summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)AuthorFilesLines
2026-03-04wifi: ath10k: fix lock protection in ath10k_wmi_event_peer_sta_ps_state_chg()Ziyi Guo1-2/+2
[ Upstream commit 820ba7dd6859ef8b1eaf6014897e7aa4756fc65d ] ath10k_wmi_event_peer_sta_ps_state_chg() uses lockdep_assert_held() to assert that ar->data_lock should be held by the caller, but neither ath10k_wmi_10_2_op_rx() nor ath10k_wmi_10_4_op_rx() acquire this lock before calling this function. The field arsta->peer_ps_state is documented as protected by ar->data_lock in core.h, and other accessors (ath10k_peer_ps_state_disable, ath10k_dbg_sta_read_peer_ps_state) properly acquire this lock. Add spin_lock_bh()/spin_unlock_bh() around the peer_ps_state update, and remove the lockdep_assert_held() to be aligned with new locking, following the pattern used by other WMI event handlers in the driver. Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20260123175611.767731-1-n7l8m4@u.northwestern.edu [removed excess blank line] Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04wifi: ath12k: fix preferred hardware mode calculationBaochen Qiang1-1/+1
[ Upstream commit 7f852de0003219c431a6f2ffd951fd82a4673660 ] For single pdev device like WCN7850/QCC2072, preferred_hw_mode is initialized to WMI_HOST_HW_MODE_SINGLE. Later when firmware sends supported modes to host, each mode is compared with the initial one and if the priority of the new mode is higher, update the parameter and store mode capability. For WCN7850, this does not result in issue, as one of the supported mode indeed has a higher priority. However the only available mode of QCC2072 at this stage is WMI_HOST_HW_MODE_SINGLE, which fails the comparison, hence mode capability is not stored. Subsequently driver initialization fails. Fix it by accepting a mode with the same priority. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20260112-ath12k-support-qcc2072-v2-4-fc8ce1e43969@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04wifi: ath11k: Fix failure to connect to a 6 GHz APQian Zhang1-3/+6
[ Upstream commit 0bc8c48de6f06c0cac52dde024ffda4433de6234 ] STA fails to connect to a 6 GHz AP with the following errors: ath11k_pci 0000:01:00.0: failed to handle chan list with power type 1 wlp1s0: deauthenticating from c8:a3:e8:dd:41:e3 by local choice (Reason: 3=DEAUTH_LEAVING) ath11k_reg_handle_chan_list() treats the update as redundant and returns -EINVAL. That causes the connection attempt to fail. Avoid unnecessary validation during association. Apply the regulatory redundant check only when the power type is IEEE80211_REG_UNSET_AP, which only occurs during core initialization. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 Signed-off-by: Qian Zhang <qian.zhang@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20260108034607.812885-1-qian.zhang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04wifi: ath11k: add pm quirk for Thinkpad Z13/Z16 Gen1Ross Vandegrift1-0/+28
[ Upstream commit 4015b1972763d7d513172276e51439f37e622a92 ] Z16 Gen1 has the wakeup-from-suspend issues from [1] but was never added to the appropriate quirk list. I've tested this patch on top of 6.18.2, it fixes the issue for me on 21D4 Mark Pearson provided the other product IDs covering the second Z16 Gen1 and both Z13 Gen1 identifiers. They share the same firmware, and folks in the bugzilla report do indeed see the problem on Z13. [1] - https://bugzilla.kernel.org/show_bug.cgi?id=219196 Signed-off-by: Ross Vandegrift <ross@kallisti.us> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://patch.msgid.link/wj7o2kmb7g54stdjvxp2hjqrnutnq3jbf4s2uh4ctvmlxdq7tf@nbkj2ebakhrd Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04wifi: ath10k: sdio: add missing lock protection in ath10k_sdio_fw_crashed_dump()Ziyi Guo1-0/+6
[ Upstream commit e55ac348089e579fc224569c7bd90340bf2439f9 ] ath10k_sdio_fw_crashed_dump() calls ath10k_coredump_new() which requires ar->dump_mutex to be held, as indicated by lockdep_assert_held() in that function. However, the SDIO implementation does not acquire this lock, unlike the PCI and SNOC implementations which properly hold the mutex. Additionally, ar->stats.fw_crash_counter is documented as protected by ar->data_lock in core.h, but the SDIO implementation modifies it without holding this spinlock. Add the missing mutex_lock()/mutex_unlock() around the coredump operations, and add spin_lock_bh()/spin_unlock_bh() around the fw_crash_counter increment, following the pattern used in ath10k_pci_fw_dump_work() and ath10k_snoc_fw_crashed_dump(). Fixes: 3c45f21af84e ("ath10k: sdio: add firmware coredump support") Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20260123045822.2221549-1-n7l8m4@u.northwestern.edu Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor modeKang Yang1-2/+8
