summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/b43
AgeCommit message (Collapse)AuthorFilesLines
2014-07-09b43: fix frequency reported on G-PHY with /new/ firmwareRafał Miłecki1-3/+7
commit 2fc68eb122c7ea6cd5be1fe7d6650c0beb2f4f40 upstream. Support for firmware rev 508+ was added years ago, but we never noticed it reports channel in a different way for G-PHY devices. Instead of offset from 2400 MHz it simply passes channel id (AKA hw_value). So far it was (most probably) affecting monitor mode users only, but the following recent commit made it noticeable for quite everybody: commit 3afc2167f60a327a2c1e1e2600ef209a3c2b75b7 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Tue Mar 4 16:50:13 2014 +0200 cfg80211/mac80211: ignore signal if the frame was heard on wrong channel Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-08b43: ensue that BCMA is "y" when B43 is "y"Hauke Mehrtens1-2/+2
commit 693026ef2e751fd94d2e6c71028e68343cc875d5 upstream. When b43 gets build into the kernel and it should use bcma we have to ensure that bcma was also build into the kernel and not as a module. In this patch this is also done for SSB, although you can not build b43 without ssb support for now. This fixes a build problem reported by Randy Dunlap in 5187EB95.2060605@infradead.org Reported-By: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Qiang Huang <h.huangqiang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-13b43: Fix machine check error due to improper access of B43_MMIO_PSM_PHY_HDRRafał Miłecki1-7/+7
commit 12cd43c6ed6da7bf7c5afbd74da6959cda6d056b upstream. Register B43_MMIO_PSM_PHY_HDR is 16 bit one, so accessing it with 32b functions isn't safe. On my machine it causes delayed (!) CPU exception: Disabling lock debugging due to kernel taint mce: [Hardware Error]: CPU 0: Machine Check Exception: 4 Bank 4: b200000000070f0f mce: [Hardware Error]: TSC 164083803dc mce: [Hardware Error]: PROCESSOR 2:20fc2 TIME 1396650505 SOCKET 0 APIC 0 microcode 0 mce: [Hardware Error]: Run the above through 'mcelog --ascii' mce: [Hardware Error]: Machine check: Processor context corrupt Kernel panic - not syncing: Fatal machine check on current CPU Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06b43: fix the wrong assignment of status.freq in b43_rx()ZHAO Gang1-2/+2
commit 64e5acb09ca6b50c97299cff9ef51299470b29f2 upstream. Use the right function to update frequency value. If rx skb is probe response or beacon, the wrong frequency value can cause problem that bss info can't be updated when it should be. Fixes: 8318d78a44d4 ("cfg80211 API for channels/bitrates, mac80211 and driver conversion") Signed-off-by: ZHAO Gang <gamerh2o@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06b43: Fix unload oops if firmware is not availableLarry Finger2-7/+7
commit 0673effd41dba323d6a280ef37b5ef29f3f5a653 upstream. The asyncronous firmware load uses a completion struct to hold firmware processing until the user-space routines are up and running. There is. however, a problem in that the waiter is nevered canceled during teardown. As a result, unloading the driver when firmware is not available causes an oops. To be able to access the completion structure at teardown, it had to be moved into the b43_wldev structure. This patch also fixes a typo in a comment. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06b43: Fix lockdep splatLarry Finger1-6/+11
commit 09164043f63c947a49797750a09ca1cd7c31108e upstream. In https://bugzilla.kernel.org/show_bug.cgi?id=67561, a locking dependency is reported when b43 is used with hostapd, and rfkill is used to kill the radio output. The lockdep splat (in part) is as follows: ====================================================== [ INFO: possible circular locking dependency detected ] 3.12.0 #1 Not tainted ------------------------------------------------------- rfkill/10040 is trying to acquire lock: (rtnl_mutex){+.+.+.}, at: [<ffffffff8146f282>] rtnl_lock+0x12/0x20 but task is already holding lock: (rfkill_global_mutex){+.+.+.}, at: [<ffffffffa04832ca>] rfkill_fop_write+0x6a/0x170 [rfkill] --snip-- Chain exists of: rtnl_mutex --> misc_mtx --> rfkill_global_mutex The fix is to move the initialization of the hardware random number generator outside the code range covered by the rtnl_mutex. Reported-by: yury <urykhy@gmail.com> Tested-by: yury <urykhy@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-20b43: stop format string leaking into error msgsKees Cook1-1/+1
