summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
AgeCommit message (Collapse)AuthorFilesLines
2017-06-15brcmfmac: add parameter to pass error code in firmware callbackArend Van Spriel1-5/+12
Extend the parameters in the firmware callback so it can be called upon success and failure. This allows the caller to properly clear all resources in the failure path. Right now the error code is always zero, ie. success. Cc: stable@vger.kernel.org # 4.9.x- Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05brcmfmac: restore bus state when enter_D3 failsArend Van Spriel1-0/+1
In brcmf_pcie_suspend() we inform the firmware on the device that it will enter in D3 state. Before this is done we already bring down the bus state. However, When entering D3 fails we abort the suspend and the bus state need to be restored. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-28brcmfmac: drop duplicated core selection from brcmf_pcie_attachRafał Miłecki1-1/+0
It was left after reworking PCIe reset in commit 07fe2e38c7fd ("brcmfmac: Reset PCIE devices after recognition."). Cc: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-20brcmfmac: rename brcmf_bus_start function to brcmf_bus_startedRafał Miłecki1-1/+1
This intends to make init/attach process slightly easier to follow. What driver was doing in brcmf_bus_start wasn't bus specific at all and function brcmf_bus_stop wasn't undoing things done there. This function is supposed to be called by bus specific code when the bus is ready. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: add pcie host dongle interface rev6 supportFranky Lin1-69/+102
In rev6 of pcie host dongle interface protocol, host needs to maximum supported ring number from dongle shared memory and set up ring buffer and ring indices offset accordingly. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-06-16brcmfmac: add support for the PCIE devices 43525 and 43465Hante Meuleman1-1/+5
This patch adds support for the new PCIE devices 43525 and 43465. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <franky.lin@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10brcmfmac: Remove waitqueue_active checkHui Wang1-4/+2
We met a problem of pm_suspend when repeated closing/opening the lid on a Lenovo laptop (1/20 reproduce rate), below is the log: [ 199.735876] PM: Entering mem sleep [ 199.750516] e1000e: EEE TX LPI TIMER: 00000011 [ 199.856638] Trying to free nonexistent resource <000000000000d000-000000000000d0ff> [ 201.753566] brcmfmac: brcmf_pcie_suspend: Timeout on response for entering D3 substate [ 201.753581] pci_legacy_suspend(): brcmf_pcie_suspend+0x0/0x1f0 [brcmfmac] returns -5 [ 201.753585] dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -5 [ 201.753589] PM: Device 0000:04:00.0 failed to suspend async: error -5 Through debugging, we found when problem happens, it is not the device fails to enter D3, but the signal D3_ACK comes too early to pass the waitqueue_active() check. Just like this: brcmf_pcie_send_mb_data(devinfo, BRCMF_H2D_HOST_D3_INFORM); // signal is triggered here wait_event_timeout(devinfo->mbdata_resp_wait, devinfo->mbdata_completed, BRCMF_PCIE_MBDATA_TIMEOUT); So far I think it is safe to remove waitqueue_active check since there is only one place to trigger this signal (sending BRCMF_H2D_HOST_D3_INFORM). And it is not a problem calling wake_up event earlier than calling wait_event. Cc: Brett Rudley <brudley@broadcom.com> Cc: Hante Meuleman <meuleman@broadcom.com> Cc: Franky (Zhenhui) Lin <frankyl@broadcom.com> Cc: Pieter-Paul Giesberts <pieterpg@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-07brcmfmac: merge platform data and module paramatersHante Meuleman1-4/+20
Merge module parameters and platform data in one struct. This is the last step to move to the new platform data per device. Now parameters of platform data will be merged with module parameters per device. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-07brcmfmac: remove pcie gen1 supportHante Meuleman1-115/+20
The PCIE bus driver supports older gen1 (v1) chips, but there is no actual device which is using this older pcie core which is supported by brcmfmac. Remove all gen1 related code. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-07brcmfmac: add support for the PCIE 4366c0 chipHante Meuleman1-1/+3
A newer version of the 4366 PCIE chip has been released. Add support for this version of the chip. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-07brcmfmac: use bar1 window size as provided by pci subsystemHante Meuleman1-6/+4
The PCIE bar1 window size is specified by chip. Currently the ioremap of bar1 was using a define which always matched the size of bar1, but newer chips can have a different bar1 sizes. With this patch the ioremap will be called with the by chip provided window size. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-07brcmfmac: use device memsize config from fw if definedHante Meuleman1-0/+33
Newer type pcie devices have memory which get shared between fw and hw. The division of this memory is done firmware compile time. As a result the ramsize as used by driver needs to be adjusted for this. This is done by reading the memory size from the firmware. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-06brcmfmac: add support for 14e4:4365 PCI ID with BCM4366 chipsetRafał Miłecki1-0/+4
On Broadcom ARM routers BCM4366 cards are available with 14e4:4365 ID. Unfortunately this ID was already used by Broadcom for cards with BCM43142, a totally different chipset requiring SoftMAC driver. To avoid a conflict between brcmfmac and bcma use more specific ID entry with subvendor and subdevice specified. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: use msecs_to_jiffies() in macro definitionsArend van Spriel1-4/+3
Instead to having macro definition for millisecond timeout have the definition directly in jiffies. This makes the unit of the value immediately clear and may result in code that is bit more compact. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-11brcmfmac: Change error print in debug printHante Meuleman1-2/+2
The pcie suspend and resume routines contain some error prints, which should have been debug prints. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-11brcmfmac: Add support for PCIE 4350 revision 5 deviceHante Meuleman1-1/+3
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcm80211: fix error code in brcmf_pcie_exit_download_state()Dan Carpenter1-1/+3
The original code returns 1 on failure and 0 on success but the caller was expecting an error code on failure. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: Unify methods to define and map firmware files.Hante Meuleman1-120/+29
All bus drivers (sdio, usb and pcie) require firmware files which needs to be downloaded to the device, The definitions and mapping of device id and revision to firmware and nvram file is done by each bus driver. This patch creates common functions and defines to simplify and unify the definition of these firmware and nvram files and mapping. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: constify brcmf_bus_ops structuresJulia Lawall1-1/+1
The brcmf_bus_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Use new methods for pcie Power Management.Hante Meuleman1-52/+37
Currently the legacy methods suspend and resume are used for pcie devices. This is not the preferable method and is also causing issues with some setups when doing hibernate. Changing this to use the new PM methods. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Remove unncessary variable irq_requested.Hante Meuleman1-6/+0
The variable irq_requested is unneeded as the functionality it is providing, is also provided by the variable irq_allocated. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Add support for the BCM4359 11ac RSDB PCIE device.Hante Meuleman1-0/+9
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18brcm80211: move under broadcom vendor directoryKalle Valo1-0/+2107
Part of reorganising wireless drivers directory and Kconfig. Note that I had to edit Makefiles from subdirectories to use the new location. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 15:11:26 +0300