summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)AuthorFilesLines
2014-09-18ath10k: fix use of multiple blank linesKalle Valo13-29/+0
Fixes checkpatch warnings: CHECK: Please don't use multiple blank lines Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-18ath10k: fix checkpatch warnings about parenthesis alignmentKalle Valo9-51/+55
CHECK: Alignment should match open parenthesis Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-18ath10k: fix parenthesis alignment warning in ath10k_htt_rx_alloc()Kalle Valo1-3/+4
Fixes checkpatch warning: ath10k/htt_rx.c:519: CHECK: Alignment should match open parenthesis Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-17ath9k: enable ext channel pulse detectionLorenzo Bianconi1-0/+1
Enable pulse detection on extension channel if 40MHz channel width has been set Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: Fix build errorSujith Manoharan1-0/+2
This happens when CONFIG_ATH9K_CHANNEL_CONTEXT is not enabled. ../drivers/net/wireless/ath/ath9k/recv.c: In function ‘ath_rx_ps_beacon’: ../drivers/net/wireless/ath/ath9k/recv.c:553:27: error: ‘struct ath_softc’ has no member named ‘offchannel’ if (sc->cur_chan == &sc->offchannel.chan) ^ ../scripts/Makefile.build:257: recipe for target 'drivers/net/wireless/ath/ath9k/recv.o' failed make[10]: *** [drivers/net/wireless/ath/ath9k/recv.o] Error 1 ../scripts/Makefile.build:404: recipe for target 'drivers/net/wireless/ath/ath9k' failed make[9]: *** [drivers/net/wireless/ath/ath9k] Error 2 Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: initialize ath_node linked listLorenzo Bianconi1-0/+4
Initialize neighbor linked list used by dynack to compute ACK timeout as the maximum STA ACK timeout Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: enable dynack using set_coverage_class codepathLorenzo Bianconi1-4/+29
Enable ACK timeout estimation algorithm if set_coverage_class routine has been called with negative coverage_class parameter. Dynack is automatically disabled setting valid value for coverage class Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: add debugfs support for dynackLorenzo Bianconi1-0/+28
Add ack_to entry to debugfs in order to dump current ACK timeout value Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: enable control frame receptionLorenzo Bianconi1-1/+2
Set control frame bit in rx filter if dynack processing has been activated in order to enable ACK frame reception Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: add sampling methods for (tx|rx) timestampLorenzo Bianconi2-0/+10
Add sampling methods for ACK RX timestamp in ath_rx_tasklet() and for TX frame timestamp in ath_tx_complete_aggr() and in ath_tx_process_buffer(). These samples will be used in dynack processing for ACK timeout estimation Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: do not overwrite ACK timeout estimationLorenzo Bianconi1-0/+8
Do not overwrite ACK timeout estimation in ath9k_hw_init_global_settings() if dynack processing has been enabled Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: add config for (en|dis)abling ACK timeout estimationLorenzo Bianconi2-0/+12
Add ACK timeout estimation algorithm to ath9k Makefile and Kconfig Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: add dynamic ACK timeout estimationLorenzo Bianconi6-0/+464
Add dynamic ACK timeout estimation algorithm based on ACK frame RX timestamp, TX frame timestamp and frame duration. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Tested-by: Philippe Duchein <wireless-dev@duchein.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: add duration field to ath_tx_statusLorenzo Bianconi3-0/+17
Add duration field to ath_tx_status in order to report frame duration for each entry in multi-retry chain. These fields will be used in ACK timeout estimation algorithm (dynack) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: export methods related to ACK timeout estimationLorenzo Bianconi2-3/+7
Remove static keyword and export ath9k_hw_setslottime(), ath9k_hw_set_ack_timeout() and ath9k_hw_set_cts_timeout() in hw.h. These methods will be used in ACK timeout estimation algorithm (dynack) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k_htc: fix random decryption failureJohannes Stezenbach1-1/+1
