summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/bcm43xx
AgeCommit message (Collapse)AuthorFilesLines
2006-07-10[PATCH] bcm43xx: voluntary preemtion in the calibration loopsMichael Buesch1-15/+18
This patch adds voluntary preemption points into the PHY calibration loops to allow non-CONFIG_PREEMPT machines to not suffer from huge delays. CONFIG_PREEMPT machines are already fine, because all this code is run in non-atomic process context. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-10[PATCH] bcm43xx: opencoded lockingMichael Buesch7-164/+167
As many people don't seem to like the locking "obfuscation" in the bcm43xx driver, this patch removes it. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-10[PATCH] bcm43xx-softmac: Fix an off-by-one condition in handle_irq_noiseLarry Finger1-1/+1
An assert statement near the start of handle_irq_noise in the softmac version of bcm43xx_main.c is there to protect against out of bound addressing using variable bcm->noisecalc.nr_samples. The arrays in question have a dimension of 8, thus the value must be < 8. Signed-Off-By: Larry.Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] bcm43xx: enable shared key authenticationDaniel Drake1-0/+4
I recently patched softmac to enable shared key authentication. This small patch will enable crazy or unfortunate bcm43xx users to use this new capability. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] Convert bcm43xx-softmac to use the ieee80211_is_valid_channel routineLarry Finger3-30/+3
The current version of bcm43xx-softmac uses local routines to check if a channel is valid. As noted in the comments, these routines do not take any regulatory information into account. This patch converts the code to use the equivalent routine in ieee80211, which is being converted to know about regulatory information. Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] bcm43xx: workaround init_board vs. IRQ raceMichael Buesch1-13/+14
Place the Init-vs-IRQ workaround before any card register access, because we might not have the wireless core mapped at all times in init. So this will result in a Machine Check caused by a bus error. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] bcm43xx: use softmac-suggested TX rateDaniel Drake1-1/+4
Use Softmac-suggested TX ratecode: ieee80211softmac_suggest_txrate() Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-04kbuild: introduce utsrelease.hSam Ravnborg1-1/+1
include/linux/version.h contained both actual KERNEL version and UTS_RELEASE that contains a subset from git SHA1 for when kernel was compiled as part of a git repository. This had the unfortunate side-effect that all files including version.h would be recompiled when some git changes was made due to changes SHA1. Split it out so we keep independent parts in separate files. Also update checkversion.pl script to no longer check for UTS_RELEASE. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-07-03[PATCH] irq-flags: drivers/net: Use the new IRQF_ constantsThomas Gleixner1-1/+1
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] Add bcm43xx HW RNG supportMichael Buesch3-0/+44
Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-15[PATCH] pci: bcm43xx avoid pci_find_deviceJiri Slaby1-5/+16
bcm43xx avoid pci_find_device Change pci_find_device to safer pci_get_device with support for more devices. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-15[PATCH] bcm43xx: preemptible periodic workMichael Buesch4-13/+143
Make the heavy periodic work preemptible to avoid disabling local IRQs for several msecs. Signed-off-by: Michael Buesch <mb@buesch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-15[PATCH] bcm43xx: redesign lockingMichael Buesch8-191/+211
Redesign the bcm43xx locking. This is pre-work to get a preemptible periodic work handler. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-05[PATCH] bcm43xx: quiet down log spam from set_securityJason Lunz1-6/+7
The debug logging in bcm43xx_ieee80211_set_security() is pretty noisy. Make it more silent. Signed-off-by: Jason Lunz <lunz@falooley.org> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-05Merge branch 'upstream-fixes' into upstreamJohn W. Linville1-9/+22
2006-06-05[PATCH] bcm43xx: add DMA rx poll workaround to DMA4Michael Buesch1-9/+22
Also add the Poll RX DMA Memory workaround to the DMA4 (xmitstatus) path. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-17Merge branch 'upstream-fixes' into upstreamJohn W. Linville1-3/+3
2006-05-17[PATCH] bcm43xx: associate on 'ifconfig up'David Woodhouse1-3/+3
I still need this hack to work around the fact that softmac doesn't attempt to associate when we bring the device up... Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-06[PATCH] bcm43xx: add PCI ID for bcm4319Stefano Brivio1-0/+2
Add PCI ID for bcm4319. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-06[PATCH] bcm43xx: fix whitespaceStefano Brivio1-3/+3
Fix whitespace. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-06Merge branch 'upstream-fixes' into upstreamJohn W. Linville4-23/+37
2006-05-06[PATCH] bcm43xx: Fix access to non-existent PHY registersDavid Woodhouse1-1/+1
Fix the conditions under which we poke at the APHY registers in bcm43xx_phy_initg() to avoid a machine check on chips where they don't exist. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-06[PATCH] bcm43xx: Fix array overrun in bcm43xx_geo_initMichael Buesch2-19/+30
The problem here is that the bcm34xx driver and the ieee80211 stack do not agree on what channels are possible for 802.11a. The ieee80211 stack only wants channels between 34 and 165, while the bcm43xx driver accepts anything from 0 to 200. I made the bcm43xx driver comply with the ieee80211 stack expectations, by using the proper constants. Signed-off-by: Jean Delvare <jdelvare@suse.de> [mb]: Reduce stack usage by kzalloc-ing ieee80211_geo Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-06[PATCH] bcm43xx: check for valid MAC address in SPROMStefano Brivio1-1/+1
