summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c
AgeCommit message (Collapse)AuthorFilesLines
2024-06-28wifi: mac80211: remove DEAUTH_NEED_MGD_TX_PREPJohannes Berg1-0/+2
This flag is annoying because it puts a lot of logic into mac80211 that could just as well be in the driver (only iwlmvm uses it) and the implementation is also broken for MLO. Remove the flag in favour of calling drv_mgd_prepare_tx() without any conditions even for the deauth-while-assoc case. The drivers that implement it can take the appropriate actions, which for the only user of DEAUTH_NEED_MGD_TX_PREP (iwlmvm) is a bit more tricky than the implementation in mac80211 is anyway, and all others have no need and can just exit if info->was_assoc is set. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240627132527.94924bcc9c9e.I328a219e45f2e2724cd52e75bb9feee3bf21a463@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-11Merge tag 'wireless-next-2024-06-07' of ↵Jakub Kicinski1-68/+77
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.11 The first "new features" pull request for v6.11 with changes both in stack and in drivers. Nothing out of ordinary, except that we have two conflicts this time: net/mac80211/cfg.c https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au drivers/net/wireless/microchip/wilc1000/netdev.c https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au Major changes: cfg80211/mac80211 * parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers wilc1000 * read MAC address during probe to make it visible to user space iwlwifi * bump FW API to 91 for BZ/SC devices * report 64-bit radiotap timestamp * enable P2P low latency by default * handle Transmit Power Envelope (TPE) advertised by AP * start using guard() rtlwifi * RTL8192DU support ath12k * remove unsupported tx monitor handling * channel 2 in 6 GHz band support * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support * dynamic VLAN support * add panic handler for resetting the firmware state ath10k * add qcom,no-msa-ready-indicator Device Tree property * LED support for various chipsets * tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits) wifi: ath12k: add hw_link_id in ath12k_pdev wifi: ath12k: add panic handler wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity() wifi: brcm80211: remove unused structs wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type) wifi: ath12k: do not process consecutive RDDM event dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup() wifi: rtlwifi: handle return value of usb init TX/RX wifi: rtlwifi: Enable the new rtl8192du driver wifi: rtlwifi: Add rtl8192du/sw.c wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg wifi: rtlwifi: Add rtl8192du/dm.{c,h} wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h} wifi: rtlwifi: Add rtl8192du/rf.{c,h} wifi: rtlwifi: Add rtl8192du/trx.{c,h} wifi: rtlwifi: Add rtl8192du/phy.{c,h} wifi: rtlwifi: Add rtl8192du/hw.{c,h} wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU wifi: rtlwifi: Add rtl8192du/table.{c,h} ... Signed-off-by: Jakub Kicinski <kuba@kernel.org> ==================== Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29wifi: iwlwifi: mvm: don't initialize csa_work twiceMiri Korenblit1-2/+0
The initialization of this worker moved to iwl_mvm_mac_init_mvmvif but we removed only from the pre-MLD version of the add_interface callback. Remove it also from the MLD version. Fixes: 0bcc2155983e ("wifi: iwlwifi: mvm: init vif works only once") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240512152312.4f15b41604f0.Iec912158e5a706175531d3736d77d25adf02fba4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: add debug data for MPDU countingMiri Korenblit1-0/+2
It is hard to debug issues of EMLSR entry/exit due to low throughput. Add debug data. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240527190228.77ef3c2654dc.I1796a3995da2a49dd5102d33766af1ad416dd60b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: handle TPE advertised by APJohannes Berg1-9/+46
6 GHz BSS SP client shall respect TX power limits advertised by the AP in TPE elements, send the data to the firmware using the AP_TX_POWER_CONSTRAINTS_CMD command, so do that. Co-developed-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240527190228.32f1e2e1447c.I58ac91c38585362aa42bb4a8a59c7d88e67bc40b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: iwlwifi: mvm: add mvm-specific guardJohannes Berg1-59/+29
Add and use an mvm-specific guard for the mvm mutex. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512152312.7391425b3af2.I1b109f56753dd3f35602dd2c5cf6e1e35aee313d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: fix primary link settingMiri Korenblit1-1/+1
mvmvif::primary link holds the ID and not a bitmap. Fix this Fixes: 07bf5297d392 ("wifi: iwlwifi: mvm: Implement new link selection algorithm") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240506095953.779bf6949053.Ia9297991ff2fdc82ae7c730e0069e2dd6e5f2902@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is activeYedidya Benshimol1-0/+16