[ Upstream commit 63b7af49496d0e32f7a748b6af3361ec138b1bd3 ] ath11k_hal_srng_* should be used with srng->lock to protect srng data. For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(), they use ath11k_hal_srng_* for many times but never call srng->lock. So when running (full) monitor mode, warning will occur: RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] Call Trace: ? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k] ? idr_alloc_u32+0x97/0xd0 ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k] ath11k_dp_service_srng+0x289/0x5a0 [ath11k] ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k] __napi_poll+0x30/0x1f0 net_rx_action+0x198/0x320 __do_softirq+0xdd/0x319 So add srng->lock for them to avoid such warnings. Inorder to fetch the srng->lock, should change srng's definition from 'void' to 'struct hal_srng'. And initialize them elsewhere to prevent one line of code from being too long. This is consistent with other ring process functions, such as ath11k_dp_process_rx(). Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241219110531.2096-3-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Li hongliang <1468888505@139.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-30wifi: ath11k: fix RCU stall while reaping monitor destination ringP Praneesh1-2/+2
[ Upstream commit 16c6c35c03ea73054a1f6d3302a4ce4a331b427d ] While processing the monitor destination ring, MSDUs are reaped from the link descriptor based on the corresponding buf_id. However, sometimes the driver cannot obtain a valid buffer corresponding to the buf_id received from the hardware. This causes an infinite loop in the destination processing, resulting in a kernel crash. kernel log: ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309 ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309 ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed Fix this by skipping the problematic buf_id and reaping the next entry, replacing the break with the next MSDU processing. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241219110531.2096-2-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Li hongliang <1468888505@139.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-30wifi: ath12k: fix dma_free_coherent() pointerThomas Fourier1-6/+6
commit bb97131fbf9b708dd9616ac2bdc793ad102b5c48 upstream. dma_alloc_coherent() allocates a DMA mapped buffer and stores the addresses in XXX_unaligned fields. Those should be reused when freeing the buffer rather than the aligned addresses. Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Cc: stable@vger.kernel.org Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20260106084905.18622-2-fourier.thomas@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-30wifi: ath10k: fix dma_free_coherent() pointerThomas Fourier1-8/+8
commit 9282a1e171ad8d2205067e8ec3bbe4e3cef4f29f upstream. dma_alloc_coherent() allocates a DMA mapped buffer and stores the addresses in XXX_unaligned fields. Those should be reused when freeing the buffer rather than the aligned addresses. Fixes: 2a1e1ad3fd37 ("ath10k: Add support for 64 bit ce descriptor") Cc: stable@vger.kernel.org Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20260105210439.20131-2-fourier.thomas@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-18wifi: ath12k: fix potential memory leak in ath12k_wow_arp_ns_offload()Abdun Nihaal1-0/+1
[ Upstream commit be5febd51c478bc8e24ad3480435f2754a403b14 ] When the call to ath12k_wmi_arp_ns_offload() fails, the temporary memory allocation for offload is not freed before returning. Fix that by freeing offload in the error path. Fixes: 1666108c74c4 ("wifi: ath12k: support ARP and NS offload") Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251028170457.134608-1-nihaal@cse.iitm.ac.in Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18wifi: ath11k: fix peer HE MCS assignmentBaochen Qiang2-4/+7
[ Upstream commit 4a013ca2d490c73c40588d62712ffaa432046a04 ] In ath11k_wmi_send_peer_assoc_cmd(), peer's transmit MCS is sent to firmware as receive MCS while peer's receive MCS sent as transmit MCS, which goes against firmwire's definition. While connecting to a misbehaved AP that advertises 0xffff (meaning not supported) for 160 MHz transmit MCS map, firmware crashes due to 0xffff is assigned to he_mcs->rx_mcs_set field. Ext Tag: HE Capabilities [...] Supported HE-MCS and NSS Set [...] Rx and Tx MCS Maps 160 MHz [...] Tx HE-MCS Map 160 MHz: 0xffff Swap the assignment to fix this issue. As the HE rate control mask is meant to limit our own transmit MCS, it needs to go via he_mcs->rx_mcs_set field. With the aforementioned swapping done, change is needed as well to apply it to the peer's receive MCS. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Fixes: 61fe43e7216d ("ath11k: add support for setting fixed HE rate/gi/ltf") Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20251017-ath11k-mcs-assignment-v1-2-da40825c1783@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18wifi: ath11k: fix VHT MCS assignmentBaochen Qiang3-7/+12
[ Upstream commit 47d0cd6bccb4604192633cc8d29511e85d811fc0 ] While associating, firmware needs to know peer's receive capability to calculate its own VHT transmit MCS, currently host sends this information to firmware via mcs->rx_mcs_set field, this is wrong as firmware actually takes it from mcs->tx_mcs_set field. Till now there is no failure seen due to this, most likely because almost all peers are advertising the same capability for both transmit and receive. Swap the assignment to fix it. Besides, rate control mask is meant to limit our own transmit MCS, hence need to go via mcs->tx_mcs_set field. With the aforementioned swapping done, change is needed as well to apply it to the peer's receive capability rather than transmit capability. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20251017-ath11k-mcs-assignment-v1-1-da40825c1783@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18wifi: ath11k: restore register window after global resetBaochen Qiang1-1/+19
