summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)AuthorFilesLines
2014-08-28ath9k: Fix 'offchannel' in ath_softcSujith Manoharan2-1/+3
Finally move the 'offchannel' instance in ath_softc inside a CONFIG_ATH9K_CHANNEL_CONTEXT cage. The offchannel usage in ath9k_calculate_iter_data() is closed off with an ifdef for now, since the state/opmode calculation is common for both the channel context mode and the normal mode. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Fix function argument typeSujith Manoharan1-2/+2
ath9k_vif_iter() was earlier used as an iterator routine when calling a mac80211 utility. This is no longer the case and hence we can mention the argument type explicitly. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Use ath_chanctx_check_active properlySujith Manoharan2-47/+50
ath_chanctx_check_active() is required only when channel contexts are used. Make sure that it is not called in normal usage. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add ath9k_offchannel_initSujith Manoharan3-8/+30
This patch adds a routine to setup the offchannel instance in ath_softc. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add ath9k_chanctx_wake_queuesSujith Manoharan3-13/+32
Introduce a function that handles queues in channel context mode. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add wrappers for beacon eventsSujith Manoharan4-9/+32
Using these wrappers allows us to move the 'sched' variable in ath_softc inside CONFIG_ATH9K_CHANNEL_CONTEXT. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Fix function declarationsSujith Manoharan1-3/+3
These routines are required only when CONFIG_ATH9K_CHANNEL_CONTEXT is enabled. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Fix channel context eventsSujith Manoharan6-33/+57
Check if channel context usage is enabled before calling ath_chanctx_event() from various parts of the driver. Also, make sure that ath_chanctx_event() is compiled only when CONFIG_ATH9K_CHANNEL_CONTEXT is enabled. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Make ath_chanctx_switch staticSujith Manoharan2-39/+37
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Make ath_chanctx_get_oper_chan staticSujith Manoharan2-19/+18
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Make ath_chanctx_offchan_switch staticSujith Manoharan2-15/+13
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Conditionally compile more functionsSujith Manoharan1-19/+19
Use CONFIG_ATH9K_CHANNEL_CONTEXT to exclude: ath_scan_complete() ath_roc_complete() ath_offchannel_next() ath_scan_next_channel() ath_scan_channel_duration() Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Exclude more functionsSujith Manoharan2-61/+60
Use CONFIG_ATH9K_CHANNEL_CONTEXT to exclude more functions: ath_offchannel_channel_change() ath_scan_channel_start() ath_scan_send_probe() Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Conditionally compile a few functionsSujith Manoharan1-146/+146
Exclude these functions when CONFIG_ATH9K_CHANNEL_CONTEXT is not enabled: ath_chanctx_send_vif_ps_frame() ath_chanctx_send_ps_frame() ath_chanctx_defer_switch() ath_chanctx_set_next() Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Cleanup mgd_prepare_tx callbackSujith Manoharan3-34/+34
Rename the callback from ath9k_chanctx_force_active() to ath9k_mgd_prepare_tx(). Also, move it to main.c and group it with the other callbacks. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Make ath_chanctx_work staticSujith Manoharan2-10/+9
Also compile it conditionally based on CONFIG_ATH9K_CHANNEL_CONTEXT. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add a routine to tear down channel contextsSujith Manoharan4-2/+13
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add a routine for initializing channel contextsSujith Manoharan3-15/+25
Setup the offchannel/sched timers and the chanctx work inside the new function. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28carl9170: Remove redundant protection checkAndreea-Cristina Bernat1-10/+1
The carl9170_op_ampdu_action() function is used only by the mac80211 framework. Since the mac80211 already takes care of checks and properly serializing calls to the driver's function there is no need for the driver to do the same thing. Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Isolate ath9k_use_chanctx module parameterSujith Manoharan5-32/+62
This patch ensures that the module parameter "use_chanctx" is visible only when CONFIG_ATH9K_CHANNEL_CONTEXT is selected. Also register the channel context callbacks with mac80211 only when it is explicitly enabled and compile them out of the driver when CONFIG_ATH9K_CHANNEL_CONTEXT is not selected. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Isolate P2P powersave routinesSujith Manoharan5-36/+111
Use CONFIG_ATH9K_CHANNEL_CONTEXT to conditionally compile P2P-PS code. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Move P2P functions to channel.cSujith Manoharan3-87/+87
