summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm
AgeCommit message (Collapse)AuthorFilesLines
2024-09-04wifi: iwlwifi: abort scan when rfkill on but device enabledMiri Korenblit1-1/+1
[ Upstream commit 3c6a0b1f0add72e7f522bc9145222b86d0a7712a ] In RFKILL we first set the RFKILL bit, then we abort scan (if one exists) by waiting for the notification from FW and notifying mac80211. And then we stop the device. But in case we have a scan ongoing in the period of time between rfkill on and before the device is stopped - we will not wait for the FW notification because of the iwl_mvm_is_radio_killed() condition, and then the scan_status and uid_status are misconfigured, (scan_status is cleared but uid_status not) and when the notification suddenly arrives (before stopping the device) we will get into the assert about scan_status and uid_status mismatch. Fix this by waiting for FW notif when rfkill is on but the device isn't disabled yet. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.c43b69aa2c77.Icc7b5efb47974d6f499156ff7510b786e177993b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-05wifi: iwlwifi: mvm: don't read past the mfuart notifcationEmmanuel Grumbach1-10/+0
[ Upstream commit 4bb95f4535489ed830cf9b34b0a891e384d1aee4 ] In case the firmware sends a notification that claims it has more data than it has, we will read past that was allocated for the notification. Remove the print of the buffer, we won't see it by default. If needed, we can see the content with tracing. This was reported by KFENCE. Fixes: bdccdb854f2f ("iwlwifi: mvm: support MFUART dump in case of MFUART assert") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.ba82a01a559e.Ia91dd20f5e1ca1ad380b95e68aebf2794f553d9b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-05wifi: iwlwifi: mvm: check n_ssids before accessing the ssidsMiri Korenblit1-2/+2
[ Upstream commit 60d62757df30b74bf397a2847a6db7385c6ee281 ] In some versions of cfg80211, the ssids poinet might be a valid one even though n_ssids is 0. Accessing the pointer in this case will cuase an out-of-bound access. Fix this by checking n_ssids first. Fixes: c1a7515393e4 ("iwlwifi: mvm: add adaptive dwell support") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240513132416.6e4d1762bf0d.I5a0e6cc8f02050a766db704d15594c61fe583d45@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-05wifi: iwlwifi: mvm: revert gen2 TX A-MPDU size to 64Johannes Berg1-7/+2
[ Upstream commit 4a7aace2899711592327463c1a29ffee44fcc66e ] We don't actually support >64 even for HE devices, so revert back to 64. This fixes an issue where the session is refused because the queue is configured differently from the actual session later. Fixes: 514c30696fbc ("iwlwifi: add support for IEEE802.11ax") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.52f7b4cf83aa.If47e43adddf7fe250ed7f5571fbb35d8221c7c47@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02wifi: iwlwifi: mvm: remove old PASN station when adding a new oneAvraham Stern1-0/+2
[ Upstream commit dbfff5bf9292714f02ace002fea8ce6599ea1145 ] If a PASN station is added, and an old PASN station already exists for the same mac address, remove the old station before adding the new one. Keeping the old station caueses old security context to be used in measurements. Fixes: 0739a7d70e00 ("iwlwifi: mvm: initiator: add option for adding a PASN responder") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240415114847.ef3544a416f2.I4e8c7c8ca22737f4f908ae5cd4fc0b920c703dd3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01iwlwifi: mvm: write queue_sync_state only for syncJohannes Berg1-2/+3
[ Upstream commit 5f8a3561ea8bf75ad52cb16dafe69dd550fa542e ] We use mvm->queue_sync_state to wait for synchronous queue sync messages, but if an async one happens inbetween we shouldn't clear mvm->queue_sync_state after sending the async one, that can run concurrently (at least from the CPU POV) with another synchronous queue sync. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.d11c9bcdb4aa.I0772171dbaec87433a11513e9586d98b5d920b5f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01iwlwifi: mvm: do more useful queue sync accountingJohannes Berg4-10/+15
[ Upstream commit 2f7a04c7b03b7fd63b7618e29295fc25732faac1 ] We're currently doing accounting on the queue sync with an atomic variable that counts down the number of remaining notifications that we still need. As we've been hitting issues in this area, modify this to track a bitmap of queues, not just the number of queues, and print out the remaining bitmap in the warning. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.0a3fa177cd6b.I7c69ff999419368266279ec27dd618eb450908b3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Stable-dep-of: 5f8a3561ea8b ("iwlwifi: mvm: write queue_sync_state only for sync") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28wifi: iwlwifi: Use FW rate for non-data framesMiri Korenblit1-5/+9
