summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm
AgeCommit message (Collapse)AuthorFilesLines
2020-10-29iwlwifi: mvm: split a print to avoid a WARNING in ROCEmmanuel Grumbach1-3/+6
[ Upstream commit 903b3f9badf1d54f77b468b96706dab679b45b14 ] A print in the remain on channel code was too long and caused a WARNING, split it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: dc28e12f2125 ("iwlwifi: mvm: ROC: Extend the ROC max delay duration & limit ROC duration") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200930102759.58d57c0bdc68.Ib06008665e7bf1199c360aa92691d9c74fb84990@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-20iwlwifi: mvm: Do not require PHY_SKU NVM section for 3168 devicesDan Moulding1-1/+2
commit a9149d243f259ad8f02b1e23dfe8ba06128f15e1 upstream. The logic for checking required NVM sections was recently fixed in commit b3f20e098293 ("iwlwifi: mvm: fix NVM check for 3168 devices"). However, with that fixed the else is now taken for 3168 devices and within the else clause there is a mandatory check for the PHY_SKU section. This causes the parsing to fail for 3168 devices. The PHY_SKU section is really only mandatory for the IWL_NVM_EXT layout (the phy_sku parameter of iwl_parse_nvm_data is only used when the NVM type is IWL_NVM_EXT). So this changes the PHY_SKU section check so that it's only mandatory for IWL_NVM_EXT. Fixes: b3f20e098293 ("iwlwifi: mvm: fix NVM check for 3168 devices") Signed-off-by: Dan Moulding <dmoulding@me.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28iwlwifi: mvm: Fix thermal zone registrationAndrei Otcheretianski1-1/+3
[ Upstream commit baa6cf8450b72dcab11f37c47efce7c5b9b8ad0f ] Use a unique name when registering a thermal zone. Otherwise, with multiple NICS, we hit the following warning during the unregistration. WARNING: CPU: 2 PID: 3525 at fs/sysfs/group.c:255 RIP: 0010:sysfs_remove_group+0x80/0x90 Call Trace: dpm_sysfs_remove+0x57/0x60 device_del+0x5a/0x350 ? sscanf+0x4e/0x70 device_unregister+0x1a/0x60 hwmon_device_unregister+0x4a/0xa0 thermal_remove_hwmon_sysfs+0x175/0x1d0 thermal_zone_device_unregister+0x188/0x1e0 iwl_mvm_thermal_exit+0xe7/0x100 [iwlmvm] iwl_op_mode_mvm_stop+0x27/0x180 [iwlmvm] _iwl_op_mode_stop.isra.3+0x2b/0x50 [iwlwifi] iwl_opmode_deregister+0x90/0xa0 [iwlwifi] __exit_compat+0x10/0x2c7 [iwlmvm] __x64_sys_delete_module+0x13f/0x270 do_syscall_64+0x5a/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-15iwlwifi: don't throw error when trying to remove IGTKLuca Coelho1-3/+7
commit 197288d5ba8a5289f22d3aeb4fca3824bfd9b4af upstream. The IGTK keys are only removed by mac80211 after it has already removed the AP station. This causes the driver to throw an error because mac80211 is trying to remove the IGTK when the station doesn't exist anymore. The firmware is aware that the station has been removed and can deal with it the next time we try to add an IGTK for a station, so we shouldn't try to remove the key if the station ID is IWL_MVM_INVALID_STA. Do this by removing the check for mvm_sta before calling iwl_mvm_send_sta_igtk() and check return from that function gracefully if the station ID is invalid. Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-15iwlwifi: mvm: fix NVM check for 3168 devicesLuca Coelho1-1/+1
[ Upstream commit b3f20e098293892388d6a0491d6bbb2efb46fbff ] We had a check on !NVM_EXT and then a check for NVM_SDP in the else block of this if. The else block, obviously, could only be reached if using NVM_EXT, so it would never be NVM_SDP. Fix that by checking whether the nvm_type is IWL_NVM instead of checking for !IWL_NVM_EXT to solve this issue. Reported-by: Stefan Sperling <stsp@stsp.name> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27iwlwifi: mvm: fix RSS config commandSara Sharon1-6/+6
[ Upstream commit 608dce95db10b8ee1a26dbce3f60204bb69812a5 ] The hash mask is a bitmap, so we should use BIT() on the enum values. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Fixes: 43413a975d06 ("iwlwifi: mvm: support rss queues configuration command") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27iwlwifi: mvm: fix A-MPDU reference assignmentJohannes Berg1-1/+1
[ Upstream commit 1f7698abedeeb3fef3cbcf78e16f925df675a179 ] The current code assigns the reference, and then goes to increment it if the toggle bit has changed. That way, we get Toggle 0 0 0 0 1 1 1 1 ID 1 1 1 1 1 2 2 2 Fix that by assigning the post-toggle ID to get Toggle 0 0 0 0 1 1 1 1 ID 1 1 1 1 2 2 2 2 Reported-by: Danny Alexander <danny.alexander@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: fbe4112791b8 ("iwlwifi: mvm: update mpdu metadata API") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27iwlwifi: mvm: avoid possible access out of array.Mordechay Goodstein1-6/+13
