summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm
AgeCommit message (Collapse)AuthorFilesLines
2024-08-03wifi: iwlwifi: mvm: always unblock EMLSR on ROC endJohannes Berg1-1/+1
[ Upstream commit f9068fe4fd49f9e4409c30546d7e16238942ce62 ] Since we always block EMLSR for ROC, we also need to always unblock it, even if we don't have a P2P device interface. Fix this. Fixes: a1efeb823084 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240625194805.96bbf98b716d.Id5a36954f8ebaa95142fd3d3a7a52bab5363b0bd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: iwlwifi: fix iwl_mvm_get_valid_rx_ant()Daniel Gabay1-2/+2
[ Upstream commit 0091eda01412805e0d2c8025638ac0992102a7fc ] Fix incorrect use of _tx_ valid ant data in the function. Fixes: 4ea1ed1d14d8 ("wifi: iwlwifi: mvm: support set_antenna()") Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618200104.b7c6a320c7dc.I3092eb5275056f2162b9694e583c310c38568b2a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: iwlwifi: mvm: separate non-BSS/ROC EMLSR blockingJohannes Berg3-6/+14
[ Upstream commit 5f1fee9644759d07f3d3a468389c7c18027083d7 ] If non-BSS and remain-on-channel (ROC) blocking were to occur simultaneously, they'd step on each other's toes, unblocking when not yet supported. Disentangle these bits, and ROC doesn't need to use the non_bss_link() function then. Fixes: a1efeb823084 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240605140556.461fcf7b95bb.Id0d21dcb739d426ff15ec068b5df8abaab58884d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: iwlwifi: mvm: fix re-enabling EMLSRMiri Korenblit1-2/+4
[ Upstream commit bd40215b19d255b433a91a8bb8088937e5db4284 ] When EMLSR gets unblocked, the current code checks if the last exit was due to an EXIT reason (as opposed to a BLOCKING one), and if so, it does nothing, as in this case a MLO scan was scheduled to run in 30 seconds. But the code doesn't consider the time that passed from the last exit, so if immediately after the exit a blocker occurred (e.g. non-BSS interface), and lasts for more than 30 seconds, then the MLO scan and the following link selection will decide not to enter EMLSR, and when the unblocking event finally happens, the reason is still set to the EXIT one, so it will do nothing, and we will not have the chance to re-enable EMLSR. Fix this by checking also the time that has passed since the last exit, only if it is less than 30 seconds, we can count on the scheduled MLO scan. Note that clearing the reason itself can't be done since it is needed for the EMLSR prevention mechanism. Fixes: 2f33561ea8f9 ("wifi: iwlwifi: mvm: trigger link selection after exiting EMLSR") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240605140327.58556fc4cfa9.I4c55b3cd9f20b21b37f28258d0fb6842ba413966@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: iwlwifi: mvm: don't skip link selectionMiri Korenblit1-0/+7
[ Upstream commit 46144103ace2863e26f4e911aa45200753b7dbca ] If we exit EMLSR due to a IWL_MVM_ESR_EXIT*, a MLO scan followed by a link selection is scheduled with a delay of 30 seconds. If during that 30 seconds EMLSR was blocked and unblocked (IWL_MVM_ESR_BLOCKED*), we would still want to get the needed data from the MLO scan and select link accordingly, and not return immediately to EMLSR. Fixes: 2f33561ea8f9 ("wifi: iwlwifi: mvm: trigger link selection after exiting EMLSR") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240512152312.caab27a8dd8f.I63f67e213d5e05416f71513a8d914917d59aa44f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-24thermal: core: Allow thermal zones to tell the core to ignore themRafael J. Wysocki1-1/+6
commit e528be3c87be953b73e7826a2d7e4b837cbad39d upstream. The iwlwifi wireless driver registers a thermal zone that is only needed when the network interface handled by it is up and it wants that thermal zone to be effectively ignored by the core otherwise. Before commit a8a261774466 ("thermal: core: Call monitor_thermal_zone() if zone temperature is invalid") that could be achieved by returning an error code from the thermal zone's .get_temp() callback because the core did not really handle errors returned by it almost at all. However, commit a8a261774466 made the core attempt to recover from the situation in which the temperature of a thermal zone cannot be determined due to errors returned by its .get_temp() and is always invalid from the core's perspective. That was done because there are thermal zones in which .get_temp() returns errors to start with due to some difficulties related to the initialization ordering, but then it will start to produce valid temperature values at one point. Unfortunately, the simple approach taken by commit a8a261774466, which is to poll the thermal zone periodically until its .get_temp() callback starts to return valid temperature values, is at odds with the special thermal zone in iwlwifi in