[ Upstream commit 499d02790495958506a64f37ceda7e97345a50a8 ] Currently we are setting the rate in the tx cmd for mgmt frames (e.g. during connection establishment). This was problematic when sending mgmt frames in eSR mode, as we don't know what link this frame will be sent on (This is decided by the FW), so we don't know what is the lowest rate. Fix this by not setting the rate in tx cmd and rely on FW to choose the right one. Set rate only for injected frames with fixed rate, or when no sta is given. Also set for important frames (EAPOL etc.) the High Priority flag. Fixes: 055b22e770dd ("iwlwifi: mvm: Set Tx rate and flags when there is not station") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230913145231.6c7e59620ee0.I6eaed3ccdd6dd62b9e664facc484081fc5275843@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27wifi: iwlwifi: mvm: avoid baid size integer overflowJohannes Berg1-1/+1
[ Upstream commit 1a528ab1da324d078ec60283c34c17848580df24 ] Roee reported various hard-to-debug crashes with pings in EHT aggregation scenarios. Enabling KASAN showed that we access the BAID allocation out of bounds, and looking at the code a bit shows that since the reorder buffer entry (struct iwl_mvm_reorder_buf_entry) is 128 bytes if debug such as lockdep is enabled, then staring from an agg size 512 we overflow the size calculation, and allocate a much smaller structure than we should, causing slab corruption once we initialize this. Fix this by simply using u32 instead of u16. Reported-by: Roee Goldfiner <roee.h.goldfiner@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.f428c856030d.I2c2bb808e945adb71bc15f5b2bac2d8957ea90eb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27wifi: iwlwifi: pull from TXQs with softirqs disabledJohannes Berg1-1/+4
[ Upstream commit 96fb6f47db24a712d650b0a9b9074873f273fb0e ] In mac80211, it's required that we pull from TXQs by calling ieee80211_tx_dequeue() only with softirqs disabled. However, in iwl_mvm_queue_state_change() we're often called with them enabled, e.g. from flush if anything was flushed, triggering a mac80211 warning. Fix that by disabling the softirqs across the TX call. Fixes: cfbc6c4c5b91 ("iwlwifi: mvm: support mac80211 TXQs model") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.0feef7fa81db.I4dd62542d955b40dd8f0af34fa4accb9d0d17c7e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-30wifi: iwlwifi: mvm: don't trust firmware n_channelsJohannes Berg1-0/+10
[ Upstream commit 682b6dc29d98e857e6ca4bbc077c7dc2899b7473 ] If the firmware sends us a corrupted MCC response with n_channels much larger than the command response can be, we might copy far too much (uninitialized) memory and even crash if the n_channels is large enough to make it run out of the one page allocated for the FW response. Fix that by checking the lengths. Doing a < comparison would be sufficient, but the firmware should be doing it correctly, so check more strictly. Fixes: dcaf9f5ecb6f ("iwlwifi: mvm: add MCC update FW API") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230514120631.d7b233139eb4.I51fd319df8e9d41881fc8450e83d78049518a79a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17wifi: iwlwifi: mvm: check firmware response sizeJohannes Berg1-0/+10
[ Upstream commit 13513cec93ac9902d0b896976d8bab3758a9881c ] Check the firmware response size for responses to the memory read/write command in debugfs before using it. Fixes: 2b55f43f8e47 ("iwlwifi: mvm: Add mem debugfs entry") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230417113648.0d56fcaf68ee.I70e9571f3ed7263929b04f8fabad23c9b999e4ea@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14wifi: iwlwifi: mvm: fix double free on tx path.Ben Greear1-1/+11
[ Upstream commit 0473cbae2137b963bd0eaa74336131cb1d3bc6c3 ] We see kernel crashes and lockups and KASAN errors related to ax210 firmware crashes. One of the KASAN dumps pointed at the tx path, and it appears there is indeed a way to double-free an skb. If iwl_mvm_tx_skb_sta returns non-zero, then the 'skb' sent into the method will be freed. But, in case where we build TSO skb buffer, the skb may also be freed in error case. So, return 0 in that particular error case and do cleanup manually. BUG: KASAN: use-after-free in __list_del_entry_valid+0x12/0x90 iwlwifi 0000:06:00.0: 0x00000000 | tsf hi Read of size 8 at addr ffff88813cfa4ba0 by task btserver/9650 CPU: 4 PID: 9650 Comm: btserver Tainted: G W 5.19.8+ #5 iwlwifi 0000:06:00.0: 0x00000000 | time gp1 Hardware name: Default string Default string/SKYBAY, BIOS 5.12 02/19/2019 Call Trace: <TASK> dump_stack_lvl+0x55/0x6d print_report.cold.12+0xf2/0x684 iwlwifi 0000:06:00.0: 0x1D0915A8 | time gp2 ? __list_del_entry_valid+0x12/0x90 kasan_report+0x8b/0x180 iwlwifi 0000:06:00.0: 0x00000001 | uCode revision type ? __list_del_entry_valid+0x12/0x90 __list_del_entry_valid+0x12/0x90 iwlwifi 0000:06:00.0: 0x00000048 | uCode version major tcp_update_skb_after_send+0x5d/0x170 __tcp_transmit_skb+0xb61/0x15c0 iwlwifi 0000:06:00.0: 0xDAA05125 | uCode version minor ? __tcp_select_window+0x490/0x490 iwlwifi 0000:06:00.0: 0x00000420 | hw version ? trace_kmalloc_node+0x29/0xd0 ? __kmalloc_node_track_caller+0x12a/0x260 ? memset+0x1f/0x40 ? __build_skb_around+0x125/0x150 ? __alloc_skb+0x1d4/0x220 ? skb_zerocopy_clone+0x55/0x230 iwlwifi 0000:06:00.0: 0x00489002 | board version ? kmalloc_reserve+0x80/0x80 ? rcu_read_lock_bh_held+0x60/0xb0 tcp_write_xmit+0x3f1/0x24d0 iwlwifi 0000:06:00.0: 0x034E001C | hcmd ? __check_object_size+0x180/0x350 iwlwifi 0000:06:00.0: 0x24020000 | isr0 tcp_sendmsg_locked+0x8a9/0x1520 iwlwifi 0000:06:00.0: 0x01400000 | isr1 ? tcp_sendpage+0x50/0x50 iwlwifi 0000:06:00.0: 0x48F0000A | isr2 ? lock_release+0xb9/0x400 ? tcp_sendmsg+0x14/0x40 iwlwifi 0000:06:00.0: 0x00C3080C | isr3 ? lock_downgrade+0x390/0x390 ? do_raw_spin_lock+0x114/0x1d0 iwlwifi 0000:06:00.0: 0x00200000 | isr4 ? rwlock_bug.part.2+0x50/0x50 iwlwifi 0000:06:00.0: 0x034A001C | last cmd Id ? rwlock_bug.part.2+0x50/0x50 ? lockdep_hardirqs_on_prepare+0xe/0x200 iwlwifi 0000:06:00.0: 0x0000C2F0 | wait_event ? __local_bh_enable_ip+0x87/0xe0 ? inet_send_prepare+0x220/0x220 iwlwifi 0000:06:00.0: 0x000000C4 | l2p_control tcp_sendmsg+0x22/0x40 sock_sendmsg+0x5f/0x70 iwlwifi 0000:06:00.0: 0x00010034 | l2p_duration __sys_sendto+0x19d/0x250 iwlwifi 0000:06:00.0: 0x00000007 | l2p_mhvalid ? __ia32_sys_getpeername+0x40/0x40 iwlwifi 0000:06:00.0: 0x00000000 | l2p_addr_match ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_sched_held+0x5a/0xd0 ? lock_release+0xb9/0x400 ? lock_downgrade+0x390/0x390 ? ktime_get+0x64/0x130 ? ktime_get+0x8d/0x130 ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? rcu_read_lock_bh_held+0xb0/0xb0 __x64_sys_sendto+0x6f/0x80 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f1d126e4531 Code: 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 35 80 0c 00 41 89 ca 8b 00 85 c0 75 1c 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 67 c3 66 0f 1f 44 00 00 55 48 83 ec 20 48 89 RSP: 002b:00007ffe21a679d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000000000000ffdc RCX: 00007f1d126e4531 RDX: 0000000000010000 RSI: 000000000374acf0 RDI: 0000000000000014 RBP: 00007ffe21a67ac0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000010 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 </TASK> Allocated by task 9650: kasan_save_stack+0x1c/0x40 __kasan_slab_alloc+0x6d/0x90 kmem_cache_alloc_node+0xf3/0x2b0 __alloc_skb+0x191/0x220 tcp_stream_alloc_skb+0x3f/0x330 tcp_sendmsg_locked+0x67c/0x1520 tcp_sendmsg+0x22/0x40 sock_sendmsg+0x5f/0x70 __sys_sendto+0x19d/0x250 __x64_sys_sendto+0x6f/0x80 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 9650: kasan_save_stack+0x1c/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0x102/0x170 kmem_cache_free+0xc8/0x3e0 iwl_mvm_mac_itxq_xmit+0x124/0x270 [iwlmvm] ieee80211_queue_skb+0x874/0xd10 [mac80211] ieee80211_xmit_fast+0xf80/0x1180 [mac80211] __ieee80211_subif_start_xmit+0x287/0x680 [mac80211] ieee80211_subif_start_xmit+0xcd/0x730 [mac80211] dev_hard_start_xmit+0xf6/0x420 __dev_queue_xmit+0x165b/0x1b50 ip_finish_output2+0x66e/0xfb0 __ip_finish_output+0x487/0x6d0 ip_output+0x11c/0x350 __ip_queue_xmit+0x36b/0x9d0 __tcp_transmit_skb+0xb35/0x15c0 tcp_write_xmit+0x3f1/0x24d0 tcp_sendmsg_locked+0x8a9/0x1520 tcp_sendmsg+0x22/0x40 sock_sendmsg+0x5f/0x70 __sys_sendto+0x19d/0x250 __x64_sys_sendto+0x6f/0x80 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The buggy address belongs to the object at ffff88813cfa4b40 which belongs to the cache skbuff_fclone_cache of size 472 The buggy address is located 96 bytes inside of 472-byte region [ffff88813cfa4b40, ffff88813cfa4d18) The buggy address belongs to the physical page: page:ffffea0004f3e900 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88813cfa6c40 pfn:0x13cfa4 head:ffffea0004f3e900 order:2 compound_mapcount:0 compound_pincount:0 flags: 0x5fff8000010200(slab|head|node=0|zone=2|lastcpupid=0x3fff) raw: 005fff8000010200 ffffea0004656b08 ffffea0008e8cf08 ffff8881081a5240 raw: ffff88813cfa6c40 0000000000170015 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88813cfa4a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88813cfa4b00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb >ffff88813cfa4b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88813cfa4c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88813cfa4c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 08f7d8b69aaf ("iwlwifi: mvm: bring back mvm GSO code") Link: https://lore.kernel.org/linux-wireless/20220928193057.16132-1-greearb@candelatech.com/ Tested-by: Amol Jawale <amol.jawale@candelatech.com> Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20221123225313.21b1ee31d666.I3b3ba184433dd2a544d91eeeda29b467021824ae@changeid Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queueJose Ignacio Tornos Martinez1-0/+1
[ Upstream commit 14a3aacf517a9de725dd3219dbbcf741e31763c4 ] After successfull station association, if station queues are disabled for some reason, the related lists are not emptied. So if some new element is added to the list in iwl_mvm_mac_wake_tx_queue, it can match with the old one and produce a BUG like this: [ 46.535263] list_add corruption. prev->next should be next (ffff94c1c318a360), but was 0000000000000000. (prev=ffff94c1d02d3388). [ 46.535283] ------------[ cut here ]------------ [ 46.535284] kernel BUG at lib/list_debug.c:26! [ 46.535290] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 46.585304] CPU: 0 PID: 623 Comm: wpa_supplicant Not tainted 5.19.0-rc3+ #1 [ 46.592380] Hardware name: Dell Inc. Inspiron 660s/0478VN , BIOS A07 08/24/2012 [ 46.600336] RIP: 0010:__list_add_valid.cold+0x3d/0x3f [ 