summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
AgeCommit message (Collapse)AuthorFilesLines
2020-10-08iwlwifi: mvm: fix suspicious rcu usage warningsSara Sharon1-7/+13
mvm mutex isn't held by iwl_mvm_set_aes_rx_seq or it caller. iee80211_local->key_mtx is held, but that is internal to mac80211. The same applies to iwl_mvm_wowlan_program_keys. Just hold rcu_read_lock, even though we are protected, the penalty isn't that bad. Warnings fixed are: [ 4143.788196] WARNING: suspicious RCU usage [ 4143.788211] ----------------------------- [ 4143.788220] suspicious rcu_dereference_protected() usage! [ 4143.788227] [ 4143.788234] rcu_scheduler_active = 2, debug_locks = 1 [ 4143.788242] 5 locks held by kworker/u8:9/5921: [ 4143.788331] #4: ffff88804e69ad08 (&local->key_mtx){+.+.}, at ie80211_iter_keys+0x46/0x380 [mac80211] [ 4143.788441] [ 4143.788441] Call Trace: [ 4143.788455] dump_stack+0xc1/0x11a [ 4143.788471] lockdep_rcu_suspicious+0x14a/0x153 [ 4143.788515] iwl_mvm_set_aes_rx_seq+0x4a9/0x570 [iwlmvm] [ 4143.788657] iwl_mvm_d3_update_keys+0x2ac/0x600 [iwlmvm] [ 4143.788784] ieee80211_iter_keys+0x10e/0x380 [mac80211] [ 4143.788838] iwl_mvm_setup_connection_keep+0x287/0x8d0 [iwlmvm] [ 7243.206556] WARNING: suspicious RCU usage [ 7243.206811] ----------------------------- [ 7243.206926] /suspicious rcu_dereference_protected() usage! [ 7243.207086] [ 7243.207204] rcu_scheduler_active = 2, debug_locks = 1 [ 7243.207321] 2 locks held by cat/15952: [ 7243.207564] #1: ffff888008c8ad08 (&local->key_mtx){+.+.}, at: ieee80211_iter_keys+0x46/0x380 [mac80211] [ 7243.207751] [ 7243.208094] Call Trace: [ 7243.208211] dump_stack+0xc1/0x11a [ 7243.208355] lockdep_rcu_suspicious+0x14a/0x153 [ 7243.208509] iwl_mvm_wowlan_program_keys+0x1db7/0x2340 [iwlmvm] [ 7243.209852] ieee80211_iter_keys+0x10e/0x380 [mac80211] Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.65872d5f1670.I0b2fb2a65904ae686c3c7c05f881a1e3634dc900@changeid
2020-10-08iwlwifi: mvm: remove memset of kek_kck commandSara Sharon1-1/+0
iwl_mvm_wowlan_program_keys is now setting data directly in the KEK_KCK command, and the memset is clearing this later, causing the data to be incomplete. Just remove the memory clearing, the structure is local and cleared in the declaration. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.0f355b4578c5.Ifbb76a2814925f215a2c889c1792d46d5bd66ab8@changeid
2020-10-01iwlwifi: mvm: d3: parse wowlan status version 11Johannes Berg1-54/+79
The firmware is being updated to report version 11 of this response in order to include BIGTK material. Parse it, but for now keep the existing behaviour of disconnecting on any rekeying with even IGTK presence, need to fix that before BIGTK can be supported. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200930191738.b7098f097a5c.I4ae1c5b2186b0e04702233a7a7068d69cfd3361a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-01iwlwifi: mvm: add d3 printsSara Sharon1-0/+13
This is long overdue - add a special WOWLAN flag, and D3 prints. It will ease debug and enable test automation. Use a new flag, instead of one that currently isn't used. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200930161256.2704e4c384c9.Ib738ffa2bc6ce635a855944a71a01fd6b82929a4@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-01iwlwifi: mvm: d3: support GCMP ciphersJohannes Berg1-0/+18
We really should support GCMP ciphers (both sizes) since all the handling is identical to CCMP, except for the one case where the key material is copied. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200930161256.ec44673fae83.I8a9232600b99e27213eb9ea69bf46e8d25d7f260@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-01iwlwifi: mvm: support more GTK rekeying algorithmsNathan Errera1-6/+23
add and use new API version for GTK rekeying. This will allow our firmware to do GTK rekeying for more algorithms (GCMP 128, GCMP 256, SAE). Signed-off-by: Nathan Errera <nathan.errera@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200930161256.be16c51fef3c.If4fac0fbc5bede4679b5f875b60c4e9a6ea7ca7c@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-01iwlwifi: fw: add default value for iwl_fw_lookup_cmd_verMordechay Goodstein1-4/+8
For new APIs this avoids checking every return if it's IWL_FW_CMD_VER_UNKNOWN (99) or it's lower than the new API value Done with spatch: -iwl_fw_lookup_cmd_ver(E1, E2, E3) +iwl_fw_lookup_cmd_ver(E1, E2, E3, IWL_FW_CMD_VER_UNKNOWN) Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200928121852.70bec6eb8008.I6ea78553801d33f7ed10fcd2e4be4ba781fe469a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-01iwlwifi: mvm: support new KEK KCK apiNathan Errera1-2/+15
Add a new version to iwl_wowlan_kek_kck_material_cmd struct to support akm and send the new cmd if supported. Signed-off-by: Nathan Errera <nathan.errera@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200928121852.6ec5889d793d.I32ad41a27f046a4047cf852c83936142fca4f20b@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-01iwlwifi: mvm: add support for new WOWLAN_TSC_RSC_PARAM versionDan Halperin1-9/+32