[ Upstream commit 596b911644cc19ecba0dbc9c92849fb59390e29a ] Hardware target implements an address space larger than that PCI BAR can map. In order to be able to access the whole target address space, the BAR space is split into 4 segments, of which the last 3, called windows, can be dynamically mapped to the desired area. This is achieved by updating window register with appropriate window value. Currently each time when accessing a register that beyond ATH11K_PCI_WINDOW_START, host calculates the window value and caches it after window update, this way next time when accessing a register falling in the same window, host knows that the window is already good hence no additional update needed. However this mechanism breaks after global reset is triggered in ath11k_pci_soc_global_reset(), because with global reset hardware resets window register hence the window is not properly mapped any more. Current host does nothing about this, as a result a subsequent register access may not work as expected if it falls in a window same as before. Although there is no obvious issue seen now, better to fix it to avoid future problem. The fix is done by restoring the window register after global reset. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20251014-ath11k-reset-window-cache-v1-1-b85271b111dd@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18wifi: ath10k: move recovery check logic into a new workKang Yang3-13/+11
[ Upstream commit f35a07a4842a88801d9182b1a76d178bfa616978 ] Currently, ath10k has a recovery check logic. It will wait for the last recovery to finish by wait_for_completion_timeout(); But in SDIO scenarios, the recovery function may be invoked from interrupt context, where long blocking waits are undesirable and can lead to system instability. Additionally, Linux’s ordered workqueue processes one task at a time. If a previous recovery is still queued or executing, new triggers are ignored. This prevents accurate tracking of consecutive failures and delays transition to the WEDGED state. To address this, move the recovery check logic into a different workqueue. Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1 Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00189 Fixes: c256a94d1b1b ("wifi: ath10k: shutdown driver when hardware is unreliable") Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251014110757.155-1-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18wifi: ath10k: Add missing include of export.hJeff Johnson10-0/+21
[ Upstream commit 32c3a0f8894311c743b2a6a15b50b13d01411ce1 ] Commit a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") introduced a new check that is producing the following warnings: drivers/net/wireless/ath/ath10k/bmi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/net/wireless/ath/ath10k/ce.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/net/wireless/ath/ath10k/core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/net/wireless/ath/ath10k/coredump.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/net/wireless/ath/ath10k/debug.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/net/wireless/ath/ath10k/htc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/net/wireless/ath/ath10k/htt_rx.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/net/wireless/ath/ath10k/htt_tx.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/net/wireless/ath/ath10k/mac.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/net/wireless/ath/ath10k/trace.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing Add the missing #include to satisfy the check. Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250611-ath-unused-export-v1-3-c36819df7e7b@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Stable-dep-of: f35a07a4842a ("wifi: ath10k: move recovery check logic into a new work") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18wifi: ath10k: Avoid vdev delete timeout when firmware is already downLoic Poulain1-8/+25
[ Upstream commit dc9c4252fe0d7a7f1ee904405ea91534277305bf ] In some scenarios, the firmware may be stopped before the interface is removed, either due to a crash or because the remoteproc (e.g., MPSS) is shut down early during system reboot or shutdown. This leads to a delay during interface teardown, as the driver waits for a vdev delete response that never arrives, eventually timing out. Example (SNOC): $ echo stop > /sys/class/remoteproc/remoteproc0/state [ 71.64] remoteproc remoteproc0: stopped remote processor modem $ reboot [ 74.84] ath10k_snoc c800000.wifi: failed to transmit packet, dropping: -108 [ 74.84] ath10k_snoc c800000.wifi: failed to submit frame: -108 [...] [ 82.39] ath10k_snoc c800000.wifi: Timeout in receiving vdev delete response To avoid this, skip waiting for the vdev delete response if the firmware is already marked as unreachable (`ATH10K_FLAG_CRASH_FLUSH`), similar to how `ath10k_mac_wait_tx_complete()` and `ath10k_vdev_setup_sync()` handle this case. Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Link: https://patch.msgid.link/20250522131704.612206-1-loic.poulain@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Stable-dep-of: f35a07a4842a ("wifi: ath10k: move recovery check logic into a new work") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07wifi: ath12k: correctly handle mcast packets for clientsSarika Sharma3-0/+10