which .get_temp() may always return an error because its network interface may always be down. If that happens, every attempt to invoke the thermal zone's .get_temp() callback resulting in an error causes the thermal core to print a dev_warn() message to the kernel log which is super-noisy. To address this problem, make the core handle the case in which .get_temp() returns 0, but the temperature value returned by it is not actually valid, in a special way. Namely, make the core completely ignore the invalid temperature value coming from .get_temp() in that case, which requires folding in update_temperature() into its caller and a few related changes. On the iwlwifi side, modify iwl_mvm_tzone_get_temp() to return 0 and put THERMAL_TEMP_INVALID into the temperature return memory location instead of returning an error when the firmware is not running or it is not of the right type. Also, to clearly separate the handling of invalid temperature values from the thermal zone initialization, introduce a special THERMAL_TEMP_INIT value specifically for the latter purpose. Fixes: a8a261774466 ("thermal: core: Call monitor_thermal_zone() if zone temperature is invalid") Closes: https://lore.kernel.org/linux-pm/20240715044527.GA1544@sol.localdomain/ Reported-by: Eric Biggers <ebiggers@kernel.org> Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=201761 Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Cc: 6.10+ <stable@vger.kernel.org> # 6.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/4950004.31r3eYUQgx@rjwysocki.net [ rjw: Rebased on top of the current mainline ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-03wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereferenceMiri Korenblit3-4/+6
iwl_mvm_get_bss_vif might return a NULL or ERR_PTR. Some of the callers check only the NULL case, and some doesn't check at all. Some of the callers even have a pointer to the mvmvif of the bss vif, so we don't even need to call this function, and can simply get the vif from mvmvif. Do it for those cases, and for the others - properly check if IS_ERR_OR_NULL Fixes: ec0d43d26f2c ("wifi: iwlwifi: mvm: Activate EMLSR based on traffic volume") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240703064027.a661f8c65aac.I45cf09b01af8ee3d55828863958ead741ea43b7f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-03wifi: iwlwifi: mvm: avoid link lookup in statisticsJohannes Berg1-7/+6
We already iterate the link bss_conf/link_info and have the pointer, or know that deflink/bss_conf is used, so avoid an extra lookup and just pass the pointer. This may also avoid a crash when this is processed during restart, where the FW to link conf array (link_id_to_link_conf) may be NULLed out. Fixes: c1e458b987f2 ("wifi: iwlwifi: mvm: Move beacon filtering to be per link") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240703064026.346a6ef67a86.Iba5d65d728ca9f58518c88d029496c1250670544@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-03wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILLEmmanuel Grumbach2-8/+4
Since we now want to sync the queues even when we're in RFKILL, we shouldn't wake up the wait queue since we still expect to get all the notifications from the firmware. Fixes: 4d08c0b3357c ("wifi: iwlwifi: mvm: handle BA session teardown in RF-kill") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240703064027.be7a9dbeacde.I5586cb3ca8d6e44f79d819a48a0c22351ff720c9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-03wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCKDaniel Gabay1-1/+1
The WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK should be set based on the WOWLAN_KEK_KCK_MATERIAL command version. Currently, the command version in the firmware has advanced to 4, which prevents the flag from being set correctly, fix that. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240703064026.a0f162108575.If1a9785727d2a1b0197a396680965df1b53d4096@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: iwlwifi: scan: correctly check if PSC listen period is neededAyala Beker1-1/+1
The flags variable is incorrectly checked while it is still cleared and has not been assigned any value yet. Fix it. Fixes: a615323f7f90 ("wifi: iwlwifi: mvm: always apply 6 GHz probe limitations") Signed-off-by: Ayala Beker <ayala.beker@intel.com> Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240605140556.291c33f9a283.Id651fe69828aebce177b49b2316c5780906f1b37@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: iwlwifi: mvm: fix ROC version checkShaul Triebitz1-1/+1
For using the ROC command, check that the ROC version is *greater or equal* to 3, rather than *equal* to 3. The ROC version was added to the TLV starting from version 3. Fixes: 67ac248e4db0 ("wifi: iwlwifi: mvm: implement ROC version 3") Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240605140327.93d86cd188ad.Iceadef5a2f3cfa4a127e94a0405eba8342ec89c1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: iwlwifi: mvm: unlock mvm mutexShaul Triebitz1-0/+2