[ Upstream commit b0d795a9ae558209656b18930c2b4def5f8fdfb8 ] The value in txq_id can be out of array scope, validate it before accessing the array. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Fixes: cf961e16620f ("iwlwifi: mvm: support dqa-mode agg on non-shared queue") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31iwlwifi: check kasprintf() return valueJohannes Berg1-0/+3
[ Upstream commit 5974fbb5e10b018fdbe3c3b81cb4cc54e1105ab9 ] kasprintf() can fail, we should check the return value. Fixes: 5ed540aecc2a ("iwlwifi: use mac80211 throughput trigger") Fixes: 8ca151b568b6 ("iwlwifi: add the MVM driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31iwlwifi: mvm: fix unaligned read of rx_pkt_statusWang Xuerui1-1/+2
[ Upstream commit c5aaa8be29b25dfe1731e9a8b19fd91b7b789ee3 ] This is present since the introduction of iwlmvm. Example stack trace on MIPS: [<ffffffffc0789328>] iwl_mvm_rx_rx_mpdu+0xa8/0xb88 [iwlmvm] [<ffffffffc0632b40>] iwl_pcie_rx_handle+0x420/0xc48 [iwlwifi] Tested with a Wireless AC 7265 for ~6 months, confirmed to fix the problem. No other unaligned accesses are spotted yet. Signed-off-by: Wang Xuerui <wangxuerui@qiniu.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17iwlwifi: mvm: Send non offchannel traffic via AP staAndrei Otcheretianski1-0/+15
[ Upstream commit dc1aca22f8f38b7e2ad7b118db87404d11e68771 ] TDLS discovery response frame is a unicast direct frame to the peer. Since we don't have a STA for this peer, this frame goes through iwl_tx_skb_non_sta(). As the result aux_sta and some completely arbitrary queue would be selected for this frame, resulting in a queue hang. Fix that by sending such frames through AP sta instead. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17iwlwifi: mvm: synchronize TID queue removalJohannes Berg1-0/+10
[ Upstream commit 06bc6f6ed4ae0246a5e52094d1be90906a1361c7 ] When we mark a TID as no longer having a queue, there's no guarantee the TX path isn't using this txq_id right now, having accessed it just before we reset the value. To fix this, add synchronize_net() when we change the TIDs from having a queue to not having one, so that we can then be sure that the TX path is no longer accessing that queue. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05iwlwifi: move iwl_nvm_check_version() into dvmLuca Coelho1-1/+3
[ Upstream commit 64866e5da1eabd0c52ff45029b245f5465920031 ] This function is only half-used by mvm (i.e. only the nvm_version part matters, since the calibration version is irrelevant), so it's pointless to export it from iwlwifi. If mvm uses this function, it has the additional complexity of setting the calib version to a bogus value on all cfg structs. To avoid this, move the function to dvm and make a simple comparison of the nvm_version in mvm instead. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-24iwlwifi: mvm: don't send keys when entering D3Sara Sharon1-1/+3
[ Upstream commit 8c7fd6a365eb5b2647b2c01918730d0a485b9f85 ] In the past, we needed to program the keys when entering D3. This was since we replaced the image. However, now that there is a single image, this is no longer needed. Note that RSC is sent separately in a new command. This solves issues with newer devices that support PN offload. Since driver re-sent the keys, the PN got zeroed and the receiver dropped the next packets, until PN caught up again. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-20iwlwifi: mvm: Allow TKIP for AP modeIlan Peer1-4/+0
[ Upstream commit 6f3df8c1192c873a6ad9a76328920f6f85af90a8 ] Support for setting keys for TKIP cipher suite was mistakenly removed for AP mode. Fix this. Fixes: 85aeb58cec1a ("iwlwifi: mvm: Enable security on new TX API") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-20iwlwifi: mvm: avoid sending too many BARsSara Sharon1-0/+8
[ Upstream commit 1a19c139be18ed4d6d681049cc48586fae070120 ] When we receive TX response, we may release a few packets due to a hole that was closed in the transmission window. However, if that frame failed, we will mark all the released frames as failed and will send multiple BARs. This affects statistics badly, and cause unnecessary frames transmission. Instead, mark all the following packets as success, with the desired result of sending a bar for the failed frame only. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-05iwlwifi: mvm: send BCAST management frames to the right stationEmmanuel Grumbach1-1/+1