- Change the iwl_all_tsc_rsc struct to hold a sta_id (__le32) field, while preserving the union, used in the older version. - Adjust the use of this command according to the TLV. Signed-off-by: Dan Halperin <Dan1.Halperin@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200926002540.8c621903db59.I1cc7afedc0ff2009fe1abf007684339f299b73aa@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-01iwlwifi: mvm: add support for new version of WOWLAN_TKIP_SETTING_API_SDan Halperin1-1/+18
Add a sta_id (__le32) to the cmd, in order to support CDB protocol. Signed-off-by: Dan Halperin <Dan1.Halperin@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200926002540.5edc24ef3907.I68820c8c0946451cf0cca14dda171fa304b1dc43@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-01iwlwifi: wowlan: adapt to wowlan status API version 10Mordechay Goodstein1-1/+2
In version 10 we actually go back to the struct size before 9 so only for version 9 we need the size fixup Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200911204056.33b55b3ca440.Ib0202c7011d8d0e09f55fcceceb9d3d5051631c6@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-05-08iwlwifi: yoyo: add D3 resume timepointMordechay Goodstein1-0/+3
This timepoint is used for getting a clean log (if needed) after resume without any commands/interrupts from the driver to the FW. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200424182644.7cd450812977.Ibc9ddd6eae6af5ce499ac1e4f6c01853577d1e83@changeid
2020-05-08iwlwifi: mvm: stop supporting swcrypto and bt_coex_active module parametersEmmanuel Grumbach1-19/+12
Leave them active for iwldvm. We do not test this configuration and there is no reason nowadays to allow this. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200424182644.674a325b008b.Ifc925ca84500fb76c7b6f926a24a34ca777b4192@changeid
2020-04-24iwlwifi: support version 9 of WOWLAN_GET_STATUS notificationMordechay Goodstein1-9/+20
Add support for the new WOWLAN_GET_STATUS notification that contains a new element that informs the driver of TIDs whose BA sessions were closed during suspend. Note that the new functionality of handling these closed sessions is not implemented in this patch it. It only aligns to the new API version. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200417131727.b02153b94c1d.Ieb6291586d60f372d5a505604b18227ef97e7202@changeid
2020-03-27iwlwifi: scan: support FW APIs with variable number of profilesTova Mussai1-2/+3
The FW changed the maximum number of scan offload profiles to 8 in new APIs. Support it by changing the scan_offload_profile_cfg struct to be more dynamic, so we can reuse most of the code and only change size of the profiles array. Change-Id: I65210cf541af46e2675a8c764d5871f7f5b070d6 Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-02-03iwlwifi: d3: read all FW CPUs error infoMordechay Goodstein1-12/+40
Continue the wakeup flow only if no FW CPUs have an error If we don't check for error in all FW CPUs the driver can think based on one CPU that the FW is operational and try to access and send commands. Also, handle the error_id endianness correctly as le32 Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-20iwlwifi: mvm: update powersave correctly for D3Johannes Berg1-0/+6
This fixes a long-standing bug - we haven't been able to check the firmware image that was loaded for D3/not-D3 since the introduction of the unified image... Fix this by keeping a status flag for D3 instead of checking for the firmware image that's loaded. This reduces occurrences of checks for IWL_UCODE_WOWLAN to just the code that actually loads the image or deals with it in other ways. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-15iwlwifi: dbg_ini: support dump collection upon assert during D3Shahar S Matityahu1-0/+2
add assert time point in the D3 resume flow in case there was an assert during D3. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-25iwlwifi: mvm: add support for new version for D0I3_END_CMDHaim Dreyfuss1-1/+28
During D3 state there are some flows which requires FW reset. Add new API to support it. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: add sta_id to WOWLAN_CONFIG_CMDHaim Dreyfuss1-0/+4
WoWlan feature within the FW uses the station id for various of reasons. Thus we need to add this information to the command. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: add support for suspend-resume flow for new device generationHaim Dreyfuss1-10/+10
The new device generation has a slightly different suspend resume flow Currently, the way the driver instruct the device to move to D3 is by sending D3_CONFIG_CMD. Instead of using the host command the indication is by writing to the doorbell interrupt. The FW will respond with interrupt to indicate transition completion. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: add a pointer to the trans_cfg directly in transLuca Coelho1-2/+2
Add a pointer to the iwl_trans structure and point it to the trans part of the cfg. This is the first step in disassociating the trans configuration from the rest of the configuration. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: separate elements from cfg that are needed by trans_allocLuca Coelho1-2/+2