commit e0e29b683d6784ef59bbc914eac85a04b650e63c upstream. The module parameter "fwpostfix" is userspace controllable, unfiltered, and is used to define the firmware filename. b43_do_request_fw() populates ctx->errors[] on error, containing the firmware filename. b43err() parses its arguments as a format string. For systems with b43 hardware, this could lead to a uid-0 to ring-0 escalation. CVE-2013-2852 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-19B43: Handle DMA RX descriptor underrunThommy Jakobsson3-26/+40
commit 73b82bf0bfbf58e6ff328d3726934370585f6e78 upstream. Add handling of rx descriptor underflow. This fixes a fault that could happen on slow machines, where data is received faster than the CPU can handle. In such a case the device will use up all rx descriptors and refuse to send any more data before confirming that it is ok. This patch enables necessary interrupt to discover such a situation and will handle them by dropping everything in the ring buffer. Reviewed-by: Michael Buesch <m@bues.ch> Signed-off-by: Thommy Jakobsson <thommyj@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-26ssb: implement spurious tone avoidanceRafał Miłecki1-1/+2
commit 46fc4c909339f5a84d1679045297d9d2fb596987 upstream. And make use of it in b43. This fixes a regression introduced with 49d55cef5b1925a5c1efb6aaddaa40fc7c693335 b43: N-PHY: implement spurious tone avoidance This commit made BCM4322 use only MCS 0 on channel 13, which of course resulted in performance drop (down to 0.7Mb/s). Reported-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05b43: N-PHY: use more bits for offset in RSSI calibrationRafał Miłecki1-2/+2
commit 2e1253d640eb7f8707d2591c93097c1e9f9c71d5 upstream. When calculating "offset" for final RSSI calibration we're using numbers bigger than s8 can hold. We have for example: offset[j] = 232 - poll_results[j]; formula. If poll_results[j] is small enough (it usually is) we treat number's bit as a sign bit. For example 232 - 1 becomes: 0xE8 - 0x1 = 0xE7, which is not 231 but -25. This code was introduced in e0c9a0219a8f542e3946fe972a68aacf8c3f906c and caused stability regression on some cards, for ex. BCM4322. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-05b43: A fix for DMA transmission sequence errorsIestyn C. Elfick1-12/+53
commit b251412db99ccd4495ce372fec7daee27bf06923 upstream. Intermittently, b43 will report "Out of order TX status report on DMA ring". When this happens, the driver must be reset before communication can resume. The cause of the problem is believed to be an error in the closed-source firmware; however, all versions of the firmware are affected. This change uses the observation that the expected status is always 2 less than the observed value, and supplies a fake status report to skip one header/data pair. Not all devices suffer from this problem, but it can occur several times per second under heavy load. As each occurence kills the unmodified driver, this patch makes if possible for the affected devices to function. The patch logs only the first instance of the reset operation to prevent spamming the logs. Tested-by: Chris Vine <chris@cvine.freeserve.co.uk> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05b43: N-PHY: increase initial value of "mind" in RSSI calibrationRafał Miłecki1-2/+2
commit e67dd874e60529dbd2e8232babb1e23479ba2ffa upstream. We're using "mind" variable to find the VCM that got the best polling results. For each VCM we calculte "currd" which is compared to the "mind". For PHY rev3+ "currd" gets values around 14k-40k. Looking for a value smaller than 40 makes no sense, so increase the initial value. This fixes a regression introduced in 3.4 by commit: e0c9a0219a8f542e3946fe972a68aacf8c3f906c (my BCM4322 performance dropped from 18,4Mb/s to 9,26Mb/s) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28b43: Increase number of RX DMA slotsLarry Finger1-1/+1
commit ccae0e50c16a7f7adb029c169147400d1ce9f703 upstream. Bastian Bittorf reported that some of the silent freezes on a Linksys WRT54G were due to overflow of the RX DMA ring buffer, which was created with 64 slots. That finding reminded me that I was seeing similar crashed on a netbook, which also has a relatively slow processor. After increasing the number of slots to 128, runs on the netbook that previously failed now worked; however, I found that 109 slots had been used in one test. For that reason, the number of slots is being increased to 256. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Bastian Bittorf <bittorf@bluebottle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17b43: Fix firmware loading when driver is built into the kernelLarry Finger3-16/+48