commit 4541b0c8c3c1b85564971d497224e57cf8076a02 upstream. Currently, RX is_mcbc bit is set for packets sent from client as destination address (DA) is multicast/broadcast address, but packets are actually unicast as receiver address (RA) is not multicast address. Hence, packets are not handled properly due to this is_mcbc bit. Therefore, reset the is_mcbc bit if interface type is AP. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250411061523.859387-3-quic_sarishar@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> [ Adjust context ] Signed-off-by: Oliver Sedlbauer <os@dev.tdt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-24wifi: ath11k: Clear affinity hint before calling ath11k_pcic_free_irq() in ↵Manivannan Sadhasivam1-0/+2
error path [ Upstream commit 68410c5bd381a81bcc92b808e7dc4e6b9ed25d11 ] If a shared IRQ is used by the driver due to platform limitation, then the IRQ affinity hint is set right after the allocation of IRQ vectors in ath11k_pci_alloc_msi(). This does no harm unless one of the functions requesting the IRQ fails and attempt to free the IRQ. This results in the below warning: WARNING: CPU: 7 PID: 349 at kernel/irq/manage.c:1929 free_irq+0x278/0x29c Call trace: free_irq+0x278/0x29c ath11k_pcic_free_irq+0x70/0x10c [ath11k] ath11k_pci_probe+0x800/0x820 [ath11k_pci] local_pci_probe+0x40/0xbc The warning is due to not clearing the affinity hint before freeing the IRQs. So to fix this issue, clear the IRQ affinity hint before calling ath11k_pcic_free_irq() in the error path. The affinity will be cleared once again further down the error path due to code organization, but that does no harm. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-05266-QCAHSTSWPLZ_V2_TO_X86-1 Cc: Baochen Qiang <quic_bqiang@quicinc.com> Fixes: 39564b475ac5 ("wifi: ath11k: fix boot failure with one MSI vector") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://patch.msgid.link/20250225053447.16824-2-manivannan.sadhasivam@linaro.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Wenshan Lan <jetlan9@163.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-24wifi: ath11k: zero init info->status in wmi_process_mgmt_tx_comp()Nicolas Escande1-0/+3
[ Upstream commit 9065b968752334f972e0d48e50c4463a172fc2a7 ] When reporting tx completion using ieee80211_tx_status_xxx() family of functions, the status part of the struct ieee80211_tx_info nested in the skb is used to report things like transmit rates & retry count to mac80211 On the TX data path, this is correctly memset to 0 before calling ieee80211_tx_status_ext(), but on the tx mgmt path this was not done. This leads to mac80211 treating garbage values as valid transmit counters (like tx retries for example) and accounting them as real statistics that makes their way to userland via station dump. The same issue was resolved in ath12k by commit 9903c0986f78 ("wifi: ath12k: Add memset and update default rate value in wmi tx completion") Tested-on: QCN9074 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Nicolas Escande <nico.escande@gmail.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251104083957.717825-1-nico.escande@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-13Revert "wifi: ath10k: avoid unnecessary wait for service ready message"Baochen Qiang1-19/+20
commit 2469bb6a6af944755a7d7daf66be90f3b8decbf9 upstream. This reverts commit 51a73f1b2e56b0324b4a3bb8cebc4221b5be4c7a. Although this commit benefits QCA6174, it breaks QCA988x and QCA9984 [1][2]. Since it is not likely to root cause/fix this issue in a short time, revert it to get those chips back. Compile tested only. Fixes: 51a73f1b2e56 ("wifi: ath10k: avoid unnecessary wait for service ready message") Link: https://lore.kernel.org/ath10k/6d41bc00602c33ffbf68781f563ff2e6c6915a3e.camel@gmail.com # [1] Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220671 # [2] Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20251027-ath10k-revert-polling-first-change-v1-1-89aaf3bcbfa1@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-13wifi: ath12k: Increase DP_REO_CMD_RING_SIZE to 256Nithyanantham Paramasivam1-1/+1
[ Upstream commit 82993345aef6987a916337ebd2fca3ff4a6250a7 ] Increase DP_REO_CMD_RING_SIZE from 128 to 256 to avoid queuing failures observed during stress test scenarios. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250806111750.3214584-2-nithyanantham.paramasivam@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-13wifi: ath10k: Fix connection after GTK rekeyingLoic Poulain1-2/+10