When there's an active link in a non-station vif, the station vif is not allowed to enter EMLSR Note that blocking EMLSR by calling iwl_mvm_block_esr() we will schedule an exit from EMLSR worker, but the worker cannot run before the activation of the non-BSS link, as ieee80211_remain_on_channel already holds the wiphy mutex. Handle that by explicitly calling ieee80211_set_active_links() to leave EMLSR, and then doing iwl_mvm_block_esr() only for consistency and to avoid re-entering it before ready. Note that a call to ieee80211_set_active_links requires to release the mvm mutex, but that's ok since we still hold the wiphy lock. The only thing that might race here is the ESR_MODE_NOTIF, so this changes its handler to run under the wiphy lock. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.916193759f8a.Idf3a3caf5cdc3e69c81710b7ceb57e87f2de87e4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: exit EMLSR when CSA happensJohannes Berg1-1/+40
If CSA is happening, then exit EMLSR to keep the better link, which is the primary link unless that's doing the CSA with quiet. This is done because we can't transmit the OMN frame on a quiet link, but want to exit EMLSR during CSA for better beacon reception, so we can follow the switch accurately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.3ffff9577f08.I2620971fa5aef789e0d4a588def4c2621e8bed5b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Disable/enable EMLSR due to link's bandwidth/bandYedidya Benshimol1-0/+27
Enable EMLSR when bandwidth settings meet the criteria in both band and width, otherwise disable. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.4e473d4f7f5c.I3adf5619b60bfba8af0cd7eae9dac947419603b6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: trigger link selection upon TTLM start/endMiri Korenblit1-0/+5
When non default TTLM is applied, mac80211 may force us to use a specific link (For example, if the only active link becomes a dormant link, mac80211 will pick the first usable link and set it as active). When default TTLM is applied, we have new usable links that we might want to select. Therefore, trigger MLO scan and link selection upon change in TTLM. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Link: https://msgid.link/20240505091420.ed2b386566a8.I0168e61da86b2027633743aaf5d97e483991f0dc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Activate EMLSR based on traffic volumeMiri Korenblit1-0/+34
Adjust EMLSR activation to account for traffic levels. By tracking the number of RX/TX MPDUs, EMLSR will be activated only when traffic volume meets the required threshold. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.9480f99ac8fc.If9eb946e929a39e10fe5f4638bc8bc3f8976edf1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Always allow entering EMLSR from debugfsMiri Korenblit1-9/+4
EMLSR can't be activated from mac80211. Except for the debugfs, which is intended for testing purposes. Currently we don't allow entering EMLSR from debugfs if EMLSR is blocked, i.e. if mvmvif::esr_disable_reason is not 0. But we need a way to activate EMLSR regardless of the vif being blocked, for testing. Remove the check of esr_disable_reason Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.bc3c24d9e0e6.Iad60e22a0d7e2b2b989051e1140b6dc98bef7bcc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: cleanup EMLSR when BT is active handlingMiri Korenblit1-1/+1
BT Coex disables EMLSR only for a 2.4 GHz link, but doesn't block the vif from using EMLSR with a different link pair. In addition, storing it in mvmvif:disable_esr_reason requires extracting the BT Coex bit before checking if EMLSR is blocked or not for a specific vif. Therefore, change the BT Coex bit to be an exit reason and not a blocker. On link selection, EMLSR mode will be re-calculated for the 2.4 GHz link instead of checking that bit. While at it, move the relevant function declarations to the EMLSR functions area in mvm.h Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.a2e93b67c895.I183a0039ef076613144648cc46fbe9ab3d47c574@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: get periodic statistics in EMLSRMiri Korenblit1-0/+6
In EMLSR we need to track the RSSI of both links, and exit if the RSSI of one of the links got too low. For that request the FW to send statistics every 5 seconds when in EMLSR. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.6e19d596d77f.Ica2a75a031b1bced0dc2e18c5d365b5eb0d3ec07@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: don't recompute EMLSR mode in can_activate_linksMiri Korenblit1-26/+3
mac80211 invokes the driver callback drv_can_activate_links() from ieee80211_set_active_links to verify it can activate the desired link combination. However, ieee80211_set_active_links is called with more than one link in 2 cases: - After driver's link selection decided to enter EMLSR - From debugfs, for testing purposes. For both cases there is no need to recompute all the considerations determining whether to activate EMLSR. Instead, only check if the vif is not blocked for EMLSR. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.202cf5a9ef2c.I65e4698b730a8652ad8d1c01420aabb41a1d04fd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: init vif works only onceJohannes Berg1-0/+2
