio is off. In that case, when later turning the radio on, the Driver fails to read the HW (registers contain garbage values). (It may be that the CSR_GP_CNTRL_REG_FLAG_RFKILL_WAKE_L1A_EN bit is cleared on faulty NIC access - since the same behavior was seen in HW RFKILL toggling before setting that bit.) Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: fix assert 0x2B00 on older FWsSara Sharon1-10/+35
[ Upstream commit 63dd5d022f4766e6b05ee611124afcc7cbfbb953 ] We should add the multicast station before adding the broadcast station. However, in older FW, the firmware will start beaconing when we add the multicast station, and since the broadcast station is not added at this point so the transmission of the beacon will fail on assert 0x2b00. This is fixed in later firmware, so make the order of addition depend on the TLV. Fixes: 26d6c16bed53 ("iwlwifi: mvm: add multicast station") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: Fix channel switch for count 0 and 1Andrei Otcheretianski2-4/+6
[ Upstream commit 40d53f4a60c9eb10d4fa58066c23ba1af8a59e39 ] It was assumed that apply_time==0 implies immediate scheduling, which is wrong. Instead, the fw expects the START_IMMEDIATELY flag to be set. Otherwise, this resulted in 0x3063 assert. Fix that. While at it rename the T2_V2_START_IMMEDIATELY to TE_V2_START_IMMEDIATELY. Fixes: f5d8f50f271d ("iwlwifi: mvm: Fix channel switch in case of count <= 1") Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: fix TX of CCMP 256Sara Sharon1-2/+5
[ Upstream commit de04d4fbf87b769ab18c480e4f020c53e74bbdd2 ] We don't have enough room in the TX command for a CCMP 256 key, and need to use key from table. Fixes: 3264bf032bd9 ("[BUGFIX] iwlwifi: mvm: Fix CCMP IV setting") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: always init rs with 20mhz bandwidth ratesNaftali Goldstein2-8/+24
[ Upstream commit 6b7a5aea71b342ec0593d23b08383e1f33da4c9a ] In AP mode, when a new station associates, rs is initialized immediately upon association completion, before the phy context is updated with the association parameters, so the sta bandwidth might be wider than the phy context allows. To avoid this issue, always initialize rs with 20mhz bandwidth rate, and after authorization, when the phy context is already up-to-date, re-init rs with the correct bw. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: fix IBSS for devices that support station type APISara Sharon2-13/+14
[ Upstream commit fc07bd8ce19bff9e7479c04077ddb5957d1a27be ] In IBSS, the mac80211 sets the cab_queue to be invalid. However, the multicast station uses it, so we need to override it. A previous patch did it, but it was nested inside the if's and was applied only for legacy FWs that don't support the new station type API, instead of being applied for all paths. In addition, add a missing NL80211_IFTYPE_ADHOC to the initialization of the queues in iwl_mvm_mac_ctxt_init() Fixes: ee48b72211f8 ("iwlwifi: mvm: support ibss in dqa mode") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: fix security bug in PN checkingSara Sharon1-19/+20
[ Upstream commit 5ab2ba931255d8bf03009c06d58dce97de32797c ] A previous patch allowed the same PN for packets originating from the same AMSDU by copying PN only for the last packet in the series. This however is bogus since we cannot assume the last frame will be received on the same queue, and if it is received on a different ueue we will end up not incrementing the PN and possibly let the next packet to have the same PN and pass through. Change the logic instead to driver explicitly indicate for the second sub frame and on to be allowed to have the same PN as the first subframe. Indicate it to mac80211 as well for the fallback queue. Fixes: f1ae02b186d9 ("iwlwifi: mvm: allow same PN for de-aggregated AMSDU") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24iwlwifi: add a bunch of new 9000 PCI IDsLuca Coelho1-2/+155
commit 9e5053ad9d590e095829a8bb07adbbdbd893f0f9 upstream. A lot of new PCI IDs were added for the 9000 series. Add them to the list of supported PCI IDs. Cc: stable@vger.kernel.org # 4.13+ Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24iwlwifi: add shared clock PHY config flag for some devicesLuca Coelho5-19/+91
commit 86a2b2043af79deff5cf000c5a08847faa4f2ee0 upstream. Some devices use a shared clock which is very sensitive to variations and cause trouble in some situations. We need to set a bit in the phy configuration to indicate that to the FW. To make this generic, add a extra_phy_config_flags element to the device configuration and OR it into the phy_cfg before sending it to the firmware. And also create a set of configurations for devices that use shared clocks and need this extra bit to be set. Fixes: c62446d2b028 ("iwlwifi: add new 9460 series PCI IDs") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19iwlwifi: mvm: avoid dumping assert log when device is stoppedSara Sharon1-0/+6