46.605475] Code: f2 4c 89 c1 48 89 fe 48 c7 c7 c8 40 67 93 e8 20 cc fd ff 0f 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 70 40 67 93 e8 09 cc fd ff <0f> 0b 48 89 fe 48 c7 c7 00 41 67 93 e8 f8 cb fd ff 0f 0b 48 89 d1 [ 46.624469] RSP: 0018:ffffb20800ab76d8 EFLAGS: 00010286 [ 46.629854] RAX: 0000000000000075 RBX: ffff94c1c318a0e0 RCX: 0000000000000000 [ 46.637105] RDX: 0000000000000201 RSI: ffffffff9365e100 RDI: 00000000ffffffff [ 46.644356] RBP: ffff94c1c5f43370 R08: 0000000000000075 R09: 3064316334396666 [ 46.651607] R10: 3364323064316334 R11: 39666666663d7665 R12: ffff94c1c5f43388 [ 46.658857] R13: ffff94c1d02d3388 R14: ffff94c1c318a360 R15: ffff94c1cf2289c0 [ 46.666108] FS: 00007f65634ff7c0(0000) GS:ffff94c1da200000(0000) knlGS:0000000000000000 [ 46.674331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 46.680170] CR2: 00007f7dfe984460 CR3: 000000010e894003 CR4: 00000000000606f0 [ 46.687422] Call Trace: [ 46.689906] <TASK> [ 46.691950] iwl_mvm_mac_wake_tx_queue+0xec/0x15c [iwlmvm] [ 46.697601] ieee80211_queue_skb+0x4b3/0x720 [mac80211] [ 46.702973] ? sta_info_get+0x46/0x60 [mac80211] [ 46.707703] ieee80211_tx+0xad/0x110 [mac80211] [ 46.712355] __ieee80211_tx_skb_tid_band+0x71/0x90 [mac80211] ... In order to avoid this problem, we must also remove the related lists when station queues are disabled. Fixes: cfbc6c4c5b91c ("iwlwifi: mvm: support mac80211 TXQs model") Reported-by: Takayuki Nagata <tnagata@redhat.com> Reported-by: Petr Stourac <pstourac@redhat.com> Tested-by: Petr Stourac <pstourac@redhat.com> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220719153542.81466-1-jtornosm@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-09iwlwifi: mvm: fix assert 1F04 upon reconfigEmmanuel Grumbach1-0/+3
commit 9d096e3d3061dbf4ee10e2b59fc2c06e05bdb997 upstream. When we reconfig we must not send the MAC_POWER command that relates to a MAC that was not yet added to the firmware. Ignore those in the iterator. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20220517120044.ed2ffc8ce732.If786e19512d0da4334a6382ea6148703422c7d7b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-13iwlwifi: mvm: Correctly set fragmented EBSIlan Peer1-1/+4
[ Upstream commit d8d4dd26b9e0469baf5017f0544d852fd4e3fb6d ] Currently, fragmented EBS was set for a channel only if the 'hb_type' was set to fragmented or balanced scan. However, 'hb_type' is set only in case of CDB, and thus fragmented EBS is never set for a channel for non-CDB devices. Fix it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220204122220.a6165ac9b9d5.I654eafa62fd647030ae6d4f07f32c96c3171decb@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08iwlwifi: mvm: Fix an error code in iwl_mvm_up()Dan Carpenter1-1/+3
[ Upstream commit 583d18336abdfb1b355270289ff8f6a2608ba905 ] Return -ENODEV instead of success on this error path. Fixes: dd36a507c806 ("iwlwifi: mvm: look for the first supported channel when add/remove phy ctxt") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210816183930.GA2068@kili Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-19iwlwifi: don't advertise TWT supportGolan Ben Ami1-1/+0
[ Upstream commit 1db5fcbba2631277b78d7f8aff99c9607d29f6d8 ] Some APs misbehave when TWT is used and cause our firmware to crash. We don't know a reasonable way to detect and work around this problem in the FW yet. To prevent these crashes, disable TWT in the driver by stopping to advertise TWT support. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215523 Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> [reworded the commit message] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20220301072926.153969-1-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27iwlwifi: mvm: Increase the scan timeout guard to 30 secondsIlan Peer1-1/+1
commit ced50f1133af12f7521bb777fcf4046ca908fb77 upstream. With the introduction of 6GHz channels the scan guard timeout should be adjusted to account for the following extreme case: - All 6GHz channels are scanned passively: 58 channels. - The scan is fragmented with the following parameters: 3 fragments, 95 TUs suspend time, 44 TUs maximal out of channel time. The above would result with scan time of more than 24 seconds. Thus, set the timeout to 30 seconds. Cc: stable@vger.kernel.org Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211210090244.3c851b93aef5.I346fa2e1d79220a6770496e773c6f87a2ad9e6c4@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27iwlwifi: mvm: Fix calculation of frame lengthIlan Peer1-0/+27
[ Upstream commit 40a0b38d7a7f91a6027287e0df54f5f547e8d27e ] The RADA might include in the Rx frame the MIC and CRC bytes. These bytes should be removed for non monitor interfaces and should not be passed to mac80211. Fix the Rx processing to remove the extra bytes on non monitor cases. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.098be12c801e.I1d81733d8a75b84c3b20eb6e0d14ab3405ca6a86@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27iwlwifi: mvm: avoid clearing a just saved session protection idShaul Triebitz1-6/+6