It's dangerous to re-initialize works repeatedly, especially delayed ones that have an associated timer, and even more so if they're not necessarily canceled inbetween. This can be the case for these workers here during FW restart scenarios, so make sure to initialize it only once. While at it, also ensure it is cancelled correctly. Fixes: f67806140220 ("iwlwifi: mvm: disconnect in case of bad channel switch parameters") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.ddf8eece5eac.I4164f5c9c444b64a9abbaab14c23858713778e35@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: Add helper functions to update EMLSR statusMiri Korenblit1-23/+1
There are reasons for which we need to exit EMLSR, but not to block it completely, and there are reasons for which we need to block EMLSR. For both reason types we have the enum iwl_mvm_esr_state, when the blocking reasons are stored in the `mvmvif::esr_disable_reason` bitmap. This change introduces the APIs to use in the different cases: - iwl_mvm_exit_esr - will exit from EMLSR mode. - iwl_mvm_block_esr - will update the bitmap and exit EMLSR, to be used for the blocking reasons only. - iwl_mvm_unblock_esr - will update the bitmap. To be used for the blocking reasons only. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.d54142a75876.I552926065521f5f848c37b0bd845494bd7865fb7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: Implement new link selection algorithmMiri Korenblit1-15/+22
Replaces the current logic with a new algorithm based on the link grading introduced in a previous patch. The new selection algorithm will be invoked upon successful scan to ensure it has the necessary updated data it needs. This update delegates the selection logic as the primary link determiner in EMLSR mode, storing it in mvmvif to avoid repeated calculations, as the result may vary. Additionally, includes tests for iwl_mvm_valid_link_pair to validate link pairs for EMLSR. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.309fb1b3fe44.I5baf0c293c89a5a28bd1a6386bf9ca6d2bf61ab8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: move EMLSR/links codeMiri Korenblit1-216/+24
The functions that are link related, so they should be in link.c and not in mld-mac80211.c. Move them. Also move the different prototypes to the right place in mvm.h Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.e7c368256fa0.I6b15805a7c8a75d1814f1a829601daf4d3788731@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: check if EMLSR is allowed before selecting linksMiri Korenblit1-16/+28
Currenty iwl_mvm_mld_select_links() doesn't fully check that EMLSR is allowed before selecting the 2 best links. Although it will fail in ieee80211_set_active_links(), it is preferred to avoid the redundent calculations. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.3578a93feb1a.I1cd91608bb73fbe19b8dfdf90e14ce40b98c3430@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: don't always disable EMLSR due to BT coexMiri Korenblit1-37/+52
2.4 GHz/LB (low band) link can't be used in an EMLSR links pair when BT is on. But EMLSR is still allowed for a pair of links which none of them operates in LB. In the existing code, EMLSR will always be disabled if one of the usable links is in LB (and BT is on). Move this check to the code that verifies a specific pair of links, and only if one of these links operates on LB - disable EMLSR. Fixes: 10159a45666b ("wifi: iwlwifi: disable eSR when BT is active") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.2841006b5cc4.I45ffd583f593daa950322852ceb9454cbf497e24@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: calculate EMLSR mode after connectionMiri Korenblit1-9/+4
The function iwl_mvm_can_enter_esr() is (among others) calculating if EMLSR mode is disabled due to BT coex by calling iwl_mvm_bt_coex_calculate_esr_mode(), then stores the decision in mvmvif::esr_disable_reason. But there is no need to calculate this every time iwl_mvm_can_enter_esr is called. Fix this by calculating it once after authorization, and in iwl_mvm_can_enter_esr only check mvmvif::esr_disable_reason. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.a767e243366e.I3b32d36cda23f67dc103a28a9bdccb0039d22574@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: send ap_tx_power_constraints cmd to FW in AP modeMukesh Sisodiya1-0/+50
Send AP_TX_POWER_CONSTRAINTS_CMD with no local maximum transmit power constraint to FW and FW will update the TPE element with required tx power limits. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.b6af4ecfcfe8.I07e8db349190e0c58c468c18477d8551288ac069@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: introduce esr_disable_reasonEmmanuel Grumbach1-1/+28
This will maintain a bitmap of reasons for which we want to avoid enabling EMLSR. For now, we have a single reason: BT coexistence, but we will add soon more reasons. Make it a bitmap to make it easier to manage. Since we'll impact the parameters that impact the enablement / disablement of EMLSR from several places, introduce a generic function that takes into account the current state and execute the decision that must be taken. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.94c3590c6f27.I6a190da5025d0523ef483ffac0c64e26675041e6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: iwlwifi: reconfigure TLC during HW restartJohannes Berg1-6/+1