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add a config option for channel contextSujith Manoharan1-0/+9
Channel contexts are supported only for P2P right now, so make sure that the 'normal' path remains unaffected by using a config option. This will also reduce the size of the driver. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add debug informationSujith Manoharan2-12/+122
Add a few statements to debug channel context operation. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Move channel operations to channel.cSujith Manoharan3-202/+205
This reduces clutter in main.c Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Handle failure to allocate HW timerSujith Manoharan1-1/+3
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add a debug level for channel contextSujith Manoharan2-0/+3
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath5k: remove redundant null check before kfree()Bob Copeland1-2/+1
kfree() null-checks its argument. Found by smatch. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath5k: ensure led name is null terminatedBob Copeland1-0/+1
Add the missing null termination after strncpy(). This isn't actually a buffer overflow in this case since we use snprintf() appropriately to fill the buffer passed by the caller, but in the interest of not turning this into a bug down the road, go ahead and force termination here. Found by Coverity. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath5k: drop useless comparisonBob Copeland1-1/+1
rxs->rate_idx is unsigned, so it will always be >= 0. Found by Coverity. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k_htc: advertise support for TDLSCsaba Kiraly1-0/+2
Based on a quick test with AR9271, TDLS seems to be working fine. Tests were done with 2 Atheros AR9271 based devices with firmware 1.3 (sha1 8d49f928aa40ac53c729189bff1333cd373a7fb5), associated with a WAP54G access point. TDLS worked fine both in WPA2 mode and without encryption. Stations maintained ping flood traffic between each other and towards the AP without significant losses. Not tested with AR7010. TDLS was enabled in earlier patches the same way for other Atheros drivers: ath9k (fd6562344dea2b8b2a5d644cf971f4e56004500a), and carl9170 (d1f3de71a584a82ee4e84505fce9acccf40215ff). Signed-off-by: Csaba Kiraly <csaba.kiraly@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28Merge branch 'for-linville' of git://github.com/kvalo/athJohn W. Linville30-2199/+4128
2014-08-27ath10k: make target endianess more explicitMichal Kazior2-137/+140
Some copy engine structures are target specific and are uploaded to the device during init/configuration. This also cleans up a bit diag_mem_read/write implicit byteswap mess leaving only diag_access_read/write with an implicit endianess byteswap. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-08-27ath10k: dont duplicate service-pipe mappingMichal Kazior1-44/+33
The mapping is already defined in a structure. It makes little sense to duplicate information stored in it within a function. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-08-27ath10k: move pci init structuresMichal Kazior1-96/+96
It doesn't make much sense to have copy engine configuration structures spread across the whole source file. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-08-26ath10k: fix fw crash dumpingMichal Kazior1-5/+3
Recent crash dump patches introduced a regression. If debugfs was disabled upon crash user could only see the following: [ 793.880000] ath10k: firmware crashed! (uuid n/a) [ 793.890000] ath10k: qca988x hw2.0 (0x4100016c, 0x043202ff) fw 10.1.467.2-1 api 2 htt 2.1 [ 793.890000] ath10k: debug 0 debugfs 0 tracing 0 dfs 1 The report was missing register dump. Fix it by printing registers regardless if crash_data is present or not. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-08-26ath10k: improve logging to include dev idMichal Kazior15-781/+833
This makes it a lot easier to log and debug messages if there's more than 1 ath10k device on a system. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-08-26cfg80211: allow passing frame type to cfg80211_inform_bss()Johannes Berg3-35/+11
When using the cfg80211_inform_bss[_width]() functions drivers cannot currently indicate whether the data was received in a beacon or probe response. Fix that by passing a new enum that indicates such (or unknown). For good measure, use it in ath6kl. Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> [ath6kl] Acked-by: Arend van Spriel <arend@broadcom.com> [brcmfmac] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-26cfg80211: remove @gfp parameter from cfg80211_rx_mgmt()Vladimir Kondratiev2-4/+3