[ Upstream commit 6362ab721ef5c4ecfa01f53ad4137d3d984f0c6c ] We might erroneously get to error dumping code when the device is already stopped. In that case the driver will detect a defective value and will try to reset the HW, assuming it is only a bus issue. The driver than proceeds with the dumping. The result has two side effects: 1. The device won't be stopped again, since the transport status is already stopped, so the device remains powered on while it actually should be stopped. 2. The dump in that case is completely garbaged and useless. Detect and avoid this. It will also make debugging such issues easier. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19iwlwifi: mvm: rs: don't override the rate history in the search cycleEmmanuel Grumbach1-3/+1
[ Upstream commit 992172e3aec19e5b0ea5b757ba40a146b9282d1e ] When we are in a search cycle, we try different combinations of parameters. Those combinations are called 'columns'. When we switch to a new column, we first need to check if this column has a suitable rate, if not, we can't try it. This means we must not erase the statistics we gathered for the previous column until we are sure that we are indeed switching column. The code that tries to switch to a new column first sets a whole bunch of things for the new column, and only then checks that we can find suitable rates in that column. While doing that, the code mistakenly erased the rate statistics. This code was right until struct iwl_scale_tbl_info grew up for TPC. Fix this to make sure we don't erase the rate statistics until we are sure that we can indeed switch to the new column. Note that this bug is really harmless since it causes a change in the behavior only when we can't find any rate in the new column which should really not happen. In the case we do find a suitable we reset the rate statistics a few lines later anyway. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03iwlwifi: fix access to prph when transport is stoppedSara Sharon3-2/+15
[ Upstream commit 0232d2cd7aa8e1b810fe84fb4059a0bd1eabe2ba ] When getting HW rfkill we get stop_device being called from two paths. One path is the IRQ calling stop device, and updating op mode and stack. As a result, cfg80211 is running rfkill sync work that shuts down all devices (second path). In the second path, we eventually get to iwl_mvm_stop_device which calls iwl_fw_dump_conf_clear->iwl_fw_dbg_stop_recording, that access periphery registers. The device may be stopped at this point from the first path, which will result with a failure to access those registers. Simply checking for the trans status is insufficient, since the race will still exist, only minimized. Instead, move the stop from iwl_fw_dump_conf_clear (which is getting called only from stop path) to the transport stop device function, where the access is always safe. This has the added value, of actually stopping dbgc before stopping device even when the stop is initiated from the transport. Fixes: 1efc3843a4ee ("iwlwifi: stop dbgc recording before stopping DMA") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03iwlwifi: mvm: fix the TX queue hang timeout for MONITOR vif typeEmmanuel Grumbach1-0/+2
[ Upstream commit d1b275ffec459c5ae12b5c7086c84175696e5a9f ] The MONITOR type is missing in the interface type switch. Add it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17iwlwifi: pcie: fix DMA memory mapping / unmappingEmmanuel Grumbach3-15/+14
commit 943309d4aad6732b905f3f500e6e17e33c211494 upstream. 22000 devices (previously referenced as A000) can support short transmit queues. This means that we have less DMA descriptors (TFD) for those shorter queues. Previous devices must still have 256 TFDs for each queue even if those 256 TFDs point to fewer buffers. When I introduced support for the short queues for 22000 I broke older devices by assuming that they can also have less TFDs in their queues. This led to several problems: 1) the payload of the commands weren't unmapped properly which caused the SWIOTLB to complain at some point. 2) the hardware could get confused and we get hardware crashes. The corresponding bugzilla entries are: https://bugzilla.kernel.org/show_bug.cgi?id=198201 https://bugzilla.kernel.org/show_bug.cgi?id=198265 Fixes: 4ecab5616023 ("iwlwifi: pcie: support short Tx queues for A000 device family") Reviewed-by: Sharon, Sara <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14iwlwifi: mvm: enable RX offloading with TKIP and WEPDavid Spinadel2-4/+12
commit 9d0fc5a50a0548f8e5d61243e5e5f26d5c405aef upstream. Set the flag that indicates that ICV was stripped on if this option was enabled in the HW. [this is needed for the 9000-series HW to work properly] Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14iwlwifi: mvm: fix packet injectionEmmanuel Grumbach6-15/+49
commit b13f43a48571f0cd0fda271b5046b65f1f268db5 upstream. We need to have a station and a queue for the monitor interface to be able to inject traffic. We used to have this traffic routed to the auxiliary queue, but this queue isn't scheduled for the station we had linked to the monitor vif. Allocate a new queue, link it to the monitor vif's station and make that queue use the BE fifo. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=196715 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14iwlwifi: add new cards for 9260 and 22000 seriesIhab Zhaika1-0/+2
commit 567deca8e72df3ceb6c07c63f8541a4928f64d3b upstream. add 1 PCI ID for 9260 series and 1 for 22000 series. Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 09:32:48 +0300