| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
|
|
Don't deinitialize and reinitialize the HAL helpers. The dma memory is
deallocated and there is high possibility that we'll not be able to get
the same memory allocated from dma when there is high memory pressure.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.6
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org
Cc: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://patch.msgid.link/20250722053121.1145001-1-usama.anjum@collabora.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, the QMI interface only works on little endian systems due to how
it encodes and decodes data. Most QMI related data structures do not use
endian specific types and are already defined in CPU native order. The
ath12k specific QMI structs are an exception: they use partially endian
specific types, which prevents the QMI interface from being extended to
support big endian systems.
Update the two affected ath12k QMI structs to use CPU order types instead.
This is required because the QMI interface is being extended to support big
endian system, and that support depends on QMI data structures being
defined in CPU native order.
This change:
* preserves compatibility with existing kernels, which only support little
endian system
* enables future support for big endian systems
* aligns ath12k QMI handling with the general QMI design
Signed-off-by: Alexander Wilhelm <alexander.wilhelm@westermo.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250922061607.11543-1-alexander.wilhelm@westermo.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, if the descriptor size exceeds 128 bytes, the total
descriptor is split into multiple 128-byte segments, each
requiring a separate flush cache queue command. This results in
multiple commands being issued to flush a single TID, which
negatively impacts performance. To optimize this, use the
_FLUSH_QUEUE_1K_DESC REO command to flush a 1KB descriptor in a single
operation to optimize performance.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Manish Dharanenthiran <manish.dharanenthiran@oss.qualcomm.com>
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250806111750.3214584-8-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Flush cache failures were observed after RX queue update for TID
delete. This occurred because the queue was invalid during flush.
Set the VLD bit in the RX queue update command for TID delete.
This ensures the queue remains valid during the flush cache process.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250806111750.3214584-7-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
During stress test scenarios, when the REO command ring becomes full,
the RX queue update command issued during peer deletion fails due to
insufficient space. In response, the host performs a dma_unmap and
frees the associated memory. However, the hardware still retains a
reference to the same memory address. If the kernel later reallocates
this address, unaware that the hardware is still using it, it can
lead to memory corruption-since the host might access or modify
memory that is still actively referenced by the hardware.
Implement a retry mechanism for the HAL_REO_CMD_UPDATE_RX_QUEUE
command during TID deletion to prevent memory corruption. Introduce
a new list, reo_cmd_update_rx_queue_list, in the struct ath12k_dp to
track pending RX queue updates. Protect this list with
reo_rxq_flush_lock, which also ensures synchronized access to
reo_cmd_cache_flush_list. Defer memory release until hardware
confirms the virtual address is no longer in use, avoiding immediate
deallocation on command failure. Release memory for pending RX queue
updates via ath12k_dp_rx_reo_cmd_list_cleanup() on system reset
if hardware confirmation is not received.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Manish Dharanenthiran <manish.dharanenthiran@oss.qualcomm.com>
Co-developed-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250806111750.3214584-6-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Introduce ath12k_dp_rx_tid_rxq as a lightweight structure to represent
only the necessary fields for REO command construction. Replace direct
usage of ath12k_dp_rx_tid in REO command paths with this new structure.
This decouples REO command logic from internal TID state representation,
improves modularity, and reduces unnecessary data dependencies.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250806111750.3214584-5-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Introduce ath12k_dp_rx_tid_cleanup() to handle RX TID buffer
unmapping and freeing. This replaces duplicated cleanup logic
across multiple code paths.
This improves code maintainability and avoids redundancy in
buffer cleanup operations.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250806111750.3214584-4-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Refactor RX TID deletion handling by moving the REO command
setup and send sequence into a new helper function:
ath12k_dp_rx_tid_delete_handler().
This improves code readability and modularity, and prepares
the codebase for potential reuse of the REO command logic in
other contexts where RX TID deletion is required.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250806111750.3214584-3-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Increase DP_REO_CMD_RING_SIZE from 128 to 256 to avoid
queuing failures observed during stress test scenarios.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250806111750.3214584-2-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In ath12k_dp_mon_rx_deliver_msdu(), peer lookup fails because
rxcb->peer_id is not updated with a valid value. This is expected
in monitor mode, where RX frames bypass the regular RX
descriptor path that typically sets rxcb->peer_id.