Check for valid MAC address in SPROM fields instead of relying on PHY type while setting the MAC address in the networking subsystem, as some devices have multiple PHYs. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-06[PATCH] bcm43xx: fix iwmode crash when downMichael Buesch1-2/+5
This fixes a crash when iwconfig ethX mode foo is done before ifconfig ethX up or after ifconfig ethX down Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-25[PATCH] bcm43xx: use pci_iomap() for convenience.Michael Buesch3-23/+7
This reduces codesize. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24[PATCH] bcm43xx: make PIO mode usableMichael Buesch3-32/+84
This patch fixes PIO mode on the softmac bcm43xx driver. (A dscape patch will follow). It mainly fixes endianess issues. This patch is tested on PowerPC32 and i386. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-20[PATCH] bcm43xx: iw_priv_args names should be <16 charactersErik Mouw1-4/+4
The room for the names in bcm43xx_priv_wx_args[] are IFNAMSIZ long and IFNAMSIZ is defined as 16, so the names in bcm43xx_priv_wx_args should be 15 characters (16 including the trailing \0). This patch fixes that for the "set_shortpreambl", "get_shortpreambl", "set_swencryption", and "get_swencryption" private calls. Patch is against 2.6.17-rc1. Signed-off-by: Erik Mouw <erik@harddisk-recovery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-20[PATCH] bcm43xx: sysfs code cleanupMichael Buesch4-67/+82
This cleans up the bcm43xx sysfs code and makes it compliant with the unwritten sysfs rules (at least I hope so). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-20[PATCH] bcm43xx: fix pctl slowclock limit calculationMichael Buesch2-47/+77
This fixes coverity bug: http://marc.theaimsgroup.com/?l=linux-netdev&m=114417628413880&w=2 Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-20[PATCH] bcm43xx: fix dyn tssi2dbm memleakAdrian Bunk1-0/+1
This patch fixes a memory leak spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-20[PATCH] bcm43xx: fix config menu alignmentRandy Dunlap1-0/+3
Use "depends on" to make all bcm43xx driver options be listed at the same level. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-20[PATCH] bcm43xx wireless: fix printk format warningsRandy Dunlap2-10/+11
Fix printk format warnings: drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:456: warning: format ‘%u’ expects type ‘unsigned int’, but argument 3 has type ‘size_t’ drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:460: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘size_t’ drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:476: warning: format ‘%u’ expects type ‘unsigned int’, but argument 3 has type ‘size_t’ drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:480: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘size_t’ drivers/net/wireless/bcm43xx/bcm43xx_dma.c:200: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘dma_addr_t’ drivers/net/wireless/bcm43xx/bcm43xx_dma.c:311: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘dma_addr_t’ drivers/net/wireless/bcm43xx/bcm43xx_dma.c:733: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘dma_addr_t’ Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-20[PATCH] bcm43xx: set trans_start on TX to prevent bogus timeoutsMichael Buesch1-0/+1
Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: don't set the channel on a device, which is down.Michael Buesch1-3/+9
Initial patch by David Woodhouse and Michael Marineau. Locking fix by me. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: sync GPHY init with the specs.Michael Buesch3-29/+255
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: fix the remaining sparse warnings.Michael Buesch2-5/+10
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: remove some compilerwarnings.Michael Buesch4-60/+13
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: fix "include" issues on some platforms.Michael Buesch2-2/+2
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: get rid of "/* vim: ..." lines at the end of several files.Michael Buesch8-16/+0
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: add useless and broken statistics stuff. People seem to ↵Michael Buesch3-4/+53
want it. well... Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: fix nrssi_threshold calculation.Michael Buesch1-39/+33
patch by doctorzoidberg. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: sync interference mitigation code to the specs.Michael Buesch2-150/+309
This also includes a rewritten valuesave-stack. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: set default attenuation values.Michael Buesch5-38/+158
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: some IRQ handler cleanups.Michael Buesch1-35/+30
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: merge all iwmode code into the set_iwmode function.Michael Buesch1-36/+29
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: fix some gpio register trashing (hopefully :D)Michael Buesch3-43/+46
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: remove check for mmio length, as it differs among ↵Michael Buesch1-26/+4
platforms. (especially embedded) Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: properly mask txctl1 before writing it to hardware.Michael Buesch1-2/+2
This should not make a difference, but be careful to not trash the register. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Do boardflags workarounds for specific boards.Michael Buesch2-0/+13
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-15 23:37:49 +0300