summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
AgeCommit message (Collapse)AuthorFilesLines
2013-08-16brcmfmac: abstract tx packet processing functionsFranky Lin1-8/+8
Abstract brcmf_sdio_txpkt_prep and brcmf_sdio_txpkt_postp as a preparation of chained tx packets for host side tx glomming. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27brcmfmac: add broken scatter-gather DMA supportFranky Lin1-11/+67
DMA engine of some old SDIO host controllers require block size alignment for data length of each scatterlist item. This patch introduces an intermediate buffer list to support this kind of platform. It decreases the throughput because of an extra memcpy in critical data path. So don't turn this on unless it's necessary. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27brcmfmac: use unified dongle address preparation functionFranky Lin1-52/+27
Introduce a unified dongle backplane address preparation function brcmf_sdio_addrprep to replace duplicate address prep code. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27brcmfmac: remove SDIO_REQ_ASYNC flagFranky Lin1-11/+3
Remove SDIO_REQ_ASYNC from brcmfmac since it is not being used. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18brcmfmac: add sdio sg list supportFranky Lin1-16/+133
Add scatter gather list support for better rx glom performance. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18brcmfmac: replace brcmf_sdioh_request_buffer with brcmf_sdio_buffrwFranky Lin1-11/+47
Introducing a new SDIO block data access interface function brcmf_sdio_buffrw. It will act as a unified interface function for any block data access to WiFi dongle through SDIO interface. This patch enables the support for single skb transmission. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-12brcmfmac: define and use platform specific data for SDIO.Hante Meuleman1-77/+78
This patch adds support for platform specific data for SDIO fullmac devices. Currently OOB interrupts are configured by Kconfig BRCMFMAC_SDIO_OOB but that is now determined dynamically by checking availibility of platform data. Cc: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-12brcmfmac: aggregate dongle ram access interfaceFranky Lin1-22/+66
For fullmac chips host driver can access to dongle RAM through SDIO function 1. Introduce brcmf_sdio_ramrw and place it at bcmsdh.c with other interface functions. Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: add dedicated log level for low-level sdio debuggingArend van Spriel1-15/+15
The low-level sdio code has a large number of trace and info messages that are mostly useful looking into bus specific issues. For tracing higher-level driver functions it is better to have a dedicated level for low-level sdio debugging. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Change-Id: Ia424ff18d9033b97aeffc248358e50c51805e815 Reviewed-on: http://lb-bun-88.bun.broadcom.com:8080/74 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-08brcmfmac: define pr_fmt in one placeArend van Spriel1-2/+0
Several source files (but not all) define the pr_fmt() macro in exactly the same way. Instead this commit defines it in a header file so driver logging is consistent. Cc: Joe Perches <joe@perches.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11brcmfmac: error messages should not be suppressedArend van Spriel1-8/+7
The call to brcmf_dbg(ERROR, ...) only resulted in a log message when compiled with -DDEBUG. Error messages are valuable for resolving issues so this patch replaces it with brcmf_err(...) so they always end up in the log. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16brcmfmac: sdio module load fix.Hante Meuleman1-3/+0
On sdio module unload followed by load (without removing the device) the access window should be moved back to enumeration space. Force this by removing initialisation of sbwad during probe. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16brcmfmac: avoid usage of func->card->dev in sdio probe.Hante Meuleman1-4/+6
brcmf_ops_sdio_probe used the private_date func->card->dev to store device data of brcmfmac sdio. This is not a good place to store the data. Use dev of func and use func->card->sdio_func to group the functions the driver is using. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16brcmfmac: sdio unload fix.Hante Meuleman1-0/+2
on sdio remove the bus_if should be configured for close, so new data from higher layers will be blocked. Also the access to bus_if in the watchdog should be checked for null pointer access on sdio remove. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-14brcmfmac: protect consecutive SDIO access with sdio_claim_hostFranky Lin1-22/+6