In v3.15 the driver stopped to accept network packets after successful authentification, which could be worked around by passing the nohwcrypt=1 module parameter. This was not reproducible by everyone, and showed random behaviour in some tests. It was caused by an uninitialized variable introduced in 4ed1a8d4a257 ("ath9k_htc: use ath9k_cmn_rx_accept") and used in 341b29b9cd2f ("ath9k_htc: use ath9k_cmn_rx_skb_postprocess"). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=78581 Fixes: 341b29b9cd2f ("ath9k_htc: use ath9k_cmn_rx_skb_postprocess") Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: Fix primary station configurationSujith Manoharan1-5/+1
Assign 'primary_sta' to the active primary station interface after iterating over the list of interfaces. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: Remove useless opmode checkSujith Manoharan1-7/+0
The opmode is verified to be NL80211_IFTYPE_STATION before calling ath9k_set_assoc_state(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: Set offchannel state properlySujith Manoharan1-15/+42
When switching offchannel, BSS related information in the HW has to be reset to default values. Add a routine to do this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: Check beaconing mode properlySujith Manoharan1-0/+3
In MCC mode, the TSF of a context needs to be adjusted only if it is GO/AP. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: Remove unnecessary tbtt assignmentSujith Manoharan3-6/+5
The next_tbtt variable in the scheduler is needed only for GO/AP mode operation and is always read from the NEXT_TBTT_TIMER in the HW. There is no need to store the timestamp for received beacons. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15fixup! wil6210: fix usage of print_hex_dump_debugVladimir Kondratiev1-6/+13
Use empty inline functions instead of empty #define. Fix for "unused variable" as reported below: tree: git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next.git master head: 167bf96dd87d2a8360cb9e9783006876dac4f579 commit: 871d8c4bbb0f23c29a21b63b1801071766f69b51 [45/62] wil6210: fix usage of print_hex_dump_debug config: i386-allyesconfig reproduce: git checkout 871d8c4bbb0f23c29a21b63b1801071766f69b51 make ARCH=i386 allyesconfig make ARCH=i386 All warnings: drivers/net/wireless/ath/wil6210/wmi.c: In function 'wmi_evt_rx_mgmt': >> drivers/net/wireless/ath/wil6210/wmi.c:341:10: warning: unused variable 'ie_len' [-Wunused-variable] size_t ie_len = d_len - offsetof(struct ieee80211_mgmt, ^ >> drivers/net/wireless/ath/wil6210/wmi.c:340:13: warning: unused variable 'ie_buf' [-Wunused-variable] const u8 *ie_buf = rx_mgmt_frame->u.beacon.variable; ^ vim +/ie_len +341 drivers/net/wireless/ath/wil6210/wmi.c 2be7d22f Vladimir Kondratiev 2012-12-20 334 2be7d22f Vladimir Kondratiev 2012-12-20 335 if (ieee80211_is_beacon(fc) || ieee80211_is_probe_resp(fc)) { 2be7d22f Vladimir Kondratiev 2012-12-20 336 struct cfg80211_bss *bss; 8eea944a Vladimir Kondratiev 2014-06-16 337 u64 tsf = le64_to_cpu(rx_mgmt_frame->u.beacon.timestamp); 8eea944a Vladimir Kondratiev 2014-06-16 338 u16 cap = le16_to_cpu(rx_mgmt_frame->u.beacon.capab_info); 8eea944a Vladimir Kondratiev 2014-06-16 339 u16 bi = le16_to_cpu(rx_mgmt_frame->u.beacon.beacon_int); 8eea944a Vladimir Kondratiev 2014-06-16 340 const u8 *ie_buf = rx_mgmt_frame->u.beacon.variable; 8eea944a Vladimir Kondratiev 2014-06-16 341 size_t ie_len = d_len - offsetof(struct ieee80211_mgmt, 8eea944a Vladimir Kondratiev 2014-06-16 342 u.beacon.variable); 8eea944a Vladimir Kondratiev 2014-06-16 343 wil_dbg_wmi(wil, "Capability info : 0x%04x\n", cap); 8eea944a Vladimir Kondratiev 2014-06-16 344 wil_dbg_wmi(wil, "TSF : 0x%016llx\n", tsf); :::::: The code at line 341 was first introduced by commit :::::: 8eea944af0efcdba09dac1ad220c9bfa68293279 wil6210: print more info about BSS found Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: Fix beacon processing in offchannelSujith Manoharan1-1/+9