commit 5e20a4b53094651d80f856ff55a916b999dbb57a upstream. Recent versions of udev cause synchronous firmware loading from the probe routine to fail because the request to user space would time out. The original fix for b43 (commit 6b6fa58) moved the firmware load from the probe routine to a work queue, but it still used synchronous firmware loading. This method is OK when b43 is built as a module; however, it fails when the driver is compiled into the kernel. This version changes the code to load the initial firmware file using request_firmware_nowait(). A completion event is used to hold the work queue until that file is available. This driver reads several firmware files - the remainder can be read synchronously. On some test systems, the async read fails; however, a following synch read works, thus the async failure falls through to the sync try. Reported-and-Tested by: Felix Janda <felix.janda@posteo.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11b43: fix tx path skb leaksFelix Fietkau3-8/+15
commit 78f18df4b323d2ac14d6c82e2fc3c8dc4556bccc upstream. ieee80211_free_txskb() needs to be used instead of dev_kfree_skb_any for tx packets passed to the driver from mac80211 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-05b43: Fix oops on unload when firmware not foundLarry Finger1-0/+2
commit f89ff6441df06abc2d95f3ef67525923032d6283 upstream. When b43 fails to find firmware when loaded, a subsequent unload will oops due to calling ieee80211_unregister_hw() when the corresponding register call was never made. Commit 2d838bb608e2d1f6cb4280e76748cb812dc822e7 fixed the same problem for b43legacy. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Markus Kanet <dvmailing@gmx.eu> Cc: Markus Kanet <dvmailing@gmx.eu> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-27b43: only reload config after successful initializationSeth Forshee1-2/+8
Commit 2a19032 (b43: reload phy and bss settings after core restarts) introduced an unconditional call to b43_op_config() at the end of b43_op_start(). When firmware fails to load this can wedge the system. There's no need to reload the configuration after a failed initialization anyway, so only make the call if initialization was successful. BugLink: http://bugs.launchpad.net/bugs/950295 Cc: Felix Fietkau <nbd@openwrt.org> Cc: <stable@vger.kernel.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-06simple_open: automatically convert to simple_open()Stephen Boyd1-7/+1
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-13b43: Load firmware from a work queue and not from the probe routineLarry Finger2-27/+35
Recent changes in udev are causing problems for drivers that load firmware from the probe routine. As b43 has such a structure, it must be changed. As this driver loads more than 1 firmware file, changing to the asynchronous routine request_firmware_nowait() would be complicated. In this implementation, the probe routine starts a queue that calls the firmware loading routines. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06b43: prevent firmware on bcm5354 from taking over wrong GPIO pinsHauke Mehrtens1-0/+2
When using the bcm5354 (Soc with integrated LP-PHY Wifi) with a recent firmware >= 478.104 it runs out of memory after a very short time in OpenWrt after doing an active scan or any thing else where packages are send. This was cased by a gpio misconfiguration, the firmware triggered the GPIO pins used for buttons on some devices and that caused an other driver (OpenWrt diag) listening for these buttons irqs to send many messages to the user space. This patch fixes the bug for my devices (Asus WL-520GU) and makes it work with firmware 666.2. Now the firmware just uses LED GPIO pin number 1 and not the button pins any more. This is the GPIO Pin layout used on my device, see [0]. GPIO pin layout: pin# name type 0 power led 1 wlan led 2 reset button 3 ses buttom This is the nvram configuration output of "nvram show |grep gpio" related nvram configuration: wl0gpio2=11 wl0gpio3=11 wl0gpio0=11 wl0gpio1=0x02 reset_gpio=2 [0]: https://dev.openwrt.org/browser/trunk/package/broadcom-diag/src/diag.c Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-01Merge branch 'master' of ↵John W. Linville2-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-01-24b43: N-PHY: trivial: change save&rest order in RSSI pollingRafał Miłecki1-8/+8