In order to be able to select the cfg depending on the HW revision or on the RF ID, we need to set up the trans before selecting the cfg. To do so, move the elements from cfg that are needed by iwl_trans_alloc() to a separate struct at the top of the cfg, so it can be used by other cfg types as well, before selecting the rest of the configuration. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: support per-platform antenna gainGil Adam1-0/+3
TX power limits as defined in the OTP assume the worst case scenario in terms of the platform's atenna gain, but most platforms are below that value so they can use more TX power without passing the regulatory limit. If the platform indicates in the BIOS that it indeed has lower gain, and the geographic location allows it, higher TX power can be used. The driver reads the PPAG (Per-Platform Antenna Gain) data from BIOS (if it exists), validates it and sends the appropriate command to the FW. This flow happens once at FW init, in case of suspend/resume there is no need to read again from BIOS as we save those values during init, so just send the PPAG command again to FW. Signed-off-by: Gil Adam <gil.adam@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: Set w-pointer upon resume according to SNAlex Malamud1-0/+9
During D3 state, FW may send packets. As a result, "write" queue pointer will be incremented by FW. Upon resume from D3, driver should adjust its shadows of "write" and "read" pointers to the value reported by FW. 1. Keep TID used during wowlan configuration. 2. Upon resume, set driver's "write" and "read" queue pointers to the value reported by FW. Signed-off-by: Alex Malamud <alex.malamud@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: mvm: iwl_mvm_wowlan_config_key_params is for wowlan onlyEmmanuel Grumbach1-49/+15
Now that d0i3 is dead, this function can't be called from d0i3 flows. Change its signature and make it static. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: mvm: remove the d0i3 entry/exit flowEmmanuel Grumbach1-110/+1
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: remove all the d0i3 referencesEmmanuel Grumbach1-9/+0
As part of the d0i3 removal. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg: support debug recording suspend resume commandShahar S Matityahu1-1/+1
Support the new DBGC_SUSPEND_RESUME command to change the recording state. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg: debug recording stop and restart command removeShahar S Matityahu1-1/+1
The 0xF6 command used to start and stop the recording from 22560 devices was removed. This is causing an assert when the driver tries to alter the recording state. Remove the use of the command. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg: don't stop dbg recording before entering D3 from 9000 devicesShahar S Matityahu1-4/+5
From 9000 device family the FW automatically stops the debug recording and the driver should not stop it as well. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg: move trans debug fields to a separate structShahar S Matityahu1-1/+1
Unite iwl_trans debug related fields under iwl_trans_debug struct to increase readability and keep iwl_trans clean. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: d3: Use struct_size() helperGustavo A. R. Silva1-2/+1
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used. So, change the following form: sizeof(*pattern_cmd) + wowlan->n_patterns * sizeof(struct iwlagn_wowlan_pattern) to : struct_size(pattern_cmd, patterns, wowlan->n_patterns) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-01iwlwifi: mvm: remove d3_sram debugfs fileJohannes Berg1-22/+0
This debugfs file is really old, and cannot work properly since the unified image support. Rather than trying to make it work, which is difficult now due to multiple images (LMAC/UMAC etc.) just remove it - we no longer need it since we properly do a FW coredump even in D3 cases. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-29iwlwifi: mvm: support v2 of the WoWLAN patterns commandLuca Coelho1-5/+53
Add new definitions for the WoWLAN patterns API version 2 and support for version 2 of the WoWLAN patterns command without implementing the new features. With this commit we only supporting the existing bitmask pattern match. Use the new version only if the TLV is set. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: mvm: use dump worker during restart instead of sync dumpShahar S Matityahu1-1/+0
In restart flow, the driver requests HW restart from mac80211 and then mac80211 uses a worker to do the restart flow. In that flow a sync dump is performed. Instead, schedule the dump worker before requesting HW restart from mac80211. This approach simplifies the restart flow. Also, it is neeeded in order to differentiate between the handling of SW and HW errors in a future commit. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: mvm: Support new format of SCAN_OFFLOAD_PROFILES_QUERY_RSPIlan Peer1-15/+74