When interfaces of different types are present in a context and an offchannel request is received on a STA interface, we end up trying to process beacons received when we are offchannel. This hits the below warning since offchannel will not have proper beacon parameters. Fix this by not processing beacons received when we are offchannel. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at ../drivers/net/wireless/ath/ath9k/recv.c:552 ath_rx_tasklet+0xf8f/0x1020 [ath9k]() CPU: 1 PID: 0 Comm: swapper/1 Tainted: G O 3.17.0-rc4-wl-debug #16 Hardware name: LENOVO 28427ZQ/INVALID, BIOS 6JET58WW (1.16 ) 09/17/2009 0000000000000000 15916787056abba3 ffff88013b603d08 ffffffff8156af94 ffff88013b603d50 ffff88013b603d40 ffffffff81070dbd ffff8800a84bb300 ffff8800b05db358 ffff8800a84cc578 ffff8800a84bb300 ffff8800b05daa40 Call Trace: <IRQ> [<ffffffff8156af94>] dump_stack+0x4d/0x6f [<ffffffff81070dbd>] warn_slowpath_common+0x7d/0xa0 [<ffffffff81070e3c>] warn_slowpath_fmt+0x5c/0x80 [<ffffffff81572143>] ? _raw_spin_lock_irqsave+0x83/0xa0 [<ffffffffa09d04a6>] ? ath_rx_tasklet+0x9f6/0x1020 [ath9k] [<ffffffffa09d0a3f>] ath_rx_tasklet+0xf8f/0x1020 [ath9k] [<ffffffffa09cd4f4>] ath9k_tasklet+0xf4/0x310 [ath9k] [<ffffffff81075a97>] tasklet_action+0xe7/0xf0 [<ffffffff8107508a>] __do_softirq+0x12a/0x340 [<ffffffff8107544e>] irq_exit+0x9e/0xc0 [<ffffffff81575e56>] do_IRQ+0x56/0xe0 [<ffffffff81573c72>] common_interrupt+0x72/0x72 <EOI> [<ffffffff81421037>] ? cpuidle_enter_state+0x67/0x1a0 [<ffffffff81421257>] cpuidle_enter+0x17/0x20 [<ffffffff810b3ebe>] cpu_startup_entry+0x3ce/0x420 [<ffffffff81048563>] start_secondary+0x233/0x2c0 ---[ end trace f15c3e33ba78d840 ]--- ------------[ cut here ]------------ Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: fix radar parameters initializationLorenzo Bianconi2-2/+5
Move ath9k_hw_set_radar_params() in ath9k_hw_reset() in order to avoid AR_PHY_RADAR registers are overwritten after hw reset Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15Merge tag 'mac80211-next-for-john-2014-09-12' of ↵John W. Linville4-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg <johannes@sipsolutions.net> says: "This time, I have some rate minstrel improvements, support for a very small feature from CCX that Steinar reverse-engineered, dynamic ACK timeout support, a number of changes for TDLS, early support for radio resource measurement and many fixes. Also, I'm changing a number of places to clear key memory when it's freed and Intel claims copyright for code they developed." Conflicts: net/mac80211/iface.c Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-12ath10k: fix debugfs_create_dir() checkingMichal Kazior1-2/+6
The function may return an -ENODEV if debugfs is disabled in kernel. This should originally be guarded by ath10k's Kconfig but it still makes sense to check for the non-NULL errno return value. Reported-by: Matteo Croce <matteo@openwrt.org> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-12ath10k: support firmware crash-by-assertBen Greear1-1/+27
10.1 firmware does not have an official way to cause assert on purpose, but it can be done with carefully crafted WMI command. This is a different kind of crash from the 'hard' crash, which is a bad memory dereference. Different crashes decode in different manners, so this will help the crash-report testing as well as offer better ways to test firmware failure and recovery. kvalo: move the wmi command creation to debug.c, modify the info print Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-12ath10k: add testmodeKalle Valo11-30/+614
Add testmode interface for starting and using UTF firmware which is used to run factory tests. This is implemented by adding new state ATH10K_STATE_UTF and user space can enable this state with ATH10K_TM_CMD_UTF_START command. To go back to normal mode user space can send ATH10K_TM_CMD_UTF_STOP. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-12ath10k: make ath10k_wmi_cmd_send() publicKalle Valo2-3/+6
We need this function to send wmi packets from testmode.c. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-11ath9k: Fix beacon miss handlingSujith Manoharan2-12/+33
The NoA duration for a GO is half the beacon interval and a concurrent context like a STA can be active only for that duration, before switching back to the GO's operating channel. Currently, when multiple beacons are missed, the dwell time for the STA context is extended to improve the chances of receiving a beacon. But the NoA is not updated and this will cause problems since the GO is offline for a period that is longer than the advertised duration. Fix this by ensuring that the NoA is updated first before extending the time slot for the STA context. Also make sure that non-periodic NoA is used for a one-time, longer absence period. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11ath9k: Fix channel switch time durationSujith Manoharan1-1/+1