As a result, the peer is NULL, and link_id and link_valid fields
in the RX status are not populated. This leads to a WARN_ON in
mac80211 when it receives data frame from an associated station
with invalid link_id.
Fix this potential issue by using ppduinfo->peer_id, which holds
the correct peer id for the received frame. This ensures that the
peer is correctly found and the associated link metadata is updated
accordingly.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: bd00cc7e8a4c ("wifi: ath12k: replace the usage of rx desc with rx_info")
Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Signed-off-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250724040552.1170642-1-aishwarya.r@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, ath12k_mac_handle_beacon_miss() does not handle the beacon
miss for the MLO case.
In MLO scenarios, the host fails to process the beacon miss because the
vdev_id comparison in ath12k_mac_handle_beacon_miss_iter() does not match.
This mismatch occurs since arvif always points to ahvif->deflink, which may
not correspond to the actual vdev_id associated with the event.
Fix this by retrieving arvif from vdev_id instead of ahvif->deflink which
will work for both MLO and Non-MLO case.
Also refactor the ath12k_mac_handle_beacon_miss(), by passing arvif
directly instead of vdev_id and remove ath12k_mac_handle_beacon_miss_iter()
which is no longer needed.
ath12k_mac_handle_beacon_miss() is called from ath12k_roam_event() for WCN
chipsets and ath12k_peer_sta_kickout_event() for QCN chipsets.
So, refactor the ath12k_roam_event() to pass arvif instead vdev_id to the
ath12k_mac_handle_beacon_miss() function to align with the
ath12k_peer_sta_kickout_event() and change the rcu_read_lock() to
guard(rcu)() in the same function ath12k_roam_event().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Co-developed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250812111708.3686-4-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
QCN9274/IPQ5332
Currently, when the non-AP STA connected to the AP STA, and the AP STA goes
down or becomes inactive without indication, firmware detects the beacon
miss and sends the WMI event WMI_PEER_STA_KICKOUT_EVENTID with reason as
INACTIVITY. The host driver handles this event as low ACK and reports it to
the mac80211 driver.
However, the expectation is that non-AP STA should be disconnected from
AP STA instantly once it receives the STA kickout event with reason of
inactivity.
Trigger a disconnect from AP STA through beacon miss handling upon
receiving non-AP STA peer kickout event with reason code inactivity.
Replace the helper function ath12k_mac_get_ar_by_vdev_id() with
ath12k_mac_get_arvif_by_vdev_id() due to the following reasons.
1. Check the station VIF type for handling the beacon miss.
2. Retrieve the proper ar from the arvif by checking the vdev_id with
vdev_map and link_map lookup which is needed for the MLO case in the
following patch.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Co-developed-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
Signed-off-by: Arulanbu Balusamy <quic_abalusam@quicinc.com>
Co-developed-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250812111708.3686-3-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
reporting
Enhance the WMI_PEER_STA_KICKOUT event by adding support for reporting the
kickout reason and RSSI value. The reason code will be used in the
following patches when the beacon miss handling is added.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250812111708.3686-2-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, command “iw wlan0 station dump” does not show per-chain signal
strength.
This is because ath12k does not handle the num_per_chain_rssi and
rssi_avg_beacon reported by firmware to ath12k.
To address this, update ath12k to send WMI_REQUEST_STATS_CMDID with the
flag WMI_REQUEST_RSSI_PER_CHAIN_STAT to the firmware. Then, add logic to
handle num_per_chain_rssi and rssi_avg_beacon in the
ath12k_wmi_tlv_fw_stats_parse(), and assign the resulting per-chain signal
strength to the chain_signal of struct station_info.
After that, "iw dev xxx station dump" shows the correct per-chain signal
strength.