commit 65c3b582ecab7a403efdf08babbf87fdbe27369c upstream. Probe responses were sent to the multicast station while they should be routed to the broadcast station. This has no negative effect since the frame was still routed to the right queue, but it looked very fishy to send a frame to a (queue, station) tuple where 'queue' is not mapped to 'station'. Fixes: 7c305de2b954 ("iwlwifi: mvm: Direct multicast frames to the correct station") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16iwlwifi: mvm: fix version check for GEO_TX_POWER_LIMIT supportLuca Coelho1-2/+7
commit f5a47fae6aa3eb06f100e701d2342ee56b857bee upstream. We erroneously added a check for FW API version 41 before sending GEO_TX_POWER_LIMIT, but this was already implemented in version 38. Additionally, it was cherry-picked to older versions, namely 17, 26 and 29, so check for those as well. Cc: stable@vger.kernel.org Fixes: eca1e56ceedd ("iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT to old firmwares") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT on version < 41Luca Coelho1-7/+15
commit 39bd984c203e86f3109b49c2a2e20677c4d3ab65 upstream. Firmware versions before 41 don't support the GEO_TX_POWER_LIMIT command, and sending it to the firmware will cause a firmware crash. We allow this via debugfs, so we need to return an error value in case it's not supported. This had already been fixed during init, when we send the command if the ACPI WGDS table is present. Fix it also for the other, userspace-triggered case. Cc: stable@vger.kernel.org Fixes: 7fe90e0e3d60 ("iwlwifi: mvm: refactor geo init") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16iwlwifi: mvm: fix an out-of-bound accessEmmanuel Grumbach1-1/+1
commit ba3224db78034435e9ff0247277cce7c7bb1756c upstream. The index for the elements of the ACPI object we dereference was static. This means that if we called the function twice we wouldn't start from 3 again, but rather from the latest index we reached in the previous call. This was dutifully reported by KASAN. Fix this. Cc: stable@vger.kernel.org Fixes: 6996490501ed ("iwlwifi: mvm: add support for EWRD (Dynamic SAR) ACPI table") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-31iwlwifi: mvm: Drop large non sta framesAndrei Otcheretianski1-0/+3
[ Upstream commit ac70499ee97231a418dc1a4d6c9dc102e8f64631 ] In some buggy scenarios we could possible attempt to transmit frames larger than maximum MSDU size. Since our devices don't know how to handle this, it may result in asserts, hangs etc. This can happen, for example, when we receive a large multicast frame and try to transmit it back to the air in AP mode. Since in a legal scenario this should never happen, drop such frames and warn about it. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-25iwlwifi: mvm: check for length correctness in iwl_mvm_create_skb()Luca Coelho1-4/+24
[ Upstream commit de1887c064b9996ac03120d90d0a909a3f678f98 ] We don't check for the validity of the lengths in the packet received from the firmware. If the MPDU length received in the rx descriptor is too short to contain the header length and the crypt length together, we may end up trying to copy a negative number of bytes (headlen - hdrlen < 0) which will underflow and cause us to try to copy a huge amount of data. This causes oopses such as this one: BUG: unable to handle kernel paging request at ffff896be2970000 PGD 5e201067 P4D 5e201067 PUD 5e205067 PMD 16110d063 PTE 8000000162970161 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 1824 Comm: irq/134-iwlwifi Not tainted 4.19.33-04308-geea41cf4930f #1 Hardware name: [...] RIP: 0010:memcpy_erms+0x6/0x10 Code: 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe RSP: 0018:ffffa4630196fc60 EFLAGS: 00010287 RAX: ffff896be2924618 RBX: ffff896bc8ecc600 RCX: 00000000fffb4610 RDX: 00000000fffffff8 RSI: ffff896a835e2a38 RDI: ffff896be2970000 RBP: ffffa4630196fd30 R08: ffff896bc8ecc600 R09: ffff896a83597000 R10: ffff896bd6998400 R11: 000000000200407f R12: ffff896a83597050 R13: 00000000fffffff8 R14: 0000000000000010 R15: ffff896a83597038 FS: 0000000000000000(0000) GS:ffff896be8280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff896be2970000 CR3: 000000005dc12002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: iwl_mvm_rx_mpdu_mq+0xb51/0x121b [iwlmvm] iwl_pcie_rx_handle+0x58c/0xa89 [iwlwifi] iwl_pcie_irq_rx_msix_handler+0xd9/0x12a [iwlwifi] irq_thread_fn+0x24/0x49 irq_thread+0xb0/0x122 kthread+0x138/0x140 ret_from_fork+0x1f/0x40 Fix that by checking the lengths for correctness and trigger a warning to show that we have received wrong data. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-29iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT to old firmwaresEmmanuel Grumbach1-0/+9
