summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/broadcom
AgeCommit message (Collapse)AuthorFilesLines
2016-02-06brcmfmac: fix setting primary channel for 80 MHz widthRafał Miłecki1-13/+10
First of all it changes the way we calculate primary channel offset. If we use e.g. 80 MHz channel with primary frequency 5180 MHz (which means center frequency is 5210 MHz) it makes sense to calculate primary offset as -30 MHz. Then it fixes values we compare primary_offset with. We were comparing offset in MHz against -2 or 2 which was resulting in picking a wrong primary channel. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-06bcma: use _PMU_ in all names of PMU registersRafał Miłecki1-4/+4
PMU (Power Management Unit) seems to be a separated piece of hardware, just accessed using ChipCommon core registers. In recent Broadcom chipsets PMU is not bounded to CC but available as separated core. To make code cleaner & easier to review (for a correct R/W access) use clearer names. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-19brcmfmac: fix sdio sg table alloc crashHante Meuleman3-25/+21
With commit 7d34b0560567 ("brcmfmac: Move all module parameters to one place") a bug was introduced causing a null pointer exception. This patch fixes the bug by initializing the sg table till after the settings have been initialized. Fixes: 7d34b0560567 ("brcmfmac: Move all module parameters to one place") Reported-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-19brcmfmac: add missing includeFelix Fietkau1-0/+1
linux/module.h is required for defining module parameters Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-18brcmfmac: fix BRCMF_FW_NVRAM_DEF macro for older gcc compilersArend van Spriel1-2/+1
With gcc < 4.3 __UNIQUE_ID does not create unique ids with the macro BRCMF_FW_NVRAM_DEF. Fix this by removing the MODULE_FIRMWARE instance for the nvram file. This file is not in linux-firmware repo so it may not be needed anyway. Otherwise consider this as a temporary fix. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arend van Spriel <aspriel@gmail.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-14mac80211: pass block ack session timeout to to driverSara Sharon1-3/+5
Currently mac80211 does not inform the driver of the session block ack timeout when starting a rx aggregation session. Drivers that manage the reorder buffer need to know this parameter. Seeing that there are now too many arguments for the drv_ampdu_action() function, wrap them inside a structure. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-08brcmfmac: Do not handle link downs for ibss.Hante Meuleman1-5/+7
Sometimes on module reload and reconnect to ibss a deauth from other station can be received. This is treated as a link down but for ibss this is wrong. It will close the interface and no data is possible. Ignore the firmware generated link down events in ibss mode, as ibss is always teared down by cfg80211. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: use jiffies for timeout in btcoexArend van Spriel1-7/+5
The btcoex uses a timeout which was in milliseconds and got converted to jiffies upon using timer api. Instead, convert it to jiffies and treat it as such further. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: use msecs_to_jiffies() in macro definitionsArend van Spriel9-33/+31
Instead to having macro definition for millisecond timeout have the definition directly in jiffies. This makes the unit of the value immediately clear and may result in code that is bit more compact. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: change brcmf_sdio_wd_timer() prototypeArend van Spriel2-22/+13
The function brcmf_sdio_wd_timer() has wdtick parameter. However, it is only called with two values and as such the parameter is replaced with boolean value indicating the timer should be active or not. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: Reshuffle functions to avoid forward declarationsHante Meuleman1-306/+290
Function prototype forward declarations are to be avoided. This patch shuffles some of the functions so the forward declarations can be removed. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: Add wowl net detect supportHante Meuleman3-16/+155
With wowl net detect it becomes possible to scan for specific ssids and wakeup once found. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-07brcmfmac: introduce module parameter to force successful probeArend van Spriel3-1/+25
The module parameter can be used to ensure the probe succeeds thus claiming the device and allowing post-mortem debugging in case of firmware crash. It is only available when select CONFIG_BRCMDBG. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-07brcmfmac: Move all module parameters to one placeHante Meuleman9-52/+144
Module parameters are defined in several files. Move them in one place and make them device specific or global. This makes it easier to override device specific settings by external data like platform data in the future. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-07brcmfmac: Fix warn trace on module unload while in ibss modeHante Meuleman1-2/+7
When the driver is being unloaded a situation can occur where the wirelesss core (cfg80211) wants to remove the ibss, but the state of brcmfmac has already been set to down. When an error is returned in that situation then that will result in a stack trace on removal of the wiphy object. This is avoided by returning 0 when device is down on a leave_ibss call. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-07brcmfmac: obtain feature info using 'cap' firmware commandArend van Spriel1-22/+31