Unlock the mvm mutex before returning from a function with the mutex locked. Fixes: a1efeb823084 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active") Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240605140327.96cb956db4af.Ib468cbad38959910977b5581f6111ab0afae9880@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: don't read past the mfuart notifcationEmmanuel Grumbach1-10/+0
In case the firmware sends a notification that claims it has more data than it has, we will read past that was allocated for the notification. Remove the print of the buffer, we won't see it by default. If needed, we can see the content with tracing. This was reported by KFENCE. Fixes: bdccdb854f2f ("iwlwifi: mvm: support MFUART dump in case of MFUART assert") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.ba82a01a559e.Ia91dd20f5e1ca1ad380b95e68aebf2794f553d9b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: Fix scan abort handling with HW rfkillIlan Peer1-1/+2
When HW rfkill is toggled to disable the RF, the flow to stop scan is called. When trying to send the command to abort the scan, since HW rfkill is toggled, the command is not sent due to rfkill being asserted, and -ERFKILL is returned from iwl_trans_send_cmd(), but this is silently ignored in iwl_mvm_send_cmd() and thus the scan abort flow continues to wait for scan complete notification and fails. Since it fails, the UID to type mapping is not cleared, and thus a warning is later fired when trying to stop the interface. To fix this, modify the UMAC scan abort flow to force sending the scan abort command even when in rfkill, so stop the FW from accessing the radio etc. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.8cbe2f8c1a97.Iffe235c12a919dafec88eef399eb1f7bae2c5bdb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: check n_ssids before accessing the ssidsMiri Korenblit1-2/+2
In some versions of cfg80211, the ssids poinet might be a valid one even though n_ssids is 0. Accessing the pointer in this case will cuase an out-of-bound access. Fix this by checking n_ssids first. Fixes: c1a7515393e4 ("iwlwifi: mvm: add adaptive dwell support") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240513132416.6e4d1762bf0d.I5a0e6cc8f02050a766db704d15594c61fe583d45@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: properly set 6 GHz channel direct probe optionAyala Beker1-1/+4
Ensure that the 6 GHz channel is configured with a valid direct BSSID, avoiding any invalid or multicast BSSID addresses. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.91a631a0fe60.I2ea2616af9b8a2eaf959b156c69cf65a2f1204d4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: handle BA session teardown in RF-killJohannes Berg3-6/+11
When entering RF-kill, mac80211 tears down BA sessions, but due to RF-kill the commands aren't sent to the device. As a result, there can be frames pending on the reorder buffer or perhaps even received while doing so, leading to warnings. Avoid the warnings by doing the BA session teardown normally even in RF-kill, which also requires queue sync. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.0762cd80fb3d.I43c5877f3b546159b2db4f36d6d956b333c41cf0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: Handle BIGTK cipher in kek_kck cmdYedidya Benshimol1-2/+11
The BIGTK cipher field was added to the kek_kck_material_cmd but wasn't assigned. Fix that by differentiating between the IGTK/BIGTK keys and assign the ciphers fields accordingly. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.7fd0b22b7267.Ie9b581652b74bd7806980364d59e1b2e78e682c0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: remove stale STA link data during restartBenjamin Berg3-5/+47
If pre-recovery mac80211 tried to disable a link but this disablement failed, then there might be a mismatch between mac80211 assuming the link has been disabled and the driver still having the data around. During recover itself, that is not a problem, but should the link be activated again at a later point, iwlwifi will refuse the activation as it detects the inconsistent state. Solve this corner-case by iterating the station in the restart cleanup handler. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.d2fd60338055.I840d4fdce5fd49fe69896d928b071067e3730259@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: set properly mac headerMordechay Goodstein1-1/+4
In the driver we only use skb_put* for adding data to the skb, hence data never moves and skb_reset_mac_haeder would set mac_header to the first time data was added and not to mac80211 header, fix this my using the actual len of bytes added for setting the mac header. Fixes: 3f7a9d577d47 ("wifi: iwlwifi: mvm: simplify by using SKB MAC header pointer") Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.12f2de2909c3.I72a819b96f2fe55bde192a8fd31a4b96c301aa73@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: revert gen2 TX A-MPDU size to 64Johannes Berg1-7/+2