commit eca1e56ceedd9cc185eb18baf307d3ff2e4af376 upstream. Old firmware versions don't support this command. Sending it to any firmware before -41.ucode will crash the firmware. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201975 Fixes: 66e839030fd6 ("iwlwifi: fix wrong WGDS_WIFI_DATA_SIZE") CC: <stable@vger.kernel.org> #4.19+ Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01iwlwifi: fix wrong WGDS_WIFI_DATA_SIZEMatt Chen1-2/+2
commit 66e839030fd698586734e017fd55c4f2a89dba0b upstream. From coreboot/BIOS: Name ("WGDS", Package() { Revision, Package() { DomainType, // 0x7:WiFi ==> We miss this one. WgdsWiFiSarDeltaGroup1PowerMax1, // Group 1 FCC 2400 Max WgdsWiFiSarDeltaGroup1PowerChainA1, // Group 1 FCC 2400 A Offset WgdsWiFiSarDeltaGroup1PowerChainB1, // Group 1 FCC 2400 B Offset WgdsWiFiSarDeltaGroup1PowerMax2, // Group 1 FCC 5200 Max WgdsWiFiSarDeltaGroup1PowerChainA2, // Group 1 FCC 5200 A Offset WgdsWiFiSarDeltaGroup1PowerChainB2, // Group 1 FCC 5200 B Offset WgdsWiFiSarDeltaGroup2PowerMax1, // Group 2 EC Jap 2400 Max WgdsWiFiSarDeltaGroup2PowerChainA1, // Group 2 EC Jap 2400 A Offset WgdsWiFiSarDeltaGroup2PowerChainB1, // Group 2 EC Jap 2400 B Offset WgdsWiFiSarDeltaGroup2PowerMax2, // Group 2 EC Jap 5200 Max WgdsWiFiSarDeltaGroup2PowerChainA2, // Group 2 EC Jap 5200 A Offset WgdsWiFiSarDeltaGroup2PowerChainB2, // Group 2 EC Jap 5200 B Offset WgdsWiFiSarDeltaGroup3PowerMax1, // Group 3 ROW 2400 Max WgdsWiFiSarDeltaGroup3PowerChainA1, // Group 3 ROW 2400 A Offset WgdsWiFiSarDeltaGroup3PowerChainB1, // Group 3 ROW 2400 B Offset WgdsWiFiSarDeltaGroup3PowerMax2, // Group 3 ROW 5200 Max WgdsWiFiSarDeltaGroup3PowerChainA2, // Group 3 ROW 5200 A Offset WgdsWiFiSarDeltaGroup3PowerChainB2, // Group 3 ROW 5200 B Offset } }) When read the ACPI data to find out the WGDS, the DATA_SIZE is never matched. From the above format, it gives 19 numbers, but our driver is hardcode as 18. Fix it to pass then can parse the data into our wgds table. Then we will see: iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init Sending GEO_TX_POWER_LIMIT iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[0] Band[0]: chain A = 68 chain B = 69 max_tx_power = 54 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[0] Band[1]: chain A = 48 chain B = 49 max_tx_power = 70 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[1] Band[0]: chain A = 51 chain B = 67 max_tx_power = 50 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[1] Band[1]: chain A = 69 chain B = 70 max_tx_power = 68 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[2] Band[0]: chain A = 49 chain B = 50 max_tx_power = 48 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[2] Band[1]: chain A = 52 chain B = 53 max_tx_power = 51 Cc: stable@vger.kernel.org # 4.12+ Fixes: a6bff3cb19b7 ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table") Signed-off-by: Matt Chen <matt.chen@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01iwlwifi: mvm: don't use SAR Geo if basic SAR is not usedLuca Coelho1-8/+28
commit 5d041c46ccb9b48acc110e214beff5e2789311df upstream. We can't use SAR Geo if basic SAR is not enabled, since the SAR Geo tables define offsets in relation to the basic SAR table in use. To fix this, make iwl_mvm_sar_init() return one in case WRDS is not available, so we can skip reading WGDS entirely. Fixes: a6bff3cb19b7 ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01iwlwifi: mvm: fix regulatory domain update when the firmware startsEmmanuel Grumbach2-5/+8
commit 82715ac71e6b94a2c2136e31f3a8e6748e33aa8c upstream. When the firmware starts, it doesn't have any regulatory information, hence it uses the world wide limitations. The driver can feed the firmware with previous knowledge that was kept in the driver, but the firmware may still not update its internal tables. This happens when we start a BSS interface, and then the firmware can change the regulatory tables based on our location and it'll use more lenient, location specific rules. Then, if the firmware is shut down (when the interface is brought down), and then an AP interface is created, the firmware will forget the country specific rules. The host will think that we are in a certain country that may allow channels and will try to teach the firmware about our location, but the firmware may still not allow to drop the world wide limitations and apply country specific rules because it was just re-started. In this case, the firmware will reply with MCC_RESP_ILLEGAL to the MCC_UPDATE_CMD. In that case, iwlwifi needs to let the upper layers (cfg80211 / hostapd) know that the channel list they know about has been updated. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201105 Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01iwlwifi: mvm: support sta_statistics() even on older firmwareEmmanuel Grumbach1-4/+0