[ Upstream commit 487e8a8c3421df0af3707e54c7e069f1d89cbda7 ] It appears that not all hardware/firmware implementations support group key deletion correctly, which can lead to connection hangs and deauthentication following GTK rekeying (delete and install). To avoid this issue, instead of attempting to delete the key using the special WMI_CIPHER_NONE value, we now replace the key with an invalid (random) value. This behavior has been observed with WCN39xx chipsets. Tested-on: WCN3990 hw1.0 WLAN.HL.3.3.7.c2-00931-QCAHLSWMTPLZ-1 Reported-by: Alexey Klimov <alexey.klimov@linaro.org> Closes: https://lore.kernel.org/all/DAWJQ2NIKY28.1XOG35E4A682G@linaro.org Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # QRB2210 RB1 Link: https://patch.msgid.link/20250902143225.837487-1-loic.poulain@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-13wifi: ath11k: avoid bit operation on key flagsRameshkumar Sundaram1-5/+5
[ Upstream commit 9c78e747dd4fee6c36fcc926212e20032055cf9d ] Bitwise operations with WMI_KEY_PAIRWISE (defined as 0) are ineffective and misleading. This results in pairwise key validations added in commit 97acb0259cc9 ("wifi: ath11k: fix group data packet drops during rekey") to always evaluate false and clear key commands for pairwise keys are not honored. Since firmware supports overwriting the new key without explicitly clearing the previous one, there is no visible impact currently. However, to restore consistency with the previous behavior and improve clarity, replace bitwise operations with direct assignments and comparisons for key flags. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1 Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-wireless/aLlaetkalDvWcB7b@stanley.mountain Fixes: 97acb0259cc9 ("wifi: ath11k: fix group data packet drops during rekey") Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20251003092158.1080637-1-rameshkumar.sundaram@oss.qualcomm.com [update copyright per current guidance] Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-13wifi: ath11k: add support for MU EDCAYu Zhang(Yuriy)4-10/+67
[ Upstream commit b78c02f7c7104f1e77ade12ebde267e6fb388ca9 ] The current code does not have the MU EDCA feature, so it cannot support the use of EDCA by STA in specific UL MU HE TB PPDU transmissions. Refer to IEEE Std 802.11ax-2021 "9.4.2.251 MU EDCA Parameter Set element", "26.2.7 EDCA operation using MU EDCA parameters". Add ath11k_mac_op_conf_tx_mu_edca() to construct the MU EDCA parameters received from mac80211 into WMI WMM parameters，and send to the firmware according to the different WMM type flags. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04523-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 Signed-off-by: Yu Zhang (Yuriy) <quic_yuzha@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250124061343.2263467-1-quic_yuzha@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Stable-dep-of: 9c78e747dd4f ("wifi: ath11k: avoid bit operation on key flags") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-13wifi: ath12k: free skb during idr cleanup callbackKarthik M1-16/+18
[ Upstream commit 92282074e1d2e7b6da5c05fe38a7cc974187fe14 ] ath12k just like ath11k [1] did not handle skb cleanup during idr cleanup callback. Both ath12k_mac_vif_txmgmt_idr_remove() and ath12k_mac_tx_mgmt_pending_free() performed idr cleanup and DMA unmapping for skb but only ath12k_mac_tx_mgmt_pending_free() freed skb. As a result, during vdev deletion a memory leak occurs. Refactor all clean up steps into a new function. New function ath12k_mac_tx_mgmt_free() creates a centralized area where idr cleanup, DMA unmapping for skb and freeing skb is performed. Utilize skb pointer given by idr_remove(), instead of passed as a function argument because IDR will be protected by locking. This will prevent concurrent modification of the same IDR. Now ath12k_mac_tx_mgmt_pending_free() and ath12k_mac_vif_txmgmt_idr_remove() call ath12k_mac_tx_mgmt_free(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Link: https://lore.kernel.org/r/1637832614-13831-1-git-send-email-quic_srirrama@quicinc.com > # [1] Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Karthik M <quic_karm@quicinc.com> Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20250923220316.1595758-1-muna.sinada@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-13wifi: ath11k: Add missing platform IDs for quirk tableMark Pearson1-6/+48
[ Upstream commit 0eb002c93c3b47f88244cecb1e356eaeab61a6bf ] Lenovo platforms can come with one of two different IDs. The pm_quirk table was missing the second ID for each platform. Add missing ID and some extra platform identification comments. Reported on https://bugzilla.kernel.org/show_bug.cgi?id=219196 Tested-on: P14s G4 AMD. Fixes: ce8669a27016 ("wifi: ath11k: determine PM policy based on machine model") Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219196 Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20250929192146.1789648-1-mpearson-lenovo@squebb.ca Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-13wifi: ath10k: Fix memory leak on unsupported WMI commandLoic Poulain1-0/+1
[ Upstream commit 2e9c1da4ee9d0acfca2e0a3d78f3d8cb5802da1b ] ath10k_wmi_cmd_send takes ownership of the passed buffer (skb) and has the responsibility to release it in case of error. This patch fixes missing free in case of early error due to unhandled WMI command ID. Tested-on: WCN3990 hw1.0 WLAN.HL.3.3.7.c2-00931-QCAHLSWMTPLZ-1 Fixes: 553215592f14 ("ath10k: warn if give WMI command is not supported") Suggested-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20250926195656.187970-1-loic.poulain@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-02wifi: ath12k: fix read pointer after free in ath12k_mac_assign_vif_to_vdev()Aditya Kumar Singh1-3/+3