[ Upstream commit 8e967c137df3b236d2075f9538cb888129425d1a ] When scheduling a session protection the id is saved but then it may be cleared when calling iwl_mvm_te_clear_data (if a previous session protection is currently active). Fix it by saving the id after calling iwl_mvm_te_clear_data. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204130722.b0743a588d14.I098fef6677d0dab3ef1b6183ed206a10bab01eb2@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27iwlwifi: mvm: synchronize with FW after multicast commandsJohannes Berg1-0/+17
[ Upstream commit db66abeea3aefed481391ecc564fb7b7fb31d742 ] If userspace installs a lot of multicast groups very quickly, then we may run out of command queue space as we send the updates in an asynchronous fashion (due to locking concerns), and the CPU can create them faster than the firmware can process them. This is true even when mac80211 has a work struct that gets scheduled. Fix this by synchronizing with the firmware after sending all those commands - outside of the iteration we can send a synchronous echo command that just has the effect of the CPU waiting for the prior asynchronous commands to finish. This also will cause fewer of the commands to be sent to the firmware overall, because the work will only run once when rescheduled multiple times while it's running. Link: https://bugzilla.kernel.org/show_bug.cgi?id=213649 Suggested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reported-by: Maximilian Ernestus <maximilian@ernestus.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204083238.51aea5b79ea4.I88a44798efda16e9fe480fb3e94224931d311b29@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27iwlwifi: mvm: Use div_s64 instead of do_div in iwl_mvm_ftm_rtt_smoothing()Nathan Chancellor1-2/+1
[ Upstream commit 4ccdcc8ffd955490feec05380223db6a48961eb5 ] When building ARCH=arm allmodconfig: drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c: In function ‘iwl_mvm_ftm_rtt_smoothing’: ./include/asm-generic/div64.h:222:35: error: comparison of distinct pointer types lacks a cast [-Werror] 222 | (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \ | ^~ drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c:1070:9: note: in expansion of macro ‘do_div’ 1070 | do_div(rtt_avg, 100); | ^~~~~~ do_div() has to be used with an unsigned 64-bit integer dividend but rtt_avg is a signed 64-bit integer. div_s64() expects a signed 64-bit integer dividend and signed 32-bit divisor, which fits this scenario, so use that function here to fix the warning. Fixes: 8b0f92549f2c ("iwlwifi: mvm: fix 32-bit build in FTM") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20211227191757.2354329-1-nathan@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27iwlwifi: mvm: test roc running status bits before removing the staNathan Errera1-3/+12
[ Upstream commit 998e1aba6e5eb35370eaf30ccc1823426ec11f90 ] In some cases the sta is being removed twice since we do not test the roc aux running before removing it. Start looking at the bit before removing the sta. Signed-off-by: Nathan Errera <nathan.errera@intel.com> Fixes: 2c2c3647cde4 ("iwlwifi: mvm: support ADD_STA_CMD_API_S ver 12") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.d5376ac6bcb0.Ic5f8470ea60c072bde9d1503e5f528b65e301e20@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27iwlwifi: mvm: fix 32-bit build in FTMJohannes Berg1-1/+2
[ Upstream commit 8b0f92549f2c2458200935c12a2e2a6e80234cf5 ] On a 32-bit build, the division here needs to be done using do_div(), otherwise the compiler will try to call a function that doesn't exist, thus failing to build. Fixes: b68bd2e3143a ("iwlwifi: mvm: Add FTM initiator RTT smoothing logic") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219111352.e56cbf614a4d.Ib98004ccd2c7a55fd883a8ea7eebd810f406dec6@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08iwlwifi: mvm: retry init flow if failedMordechay Goodstein3-1/+29
commit 5283dd677e52af9db6fe6ad11b2f12220d519d0c upstream. In some very rare cases the init flow may fail. In many cases, this is recoverable, so we can retry. Implement a loop to retry two more times after the first attempt failed. This can happen in two different situations, namely during probe and during mac80211 start. For the first case, a simple loop is enough. For the second case, we need to add a flag to prevent mac80211 from trying to restart it as well, leaving full control with the driver. Cc: <stable@vger.kernel.org> Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20211110150132.57514296ecab.I52a0411774b700bdc7dedb124d8b59bf99456eb2@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18iwlwifi: mvm: disable RX-diversity in powersaveJohannes Berg1-0/+3
[ Upstream commit e5322b9ab5f63536c41301150b7ce64605ce52cc ] Just like we have default SMPS mode as dynamic in powersave, we should not enable RX-diversity in powersave, to reduce power consumption when connected to a non-MIMO AP. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017113927.fc896bc5cdaa.I1d11da71b8a5cbe921a37058d5f578f1b14a2023@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-18iwlwifi: mvm: Fix scan channel flags settingsIlan Peer1-1/+1