Since the HW restart flow with multi-link is very similar to the initial association, we do need to reconfigure TLC there. Remove the check that prevented that. Fixes: d2d0468f60cd ("wifi: iwlwifi: mvm: configure TLC on link activation") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240320232419.a00adcfe381a.Ic798beccbb7b7d852dc976d539205353588853b0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctlyJohannes Berg1-0/+3
Clearly, I put this flag into the wrong place: devices using the code in mac80211.c only do not support EHT, so this isn't even relevant. Fix this by moving the code to the right function. Fixes: 32a5690e9acb ("wifi: iwlwifi: mvm: support wider-bandwidth OFDMA") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240320232419.0d5fb0e971e4.I3b67c5e0ddcbe6e58143ec0bc4e40dd6dba4f863@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: iwlwifi: mvm: fix active link counting during recoveryBenjamin Berg1-12/+8
During recovery, the chanctx_conf in mac80211 is still non-NULL even though the channel context has not yet been assigned again. In that case, the real count is actually lower. Switch to instead count the phy_ctx assignment and ensure that the assignment is cleared at the start of recovery. Fixes: 12bacfc2c065 ("wifi: iwlwifi: handle eSR transitions") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240320232419.55f37339e7d1.I57006568a90ffb7a1232def1b2f3264dea711ba6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-12wifi: iwlwifi: mvm: check own capabilities for EMLSRJohannes Berg1-0/+7
There may be different hardware or configurations supported, so check for our own EMLSR capability before allowing it to be used, in addition to checking the AP's. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240208185302.036443611696.If33caabd7cf372834287863b40b2d6d1ef1ca3f7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: iwlwifi: mvm: remove flags for enable/disable beacon filterJohannes Berg1-1/+1
The flags argument to enable/disable beacon filtering functions is unused and always zero, so just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240206175739.2c739c1034a5.I8619949ad4ebd31593d10ece371ebdc6c48db98f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: cfg80211/mac80211: move puncturing into chandefJohannes Berg1-3/+3
Aloka originally suggested that puncturing should be part of the chandef, so that it's treated correctly. At the time, I disagreed and it ended up not part of the chandef, but I've now realized that this was wrong. Even for clients, the RX, and perhaps more importantly, CCA configuration needs to take puncturing into account. Move puncturing into the chandef, and adjust all the code accordingly. Also add a few tests for puncturing in chandef compatibility checking. Link: https://lore.kernel.org/linux-wireless/20220214223051.3610-1-quic_alokad@quicinc.com/ Suggested-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://msgid.link/20240129194108.307183a5d2e5.I4d7fe2f126b2366c1312010e2900dfb2abffa0f6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: mac80211: introduce 'channel request'Johannes Berg1-5/+5
For channel contexts, mac80211 currently uses the cfg80211 chandef struct (control channel, center freq(s), width) to define towards drivers and internally how these behave. In fact, there are _two_ such structs used, where the min_def can reduce bandwidth according to the stations connected. Unfortunately, with EHT this is longer be sufficient, at least not for all hardware. EHT requires that non-AP STAs that are connected to an AP with a lower bandwidth than it (the AP) advertises (e.g. 160 MHz STA connected to 320 MHz AP) still be able to receive downlink OFDMA and respond to trigger frames for uplink OFDMA that specify the position and bandwidth for the non-AP STA relative to the channel the AP is using. Therefore, they need to be aware of this, and at least for some hardware (e.g. Intel) this awareness is in the hardware. As a result, use of the "same" channel may need to be split over two channel contexts where they differ by the AP being used. As a first step, introduce a concept of a channel request ('chanreq') for each interface, to control the context it requests. This step does nothing but reorganise the code, so that later the AP's chandef can be added to the request in order to handle the EHT case described above. Link: https://msgid.link/20240129194108.2e88e48bd2e9.I4256183debe975c5ed71621611206fdbb69ba330@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08Merge wireless into wireless-nextJohannes Berg1-4/+5
There are some changes coming to wireless-next that will otherwise cause conflicts, pull wireless in first to be able to resolve that when applying the individual changes rather than having to do merge resolution later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: iwlwifi: exit eSR only after the FW doesMiri Korenblit1-3/+3