[ Upstream commit 5a10971c7645a95f5d5dc23c26fbac4bf61801d0 ] In ath12k_mac_assign_vif_to_vdev(), if arvif is created on a different radio, it gets deleted from that radio through a call to ath12k_mac_unassign_link_vif(). This action frees the arvif pointer. Subsequently, there is a check involving arvif, which will result in a read-after-free scenario. Fix this by moving this check after arvif is again assigned via call to ath12k_mac_assign_link_vif(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Closes: https://scan5.scan.coverity.com/#/project-view/63541/10063?selectedIssue=1636423 Fixes: b5068bc9180d ("wifi: ath12k: Cache vdev configs before vdev create") Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241210-read_after_free-v1-1-969f69c7d66c@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Amelia Crate <acrate@waldn.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-19wifi: ath11k: HAL SRNG: don't deinitialize and re-initialize againMuhammad Usama Anjum3-5/+18
commit 32be3ca4cf78b309dfe7ba52fe2d7cc3c23c5634 upstream. Don't deinitialize and reinitialize the HAL helpers. The dma memory is deallocated and there is high possibility that we'll not be able to get the same memory allocated from dma when there is high memory pressure. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.6 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Cc: stable@vger.kernel.org Cc: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Link: https://patch.msgid.link/20250722053121.1145001-1-usama.anjum@collabora.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-15wifi: ath10k: avoid unnecessary wait for service ready messageBaochen Qiang1-20/+19
[ Upstream commit 51a73f1b2e56b0324b4a3bb8cebc4221b5be4c7a ] Commit e57b7d62a1b2 ("wifi: ath10k: poll service ready message before failing") works around the failure in waiting for the service ready message by active polling. Note the polling is triggered after initial wait timeout, which means that the wait-till-timeout can not be avoided even the message is ready. A possible fix is to do polling once before wait as well, however this can not handle the race that the message arrives right after polling. So the solution is to do periodic polling until timeout. Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00309-QCARMSWPZ-1 Fixes: e57b7d62a1b2 ("wifi: ath10k: poll service ready message before failing") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/all/97a15967-5518-4731-a8ff-d43ff7f437b0@molgen.mpg.de Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250811-ath10k-avoid-unnecessary-wait-v1-1-db2deb87c39b@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-15wifi: ath12k: fix wrong logging ID used for CEBaochen Qiang2-1/+2
[ Upstream commit 43746f13fec67f6f223d64cfe96c095c9b468e70 ] ATH12K_DBG_AHB is used for CE logging which is not proper. Add ATH12K_DBG_CE and replace ATH12K_DBG_AHB with it. Compile tested only. Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250815-ath-dont-warn-on-ce-enqueue-fail-v1-2-f955ddc3ba7a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-06wifi: ath11k: fix NULL dereference in ath11k_qmi_m3_load()Matvey Kovalev1-1/+1
commit 3fd2ef2ae2b5c955584a3bee8e83ae7d7a98f782 upstream. If ab->fw.m3_data points to data, then fw pointer remains null. Further, if m3_mem is not allocated, then fw is dereferenced to be passed to ath11k_err function. Replace fw->size by m3_len. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 7db88b962f06 ("wifi: ath11k: add firmware-2.bin support") Cc: stable@vger.kernel.org Signed-off-by: Matvey Kovalev <matvey.kovalev@ispras.ru> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250917192020.1340-1-matvey.kovalev@ispras.ru Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-09wifi: ath11k: update channel list in worker when wait flag is setWen Gong6-28/+81
commit 02aae8e2f957adc1b15b6b8055316f8a154ac3f5 upstream. With previous patch "wifi: ath11k: move update channel list from update reg worker to reg notifier", ath11k_reg_update_chan_list() will be called during reg_process_self_managed_hint(). reg_process_self_managed_hint() will hold rtnl_lock all the time. But ath11k_reg_update_chan_list() may increase the occupation time of rtnl_lock, because when wait flag is set, wait_for_completion_timeout() will be called during 11d/hw scan. Should minimize the occupation time of rtnl_lock as much as possible to avoid interfering with rest of the system. So move the update channel list operation to a new worker, so that wait_for_completion_timeout() won't be called and will not increase the occupation time of rtnl_lock. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Co-developed-by: Kang Yang <quic_kangyang@quicinc.com> Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Reviewed-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20250117061737.1921-3-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-09wifi: ath11k: update channel list in reg notifier instead reg workerWen Gong1-7/+15