[ Upstream commit 090f1be3abf3069ef856b29761f181808bf55917 ] The iwl_mvm_scan_ch_n_aps_flag() is called with a variable before the value of the variable is set. Fix it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.f6f188980a5e.Ie7331a8b94004d308f6cbde44e519155a5be91dd@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-18iwlwifi: mvm: fix access to BSS elementsJohannes Berg1-2/+6
[ Upstream commit 6c608cd6962ebdf84fd3de6d42f88ed64d2f4e1b ] BSS elements are protected using RCU, so we need to use RCU properly to access them, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210805130823.fd8b5791ab44.Iba26800a6301078d3782fb249c476dd8ac2bf3c6@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-18iwlwifi: mvm: avoid static queue number aliasingJohannes Berg2-16/+38
[ Upstream commit c6ce1c74ef2923b8ffd85f7f8b486f804f343b39 ] When TVQM is enabled (iwl_mvm_has_new_tx_api() is true), then queue numbers are just sequentially assigned 0, 1, 2, ... Prior to TVQM, in DQA, there were some statically allocated queue numbers: * IWL_MVM_DQA_AUX_QUEUE == 1, * both IWL_MVM_DQA_INJECT_MONITOR_QUEUE and IWL_MVM_DQA_P2P_DEVICE_QUEUE == 2, and * IWL_MVM_DQA_AP_PROBE_RESP_QUEUE == 9. Now, these values are assigned to the members mvm->aux_queue, mvm->snif_queue, mvm->probe_queue and mvm->p2p_dev_queue by default. Normally, this doesn't really matter, and if TVQM is in fact available we override them to the real values after allocating a queue for use there. However, this allocation doesn't always happen. For example, for mvm->p2p_dev_queue (== 2) it only happens when the P2P Device interface is started, if any. If it's not started, the value in mvm->p2p_dev_queue remains 2. This wouldn't really matter all that much if it weren't for iwl_mvm_is_static_queue() which checks a queue number against one of those four static numbers. Now, if no P2P Device or monitor interface is added then queue 2 may be dynamically allocated, yet alias mvm->p2p_dev_queue or mvm->snif_queue, and thus iwl_mvm_is_static_queue() erroneously returns true for it. If it then gets full, all interface queues are stopped, instead of just backpressuring against the one TXQ that's really the only affected one. This clearly can lead to issues, as everything is stopped even if just a single TXQ filled its corresponding HW queue, if it happens to have an appropriate number (2 or 9, AUX is always reassigned.) Due to a mac80211 bug, this also led to a situation in which the queues remained stopped across a deauthentication and then attempts to connect to a new AP started failing, but that's fixed separately. Fix all of this by simply initializing the queue numbers to the invalid value until they're used, if TVQM is enabled, and also setting them back to that value when the queues are later freed again. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210802172232.2e47e623f9e2.I9b0830dafbb68ef35b7b8f0f46160abec02ac7d0@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-18iwlwifi: mvm: fix a memory leak in iwl_mvm_mac_ctxt_beacon_changedZhang Qilong1-1/+3
[ Upstream commit 0f5d44ac6e55551798dd3da0ff847c8df5990822 ] If beacon_inject_active is true, we will return without freeing beacon. Fid that by freeing it before returning. Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> [reworded the commit message] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210802172232.d16206ca60fc.I9984a9b442c84814c307cee3213044e24d26f38a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-15iwlwifi: follow the new inclusive terminologyEmmanuel Grumbach4-26/+27
[ Upstream commit cdaba917268d7b58bf02fcc587cb2a7a277dc931 ] The new inclusive terminology requires to change a few terms that were used in iwlwifi. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.1eb4c8625f36.I1b17b68d4a8e77071da3e15ffbd902d15c1d4938@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19iwlwifi: mvm: fix error print when session protection endsShaul Triebitz1-0/+4
[ Upstream commit 976ac0af7ba2c5424bc305b926c0807d96fdcc83 ] When the session protection ends and the Driver is not associated or a beacon was not heard, the Driver prints "No beacons heard...". That's confusing for the case where not associated. Change the print when not associated to "Not associated...". Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210617100544.41a5a5a894fa.I9eabb76e7a3a7f4abbed8f2ef918f1df8e825726@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19iwlwifi: mvm: don't change band on bound PHY contextsJohannes Berg1-6/+18
[ Upstream commit 8835a64f74c46baebfc946cd5a2c861b866ebcee ] When we have a P2P Device active, we attempt to only change the PHY context it uses when we get a new remain-on-channel, if the P2P Device is the only user of the PHY context. This is fine if we're switching within a band, but if we're switching bands then the switch implies a removal and re-add of the PHY context, which isn't permitted by the firmware while it's bound to an interface. Fix the code to skip the unbind/release/... cycle only if the band doesn't change (or we have old devices that can switch the band on the fly as well.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210612142637.e9ac313f70f3.I713b9d109957df7e7d9ed0861d5377ce3f8fccd3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14mac80211: remove iwlwifi specific workaround that broke sta NDP txFelix Fietkau1-0/+3