commit ec484d03ef0df8d34086b95710e355a259cbe1f2 upstream. The oldest firmware supported by iwlmvm do support getting the average beacon RSSI. Enable the sta_statistics() call from mac80211 even on older firmware versions. Fixes: 33cef9256342 ("iwlwifi: mvm: support beacon statistics for BSS client") Cc: stable@vger.kernel.org # 4.2+ Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13iwlwifi: mvm: check return value of rs_rate_from_ucode_rate()Luca Coelho1-5/+19
commit 3d71c3f1f50cf309bd20659422af549bc784bfff upstream. The rs_rate_from_ucode_rate() function may return -EINVAL if the rate is invalid, but none of the callsites check for the error, potentially making us access arrays with index IWL_RATE_INVALID, which is larger than the arrays, causing an out-of-bounds access. This will trigger KASAN warnings, such as the one reported in the bugzilla issue mentioned below. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=200659 Cc: stable@vger.kernel.org Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13iwlwifi: mvm: fix BAR seq ctrl reportingSara Sharon1-4/+5
[ Upstream commit 941ab4eb66c10bc5c7234e83a7a858b2806ed151 ] There is a bug in FW where the sequence control may be incorrect, and the driver overrides it with the value of the ieee80211 header. However, in BAR there is no sequence control in the header, which result with arbitrary sequence. This access to an unknown location is bad and it makes the logs very confusing - so fix it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13iwlwifi: mvm: clear HW_RESTART_REQUESTED when stopping the interfaceEmmanuel Grumbach1-3/+6
[ Upstream commit 155f7e0441cd121b1e673d465a35e99f4b9b2f0b ] Fix a bug that happens in the following scenario: 1) suspend without WoWLAN 2) mac80211 calls drv_stop because of the suspend 3) __iwl_mvm_mac_stop deallocates the aux station 4) during drv_stop the firmware crashes 5) iwlmvm: * sets IWL_MVM_STATUS_HW_RESTART_REQUESTED * asks mac80211 to kick the restart flow 6) mac80211 puts the restart worker into a freezable queue which means that the worker will not run for now since the workqueue is already frozen 7) ... 8) resume 9) mac80211 runs ieee80211_reconfig as part of the resume 10) mac80211 detects that a restart flow has been requested and that we are now resuming from suspend and cancels the restart worker 11) mac80211 calls drv_start() 12) __iwl_mvm_mac_start checks that IWL_MVM_STATUS_HW_RESTART_REQUESTED clears it, sets IWL_MVM_STATUS_IN_HW_RESTART and calls iwl_mvm_restart_cleanup() 13) iwl_fw_error_dump gets called and accesses the device to get debug data 14) iwl_mvm_up adds the aux station 15) iwl_mvm_add_aux_sta() allocates an internal station for the aux station 16) iwl_mvm_allocate_int_sta() tests IWL_MVM_STATUS_IN_HW_RESTART and doesn't really allocate a station ID for the aux station 17) a new queue is added for the aux station Note that steps from 5 to 9 aren't really part of the problem but were described for the sake of completeness. Once the iwl_mvm_mac_stop() is called, the device is not accessible, meaning that step 12) can't succeed and we'll see the following: drivers/net/wireless/intel/iwlwifi/pcie/trans.c:2122 iwl_trans_pcie_grab_nic_access+0xc0/0x1d6 [iwlwifi]() Timeout waiting for hardware access (CSR_GP_CNTRL 0x080403d8) Call Trace: [<ffffffffc03e6ad3>] iwl_trans_pcie_grab_nic_access+0xc0/0x1d6 [iwlwifi] [<ffffffffc03e6a13>] iwl_trans_pcie_dump_regs+0x3fd/0x3fd [iwlwifi] [<ffffffffc03dad42>] iwl_fw_error_dump+0x4f5/0xe8b [iwlwifi] [<ffffffffc04bd43e>] __iwl_mvm_mac_start+0x5a/0x21a [iwlmvm] [<ffffffffc04bd6d2>] iwl_mvm_mac_start+0xd4/0x103 [iwlmvm] [<ffffffffc042d378>] drv_start+0xa1/0xc5 [iwl7000_mac80211] [<ffffffffc045a339>] ieee80211_reconfig+0x145/0xf50 [mac80211] [<ffffffffc044788b>] ieee80211_resume+0x62/0x66 [mac80211] [<ffffffffc0366c5b>] wiphy_resume+0xa9/0xc6 [cfg80211] The station id of the aux station is set to 0xff in step 3 and because we don't really allocate a new station id for the auxliary station (as explained in 16), we end up sending a command to the firmware asking to connect