Such as:
Station AA:BB:CC:DD:EE:FF (on wlan0)
inactive time: 212 ms
rx bytes: 10398
rx packets: 64
tx bytes: 4362
tx packets: 33
tx retries: 49
tx failed: 0
beacon loss: 0
beacon rx: 14
rx drop misc: 16
signal: -45 [-51, -46] dBm
beacon signal avg: -44 dBm
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219751
Signed-off-by: Lingbo Kong <lingbo.kong@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250812030044.688-1-quic_lingbok@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
It appears that not all hardware/firmware implementations support
group key deletion correctly, which can lead to connection hangs
and deauthentication following GTK rekeying (delete and install).
To avoid this issue, instead of attempting to delete the key using
the special WMI_CIPHER_NONE value, we now replace the key with an
invalid (random) value.
This behavior has been observed with WCN39xx chipsets.
Tested-on: WCN3990 hw1.0 WLAN.HL.3.3.7.c2-00931-QCAHLSWMTPLZ-1
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Closes: https://lore.kernel.org/all/DAWJQ2NIKY28.1XOG35E4A682G@linaro.org
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # QRB2210 RB1
Link: https://patch.msgid.link/20250902143225.837487-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Commit e57b7d62a1b2 ("wifi: ath10k: poll service ready message before
failing") works around the failure in waiting for the service ready
message by active polling. Note the polling is triggered after initial
wait timeout, which means that the wait-till-timeout can not be avoided
even the message is ready.
A possible fix is to do polling once before wait as well, however this
can not handle the race that the message arrives right after polling.
So the solution is to do periodic polling until timeout.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00309-QCARMSWPZ-1
Fixes: e57b7d62a1b2 ("wifi: ath10k: poll service ready message before failing")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/all/97a15967-5518-4731-a8ff-d43ff7f437b0@molgen.mpg.de
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250811-ath10k-avoid-unnecessary-wait-v1-1-db2deb87c39b@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
If ab->fw.m3_data points to data, then fw pointer remains null.
Further, if m3_mem is not allocated, then fw is dereferenced to be
passed to ath11k_err function.
Replace fw->size by m3_len.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 7db88b962f06 ("wifi: ath11k: add firmware-2.bin support")
Cc: stable@vger.kernel.org
Signed-off-by: Matvey Kovalev <matvey.kovalev@ispras.ru>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250917192020.1340-1-matvey.kovalev@ispras.ru
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
The error handling is a bit different for ath10k. "memory-region" is
optional, so failed lookup is not an error. But then an error in
of_address_to_resource() is treated as an error. However, that
distinction is not really important. Either the region is available
and usable or it is not. So now, it is just
of_reserved_mem_region_to_resource() which is checked for an error.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250813214933.897486-1-robh@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The leds-gpio traditionally takes a global gpio number in its platform
data, but the number assigned here is not actually such a number but
only meant to be used internally to this driver.
As part of the kernel-wide cleanup of the old gpiolib interfaces, the
'gpio' number field is going away, so to keep ath10k building, move
the assignment into a private structure instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250808151822.536879-17-arnd@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Remove unnecessary semicolon.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://patch.msgid.link/20250812075259.6921-1-liaoyuanhong@vivo.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
There are two rings involved in the Copy Engine (CE) receive path
handling, the CE status (STS) ring and the CE destination (DST) ring.
Each time CE hardware needs to send an event (e.g. WMI event) to host,
CE hardware finds a buffer (to which the tail pointer (TP) points) in
DST ring and fills it with payload, then hardware fills meta data in
STS ring and fires interrupt to host. Please note the TP of DST ring is
expected to be advanced by CE hardware before interrupting host. While
handling the interrupt, host finds that DST ring buffers are used hence
increases rx_buf_needed to record the number of buffers to be replenished.
Note before that, host compares TP and head pointer (HP) of DST ring to
see if there is available space. Normally rx_buf_needed simply equals
available space. But sometimes CE hardware doesn't (for whatever reason)
update TP timely, making the comparison fails, then enqueue is cancelled
and a warning is logged.
However even enqueue fails this time, rx_buf_needed still records the
numbers of needed buffers. Later when TP gets updated correctly, the
missing buffer will be eventually replenished. And there is no doubt on
the late update, it always comes (or lots of such warnings should be seen).
Since this won't cause any functional issue, downgrade logging level to
avoid misleading.
Compile tested only.