commit e41eb3e408de27982a5f8f50b2dd8002bed96908 upstream. Sending nulldata packets is important for sw AP link probing and detecting 4-address mode links. The checks that dropped these packets were apparently added to work around an iwlwifi firmware bug with multi-TID aggregation. Fixes: 41cbb0f5a295 ("mac80211: add support for HE") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210619101517.90806-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04iwlwifi: mvm: don't check if CSA event is running before removingSara Sharon1-3/+0
[ Upstream commit b8a86164454aa745ecb534d7477d50d440ea05b6 ] We may want to remove it before it started (i.e. before the actual switch time). Signed-off-by: Sara Sharon <sara.sharon@intel.com> Fixes: 58ddd9b6d194 ("iwlwifi: mvm: don't send a CSA command the firmware doesn't know") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210171218.835db8987b8a.Ic6c5d28d744302db1bc6c4314bd3138ba472f834@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04iwlwifi: mvm: assign SAR table revision to the command laterLuca Coelho1-2/+10
[ Upstream commit 28db1862067cb09ebfdccfbc129a52c6fdb4c4d7 ] The call to iwl_sar_geo_init() was moved to the end of the iwl_mvm_sar_geo_init() function, after the table revision is assigned to the FW command. But the revision is only known after iwl_sar_geo_init() is called, so we were always assigning zero to it. Fix that by moving the assignment code after the iwl_sar_geo_init() function is called. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Fixes: 45acebf8d6a6 ("iwlwifi: fix sar geo table initialization") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210135352.cef55ef3a065.If96c60f08d24c2262c287168a6f0dbd7cf0f8f5c@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04iwlwifi: mvm: send stored PPAG command instead of localLuca Coelho1-6/+3
[ Upstream commit 659844d391826bfc5c8b4d9a06869ed51d859c76 ] Some change conflicts apparently cause a confusion between a local variable being used to send the PPAG command and the introduction of a union for this command. Most parts of the local command were never copied from the stored data, so the FW was getting garbage in the tables instead of getting valid values. Fix this by completely removing the local and using only the union that we have stored in fwrt. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Fixes: f2134f66f40e ("iwlwifi: acpi: support ppag table command v2") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210135352.d090e0301023.I7d57f4d7da9a3297734c51cf988199323c76916d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04iwlwifi: mvm: store PPAG enabled/disabled flag properlyLuca Coelho1-4/+3
[ Upstream commit 551d793f65364c904921ac168d4b4028bb51be69 ] When reading the PPAG table from ACPI, we should store everything in our fwrt structure, so it can be accessed later. But we had a local ppag_table variable in the function and were erroneously storing the enabled/disabled flag in it instead of storing it in the fwrt. Fix this by removing the local variable and storing everything directly in fwrt. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Fixes: f2134f66f40e ("iwlwifi: acpi: support ppag table command v2") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210135352.889862e6d393.I8b894c1b2b3fe0ad2fb39bf438273ea47eb5afa4@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04iwlwifi: mvm: fix the type we use in the PPAG table validity checksLuca Coelho1-6/+13
[ Upstream commit 5a6842455c113920001df83cffa28accceeb0927 ] The value we receive from ACPI is a long long unsigned integer but the values should be treated as signed char. When comparing the received value with ACPI_PPAG_MIN_LB/HB, we were doing an unsigned comparison, so the negative value would actually be treated as a very high number. To solve this issue, assign the value to our table of s8's before making the comparison, so the value is already converted when we do so. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210135352.b0ec69f312bc.If77fd9c61a96aa7ef2ac96d935b7efd7df502399@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04iwlwifi: mvm: set enabled in the PPAG command properlyLuca Coelho1-0/+2
[ Upstream commit efaa85cf2294d5e10a724e24356507eeb3836f72 ] When version 2 of the PER_PLATFORM_ANT_GAIN_CMD was implemented, we started copying the values from the command that we have stored into a local instance. But we accidentally forgot to copy the enabled flag, so in practice PPAG is never really enabled. Fix this by copying the flag from our stored data a we should. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Fixes: f2134f66f40e ("iwlwifi: acpi: support ppag table command v2") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210131201908.24d7bf754ad5.I0e8abc2b8747508b6118242533d68c856ca6dffb@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-13iwlwifi: mvm: guard against device removal in reprobeJohannes Berg1-1/+2