We don't actually support >64 even for HE devices, so revert back to 64. This fixes an issue where the session is refused because the queue is configured differently from the actual session later. Fixes: 514c30696fbc ("iwlwifi: add support for IEEE802.11ax") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.52f7b4cf83aa.If47e43adddf7fe250ed7f5571fbb35d8221c7c47@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: d3: fix WoWLAN command version lookupYedidya Benshimol1-1/+2
After moving from commands to notificaitons in the d3 resume flow, removing the WOWLAN_GET_STATUSES and REPLY_OFFLOADS_QUERY_CMD causes the return of the default value when looking up their version. Returning zero here results in the driver sending the not supported NON_QOS_TX_COUNTER_CMD. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.8cabfd580614.If3a0db9851f56041f8f5360959354abd5379224a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: fix a crash on 7265Emmanuel Grumbach1-2/+2
Since IWL_FW_CMD_VER_UNKNOWN = 99, then my change to consider cmd_ver >= 7 instead of cmd_ver = 7 included also firmwares that don't advertise the command version at all. This made us send a command with a bad size and because of that, the firmware hit a BAD_COMMAND immediately after handling the REDUCE_TX_POWER_CMD command. Fixes: 8f892e225f41 ("wifi: iwlwifi: mvm: support iwl_dev_tx_power_cmd_v8") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512072733.eb20ff5050d3.Ie4fc6f5496cd296fd6ff20d15e98676f28a3cccd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: always set the TWT IE offsetShaul Triebitz3-1/+11
In beacon template version 14, make sure to always set the TWT IE offset before sending the beacon template command, also in the debugfs inject_beacon_ie path. If the TWT IE does not exist, the offset will be set to zero. Fixes: bf0212fd8faa ("wifi: iwlwifi: mvm: add beacon template version 14") Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512152312.eb27175c345a.If30ef24aba10fe47fd42a7a9703eb8903035e294@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: don't initialize csa_work twiceMiri Korenblit1-2/+0
The initialization of this worker moved to iwl_mvm_mac_init_mvmvif but we removed only from the pre-MLD version of the add_interface callback. Remove it also from the MLD version. Fixes: 0bcc2155983e ("wifi: iwlwifi: mvm: init vif works only once") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240512152312.4f15b41604f0.Iec912158e5a706175531d3736d77d25adf02fba4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-18Merge tag 'kbuild-v6.10' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Avoid 'constexpr', which is a keyword in C23 - Allow 'dtbs_check' and 'dt_compatible_check' run independently of 'dt_binding_check' - Fix weak references to avoid GOT entries in position-independent code generation - Convert the last use of 'optional' property in arch/sh/Kconfig - Remove support for the 'optional' property in Kconfig - Remove support for Clang's ThinLTO caching, which does not work with the .incbin directive - Change the semantics of $(src) so it always points to the source directory, which fixes Makefile inconsistencies between upstream and downstream - Fix 'make tar-pkg' for RISC-V to produce a consistent package - Provide reasonable default coverage for objtool, sanitizers, and profilers - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc. - Remove the last use of tristate choice in drivers/rapidio/Kconfig - Various cleanups and fixes in Kconfig * tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits) kconfig: use sym_get_choice_menu() in sym_check_prop() rapidio: remove choice for enumeration kconfig: lxdialog: remove initialization with A_NORMAL kconfig: m/nconf: merge two item_add_str() calls kconfig: m/nconf: remove dead code to display value of bool choice kconfig: m/nconf: remove dead code to display children of choice members kconfig: gconf: show checkbox for choice correctly kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal Makefile: remove redundant tool coverage variables kbuild: provide reasonable defaults for tool coverage modules: Drop the .export_symbol section from the final modules kconfig: use menu_list_for_each_sym() in sym_check_choice_deps() kconfig: use sym_get_choice_menu() in conf_write_defconfig() kconfig: add sym_get_choice_menu() helper kconfig: turn defaults and additional prompt for choice members into error kconfig: turn missing prompt for choice members into error kconfig: turn conf_choice() into void function kconfig: use linked list in sym_set_changed() kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED kconfig: gconf: remove debug code ...