Semaphore sdsem is used to protect consecutive memory access through SDIO bus. Same functionality is provided by sdio_claim_host/ sdio_release_host interface as well. Replace sdsem with sdio_claim_host. Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: clear status for in-band interrupt in brcmf_sdbrcm_isrFranky Lin1-1/+1
SDIO in-band interrupt is level sensitive according to SDIO standard. When the register interrupt handler gets called by SDIO stack it is running in non interrupt context and expected to clear the interrupt from the dongle. Therefore in-band and out-of-band interrupt need to be handled differently. Cc: Wei Ni <wni@nvidia.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Reported-by: Wei Ni <wni@nvidia.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: raise SDIO host lock to higher levelFranky Lin1-5/+32
Use SDIO host lock to protect the entire communication process of register access or data read/write rather than function calls to MMC/SDIO stack only. This can help to avoid unintentional memory access and unexpected interruption. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04brcmfmac: Fix likely misuse of | for &Joe Perches1-2/+2
Using | with a constant is always true. Likely this should have be &. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmfmac: replace brcmf_sdioh_card_regread with brcmf_sdio_regrlFranky Lin1-2/+2
Use the newly introduced brcmf_sdio_regrl to replace brcmf_sdioh_card_regread as part of the SDIO WiFi dongle register access interface clean up. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmfmac: remove function brcmf_sdcard_regfailFranky Lin1-7/+1
The new interface brcmf_sdio_regr/w provides result of access attempts. It is no longer necessary to use dedicated variable and function to provide enquiry for failure. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmfmac: replace brcmf_sdcard_reg_write with brcmf_sdio_regwlFranky Lin1-32/+0
Use the newly introduced brcmf_sdio_regwl to replace brcmf_sdcard_reg_write as part of the SDIO WiFi dongle register access interface clean up. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmfmac: replace brcmf_sdcard_reg_read with brcmf_sdio_regrlFranky Lin1-32/+0
Use the newly introduced brcmf_sdio_regrl to replace brcmf_sdcard_reg_read as part of the SDIO WiFi dongle register access interface clean up. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmfmac: replace brcmf_sdcard_cfg_write with brcmf_sdio_regwbFranky Lin1-28/+4
Use the newly introduced brcmf_sdio_regwb to replace brcmf_sdcard_cfg_write as part of the SDIO WiFi dongle register access interface clean up. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmfmac: replace brcmf_sdcard_cfg_read with brcmf_sdio_regrbFranky Lin1-25/+1
Use the newly introduced brcmf_sdio_regrb to replace brcmf_sdcard_cfg_read as part of the SDIO WiFi dongle register access interface clean up. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmfmac: introduce unified register access interface for SDIOFranky Lin1-0/+113
Both brcmf_sdcard_cfg_read/write and brcmf_sdcard_reg_read/write are used as interface functions for register access of SDIO WiFi dongle. A unified interface brcmf_sdio_regr/w is introduced in this patch in order to simplify the interface and keep the complexity within the lower layer. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmfmac: decouple set_sbaddr_window from register write interfaceFranky Lin1-13/+24
brcmf_sdcard_set_sbaddr_window configures 3 registers on SDIO function misc bank to change current silicon backplane programming window. This patch makes it call brcmf_sdioh_request_byte directly in order to prepare for the write register interface unification. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmfmac: remove unused parameter of brcmf_sdcard_reg_writeFranky Lin1-9/+7
The size parameter for brcmf_sdcard_reg_write is always 4. Remove it to make the code cleaner. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmfmac: remove unused parameter of brcmf_sdcard_reg_readFranky Lin1-22/+8
The size parameter for brcmf_sdcard_reg_read is always 4. Remove it to make the code neat. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-09brcmfmac: add out of band interrupt supportFranky Lin1-7/+88
Some sdio host controllers do not support real in band interrupt. Software polling mode as a replacement is not fast enough for high throughput and new features. Also some in band interrupts do not support host wake up on embedded platform even when they are real physical interrupts. Therefore out of band (oob) interrupt mechanism is implemented for these scenarios. To provide oob irq number and flags used for irq registration in brcmfmac, a platform device contains irq resource must be registered in board specific code. Here is an example of platform device structure: struct resource brcmf_sdio_res[] = { { .start = GPIO_BRCMF_SDIO_OOB_NUM, .end = GPIO_BRCMF_SDIO_OOB_NUM, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, } }; struct platform_device brcmf_sdio_device = { .name = "brcmf_sdio_pd", .id = -1, .num_resources = ARRAY_SIZE(brcmf_sdio_res), .resource = brcmf_sdio_res, }; Reviewed-by: pieter-paul giesberts <pieterpg@broadcom.com> Reviewed-by: arend van spriel <arend@broadcom.com> Signed-off-by: franky lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-09brcmfmac: stop releasing sdio host in irq handlerFranky Lin1-4/+0