[ Upstream commit 7a21b1d4a728a483f07c638ccd8610d4b4f12684 ] If we get into a problem severe enough to attempt a reprobe, we schedule a worker to do that. However, if the problem gets more severe and the device is actually destroyed before this worker has a chance to run, we use a free device. Bump up the reference count of the device until the worker runs to avoid this situation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.871f0892e4b2.I94819e11afd68d875f3e242b98bef724b8236f1e@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-13iwlwifi: mvm: invalidate IDs of internal stations at mvm startGregory Greenman2-0/+10
[ Upstream commit e223e42aac30bf81f9302c676cdf58cf2bf36950 ] Having sta_id not set for aux_sta and snif_sta can potentially lead to a hard to debug issue in case remove station is called without an add. In this case sta_id 0, an unrelated regular station, will be removed. In fact, we do have a FW assert that occures rarely and from the debug data analysis it looks like sta_id 0 is removed by mistake, though it's hard to pinpoint the exact flow. The WARN_ON in this patch should help to find it. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.5dc6dd9b22d5.I2add1b5ad24d0d0a221de79d439c09f88fcaf15d@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-13iwlwifi: mvm: take mutex for calling iwl_mvm_get_sync_time()Johannes Berg1-0/+3
[ Upstream commit 5c56d862c749669d45c256f581eac4244be00d4d ] We need to take the mutex to call iwl_mvm_get_sync_time(), do it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.4bb5ccf881a6.I62973cbb081e80aa5b0447a5c3b9c3251a65cf6b@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-13iwlwifi: mvm: skip power command when unbinding vif during CSASara Sharon1-0/+3
[ Upstream commit bf544e9aa570034e094a8a40d5f9e1e2c4916d18 ] In the new CSA flow, we remain associated during CSA, but still do a unbind-bind to the vif. However, sending the power command right after when vif is unbound but still associated causes FW to assert (0x3400) since it cannot tell the LMAC id. Just skip this command, we will send it again in a bit, when assigning the new context. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.64a2254ac5c3.Iaa3a9050bf3d7c9cd5beaf561e932e6defc12ec3@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-04iwlwifi: provide gso_type to GSO packetsEric Dumazet1-0/+3
commit 81a86e1bd8e7060ebba1718b284d54f1238e9bf9 upstream. net/core/tso.c got recent support for USO, and this broke iwlfifi because the driver implemented a limited form of GSO. Providing ->gso_type allows for skb_is_gso_tcp() to provide a correct result. Fixes: 3d5b459ba0e3 ("net: tso: add UDP segmentation support") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Ben Greear <greearb@candelatech.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Johannes Berg <johannes@sipsolutions.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209913 Link: https://lore.kernel.org/r/20210125150949.619309-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Cc: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30iwlwifi: mvm: hook up missing RX handlersJohannes Berg1-0/+6
[ Upstream commit 8a59d39033c35bb484f6bd91891db86ebe07fdc2 ] The RX handlers for probe response data and channel switch weren't hooked up properly, fix that. Fixes: 86e177d80ff7 ("iwlwifi: mvm: add NOA and CSA to a probe response") Fixes: d3a108a48dc6 ("iwlwifi: mvm: Support CSA countdown offloading") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.2d07dcee0d35.I07a61b5d734478db57d9434ff303e4c90bf6c32b@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10iwlwifi: mvm: fix kernel panic in case of assert during CSASara Sharon1-1/+1
During CSA, we briefly nullify the phy context, in __iwl_mvm_unassign_vif_chanctx. In case we have a FW assert right after it, it remains NULL though. We end up running into endless loop due to mac80211 trying repeatedly to move us to ASSOC state, and we keep returning -EINVAL. Later down the road we hit a kernel panic. Detect and avoid this endless loop. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201107104557.d64de2c17bff.Iedd0d2afa20a2aacba5259a5cae31cb3a119a4eb@changeid
2020-11-10iwlwifi: mvm: write queue_sync_state only for syncAvraham Stern1-0/+3
We use mvm->queue_sync_state to wait for synchronous queue sync messages, but if an async one happens inbetween we shouldn't clear mvm->queue_sync_state after sending the async one, that can run concurrently (at least from the CPU POV) with another synchronous queue sync. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 3c514bf831ac ("iwlwifi: mvm: add a loose synchronization of the NSSN across Rx queues") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201107104557.51a3148f2c14.I0772171dbaec87433a11513e9586d98b5d920b5f@changeid
2020-11-10iwlwifi: mvm: properly cancel a session protection for P2PEmmanuel Grumbach1-31/+63
We need to feed the configuration id to remove session protection properly. Remember the conf_id when we add the session protection so that we can give it back when we want to remove the session protection. While at it, slightly improve the kernel doc for the conf_id of the notification. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: fe959c7b2049 ("iwlwifi: mvm: use the new session protection command") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201107104557.3642f730333d.I01a98ecde62096d00d171cf34ad775bf80cb0277@changeid
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-08 00:43:28 +0300