Currently the driver exits eSR by calling iwl_mvm_esr_mode_inactive() before updating the FW (by deactivating one of the links), and therefore before sending the EML frame notifying that we are no longer in eSR. This is wrong for several reasons: 1. The driver sends SMPS activation frames when we are still in eSR and SMPS should be disabled when in eSR 2. The driver restores RLC configuration as it was before eSR entering, and RLC command shouldn't be sent in eSR Fix this by calling iwl_mvm_esr_mode_inactive() after FW update Fixes: 12bacfc2c065 ("wifi: iwlwifi: handle eSR transitions") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://msgid.link/20240201155157.d8d9dc277d4e.Ib5aee0fd05e35b1da7f18753eb3c8fa0a3f872f3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: iwlwifi: mvm: check AP supports EMLSRJohannes Berg1-0/+3
Before using EMLSR check the AP actually advertises support for it, otherwise reject the link activation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240131091413.edaac352488d.Ic3533afc6848591e8977391ae39c144d5e794d26@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: iwlwifi: mvm: add support for TID to link mapping neg requestAyala Beker1-0/+19
Add support for handling TID to link mapping negotiation request and decide whether to accept it or not. Accept the request if all TIDs are mapped to the same link set, otherwise reject it. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240129211905.aab9819c378d.Icf6b79a362763e2e8b85959471f303b586617242@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: iwlwifi: disable eSR when BT is activeMiri Korenblit1-1/+106
eSR should be disabled when BT Coex is active and: - LB link is the primary link. - LB link is the secondary link and the predicted BT penalty (the wifi loss rate caused by BT interference) is higher than a given threshold. If one of the conditions above is no longer true then re-enable eSR. In order to implement this, add support for version 5 of BT_PROFILE_NOTIFICATION, in which the bt penalty is provided by FW. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://msgid.link/20240131225342.b922b6485af8.I7d808ce535a7372aca9cb85c045755e6788a4904@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26wifi: iwlwifi: mvm: skip adding debugfs symlink for reconfigBenjamin Berg1-1/+2
The function to add an interface may be called without a previous removal if the HW is being reconfigured. As such, only add the symlink if the hardware is not being reconfigured due to a HW_RESTART. Fixes: c36235acb34f ("wifi: iwlwifi: mvm: rework debugfs handling") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240123200528.314395eacda4.I5823e962c3c3674b942383733debd10b3fe903e2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26wifi: iwlwifi: implement can_activate_links callbackMiri Korenblit1-8/+10
This callback checks if a given bitmap of active_links will be supported by the driver or not. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240123200528.a26fd48bfe3d.I03ae6b4c7fd24e8701660a68cec9403dc3469a0e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: assign phy_ctxt before eSR activationMiri Korenblit1-3/+3
eSR is activated when a chanctx is assigned to more than one link. During eSR activation we should disable RLC for both phys, and configure the FW with a special phy command for both phys. Currently we assign the phy_ctxt to the link only after eSR activation, so RLC is not disabled for the new phy_ctxt, and a cmd is not sent to FW. Fix this by first assigning the new phy_ctxt to the link and then doing the eSR activation. Fixes: 12bacfc2c065 ("wifi: iwlwifi: handle eSR transitions") Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.3d94507f5d9a.I537fcd73aedf94c7348c03157e486f24301fef14@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: Do not warn if valid link pair was not foundIlan Peer1-1/+1
It is possible that though multiple links are enabled we cannot enabled EMLSR enable more than a single link, e.g., all valid links are on the same band etc. Thus, do not warn in case no valid link pair is found. Fixes: b9be67fb4207 ("wifi: iwlwifi: mvm: Add basic link selection logic") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.142e57a05230.I7cfe78c94c3d15c4c744bccadd8f187e43594932@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: cycle FW link on chanctx removalJohannes Berg1-0/+7
When the vif is in MLD mode, we'll get a vif links change from non-zero to zero on disassociation, which removes all links in the firmware and adds the 'deflink' the driver/mac80211 has. This causes the firmware to clear some internal state. However, in non-MLD mode, this doesn't happen, and causes some state to be left around in firmware, which can particularly cause trouble with the ref-BSSID in multi-BSSID, leading to an assert later if immediately making a new multi-BSSID connection with a different ref-BSSID. Fix this by removing/re-adding the link in the non-MLD case when the channel is removed from the vif. This way, all of the state will get cleared out, even if we need the deflink, which is more for software architecture purposes than otherwise. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231022173519.90c82837ba4d.I341fa30c480f7673b14b48a0e29a2241472c2e13@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: implement new firmware API for statisticsAnjaneyulu1-2/+4