2024-05-09kbuild: use $(src) instead of $(srctree)/$(src) for source directoryMasahiro Yamada1-1/+1
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for checked-in source files. It is merely a convention without any functional difference. In fact, $(obj) and $(src) are exactly the same, as defined in scripts/Makefile.build: src := $(obj) When the kernel is built in a separate output directory, $(src) does not accurately reflect the source directory location. While Kbuild resolves this discrepancy by specifying VPATH=$(srctree) to search for source files, it does not cover all cases. For example, when adding a header search path for local headers, -I$(srctree)/$(src) is typically passed to the compiler. This introduces inconsistency between upstream and downstream Makefiles because $(src) is used instead of $(srctree)/$(src) for the latter. To address this inconsistency, this commit changes the semantics of $(src) so that it always points to the directory in the source tree. Going forward, the variables used in Makefiles will have the following meanings: $(obj) - directory in the object tree $(src) - directory in the source tree (changed by this commit) $(objtree) - the top of the kernel object tree $(srctree) - the top of the kernel source tree Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced with $(src). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2024-05-06wifi: iwlwifi: mvm: don't request statistics in restartMiri Korenblit1-0/+7
During restart mac80211 notifies the driver about the association, (if we was associated before the restart) which causes the driver to request statistics from the FW. This causes to an immediate exit from EMLSR after the restart is done, when the statistics notif is handled. (too low TPT). There is no point in requesting statistics wnyway, since the FW just started and don't have any. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240506095953.16638dec9f7b.I093514312179bae566ad8d73ffb0355c6eee288a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: exit EMLSR if secondary link is not usedMiri Korenblit3-2/+40
Exit EMLSR mode if the secondary link is not used enough for Rx/Tx Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240506095953.99ad1d71e9b9.Ide825433488ec809773efdc36937e3089d0012df@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: add beacon template version 14striebit1-0/+7
In version 14 tim_size became the offset of the broadcast TWT IE. Signed-off-by: striebit <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.76957de93810.I2c718b0d648f2559fe1337df39915c5e772856bc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: align UATS naming with firmwareJohannes Berg1-4/+5
The firmware has different names for this, which is confusing as even the convention of having the firmware name in a comment after the struct definition wasn't met here. Fix the naming, but keep UATS in some of it since that's the BIOS name. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.b0dfe17d5f44.I8f5f5a831c7b934ce3140f838315827c018103bb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: record and return channel survey informationBenjamin Berg6-8/+430
While doing a passive scan, the firmware will report per-channel survey information. This information is primarily useful for hostapd when doing an ACS (Automatic Channel Selection). Collect this information and add it to the result set when getting the survey information. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.9287591a5999.I54a3f9f6480d3694e67eea1cb4f5853beace2780@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: add the firmware API for channel surveyBenjamin Berg1-0/+1
When requested, the firmware can return per-channel survey information generally used for ACS (automatic channel selection). Add the API for this, which consists of a flag and a new channel survey notification. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.1facde532676.I3864ac4bc0fecb7fd5136e85c07585ab7100234b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Fix race in scan completionIlan Peer4-29/+55
The move of the scan complete notification handling to the wiphy worker introduced a race between scan complete notification and scan abort: - The wiphy lock is held, e.g., for rfkill handling etc. - Scan complete notification is received but not handled yet. - Scan abort is triggered, and scan abort is sent to the FW. Once the scan abort command is sent successfully, the flow synchronously waits for the scan complete notification. However, as the scan complete notification was already received but not processed yet, this hangs for a second and continues leaving the scan status in an inconsistent state. - Once scan complete handling is started (when the wiphy lock is not held) since the scan status is not an inconsistent state, a warning is issued and the scan complete notification is not handled. To fix this issue, switch back the scan complete notification to be asynchronously handling, and only move the link selection logic to a worker (which was the original reason for the move to use wiphy lock). While at it, refactor some prints to improve debug data. Fixes: 07bf5297d392 ("wifi: iwlwifi: mvm: Implement new link selection algorithm") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.1f484a86324b.I63ed445a47f144546948c74ae6df85587fdb4ce3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Add a print for invalid link pair due to bandwidthYedidya Benshimol1-11/+20
When validating a link pair for EMLSR, add a print for invalid link pair due to bandwidth Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.9e57ad898cf4.Id8edfd5e3774ea6475d5f4178ab7ea75a870ef95@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: add a debugfs for reading EMLSR blocking reasonsYedidya Benshimol3-5/+40