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: N-PHY: implement RSSI calibration for rev3+Rafał Miłecki1-6/+187
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: N-PHY: upload PAPD PGA gain delta tableRafał Miłecki3-6/+12
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: N-PHY: fix typos in RF controlRafał Miłecki2-6/+6
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: N-PHY: add helper for getting gain tableRafał Miłecki3-94/+64
Also move the code to tables file. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: N-PHY: implement TX power control setupRafał Miłecki2-1/+217
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24b43: add maskset helpersRafał Miłecki3-57/+36
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-18b43: add option to avoid duplicating device support with brcmsmacJohn W. Linville2-0/+8
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-13wireless: b43: fix Oops on card eject during transferGuennadi Liakhovetski1-1/+4
An Oops has once been observed, when the SDIO card had been ejected during IO. The PC value shows, that the dev pointer in b43_op_stop() was NULL. (I moved the NULL check before the lock, based upon a suggestion from Julian Calaby <julian.calaby@gmail.com>. -- JWL) Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-05Merge branch 'master' of ↵John W. Linville4-130/+348
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/b43legacy/dma.c
2012-01-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+13
2012-01-04b43: N-PHY: fix typo in TX power fixRafał Miłecki1-1/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: N-PHY: fix controling RF overrideRafał Miłecki1-2/+2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: N-PHY: update gain ctl workaroundsRafał Miłecki2-18/+92
Specs were updated, now we match wl according to MMIO dumps. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: add lacking boardflags definesRafał Miłecki1-0/+11
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: N-PHY: get idle TSSI valuesRafał Miłecki2-1/+130
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: N-PHY: fix success condition of running samplesRafał Miłecki1-1/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04b43: N-PHY: move common TX/RX functionsRafał Miłecki1-107/+111
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04Merge branch 'master' of ↵John W. Linville1-3/+13
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-01-04Merge branch 'master' of ↵John W. Linville4-1772/+1840
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/b43/dma.c drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
2012-01-03b43: fix regression in PIO caseGuennadi Liakhovetski1-3/+13
This patch fixes the regression, introduced by commit 17030f48e31adde5b043741c91ba143f5f7db0fd From: Rafał Miłecki <zajec5@gmail.com> Date: Thu, 11 Aug 2011 17:16:27 +0200 Subject: [PATCH] b43: support new RX header, noticed to be used in 598.314+ fw in PIO case. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-20net: fix assignment of 0/1 to bool variables.Rusty Russell10-101/+101
DaveM said: Please, this kind of stuff rots forever and not using bool properly drives me crazy. Joe Perches <joe@perches.com> gave me the spatch script: @@ bool b; @@ -b = 0 +b = false @@ bool b; @@ -b = 1 +b = true I merely installed coccinelle, read the documentation and took credit. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-19b43: N-PHY: reorder functions: random cleanupsRafał Miłecki1-107/+116
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19b43: N-PHY: reorder functions: move rest of workaroundsRafał Miłecki1-226/+226
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19b43: N-PHY: reorder functions: move RSSI calibrationRafał Miłecki1-300/+300
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19b43: N-PHY: split gain control workaroundsRafał Miłecki1-264/+267
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19b43: N-PHY: reorder functions: collect RSSI selectsRafał Miłecki1-221/+225
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19b43: N-PHY: reorder functions: collect samples onesRafał Miłecki1-131/+135
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19b43: N-PHY: reorder functions: collect radio onesRafał Miłecki1-190/+198
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-04 17:27:23 +0300