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250815-ath-dont-warn-on-ce-enqueue-fail-v1-3-f955ddc3ba7a@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
ATH12K_DBG_AHB is used for CE logging which is not proper. Add
ATH12K_DBG_CE and replace ATH12K_DBG_AHB with it.
Compile tested only.
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250815-ath-dont-warn-on-ce-enqueue-fail-v1-2-f955ddc3ba7a@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
There are two rings involved in the Copy Engine (CE) receive path
handling, the CE status (STS) ring and the CE destination (DST) ring.
Each time CE hardware needs to send an event (e.g. WMI event) to host,
CE hardware finds a buffer (to which the tail pointer (TP) points) in
DST ring and fills it with payload, then hardware fills meta data in
STS ring and fires interrupt to host. Please note the TP of DST ring is
expected to be advanced by CE hardware before interrupting host. While
handling the interrupt, host finds that DST ring buffers are used hence
increases rx_buf_needed to record the number of buffers to be replenished.
Note before that, host compares TP and head pointer (HP) of DST ring to
see if there is available space. Normally rx_buf_needed simply equals
available space. But sometimes CE hardware doesn't (for whatever reason)
update TP timely, making the comparison fails, then enqueue is cancelled
and a warning is logged:
ath11k_pci 0000:02:00.0: failed to enqueue rx buf: -28
However even enqueue fails this time, rx_buf_needed still records the
numbers of needed buffers. Later when TP gets updated correctly, the
missing buffer will be eventually replenished. And there is no doubt on
the late update, it always comes (or lots of such warnings should be seen).
Since this won't cause any functional issue, downgrade logging level to
avoid misleading.
Compile tested only.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220269
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250815-ath-dont-warn-on-ce-enqueue-fail-v1-1-f955ddc3ba7a@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, ath12k_dp_rx_h_ppdu() determines the band and frequency
based on the channel number and center frequency from the RX descriptor's
PHY metadata. However, in rare cases, it is observed that frequency
retrieved from the metadata may be invalid or unexpected especially for
6 GHz frames.
This can result in a NULL sband, which prevents proper frequency assignment
in rx_status and potentially leading to incorrect RX packet classification.
To fix this potential issue, add a fallback mechanism that uses
ar->rx_channel to populate the band and frequency when the derived
sband is invalid or missing.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Vinith Kumar R <quic_vinithku@quicinc.com>
Signed-off-by: Vinith Kumar R <quic_vinithku@quicinc.com>
Signed-off-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250723190651.699828-1-aishwarya.r@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, host fetches combined rssi from rssi_comb in struct
hal_rx_phyrx_rssi_legacy_info.
rssi_comb is 8th to 15th bits of the second to last variable.
rssi_comb_ppdu is the 0th to 7th of the last variable.
When bandwidth = 20MHz, rssi_comb = rssi_comb_ppdu. But when bandwidth >
20MHz, rssi_comb < rssi_comb_ppdu because rssi_comb only includes power
of primary 20 MHz while rssi_comb_ppdu includes power of active
RUs/subchannels. So should fetch combined rssi from rssi_comb_ppdu.
Also related macro definitions are too long, rename them.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250722095934.67-4-kang.yang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Current monitor mode will parse TLV HAL_PHYRX_OTHER_RECEIVE_INFO with
struct hal_phyrx_common_user_info.
Obviously, they do not match. The original intention here was to parse
HAL_PHYRX_COMMON_USER_INFO. So fix it by correctly parsing
HAL_PHYRX_COMMON_USER_INFO instead.
Also add LTF parsing and report to radiotap along with GI.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: d939919a36f4 ("wifi: ath12k: Add HAL_PHYRX_OTHER_RECEIVE_INFO TLV parsing support")
Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250722095934.67-3-kang.yang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently host will add ATH12K_DEFAULT_NOISE_FLOOR to rssi_comb to
convert RSSI from dB to dBm.
For WCN7850, this conversion is unnecessary because the RSSI value is
already reported in dBm units.
No longer convert for those firmware that already support dBM conversion.