the queue to station id 0xff. This makes the firmware crash with the following information: 0x00002093 | ADVANCED_SYSASSERT 0x000002F0 | trm_hw_status0 0x00000000 | trm_hw_status1 0x00000B38 | branchlink2 0x0001978C | interruptlink1 0x00000000 | interruptlink2 0xFF080501 | data1 0xDEADBEEF | data2 0xDEADBEEF | data3 Firmware error during reconfiguration - reprobe! FW error in SYNC CMD SCD_QUEUE_CFG Fix this by clearing IWL_MVM_STATUS_HW_RESTART_REQUESTED in iwl_mvm_mac_stop(). We won't be able to collect debug data anyway and when we will brought up again, we will have a clean state from the firmware perspective. Since we won't have IWL_MVM_STATUS_IN_HW_RESTART set in step 12) we won't get to the 2093 ASSERT either. Fixes: bf8b286f86fc ("iwlwifi: mvm: defer setting IWL_MVM_STATUS_IN_HW_RESTART") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-04iwlwifi: mvm: check for short GI only for OFDMSara Sharon2-2/+5
[ Upstream commit 4c59ff5a9a9c54cc26c807dc2fa6933f7e9fa4ef ] This bit will be used in CCK to indicate short preamble. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-05-30iwlwifi: mvm: check if mac80211_queue is valid in iwl_mvm_disable_txqLuca Coelho1-2/+9
[ Upstream commit 9a233bb8025105db9a60b5d761005cc5a6c77f3d ] Sometimes iwl_mvm_disable_txq() may be called with mac80211_queue == IEEE80211_INVAL_HW_QUEUE, and this would cause us to use BIT(0xFF) which is way too large for the u16 we used to store it in hw_queue_to_mac820211. If this happens the following UBSAN warning will be generated: [ 167.185167] UBSAN: Undefined behaviour in drivers/net/wireless/intel/iwlwifi/mvm/utils.c:838:5 [ 167.185171] shift exponent 255 is too large for 64-bit type 'long unsigned int' Fix that by checking that it is not IEEE80211_INVAL_HW_QUEUE and, while at it, add a warning if the queue number is larger than IEEE80211_MAX_QUEUES. Fixes: 34e10860ae8d ("iwlwifi: mvm: remove references to queue_info in new TX path") Reported-by: Paul Menzel <pmenzel+linux-wireless@molgen.mpg.de> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: fix array out of bounds referenceAvraham Stern1-27/+11
[ Upstream commit 4a6d2e525b43eba5870ea7e360f59aa65de00705 ] When starting aggregation, the code checks the status of the queue allocated to the aggregation tid, which might not yet be allocated and thus the queue index may be invalid. Fix this by reserving a new queue in case the queue id is invalid. While at it, clean up some unreachable code (a condition that is already handled earlier) and remove all the non-DQA comments since non-DQA mode is no longer supported. Fixes: cf961e16620f ("iwlwifi: mvm: support dqa-mode agg on non-shared queue") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: make sure internal station has a valid idAvraham Stern1-1/+2
[ Upstream commit df65c8d1728adee2a52c30287d33da83a8c87480 ] If the driver failed to resume from D3, it is possible that it has no valid aux station. In such case, fw restart will end up in sending station related commands with an invalid station id, which will result in an assert. Fix this by allocating a new station id for the aux station if it does not have a valid id even in the case of fw restart. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: clear tx queue id when unreserving aggregation queueAvraham Stern1-4/+8
[ Upstream commit 4b387906b1c3692bb790388c335515c0cf098a23 ] When a queue is reserved for aggregation, the queue id is assigned to the tid_data. This is fine since iwl_mvm_sta_tx_agg_oper() takes care of allocating the queue before actual tx starts. When the reservation is cancelled (e.g. when the AP declined the aggregation request) the tid_data is not cleared. As a result, following tx for this tid was trying to use an unallocated queue. Fix this by setting the txq_id for the tid to invalid when unreserving the queue. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: Increase session protection time after CSAndrei Otcheretianski3-8/+15
[ Upstream commit 19125cb0591ae63cd4591e3dfe4c22058e748518 ] After switching to a new channel, driver schedules session protection time event in order to hear the beacon on the new channel. The duration of the protection is two beacon intervals. However, since we start to switch slightly before beacon with count 1, in case we don't hear (or AP doesn't transmit) the very first beacon on the new channel the protection ends without hearing any beacon at all. At this stage the switch is not complete, the queues are closed and the interface doesn't have quota yet or TBTT events. As the result, we are stuck forever waiting for iwl_mvm_post_channel_switch() to be called. Fix this by increasing the protection time to be 3 beacon intervals and in addition drop the connection if the time event ends before we got any beacon. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: fix error checking for multi/broadcast staJohannes Berg1-2/+2
