summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/brcm80211/brcmfmac/flowring.c
AgeCommit message (Collapse)AuthorFilesLines
2015-11-18brcm80211: move under broadcom vendor directoryKalle Valo1-504/+0
Part of reorganising wireless drivers directory and Kconfig. Note that I had to edit Makefiles from subdirectories to use the new location. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-09-29brcmfmac: use brcmf_get_ifp() to map ifidx to struct brcmf_if instanceArend van Spriel1-1/+1
The knowledge on how to map the interface index to a struct brcmf_if instance is in brcmf_get_ifp() so use that function when only the interface index is known instead of accessing brcmf_pub::iflist directly. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-25brcmfmac: block the correct flowring when backup queue overflowFranky Lin1-3/+7
brcmf_flowring_block blocks the last active flowring under the same interface instead of the one provided by caller. This could lead to a dead lock of netif stop if there are more than one flowring under the interface and the traffic is high enough so brcmf_flowring_enqueue can not unblock the ring right away. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26brcmfmac: Improve throughput by scheduling msbug flow worker.Hante Meuleman1-2/+3
The tx flow worker in msgbuf gets scheduled at tx till a certain threshold has been reached. Then the tx completes will take over the scheduling. When amsdu and ampdu is used the frames are transferred wireless in a very bulky fashion, in combination with this scheduling algorithm and buffer limiters in the stack this can result in limited throughput. This change causes the flow worker to be scheduled more frequently from tx. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-04wireless: Use eth_<foo>_addr instead of memsetJoe Perches1-1/+1
Use the built-in function instead of memset. Miscellanea: Add #include <linux/etherdevice.h> where appropriate Use ETH_ALEN instead of 6 Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-06brcmfmac: signal completion of 802.1x.Hante Meuleman1-4/+2
Use cfg80211 change_station to signal the completion of 802.1x to firmware. This allows FW to take appropriate actions. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-10-30brcmfmac: (clean) Rename sdio related files.Hante Meuleman1-1/+1
Rename sdio_host.h to sdio.h and dhd_sdio.c to sdio.c. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30brcmfmac: (clean) Rename dhd_bus.h in bus.hHante Meuleman1-1/+1
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30brcmfmac: (clean) Rename files dhd_dbg to debugHante Meuleman1-1/+1
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30brcmfmac: Avoid usage of GFP_ATOMIC.Hante Meuleman1-2/+2
Msgbuf is using GFP_ATOMIC where GFP_KERNEL is also sufficient. On some platforms the coherent DMA memory is very limited when using GFP_ATOMIC. This patch changes usage of GFP_ATOMIC to GFP_KERNEL and uses worker to make this possible for creation of flowring. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31brcmfmac: Add TDLS support to msgbuf.Hante Meuleman1-4/+90
TDLS connections require dedicated flowrings. This patches adds TDLS event handling and flowring creation/deletion based on these events. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31brcmfmac: Fix msgbuf flow control.Hante Meuleman1-4/+57
Msgbuf flow control was using a function to flow off and on which was not supported without proptx enabled. Also flow control needs to be handled per ifidx. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31brcmfmac: Adding msgbuf protocol.Hante Meuleman1-0/+362
This patch will add the msgbuf protocol. This protocol is used by the soon to be added new bus interface PCIe. Msgbuf is a protocol where most data is and remains located on the host (driver) side and transferred by DMA from and to device. Msgbuf is the protocol which takes care of the signalling of the buffers between host and device which identifies this DMA-able data. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-21 04:06:59 +0300