This patch won't affect QCN chips.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250722095934.67-2-kang.yang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In ath12k_mac_parse_tx_pwr_env(), for the non-PSD case num_pwr_levels is
limited by ATH12K_NUM_PWR_LEVELS which is 16:
if (tpc_info->num_pwr_levels > ATH12K_NUM_PWR_LEVELS)
tpc_info->num_pwr_levels = ATH12K_NUM_PWR_LEVELS;
Then it is used to iterate entries in local_non_psd->power[] and
reg_non_psd->power[]:
for (i = 0; i < tpc_info->num_pwr_levels; i++) {
tpc_info->tpe[i] = min(local_non_psd->power[i],
reg_non_psd->power[i]) / 2;
Since the two array are of size 5, Smatch warns:
drivers/net/wireless/ath/ath12k/mac.c:9812
ath12k_mac_parse_tx_pwr_env() error: buffer overflow 'local_non_psd->power' 5 <= 15
drivers/net/wireless/ath/ath12k/mac.c:9812
ath12k_mac_parse_tx_pwr_env() error: buffer overflow 'reg_non_psd->power' 5 <= 15
This is a false positive as there is already implicit limitation:
tpc_info->num_pwr_levels = max(local_non_psd->count,
reg_non_psd->count);
meaning it won't exceed 5.
However, to make robot happy, add explicit limit there.
Also add the same to the PSD case, although no warning due to
ATH12K_NUM_PWR_LEVELS equals IEEE80211_TPE_PSD_ENTRIES_320MHZ.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Fixes: cccbb9d0dd6a ("wifi: ath12k: add parse of transmit power envelope element")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202505180703.Kr9OfQRP-lkp@intel.com/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250804-ath12k-fix-smatch-warning-on-6g-vlp-v1-2-56f1e54152ab@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, at the end of ath12k_mac_fill_reg_tpc_info(), the
reg_tpc_info struct is populated, including the following:
reg_tpc_info->is_psd_power = is_psd_power;
reg_tpc_info->eirp_power = eirp_power;
Kernel test robot complains on uninitialized symbol:
drivers/net/wireless/ath/ath12k/mac.c:10069
ath12k_mac_fill_reg_tpc_info() error: uninitialized symbol 'eirp_power'
This is because there are some code paths that never set eirp_power, so
the assignment of reg_tpc_info->eirp_power can come from an
uninitialized variable. Functionally this is OK since the eirp_power
only has meaning when is_psd_power is true, and all code paths which set
is_psd_power to true also set eirp_power. However, to keep the robot
happy, always initialize eirp_power before use.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Fixes: aeda163bb0c7 ("wifi: ath12k: fill parameters for vdev set TPC power WMI command")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202505180927.tbNWr3vE-lkp@intel.com/
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250804-ath12k-fix-smatch-warning-on-6g-vlp-v1-1-56f1e54152ab@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, command to set RTS threshold makes changes to the threshold of
all radios in the multi-radio wiphy. But each radio in a multi-radio wiphy
can have different RTS threshold requirements.
To support this requirement, use the index of radio for which the RTS
threshold needs to be changed from mac80211 - radio_idx. Based on the value
passed, set the RTS threshold value for the corresponding radios. Following
are the possible values of radio_idx and the corresponding behavior in
multi-radio wiphys:
1. radio_idx is -1: consider RTS threshold as a global parameter, i.e.,
make changes to all the radios in a wiphy. If setting RTS threshold
fails for any radio, then the previous RTS threshold values of
respective radios will be restored.
2. radio_idx denotes a specific radio: make changes in RTS threshold to
that radio alone.
3. radio_idx is any other number: report it as an invalid number.