Several features in the driver directly map to a firmware feature listed in response of the 'cap' firmware command. For those features this response will be examined instead of attempting individual firmware commands. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Mathy Vanhoef <vanhoefm@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-07brcmfmac: Add support for scheduled scan mac randomizationHante Meuleman4-8/+77
Scheduled scan be requested to use mac randomization. This patch checks the flags and enables the randomization if desired. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-07brcmfmac: Add get_station support for IBSSHante Meuleman3-0/+69
When get_station is requested for IBSS then an error will be printed and no information will be returned. This patch adds IBSS specific get station information function. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-07brcmfmac: add arp offload ip address table configuration supportFranky Lin2-0/+110
Obtain ipv4 address through inetaddr notification for ARP offload host ip table configuration. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-11brcmfmac: Move scheduled scan related interface layer structsHante Meuleman2-81/+81
All interface layer related to scheduled scan are moved in fwil_types.h Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-11brcmfmac: Change error print in debug printHante Meuleman1-2/+2
The pcie suspend and resume routines contain some error prints, which should have been debug prints. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-11brcmfmac: add 43242 device id for LG dongleArend van Spriel2-0/+3
Got a hint on IRC that a 43242 dongle for LG smart TV's works with brcmfmac: > Hello - I recently got a LG AN-WF500 wireless dongle for LG's SmartTVs. > From the information I gathered it uses a Broadcom chipset BCM43242. > The device should have been supported by brcmfmac kernel driver if it used > USB IDs 0a5c:bd1f. > My device however identifies itself as "ID 043e:3101 LG Electronics USA, Inc.". > I then tried adding the USB ID to the driver with > "echo "043e 3101" > /sys/bus/usb/drivers/brcmfmac/new_id" and it just works. > The kernel provides the following information. > [15958.851291] usb 3-1.1.3: new high-speed USB device number 53 using ehci-pci > [15958.946723] usb 3-1.1.3: New USB device found, idVendor=043e, idProduct=3101 > [15958.946728] usb 3-1.1.3: New USB device strings: Mfr=1, Product=4, SerialNumber=3 > [15958.946731] usb 3-1.1.3: Product: Composite Wireless Adapter > [15958.946733] usb 3-1.1.3: Manufacturer: Broadcom > [15958.946735] usb 3-1.1.3: SerialNumber: 28458 Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-11brcmfmac: fix waitqueue_active without memory barrier in brcmfmac driverKosuke Tatsukawa3-8/+4
brcmf_msgbuf_ioctl_resp_wake() seems to be missing a memory barrier which might cause the waker to not notice the waiter and miss sending a wake_up as in the following figure. brcmf_msgbuf_ioctl_resp_wake brcmf_msgbuf_ioctl_resp_wait ------------------------------------------------------------------------ if (waitqueue_active(&msgbuf->ioctl_resp_wait)) /* The CPU might reorder the test for the waitqueue up here, before prior writes complete */ /* wait_event_timeout */ /* __wait_event_timeout */ /* ___wait_event */ prepare_to_wait_event(&wq, &__wait, state); if (msgbuf->ctl_completed) ... msgbuf->ctl_completed = true; schedule_timeout(__ret)) ------------------------------------------------------------------------ There are three other place in drivers/net/wireless/brcm80211/brcmfmac/ which have similar code. The attached patch removes the call to waitqueue_active() leaving just wake_up() behind. This fixes the problem because the call to spin_lock_irqsave() in wake_up() will be an ACQUIRE operation. I found this issue when I was looking through the linux source code for places calling waitqueue_active() before wake_up*(), but without preceding memory barriers, after sending a patch to fix a similar issue in drivers/tty/n_tty.c (Details about the original issue can be found here: https://lkml.org/lkml/2015/9/28/849). Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-11brcmfmac: Fix IBSS setupHante Meuleman1-8/+9
IBSS got broken over time. Disconnect events should not be given for IBSS mode and connect events for IBSS need to have channel information. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-11brcmfmac: no interface combination check for single interfaceArend van Spriel1-3/+11
The interface combinations are intended for use-case in which the driver handles multiple interface concurrently. This means that the combinations do not need to be checked when there is only a single interface active. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-11brcmfmac: Add support for PCIE 4350 revision 5 deviceHante Meuleman1-1/+3
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-11brcmfmac: Make TDLS a detectable featureHante Meuleman3-10/+16
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-11brcmfmac: Cleanup pmksa cache handling codeHante Meuleman4-105/+82
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-11brcmfmac: Remove some redundant cfg80211 dataHante Meuleman2-11/+0
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-11brcmfmac: Use local storage for ssid iovarHante Meuleman2-16/+9
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-11brcmfmac: Simplify scan timing configurationHante Meuleman2-23/+12
No need to pass timing configuration in local functions as they are static anyway. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-11brcm80211: fix compare_const_fl.cocci warningsJulia Lawall1-2/+2
Move constants to the right of binary operators. Generated by: scripts/coccinelle/misc/compare_const_fl.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-11brcmfmac: only lock and unlock fws if fws is not nullColin Ian King1-3/+4