Since the NoA duration is the maximum time the GO interface can be offline, it needs to include the time take to switch channels in the HW. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11ath9k: Clear offchannel duration properlySujith Manoharan1-1/+4
Clearing the offchannel duration value in the scheduler unconditionally breaks NoA when multiple contexts are active and an offchannel request is deferred, for example, in a scan run. Fix this by clearing the duration only if there is no pending offchannel request. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11ath9k: Fix Notice of Absence issuesSujith Manoharan2-37/+75
* The index has to incremented only when advertising a new NoA schedule. * Switch to non-periodic NoA when starting a scan operation and multiple channel contexts are active. * Make sure that periodic NoA is advertised again when scan ends. Since the offchannel timer moves the offchannel state to IDLE after the GO operating channel becomes active, use a flag "force_noa_update" to update the NoA contents. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11ath9k: Assign offchannel duration properlySujith Manoharan1-2/+7
In multi-channel mode, an offchannel request will be deferred if both contexts are active. The duration of the offchannel operation is calculated but is not stored in the scheduler state. Fix this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: fix PTR_ERR() usage after initialization to constantVladimir Kondratiev1-1/+3
Reported by coccinelle: tree: git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next.git master head: 6a5d088a923854569e20eac4f3f569926d5911ec commit: b7cde47009640b88cb3629ee7078a43bc2642459 [18/80] wil6210: convert debugfs to the table mode coccinelle warnings: (new ones prefixed by >>) >> drivers/net/wireless/ath/wil6210/debugfs.c:327:17-24: ERROR: PTR_ERR applied after initialization to constant on line 304 vim +327 drivers/net/wireless/ath/wil6210/debugfs.c 298 struct dentry *dbg, void *base, 299 const struct dbg_off * const tbl) 300 { 301 int i; 302 303 for (i = 0; tbl[i].name; i++) { > 304 struct dentry *f = NULL; 305 306 switch (tbl[i].type) { 307 case doff_u32: 308 f = debugfs_create_u32(tbl[i].name, tbl[i].mode, dbg, 309 base + tbl[i].off); 310 break; 311 case doff_x32: 312 f = debugfs_create_x32(tbl[i].name, tbl[i].mode, dbg, 313 base + tbl[i].off); 314 break; 315 case doff_ulong: 316 f = wil_debugfs_create_ulong(tbl[i].name, tbl[i].mode, 317 dbg, base + tbl[i].off); 318 break; 319 case doff_io32: 320 f = wil_debugfs_create_iomem_x32(tbl[i].name, 321 tbl[i].mode, dbg, 322 base + tbl[i].off); 323 break; 324 } 325 if (IS_ERR_OR_NULL(f)) 326 wil_err(wil, "Create file \"%s\": err %ld\n", > 327 tbl[i].name, PTR_ERR(f)); 328 } 329 } 330 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: fix for oops while stopping interfaceVladimir Kondratiev5-25/+55
When interface stopped while running intensive Rx traffic, the following oops observed: [89846.734683] Call trace: [89846.737117] [<ffffffc00083aa64>] dev_gro_receive+0xac/0x358 [89846.742674] [<ffffffc00083ae94>] napi_gro_receive+0x24/0xa4 [89846.748251] [<ffffffbffc1c2f88>] $x+0xec/0x1f8 [wil6210] wil_netif_rx_any [89846.753547] [<ffffffbffc1c4830>] $x+0x34/0x54 [wil6210] wil_release_reorder_frame [89846.758755] [<ffffffbffc1c48ac>] wil_release_reorder_frames+0x5c/0x78 [wil6210] [89846.766044] [<ffffffbffc1c4bf8>] wil_tid_ampdu_rx_free+0x20/0x48 [wil6210] [89846.772901] [<ffffffbffc1bedc8>] $x+0x190/0x1e8 [wil6210] [89846.778285] [<ffffffbffc1c0ed4>] wmi_event_worker+0x230/0x2f8 [wil6210] [89846.784865] [<ffffffc0000b0bc8>] process_one_work+0x278/0x3fc [89846.790591] [<ffffffc0000b1218>] worker_thread+0x200/0x330 [89846.796060] [<ffffffc0000b6664>] kthread+0xac/0xb8 [89846.800836] Code: b940c661 f9406a62 8b010041 f9400026 (f8636882) [89846.807008] ---[ end trace d6fdc17cd27d18f6 ]--- Reason is the following: when removing Rx vring (wil_netdev_ops.ndo_stop -> wil_stop -> wil_down -> __wil_down -> wil_rx_fini), Rx interrupt occurs. It trigger Rx NAPI, calling wil_rx_handle() that reaps (already cleaned) buffer, causing skb referring to garbage memory being set into reorder buffer. Then, network stack trying to access this buffer and fails. Prevent Rx NAPI from being scheduled if device going to stop. Bit wil_status_napi_en reflects NAPI enablement state, check it when triggering Rx NAPI. Testing shows that check for wil_status_napi_en sometimes gets negative, and new error message get printed - in this case kernel oops would be observed. Original oops is no more reproducible. This change requires also changes in the AP flows. Properly enable/disable NAPI for the AP. Make sure Rx VRING is disabled when resetting target. For this, promote __wil_up() and __wil_down() to the module scope, and use it in the relevant flows. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: rename [en|dis]able irq to [un]maskVladimir Kondratiev3-7/+7