In case of single-radio wiphys, continue with the existing behavior, i.e.,
set the passed RTS threshold value to the radio present.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250826105714.1188131-1-quic_rdevanat@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Plenty of things going on, notably:
- iwlwifi: major cleanups/rework
- brcmfmac: gets AP isolation support
- mac80211: gets more S1G support
* tag 'wireless-next-2025-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (94 commits)
wifi: mwifiex: fix endianness handling in mwifiex_send_rgpower_table
wifi: cfg80211: Remove the redundant wiphy_dev
wifi: mac80211: fix incorrect comment
wifi: cfg80211: update the time stamps in hidden ssid
wifi: mac80211: Fix HE capabilities element check
wifi: mac80211: add tx_handlers_drop statistics to ethtool
wifi: mac80211: fix reporting of all valid links in sta_set_sinfo()
wifi: iwlwifi: mld: CHANNEL_SURVEY_NOTIF is always supported
wifi: iwlwifi: mld: remove support of iwl_esr_mode_notif version 1
wifi: iwlwifi: mld: remove support from of sta cmd version 1
wifi: iwlwifi: mld: remove support of roc cmd version 5
wifi: iwlwifi: mld: remove support of mac cmd ver 2
wifi: iwlwifi: mld: don't consider phy cmd version 5
wifi: iwlwifi: implement wowlan status notification API update
wifi: iwlwifi: fw: Add ASUS to PPAG and TAS list
wifi: iwlwifi: add kunit tests for nvm parse
wifi: iwlwifi: api: add a flag to iwl_link_ctx_modify_flags
wifi: iwlwifi: pcie: move ltr_enabled to the specific transport
wifi: iwlwifi: pcie: move pm_support to the specific transport
wifi: iwlwifi: rename iwl_finish_nic_init
...
====================
Link: https://patch.msgid.link/20250911100854.20445-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When buf_len is not 4-byte aligned in ath12k_wmi_mgmt_send(), the
firmware asserts and triggers a recovery. The following error
messages are observed:
ath12k_pci 0004:01:00.0: failed to submit WMI_MGMT_TX_SEND_CMDID cmd
ath12k_pci 0004:01:00.0: failed to send mgmt frame: -108
ath12k_pci 0004:01:00.0: failed to tx mgmt frame, vdev_id 0 :-108
ath12k_pci 0004:01:00.0: waiting recovery start...
This issue was observed when running 'iw wlanx set power_save off/on'
in MLO station mode, which triggers the sending of an SMPS action frame
with a length of 27 bytes to the AP. To resolve the misalignment, use
buf_len_aligned instead of buf_len when constructing the WMI TLV header.
Tested-on: WCN7850 hw2.0 PCI WLAN.IOE_HMT.1.1-00011-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250908015139.1301437-1-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Commit afbab6e4e88d ("wifi: ath12k: modify ath12k_mac_op_bss_info_changed()
for MLO") replaced the bss_info_changed() callback with vif_cfg_changed()
and link_info_changed() to support Multi-Link Operation (MLO). As a result,
the station power save configuration is no longer correctly applied in
ath12k_mac_bss_info_changed().
Move the handling of 'BSS_CHANGED_PS' into ath12k_mac_op_vif_cfg_changed()
to align with the updated callback structure introduced for MLO, ensuring
proper power-save behavior for station interfaces.
Tested-on: WCN7850 hw2.0 PCI WLAN.IOE_HMT.1.1-00011-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Fixes: afbab6e4e88d ("wifi: ath12k: modify ath12k_mac_op_bss_info_changed() for MLO")
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250908015025.1301398-1-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The command NL80211_CMD_SET_BSS has a number of individual attributes
and the driver can advertise which of those it will handle when it is
changed by user-space. For drivers providing an empty .change_bss()
the callback has been removed.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250817190435.1495094-3-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
An S1G TIM PVB has 3 mandatory encoding modes, that being
block bitmap, single AID and OBL alongside the ability for
each encoding mode to be inverted. Introduce the ability to
parse the 3 encoding formats. The implementation specification
for the encoding formats can be found in IEEE80211-2024 9.4.2.5.
Signed-off-by: Arien Judge <arien.judge@morsemicro.com>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250725132221.258217-3-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
During GTK rekey, mac80211 issues a clear key (if the old key exists)
followed by an install key operation in the same context. This causes
ath11k to send two WMI commands in quick succession: one to clear the
old key and another to install the new key in the same slot.
Under certain conditions—especially under high load or time sensitive
scenarios, firmware may process these commands asynchronously in a way
that firmware assumes the key is cleared whereas hardware has a valid key.
This inconsistency between hardware and firmware leads to group addressed
packet drops. Only setting the same key again can restore a valid key in
firmware and allow packets to be transmitted.