In the cfg80211_rx_mgmt(), parameter @gfp was used for the memory allocation. But, memory get allocated under spin_lock_bh(), this implies atomic context. So, one can't use GFP_KERNEL, only variants with no __GFP_WAIT. Actually, in all occurrences GFP_ATOMIC is used (wil6210 use GFP_KERNEL by mistake), and it should be this way or warning triggered in the memory allocation code. Remove @gfp parameter as no actual choice exist, and use hard coded GFP_ATOMIC for memory allocation. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-26wil6210: fix access after free in wil_pcie_remove()Vladimir Kondratiev1-1/+2
'wil' released in wil_if_free(); save iomapped address aside to properly unmap it. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-26wil6210: cfg80211_rx_mgmt to use GFP_ATOMICVladimir Kondratiev1-1/+1
Internally, cfg80211_rx_mgmt() takes lock: spin_lock_bh(&wdev->mgmt_registrations_lock); and therefore one can't use it with GFP_KERNEL allocation flags. When called with GFP_KERNEL, "sleep while atomic" warning triggered: <3>[242645.446224] BUG: sleeping function called from invalid context at kernel/mm/slub.c:926 <3>[242645.455516] in_atomic(): 1, irqs_disabled(): 0, pid: 18881, name: kworker/u16:0 <6>[242645.462868] CPU: 0 PID: 18881 Comm: kworker/u16:0 Tainted: G O 3.10.40-g619a884-00001-g357fa9c #2 <6>[242645.463044] Workqueue: wil6210_wmi wmi_event_worker [wil6210] <6>[242645.463087] Call trace: <6>[242645.463157] [<ffffffc000087390>] dump_backtrace+0x0/0x144 <6>[242645.463205] [<ffffffc0000874e4>] show_stack+0x10/0x1c <6>[242645.463259] [<ffffffc0009abc04>] dump_stack+0x1c/0x28 <6>[242645.463313] [<ffffffc0000c10c0>] __might_sleep+0xe0/0xf0 <6>[242645.463365] [<ffffffc00015a514>] kmem_cache_alloc+0x48/0x1e4 <6>[242645.463414] [<ffffffc00080d468>] __alloc_skb+0x48/0x164 <6>[242645.463466] [<ffffffc00097f2c4>] nl80211_send_mgmt+0x4c/0x1dc <6>[242645.463511] [<ffffffc000980268>] cfg80211_rx_mgmt+0x1bc/0x25c <6>[242645.463647] [<ffffffbffc005d64>] wmi_evt_rx_mgmt+0x21c/0x23c [wil6210] <6>[242645.463783] [<ffffffbffc0073b8>] wmi_event_worker+0x230/0x2f8 [wil6210] <6>[242645.463838] [<ffffffc0000afffc>] process_one_work+0x258/0x3d0 <6>[242645.463887] [<ffffffc0000b0fe0>] worker_thread+0x1f0/0x310 <6>[242645.463946] [<ffffffc0000b642c>] kthread+0xac/0xb8 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-26wil6210: fix free'd memory access in wil_if_free()Vladimir Kondratiev1-1/+5
In the wil_priv_deinit(), wdev->netdev is accessed, so free_netdev() should not be called before mentioned call. Set wdev->netdev to NULL Make sure no more attempts to use it. It is used for debug printk if not NULL. This fix kernel panic on module unload and in case error on probe; if memory allocation debugging enabled. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-26wil6210: Limit max number of associated stationsDedy Lansky1-1/+14
Add a module parameter to support setting the maximum number of stations that can be associated to an AP. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-26wil6210: fix false "scan timeout"Vladimir Kondratiev1-1/+3
When sending scan request, if hardware is not ready, scan timer was started and scan timeout mis-reported. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-26wil6210: fix beamforming data reportingVladimir Kondratiev5-49/+72
When reading 'bf' file on debugfs, query beam forming status from firmware. Ignore CID's that return error or return all zeros. Remove obsolete code that used to maintain statistics on per-device basis, as now it is reported be per-CID and current. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-26wil6210: convert debugfs to the table modeVladimir Kondratiev1-74/+180
Define tables for similar file entries, i.e. - table for debugfs_create_file - table for static parameters - table for parameters that are members of "wil" structure - table for blobs - table for interrupt controllers Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-26wil6210: Workaround for Sparrow with bad device idVladimir Kondratiev1-0/+2
If firmware broken on the boot time, Sparrow card enumerates as device 0x302 instead of 0x310. Allow using this ID Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-26wil6210: wait longer for hardware reset completionVladimir Kondratiev1-4/+7
Typical time for hardware reset, as measured, is about 200..250 msec. Adjust sleeping to use more relaxed msleep, increase sleep interval and increase total sleep time to be about 1sec Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-26wil6210: check error in wil_target_reset()Vladimir Kondratiev1-5/+7
When resetting target in wil_target_reset(), error may occur. Indicate error via error code. In case of error, don't attempt to further interact with card, specifically don't attempt firmware download or interrupts enabling. Move wil_rx_fini() to be always executed to prevent memory leak. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-26wil6210: update copyright year 2014Vladimir Kondratiev12-11/+27
Fix Copyright headers in all files changed in 2014, to mention 2014 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 08:22:20 +0300