Newer FWs use a new format of the SCAN_OFFLOAD_PROFILES_QUERY_RSP, which now supports indicating match on an higher number of channels. Modify the code to support both the old format and the newer one, based on a FW TLV. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: receive umac and lmac error table addresses from TLVsShahar S Matityahu1-1/+1
TLV 54 holds umac debug related addresses. TLV 55 holds lmac debug related addresses. These TLVs aim to replace the alive notification data in the future. Parse and keep error table addresses received from the TLVs for both lmac and umac and use these addresses instead of the pointer received from alive notification. The feature supports only unified image. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-25iwlwifi: mvm: support mac80211 TXQs modelSara Sharon1-6/+2
Move to use the new mac80211 TXQs implementation. This has quite a few benefits for us. We can get rid of the awkward mapping of DQA to mac80211 queues. We can stop buffering traffic while waiting for the queue to be allocated. We can also use mac80211 AMSDUs instead of building it ourselves. The usage is pretty simple: Each ieee80211_txq contains iwl_mvm_txq. There is such a queue for each TID, and one for management frames. We keep having static AP queues for probes and non-bufferable MMPDUs, along with broadcast and multicast queues. Those are being used from the "old" TX invocation path - iwl_mvm_mac_tx. When there is a new frame in a TXQ, iwl_mvm_mac_wake_tx is being called, and either invokes the TX path, or allocates the queue if it does not exist. Most of the TX path is left untouched, although we can consider cleaning it up some more, for example get rid of the duplication of txq_id in both iwl_mvm_txq and iwl_mvm_dqa_txq_info. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-20iwlwifi: mvm: d3: use struct_size() in kzalloc()Gustavo A. R. Silva1-4/+2
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-11iwlwifi: dbg: avoid passing trigger aroundSara Sharon1-1/+1
The trigger structure is being passed around, when all we care about is whether to dump only monitor or not. Pass a bool instead. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-10-08iwlwifi: mvm: move rt status check to the start of the resume flowShahar S Matityahu1-25/+35
Move the rt status checking to the start of the resume flow in order to avoid sending D0I3_END_CMD to the FW. Also, collect dump if an assert was encountered. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-10-08iwlwifi: mvm: don't send keys when entering D3Sara Sharon1-1/+3
In the past, we needed to program the keys when entering D3. This was since we replaced the image. However, now that there is a single image, this is no longer needed. Note that RSC is sent separately in a new command. This solves issues with newer devices that support PN offload. Since driver re-sent the keys, the PN got zeroed and the receiver dropped the next packets, until PN caught up again. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: cleanup dead code on resume flow for non unified image.Dreyfuss, Haim1-15/+6
CDB support has nothing to do with non unified image. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: fw: stop and start debugging using host commandSara Sharon1-1/+1
In new devices, access to periphery is forbidden. Send instead host command to start and stop debugging. Memory allocation is written in context info, but in case we need to update it there is a dedicated command. Add definitions, currently unused, of the new command. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: fw: add a restart FW debug functionSara Sharon1-1/+1
Move the restart FW debug code to a function. This avoids code duplication and lays the infra to support the new start and stop host commands in some future devices. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: avoid code duplication in stopping fw debug data recordingShahar S Matityahu1-1/+1
Make all FW debug data stop recording flows to use iwl_fw_dbg_stop_recording function instead of writing to FW registers directly. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: support new WoWLAN status FW APILuca Coelho1-41/+113
A new FW API has been added for WOWLAN_GET_STATUSES to support multiple GTK keys and IGTK keys. Check the respective TLV and use the new API when it is set. Let most of the code use the new version (v7) and convert the old version (v6) to the new one when needed. Also refactor some functions a bit so that they can be reused more easily. Particularly the part that calls WOWLAN_GET_STATUSES which is reused in D3 and D0i3. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: remove duplicate if in iwl_mvm_setup_connection_keep()Luca Coelho1-4/+3
We repeated the same if twice in a row. Remove the second one and move the code block into the previous one. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: add d3 debug data supportShahar S Matityahu1-0/+3
During d3, the firmware records debug data into internal buffer if debug data collection occurs, collect the data that was written to the buffer Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-29 01:54:28 +0300