This issue remained latent because the host's clear key commands were
not effective in firmware until commit 436a4e886598 ("ath11k: clear the
keys properly via DISABLE_KEY"). That commit enabled the host to
explicitly clear group keys, which inadvertently exposed the race.
To mitigate this, restrict group key clearing across all modes (AP, STA,
MESH). During rekey, the new key can simply be set on top of the previous
one, avoiding the need for a clear followed by a set.
However, in AP mode specifically, permit group key clearing when no
stations are associated. This exception supports transitions from secure
modes (e.g., WPA2/WPA3) to open mode, during which all associated peers
are removed and the group key is cleared as part of the transition.
Add a per-BSS station counter to track the presence of stations during
set key operations. Also add a reset_group_keys flag to track the key
re-installation state and avoid repeated installation of the same key
when the number of connected stations transitions to non-zero within a
rekey period.
Additionally, for AP and Mesh modes, when the first station associates,
reinstall the same group key that was last set. This ensures that the
firmware recovers from any race that may have occurred during a previous
key clear when no stations were associated.
This change ensures that key clearing is permitted only when no clients
are connected, avoiding packet loss while enabling dynamic security mode
transitions.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Reported-by: Steffen Moser <lists@steffen-moser.de>
Closes: https://lore.kernel.org/linux-wireless/c6366409-9928-4dd7-bf7b-ba7fcf20eabf@steffen-moser.de
Fixes: 436a4e886598 ("ath11k: clear the keys properly via DISABLE_KEY")
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Tested-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250810170018.1124014-1-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, when updating EMLSR capabilities of a multi-link (ML) station,
only the EMLSR parameters (e.g., padding delay, transition delay, and
timeout) are sent to firmware. However, firmware also requires the
EMLSR support flag to be set in the MLO flags of the peer assoc WMI
command to properly handle EML operating mode notification frames.
Set the ATH12K_WMI_FLAG_MLO_EMLSR_SUPPORT flag in the peer assoc WMI
command when the ML station is EMLSR-capable, so that the firmware can
respond to EHT EML action frames from associated stations.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: 4bcf9525bc49 ("wifi: ath12k: update EMLSR capabilities of ML Station")
Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250801104920.3326352-1-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
pas id is not used in qcom_mdt_load_no_init() and it should not
be used as it is non-PAS specific function and has no relation
to PAS specific mechanism.
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Acked-by: Jeff Johnson <jjohnson@kernel.org> # drivers/net/wireless/ath/ath12k/ahb.c
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250807074311.2381713-2-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Prepare for adding an enum type for NAPI threaded states by adding
netif_threaded_enable API. De-export the existing netif_set_threaded API
and only use it internally. Update existing drivers to use
netif_threaded_enable instead of the de-exported netif_set_threaded.
Note that dev_set_threaded used by mt76 debugfs file is unchanged.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250723013031.2911384-3-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Another wireless update:
- rtw89:
- STA+P2P concurrency
- support for USB devices RTL8851BU/RTL8852BU
- ath9k: OF support
- ath12k:
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- iwlwifi: some FIPS interoperability
- brcm80211: support SDIO 43751 device
- rt2x00: better DT/OF support
- cfg80211/mac80211:
- improved S1G support
- beacon monitor for MLO
* tag 'wireless-next-2025-07-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (199 commits)
ssb: use new GPIO line value setter callbacks for the second GPIO chip
wifi: Fix typos
wifi: brcmsmac: Use str_true_false() helper
wifi: brcmfmac: fix EXTSAE WPA3 connection failure due to AUTH TX failure
wifi: brcm80211: Remove yet more unused functions
wifi: brcm80211: Remove more unused functions
wifi: brcm80211: Remove unused functions
wifi: iwlwifi: Revert "wifi: iwlwifi: remove support of several iwl_ppag_table_cmd versions"
wifi: iwlwifi: check validity of the FW API range
wifi: iwlwifi: don't export symbols that we shouldn't
wifi: iwlwifi: mld: use spec link id and not FW link id
wifi: iwlwifi: mld: decode EOF bit for AMPDUs
wifi: iwlwifi: Remove support for rx OMI bandwidth reduction
wifi: iwlwifi: stop supporting iwl_omi_send_status_notif ver 1
wifi: iwlwifi: remove SC2F firmware support
wifi: iwlwifi: mvm: Remove NAN support
wifi: iwlwifi: mld: avoid outdated reorder buffer head_sn
wifi: iwlwifi: mvm: avoid outdated reorder buffer head_sn
wifi: iwlwifi: disable certain features for fips_enabled
wifi: iwlwifi: mld: support channel survey collection for ACS scans
...