Add a reading for all active EMLSR blocking reasons for testing purposes. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.6d494a335e81.Ic0fa6a9636e3c1a3b1420e85e704a19d4a56e8d9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Add active EMLSR blocking reasons printsYedidya Benshimol1-12/+24
Upon adding/removing an EMLSR blocking reason add to the print the EMLSR disabling mask Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.1e34fe2c3e51.Ia7db0392d81818ceb70a7b199d3f5fa8a4ad198d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: fix primary link settingMiri Korenblit1-1/+1
mvmvif::primary link holds the ID and not a bitmap. Fix this Fixes: 07bf5297d392 ("wifi: iwlwifi: mvm: Implement new link selection algorithm") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240506095953.779bf6949053.Ia9297991ff2fdc82ae7c730e0069e2dd6e5f2902@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: use already determined cmd_idJohannes Berg1-7/+2
In iwl_mvm_rs_fw_rate_init() we have a variable cmd_id that holds the command ID, so we can just use that instead of the various calculations of it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.f894ede03b26.I18f03c272b1c0807767f2713f3ffbb2941c57d9b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: don't reset link selection during restartJohannes Berg1-3/+6
After restart, we might want to end up with the same config as before, even for multi-link/EMLSR. Therefore, don't reset the stored link selection result in that case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.e81db303f1dc.Ie8267082f623d14376a2052d222e18da6545f34b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: Print EMLSR states nameDaniel Gabay2-9/+50
This is useful for debug instead of looking for the hex value. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.f3509cf652f2.Ic086b6b2132ffe249b3c4bdd24c673ce7fd1b614@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is activeYedidya Benshimol7-19/+133
When there's an active link in a non-station vif, the station vif is not allowed to enter EMLSR Note that blocking EMLSR by calling iwl_mvm_block_esr() we will schedule an exit from EMLSR worker, but the worker cannot run before the activation of the non-BSS link, as ieee80211_remain_on_channel already holds the wiphy mutex. Handle that by explicitly calling ieee80211_set_active_links() to leave EMLSR, and then doing iwl_mvm_block_esr() only for consistency and to avoid re-entering it before ready. Note that a call to ieee80211_set_active_links requires to release the mvm mutex, but that's ok since we still hold the wiphy lock. The only thing that might race here is the ESR_MODE_NOTIF, so this changes its handler to run under the wiphy lock. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.916193759f8a.Idf3a3caf5cdc3e69c81710b7ceb57e87f2de87e4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: fix typo in debug printMiri Korenblit1-2/+2
Change EMSLR to EMLSR Fixes: 6cf7df9f013f ("wifi: iwlwifi: mvm: Add helper functions to update EMLSR status") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.db629302bfdc.I135e28b89fab3b614ad8758c0305834934f8c0af@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: exit EMLSR when CSA happensJohannes Berg5-26/+115
If CSA is happening, then exit EMLSR to keep the better link, which is the primary link unless that's doing the CSA with quiet. This is done because we can't transmit the OMN frame on a quiet link, but want to exit EMLSR during CSA for better beacon reception, so we can follow the switch accurately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.3ffff9577f08.I2620971fa5aef789e0d4a588def4c2621e8bed5b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Disable/enable EMLSR due to link's bandwidth/bandYedidya Benshimol4-35/+63
Enable EMLSR when bandwidth settings meet the criteria in both band and width, otherwise disable. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.4e473d4f7f5c.I3adf5619b60bfba8af0cd7eae9dac947419603b6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: avoid always prefering single-linkMiri Korenblit1-2/+2
The new link selection algorithm uses defaults values for BSS load if the BSS Load element was not published by the AP. For 6 GHz, that value is 0. So if the best link is 6 GHz, the EMLSR grade to always be equal to the grade of the best link, and then the best link grade is getting a bonus of 10 percent, meaning that we will never activate EMLSR. Change the logic to not give a bonus for the best link. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.4614e6891dbd.Ie40eae0dd99d82ba60dea5b6dbcd42dcdf16b90d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: trigger link selection upon TTLM start/endMiri Korenblit1-0/+5
When non default TTLM is applied, mac80211 may force us to use a specific link (For example, if the only active link becomes a dormant link, mac80211 will pick the first usable link and set it as active). When default TTLM is applied, we have new usable links that we might want to select. Therefore, trigger MLO scan and link selection upon change in TTLM. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Link: https://msgid.link/20240505091420.ed2b386566a8.I0168e61da86b2027633743aaf5d97e483991f0dc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: consider FWs recommendation for EMLSRMiri Korenblit3-0/+29
FW sends a notification indicating whether activating EMLSR mode is recommended or not. Support the notification and enter EMLSR only if recommended. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.2fd3387882eb.I7a8a5b24658744ed732bfc03b1872c9298483d62@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Activate EMLSR based on traffic volumeMiri Korenblit10-8/+244
Adjust EMLSR activation to account for traffic levels. By tracking the number of RX/TX MPDUs, EMLSR will be activated only when traffic volume meets the required threshold. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.9480f99ac8fc.If9eb946e929a39e10fe5f4638bc8bc3f8976edf1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-04 20:05:38 +0300