There is a null ptr check for fws to set bcmc_credit_check, however, there a lock and unlock on fws should only performed if fwts is also not null to also avoid a potential null pointer deference. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcm80211: fix error code in brcmf_pcie_exit_download_state()Dan Carpenter1-1/+3
The original code returns 1 on failure and 0 on success but the caller was expecting an error code on failure. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: Fix double free on exception at module load.Hante Meuleman1-0/+2
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: Unify methods to define and map firmware files.Hante Meuleman6-317/+178
All bus drivers (sdio, usb and pcie) require firmware files which needs to be downloaded to the device, The definitions and mapping of device id and revision to firmware and nvram file is done by each bus driver. This patch creates common functions and defines to simplify and unify the definition of these firmware and nvram files and mapping. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: assure net_ratelimit() is declared before useArend van Spriel1-0/+2
Under some kernel configuration we get build issue with implicit declaration of net_ratelimit() function. Fix this by explicitly including the file providing the prototype. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: Add beamforming support.Hante Meuleman3-2/+42
Some devices support beamforming. This patch enables tx beamforming if supported and reports beamforming capabilities per channel if supported. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: Cleanup roaming configuration.Hante Meuleman3-46/+22
Put all roaming configuration related code in one place and configure timeout based upon roaming setting. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: Remove redundant parameter action from scan.Hante Meuleman3-12/+9
ESCAN is always performed using action start scan. No need to pass this parameter on to different functions. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: no retries on rxglom superframe errorsFranky Lin1-22/+8
Aborting the current read attempt on the superframe also removes the packet from the pipeline. Retries should not be attempted on the next packet since it would not be a superframe(either a superframe descriptor or other data packet) and should not be handled by brcmf_sdio_rxglom Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: Change error print on wlan0 existence.Hante Meuleman1-3/+4
During initialization of the device, but also on some other moments the driver prints an error that the netdev already exists. This is a result of the way the driver is initializing the firmware and not really an error. The code is not treating it as an error either. This error print has resulted in many questions by users and is confusing and incorrect. This patch changes the error log into a debug info log. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: Return actual error by fwil.Hante Meuleman1-1/+2
FWIL is always mapping back errors to EBADE. This is not very conventient when trying to understand problems by reading logs. Some callers print the error code, but that is quite useless when the exact error code is not returned. It also makes it impossible to differentiate based on error code. This patch changes the return of EBADE into the actual error code. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: Cleanup ssid storage.Hante Meuleman5-48/+24
SSIDs used for connect and p2p got stored, but never used. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: constify brcmf_bus_ops structuresJulia Lawall4-4/+4
The brcmf_bus_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcm80211: Delete an unnecessary check before the function call ↵Markus Elfring1-2/+1
"release_firmware" The release_firmware() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Add wowl wake indication report.Hante Meuleman2-2/+77
On wakeup of the system (resume) a wowl wakeup indication report can be sent to cfg80211. This patch adds support for this. The report specifies if the device was responsible for the wakeup and if so, will specify the exact reason. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Use new methods for pcie Power Management.Hante Meuleman1-52/+37
Currently the legacy methods suspend and resume are used for pcie devices. This is not the preferable method and is also causing issues with some setups when doing hibernate. Changing this to use the new PM methods. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Use consistent naming for bsscfgidx.Hante Meuleman10-74/+78
The variable bsscfgidx is used in different places with different names, e.g. bsscfg, bssidx, bsscfg_idx. This patch cleans this up by using bsscfgidx everywhere. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Add RSDB support.Hante Meuleman3-2/+8
Broadcom devices with a single 802.11 core can work on two band concurrently using VSDB feature, ie. Virtual Simultaneous Dual-Band. For devices that are fitted with two 802.11 cores and RF paths the driver should support a firmware feature called RSDB, which stands for Real Simultaneous Dual-Band. RSDB works almost autonomously in firmware except for AP config. When the device supports RSDB then the interface should not be brought down when configuring it, otherwise the link (if configured) on the other interface will be lost. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> [kvalo@codeaurora.org: changed the commit log based on discussion] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 07:47:06 +0300