The new firmware API uses a new command and notification, the command configures in which statistics types driver is interested and the notification is sent periodically. An additional change in the API is that most of the statistics data is accumulated and reported by the firmware per MLO link. Implement new command and notification handlers and adjust to per-link statistics. Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231022173519.8cc7df0ebff2.If1dcb57145841c5b3c68ed112bbfcd0201f7acc3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: remove set_tim callback for MLD opsJohannes Berg1-2/+0
In new firmware, we don't need this any more and it won't be called any more by mac80211, since powersave handling is all done by firmware. Remove it from the MLD ops. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.1a1ded96ffc2.Ie49d3004acdd6299fb84346c76b2b2b2f195196b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: make time_events MLO awareMiri Korenblit1-1/+7
As session protection API is moving to be per link instead of per mac, move the time events to be per link too. Since there is only one concurrent time event per mac, it feels unnecessary to have the time_event as a member of iwl_mvm_link_info. (That way we will have to iterate over all links each time we want to clear a time event, and also we will need mac80211 to tell us the link id when mgd_tx_complete() is called.) So leave this as a member of iwl_mvm_vif, but add the link id to the time_event structure. The link id in time_event will only be maintained and used for: 1. When SESSION_PROTECTION_CMD is supported (before it, we don't have MLO) 2. For time_events of types SESSION_PROTECT_CONF_ASSOC, SESSION_PROTECT_CONF_P2P_DEVICE_DISCOV, and SESSION_PROTECT_CONF_P2P_GO_NEGOTIATION (not for aux roc/ Hot Spot time_events). For P2P, non-MLO connections, and pre-MLD API, deflink id, meaning 0, will be used Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.21496bcacb18.I79d037325b4fae4c12a22d9477e53fc9c537ad46@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: Correctly set link configurationIlan Peer1-1/+1
In case the link puncturing is changed such that the channel is no longer punctured, configure the FW correctly indicating the EHT parameters changed (with a 0 punctured map). Allow EHT parameters configuration only when the link really supports EHT. Fixes: 55eb1c5fa4b2 ("wifi: iwlwifi: mvm: add support for the new LINK command") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.2666ef86e032.I4b0e95722660acc5345ceefba7e8866a69572e8e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: Don't always bind/link the P2P Device interfaceIlan Peer1-68/+32
It is not necessary to keep the P2P Device bound/linked to a PHY context when there is no active ROC. Modify the P2P Device flows so the binding/linking would be done only while ROC is active. With this change the switch_phy_ctxt() is no longer needed so remove it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.c5b83b4bf9de.Ia80daf3ba0b5fec7d0919247fcbdbdb58bddf02b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: Add basic link selection logicIlan Peer1-0/+123
Add simple logic that would allow using EMLSR in case there are multiple valid links: - In case the connection establishment has just been completed try to find a valid link pair for EMLSR functionality where one of the links in the pair is the current active link. - In case the valid links changed after connection was already established, try to find a valid link pair for EMLSR functionality, in case the EMSLR is not active yet. If a valid link pair is found call mac80211 to asynchronously set the new link pair, otherwise continue using the current active links. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.0c7b89ab29c2.I6600bd16551d75e2bf520d8d0add525568a9f85f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: add a per-link debugfsMiri Korenblit1-0/+1
Add a per-link debugfs entry in iwlmvm level so we can read/write link related parameters. Do it by implementing the link_add_debugfs API introduced by mac80211. Each entry will have a path like this: .../netdev:wlan0/link-X/iwlmvm/<file_name> for each link X. For non-MLD vifs this callback is called when the original vif debugfs dir is also created, so handle that case by not creating the 'iwlmvm' directory again. Note that we don't have to worry about the cleaning the iwlmvm/* directory as it is already done by mac80211 when removing the link (or netdev). Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.6a161f021ae8.Ic8f40f2b4682270c94036e3c11c3996ae34266fa@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: rework debugfs handlingJohannes Berg1-2/+3
mac80211 added a new callback to add a vif debugfs. Implement it instead of adding the debugfs directly, which will make it properly preserved over switching the vif from non-MLD/MLD and back. This requires some rework so that we still have the symlink but trust mac80211 to add/remove the debugfs. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.818810e242e6.I805a28f9fbef5c52a3a575d04e7a6a909ecf9078@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-05 23:11:25 +0300