commit 933ab187e679e6fbdeea1835ae39efcc59c022d2 upstream. Currently when ath11k gets a new channel list, it will be processed according to the following steps: 1. update new channel list to cfg80211 and queue reg_work. 2. cfg80211 handles new channel list during reg_work. 3. update cfg80211's handled channel list to firmware by ath11k_reg_update_chan_list(). But ath11k will immediately execute step 3 after reg_work is just queued. Since step 2 is asynchronous, cfg80211 may not have completed handling the new channel list, which may leading to an out-of-bounds write error: BUG: KASAN: slab-out-of-bounds in ath11k_reg_update_chan_list Call Trace: ath11k_reg_update_chan_list+0xbfe/0xfe0 [ath11k] kfree+0x109/0x3a0 ath11k_regd_update+0x1cf/0x350 [ath11k] ath11k_regd_update_work+0x14/0x20 [ath11k] process_one_work+0xe35/0x14c0 Should ensure step 2 is completely done before executing step 3. Thus Wen raised patch[1]. When flag NL80211_REGDOM_SET_BY_DRIVER is set, cfg80211 will notify ath11k after step 2 is done. So enable the flag NL80211_REGDOM_SET_BY_DRIVER then cfg80211 will notify ath11k after step 2 is done. At this time, there will be no KASAN bug during the execution of the step 3. [1] https://patchwork.kernel.org/project/linux-wireless/patch/20230201065313.27203-1-quic_wgong@quicinc.com/ Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: f45cb6b29cd3 ("wifi: ath11k: avoid deadlock during regulatory update in ath11k_regd_update()") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Reviewed-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20250117061737.1921-2-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-09wifi: ath11k: fix group data packet drops during rekeyRameshkumar Sundaram2-9/+104
[ Upstream commit 97acb0259cc9cbfbd7ab689e25684f3d8ce10e26 ] During GTK rekey, mac80211 issues a clear key (if the old key exists) followed by an install key operation in the same context. This causes ath11k to send two WMI commands in quick succession: one to clear the old key and another to install the new key in the same slot. Under certain conditions—especially under high load or time sensitive scenarios, firmware may process these commands asynchronously in a way that firmware assumes the key is cleared whereas hardware has a valid key. This inconsistency between hardware and firmware leads to group addressed packet drops. Only setting the same key again can restore a valid key in firmware and allow packets to be transmitted. This issue remained latent because the host's clear key commands were not effective in firmware until commit 436a4e886598 ("ath11k: clear the keys properly via DISABLE_KEY"). That commit enabled the host to explicitly clear group keys, which inadvertently exposed the race. To mitigate this, restrict group key clearing across all modes (AP, STA, MESH). During rekey, the new key can simply be set on top of the previous one, avoiding the need for a clear followed by a set. However, in AP mode specifically, permit group key clearing when no stations are associated. This exception supports transitions from secure modes (e.g., WPA2/WPA3) to open mode, during which all associated peers are removed and the group key is cleared as part of the transition. Add a per-BSS station counter to track the presence of stations during set key operations. Also add a reset_group_keys flag to track the key re-installation state and avoid repeated installation of the same key when the number of connected stations transitions to non-zero within a rekey period. Additionally, for AP and Mesh modes, when the first station associates, reinstall the same group key that was last set. This ensures that the firmware recovers from any race that may have occurred during a previous key clear when no stations were associated. This change ensures that key clearing is permitted only when no clients are connected, avoiding packet loss while enabling dynamic security mode transitions. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1 Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 Reported-by: Steffen Moser <lists@steffen-moser.de> Closes: https://lore.kernel.org/linux-wireless/c6366409-9928-4dd7-bf7b-ba7fcf20eabf@steffen-moser.de Fixes: 436a4e886598 ("ath11k: clear the keys properly via DISABLE_KEY") Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250810170018.1124014-1-rameshkumar.sundaram@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28wifi: ath11k: fix dest ring-buffer corruption when ring is fullJohan Hovold1-2/+9
commit aa6956150f820e6a6deba44be325ddfcb5b10f88 upstream. Add the missing memory barriers to make sure that destination ring descriptors are read before updating the tail pointer (and passing ownership to the device) to avoid memory corruption on weakly ordered architectures like aarch64 when the ring is full. Tested-on: WCN6855 hw2.1 WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Cc: stable@vger.kernel.org # 5.6 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://patch.msgid.link/20250604143457.26032-6-johan+linaro@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28wifi: ath11k: fix source ring-buffer corruptionJohan Hovold1-1/+9