[ Upstream commit 75fd4fec3e4c43b131c7c4958adb3ab9f1665513 ] The earlier patch called the station add functions but didn't assign their return value to the ret variable, so that the checks for it were meaningless. Fix that. Found by smatch: .../mac80211.c:2560 iwl_mvm_start_ap_ibss() warn: we tested 'ret' before and it was 'false' .../mac80211.c:2563 iwl_mvm_start_ap_ibss() warn: we tested 'ret' before and it was 'false' Fixes: 3a89411cd31c ("iwlwifi: mvm: fix assert 0x2B00 on older FWs") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: Correctly set IGTK for APBeni Lev1-9/+12
[ Upstream commit e829b17caf96c2da34620e335fb777592990906c ] Currently when an IGTK is set for an AP, it is set as a regular key. Since the cipher is set to CMAC, the STA_KEY_FLG_EXT flag is added to the host command, which causes assert 0x253D on NICs that do not support this. Fixes: 85aeb58cec1a ("iwlwifi: mvm: Enable security on new TX API") Signed-off-by: Beni Lev <beni.lev@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: set the correct tid when we flush the MCAST staEmmanuel Grumbach1-6/+4
[ Upstream commit 334167decf98f01a66c91ea84180c278bc4ad290 ] The tid being used for the queue (cab_queue) for the MCAST station has been changed recently to be 0 (for BE). The flush path still flushed only the special tid (15) which means that the firmware wasn't flushing the right queue and we could get a firmware crash upon remove station if we had an MCAST packet on the ring. The current code that flushes queues for a station only differentiates between internal stations (stations that aren't instantiated in mac80211, like the MCAST station) and the non-internal ones. Internal stations can be either: BCAST (beacons), MCAST (for cab_queue), GENERAL_PURPOSE (p2p dev, and sniffer injection). The internal stations can use different tids. To make the code simpler, just flush all the tids always and add the special internal tid (15) for internal stations. The firmware will know how to handle this even if we hadn't any queue mapped that that tid. Fixes: e340c1a6ef4b ("iwlwifi: mvm: Correctly set the tid for mcast queue") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: Correctly set the tid for mcast queueIlan Peer1-3/+3
[ Upstream commit 6508de0305d560235b366cc2cc98f7bcfb029e92 ] In the scheduler config command, the meaning of tid == 0xf was intended to indicate the configuration is for management frames. However, tid == 0xf was also used for the multicast queue that was meant only for multicast data frames, which resulted with the FW not encrypting multicast data frames. As multicast frames do not have a QoS header, fix this by setting tid == 0, to indicate that this is a data queue and not management one. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: Direct multicast frames to the correct stationIlan Peer1-1/+5
[ Upstream commit 7c305de2b9548ab6b65fce342c78618bbed5db73 ] Multicast frames for NL80211_IFTYPE_AP and NL80211_IFTYPE_ADHOC were directed to the broadcast station, however, as the broadcast station did not have keys configured, these frames were sent unencrypted. Fix this by using the multicast station which is the station for which encryption keys are configured. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: fix "failed to remove key" messageSara Sharon1-1/+2
[ Upstream commit e4f13ad07823b24a1537518d2163bd164292fb10 ] When the GTK is installed, we install it to HW with the station ID of the AP. Mac80211 will try to remove it only after the AP sta is removed, which will result in a failure to remove key since we do not have any station for it. This is a valid situation, but a previous commit removed the early return and added a return with error value, which resulted in an error message that is confusing to users. Remove the error return value. Fixes: 85aeb58cec1a ("iwlwifi: mvm: Enable security on new TX API") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: avoid collecting firmware dump if not loadedShaul Triebitz2-3/+10