brcmf_sdbrcm_isr doesn't access to the dongle through SDIO bus. Stop releasing and claiming host in irq handler to eliminate any potential risk. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24brcm80211: Use pr_fmt and pr_<level>Joe Perches1-0/+2
Convert printks to pr_<level> Prefix logging with pr_fmt. Use ##__VA_ARGS__ in some WL_ logging macros. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19brcm80211: fmac: exclude unnecessary header filesFranky Lin1-1/+0
This patch removes some headers files include lines from sdio layer code. This is part of the fullmac bus interface refactoring. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19brcm80211: fmac: register a dummy irq handler for SDIO function 2Franky Lin1-0/+7
When there is data available in dongle for driver to fetch, an interrupt will be triggered and both SDIO function 1 and 2 will be flagged by default in bcm4329. These two interrupt flags are identical and only need to be handled once. Since there is no way to turn off one flag from the dongle side, a dummy handler for function 2 interrupt is placed. Reported-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: fmac: save bus interface structure in function 2 deviceFranky Lin1-2/+1
bus interface was stored in sdio card device. The device pointer is used as parameter of interface functions between common layer and bus layer to make the function declaration generic for different bus type. But the card device is a parent device layer for SDIO function devices. It doesn't contain all contexts needed by udev. This patch moves the shared structure to private driver data pointer of SDIO function 2 device which is more appopriate for net device and cfg80211 registration. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28brcm80211: fmac: introduce common bus interface struct brcmf_busFranky Lin1-1/+2
struct brcmf_bus will contain function porinter, bus specific private structure pointer and interface context of generic layer and bus layer. It will be the only shared structure between generic and bus layer. This patch is part of fullmac bus interface refactoring. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28brcm80211: fmac: remove unused parameter of brcmf_sdbrcm_probeFranky Lin1-1/+1
bus_no, slot, func and bustype are no longer needed by brcmf_sdbrcm_probe. This patch removes them. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28brcm80211: fmac: simplify the brcmf_sdioh_request_buffer() functionArend van Spriel1-5/+26
The function is only called with sk_buff parameter being non-zero so the prototype does not need to support passing a char buffer any longer. When the function is called with a NULL sk_buff parameter it returns -EINVAL now. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28brcm80211: fmac: remove width parameter from brcmf_sdioh_request_bufferArend van Spriel1-3/+3
The function brcmf_sdioh_request_buffer() was requiring a parameter in its prototype that was not used within the function. It has been removed consequently. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28brcm80211: fmac: separate receiving skb chain from other receive pathArend van Spriel1-19/+97
In the receive path the buffer used to store the receive data from the device can be a chain of sk_buff. It has been separated to allow the use of skb queues. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-01drivers/net: Add export.h to files using EXPORT_SYMBOL/THIS_MODULEPaul Gortmaker1-0/+1
These were getting the macros from an implicit module.h include via device.h, but we are planning to clean that up. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> drivers/net: Add export.h to wireless/brcm80211/brcmfmac/bcmsdh.c This relatively recently added file uses EXPORT_SYMBOL and hence needs export.h included so that it is compatible with the module.h split up work. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-11net: wireless: add brcm80211 driversArend van Spriel1-0/+371
Add the brcm80211 tree to drivers/net/wireless, and disable the version that's in drivers/staging. This version includes the sources currently in staging, plus any changes that have been sent out for review. Sources in staging will be deleted in a followup patch. Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 07:38:05 +0300