====================
Link: https://patch.msgid.link/20250724100349.21564-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix typos in comments and error messages.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250723201741.2908456-1-helgaas@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath into wireless-next
Jeff Johnson says:
==================
ath.git patches for v6.17
Highlights for some specific drivers include:
ath9k:
Add AHB "of" support
ath11k:
Support device-specific firmware override
Fix potentially reordered access to device memory
ath12k:
Add more Wi-Fi 7 functionality
Add more statistics to DebugFS
Support different memory profiles
Support 802.11 encap/decap offload to firmware
Fix potentially reordered access to device memory
And of course there is the usual set of cleanups and bug fixes across
the entire family of "ath" drivers.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, if any error occurs during ath12k_dp_rx_peer_tid_setup(),
the tid value is already incremented, even though the corresponding
TID is not actually allocated. Proceed to
ath12k_dp_rx_peer_tid_delete() starting from unallocated tid,
which might leads to freeing unallocated TID and cause potential
crash or out-of-bounds access.
Hence, fix by correctly decrementing tid before cleanup to match only
the successfully allocated TIDs.
Also, remove tid-- from failure case of ath12k_dp_rx_peer_frag_setup(),
as decrementing the tid before cleanup in loop will take care of this.
Compile tested only.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250721061749.886732-1-quic_sarishar@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Due to the restrict in MAC80211 that DFS (Dynamic Frequency Selection)
can't be enabled on multiple channels, commit 176f3009ae59 ("wifi: ath12k:
support 2 channels for single pdev device") removes DFS support in order
to support 2 channels concurrently, making AP mode not working on DFS
channels [1].
Revert portions of that commit to bring DFS back, and add a new
combination to support 2-channels concurrency. This is valid because the
MAC80211 restrict works on each individual combination, but does not care
about them as a whole, as far as DFS is concerned.
This change applies to WCN7850 only, other chips are not affected.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: 176f3009ae59 ("wifi: ath12k: support 2 channels for single pdev device")
Reported-by: Mihai Moldovan <ionic@ionic.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220346 # 1
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Tested-by: Mihai Moldovan <ionic@ionic.de>
Link: https://patch.msgid.link/20250721-ath12k-dfs-v1-1-065c31454f91@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Prefer {} to {0} in initializers since {} works even when the first
member is not a scalar.
Generated using:
sed -i 's/{[[:space:]]*0[[:space:]]*}/{}/g' drivers/net/wireless/ath/ath12k/*
Compile tested only.
Link: https://patch.msgid.link/20250720-ath12k-zero-brace-v1-1-d8c8ca9d40a8@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Prefer {} to {0} in initializers since {} works even when the first
member is not a scalar.
Generated using:
sed -i 's/{[[:space:]]*0[[:space:]]*}/{}/g' drivers/net/wireless/ath/ath11k/*
Compile tested only.
Link: https://patch.msgid.link/20250720-ath11k-zero-brace-v1-1-6132e2ef1748@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Prefer {} to {0} in initializers since {} works even when the first
member is not a scalar.
Generated using:
sed -i 's/{[[:space:]]*0[[:space:]]*}/{}/g' drivers/net/wireless/ath/ath10k/*
Compile tested only.
Link: https://patch.msgid.link/20250720-ath10k-zero-brace-v1-1-c1ee818d6238@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, the mac80211 layer handles construction and parsing
of 802.11 headers during packet transmission and reception.
Offloading encapsulation and decapsulation to hardware can
significantly enhance performance. Check the service bit to determine
if the firmware supports Ethernet offload. If supported, advertise the
capability to mac80211 to bypass software-based 802.11 header
processing.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00217-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250718025513.32982-4-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