To better reflect real action performed, rename: s/wil6210_disable_irq/wil_mask_irq/ s/wil6210_enable_irq/wil_unmask_irq/ Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: fix typo in commentVladimir Kondratiev1-1/+2
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: specify max. IE lengthVladimir Kondratiev1-0/+15
Expose firmware limit for the max_scan_ie_len; also do actually set IE's for the probe request max_scan_ie_len used to be 0, this blocks scan requests with non-zero IE's Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: introduce separate completion for WMIDedy Lansky3-4/+7
re-use of wmi_ready for both FW ready event and for wmi_call was causing false "FW not ready" indication in case wmi_call() was invoked while reset took place. add wmi_call completion variable instead of re-using wmi_ready. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: enlarge TX/RX buffer lengthVladimir Kondratiev3-5/+9
HW supports upto 2304 packet size on the air. HW is responsible for adding (Tx) or removing (Rx) the following headers: 802.11 hdr: 26B SNAP: 8B CRC: 4B Security (optional): 24B HW adds max 62B to the payload passed from driver. It means driver can use max packet size of 2304-62 = 2242B Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: add change_beacon() driver callbackVladimir Kondratiev1-0/+40
This allows updating IEs (e.g. from hostapd) when AP is already started Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: send connect request IEs to FW also for non-secure connectionVladimir Kondratiev2-11/+13
Driver is sending connect request IEs to FW only for secure connection and ignores them for non-secure connection. This is fixed by always sending the IEs to FW upon connect request Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: fix race condition between BACK event and Rx dataDedy Lansky5-13/+32
While handling Rx packet, BACK event arrives and frees tid_ampdu_rx array. This causes kernel panic while accessing already freed spinlock The fix is to remove tid_ampdu_rx[]'s spinlock and instead use single sta's spinlock to guard the whole tid_ampdu_rx array. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: modify confusing printoutDedy Lansky1-1/+1
When WMI event received when driver not ready to accept it, the printed error message is misleading and hints that HW is stuck. Modify the error message to make it clearer Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: fix race condition of disconnect while BACK eventDedy Lansky1-2/+7
This race condition was causing double free of tid_ampdu_rx structures Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: fix usage of print_hex_dump_debugVladimir Kondratiev1-0/+7
When CONFIG_DYNAMIC_DEBUG is not defined, print_hex_dump_debug is mapped directly to print_hex_dump which might cause printout to exist all the time Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: fix for memory corruption upon rmmodDedy Lansky2-2/+26
Driver disabled PCI master before making sure HW is idle. This caused memory corruption in case HW access system memory after PCI master got disabled. The fix is to change uninit sequence. Make sure FW/HW is idle before disabling PCI Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: fix for memory corruption while insmodDedy Lansky1-6/+1
After setting interrupt handler, driver enabled interrupts. This caused stale (old) HW interrupts to fire before driver is fully initialized. The fix is to enable interrupts only when driver is fully initialized and after FW/HW reset (to prevent any stale interrupts) Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: add more debug printoutsVladimir Kondratiev6-2/+49
added misc printouts in some init/uninit functions for better traceability Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 23:48:54 +0300