[ Upstream commit 8745f12a6600dd9d31122588621d4c8ddb332cd7 ] Trying to collect firmware debug data while firmware is not loaded causes various errors (e.g. failing NIC access). This causes even a bigger issue if at that time the HW radio is off. In that case, when later turning the radio on, the Driver fails to read the HW (registers contain garbage values). (It may be that the CSR_GP_CNTRL_REG_FLAG_RFKILL_WAKE_L1A_EN bit is cleared on faulty NIC access - since the same behavior was seen in HW RFKILL toggling before setting that bit.) Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: fix assert 0x2B00 on older FWsSara Sharon1-10/+35
[ Upstream commit 63dd5d022f4766e6b05ee611124afcc7cbfbb953 ] We should add the multicast station before adding the broadcast station. However, in older FW, the firmware will start beaconing when we add the multicast station, and since the broadcast station is not added at this point so the transmission of the beacon will fail on assert 0x2b00. This is fixed in later firmware, so make the order of addition depend on the TLV. Fixes: 26d6c16bed53 ("iwlwifi: mvm: add multicast station") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: Fix channel switch for count 0 and 1Andrei Otcheretianski1-2/+4
[ Upstream commit 40d53f4a60c9eb10d4fa58066c23ba1af8a59e39 ] It was assumed that apply_time==0 implies immediate scheduling, which is wrong. Instead, the fw expects the START_IMMEDIATELY flag to be set. Otherwise, this resulted in 0x3063 assert. Fix that. While at it rename the T2_V2_START_IMMEDIATELY to TE_V2_START_IMMEDIATELY. Fixes: f5d8f50f271d ("iwlwifi: mvm: Fix channel switch in case of count <= 1") Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: fix TX of CCMP 256Sara Sharon1-2/+5
[ Upstream commit de04d4fbf87b769ab18c480e4f020c53e74bbdd2 ] We don't have enough room in the TX command for a CCMP 256 key, and need to use key from table. Fixes: 3264bf032bd9 ("[BUGFIX] iwlwifi: mvm: Fix CCMP IV setting") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: always init rs with 20mhz bandwidth ratesNaftali Goldstein2-8/+24
[ Upstream commit 6b7a5aea71b342ec0593d23b08383e1f33da4c9a ] In AP mode, when a new station associates, rs is initialized immediately upon association completion, before the phy context is updated with the association parameters, so the sta bandwidth might be wider than the phy context allows. To avoid this issue, always initialize rs with 20mhz bandwidth rate, and after authorization, when the phy context is already up-to-date, re-init rs with the correct bw. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: fix IBSS for devices that support station type APISara Sharon2-13/+14
[ Upstream commit fc07bd8ce19bff9e7479c04077ddb5957d1a27be ] In IBSS, the mac80211 sets the cab_queue to be invalid. However, the multicast station uses it, so we need to override it. A previous patch did it, but it was nested inside the if's and was applied only for legacy FWs that don't support the new station type API, instead of being applied for all paths. In addition, add a missing NL80211_IFTYPE_ADHOC to the initialization of the queues in iwl_mvm_mac_ctxt_init() Fixes: ee48b72211f8 ("iwlwifi: mvm: support ibss in dqa mode") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iwlwifi: mvm: fix security bug in PN checkingSara Sharon1-19/+20
[ Upstream commit 5ab2ba931255d8bf03009c06d58dce97de32797c ] A previous patch allowed the same PN for packets originating from the same AMSDU by copying PN only for the last packet in the series. This however is bogus since we cannot assume the last frame will be received on the same queue, and if it is received on a different ueue we will end up not incrementing the PN and possibly let the next packet to have the same PN and pass through. Change the logic instead to driver explicitly indicate for the second sub frame and on to be allowed to have the same PN as the first subframe. Indicate it to mac80211 as well for the fallback queue. Fixes: f1ae02b186d9 ("iwlwifi: mvm: allow same PN for de-aggregated AMSDU") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24iwlwifi: add shared clock PHY config flag for some devicesLuca Coelho1-0/+4
commit 86a2b2043af79deff5cf000c5a08847faa4f2ee0 upstream. Some devices use a shared clock which is very sensitive to variations and cause trouble in some situations. We need to set a bit in the phy configuration to indicate that to the FW. To make this generic, add a extra_phy_config_flags element to the device configuration and OR it into the phy_cfg before sending it to the firmware. And also create a set of configurations for devices that use shared clocks and need this extra bit to be set. Fixes: c62446d2b028 ("iwlwifi: add new 9460 series PCI IDs") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-15 20:28:30 +0300