commit 6efa0df54022c6c9fd4d294b87622c7fcdc418c8 upstream. Add the missing memory barrier to make sure that LMAC source ring descriptors are written before updating the head pointer to avoid passing stale data to the firmware on weakly ordered architectures like aarch64. Note that non-LMAC rings use MMIO write accessors which have the required write memory barrier. Tested-on: WCN6855 hw2.1 WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Cc: stable@vger.kernel.org # 5.6 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://patch.msgid.link/20250604143457.26032-5-johan+linaro@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28wifi: ath11k: fix dest ring-buffer corruptionJohan Hovold3-7/+11
commit 8c1ba5091fa9a2d1478da63173b16a701bdf86bb upstream. Add the missing memory barrier to make sure that destination ring descriptors are read after the head pointers to avoid using stale data on weakly ordered architectures like aarch64. The barrier is added to the ath11k_hal_srng_access_begin() helper for symmetry with follow-on fixes for source ring buffer corruption which will add barriers to ath11k_hal_srng_access_end(). Tested-on: WCN6855 hw2.1 WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Cc: stable@vger.kernel.org # 5.6 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://patch.msgid.link/20250604143457.26032-2-johan+linaro@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28wifi: ath12k: fix dest ring-buffer corruption when ring is fullJohan Hovold1-2/+9
commit ed32169be1ccb9b1a295275ba7746dc6bf103e80 upstream. Add the missing memory barriers to make sure that destination ring descriptors are read before updating the tail pointer (and passing ownership to the device) to avoid memory corruption on weakly ordered architectures like aarch64 when the ring is full. Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Cc: stable@vger.kernel.org # 6.3 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://patch.msgid.link/20250617084402.14475-5-johan+linaro@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28wifi: ath12k: fix source ring-buffer corruptionJohan Hovold1-1/+9
commit e834da4cbd6fe1d24f89368bf0c80adcad212726 upstream. Add the missing memory barrier to make sure that LMAC source ring descriptors are written before updating the head pointer to avoid passing stale data to the firmware on weakly ordered architectures like aarch64. Note that non-LMAC rings use MMIO write accessors which have the required write memory barrier. Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Cc: stable@vger.kernel.org # 6.3 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://patch.msgid.link/20250617084402.14475-4-johan+linaro@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28wifi: ath12k: fix dest ring-buffer corruptionJohan Hovold2-6/+14
commit 8157ce533a60521f21d466eb4de45d9735b19484 upstream. Add the missing memory barrier to make sure that destination ring descriptors are read after the head pointers to avoid using stale data on weakly ordered architectures like aarch64. The barrier is added to the ath12k_hal_srng_access_begin() helper for symmetry with follow-on fixes for source ring buffer corruption which will add barriers to ath12k_hal_srng_access_end(). Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Cc: stable@vger.kernel.org # 6.3 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://patch.msgid.link/20250617084402.14475-2-johan+linaro@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20wifi: ath12k: Decrement TID on RX peer frag setup error handlingKarthikeyan Kathirvel1-0/+1
[ Upstream commit 7c0884fcd2ddde0544d2e77f297ae461e1f53f58 ] Currently, TID is not decremented before peer cleanup, during error handling path of ath12k_dp_rx_peer_frag_setup(). This could lead to out-of-bounds access in peer->rx_tid[]. Hence, add a decrement operation for TID, before peer cleanup to ensures proper cleanup and prevents out-of-bounds access issues when the RX peer frag setup fails. Found during code review. Compile tested only. Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250526034713.712592-1-quic_sarishar@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-20wifi: ath12k: Enable REO queue lookup table feature on QCN9274 hw2.0Raj Kumar Bhagat1-1/+1
[ Upstream commit b79742b84e16e41c4a09f3126436f39f36e75c06 ] The commit 89ac53e96217 ("wifi: ath12k: Enable REO queue lookup table feature on QCN9274") originally intended to enable the reoq_lut_support hardware parameter flag for both QCN9274 hw1.0 and hw2.0. However, it enabled it only for QCN9274 hw1.0. Hence, enable REO queue lookup table feature on QCN9274 hw2.0. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250609-qcn9274-reoq-v1-1-a92c91abc9b9@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-20wifi: ath12k: Fix station association with MBSSID Non-TX BSSHari Chandrakanthan1-0/+1
[ Upstream commit 70eeacc1a92a444f4b5777ab19e1c378a5edc8dd ] ath12k station is unable to associate with non-transmitting BSSes in a Multiple BSS set because the user-space does not receive information about the non-transmitting BSSes from mac80211's scan results. The ath12k driver does not advertise its MBSSID capability to mac80211, resulting in wiphy->support_mbssid not being set. Consequently, the information about non-transmitting BSS is not parsed from received Beacon/Probe response frames and is therefore not included in the scan results. Fix this by advertising the MBSSID capability of ath12k driver to mac80211. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com> Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250530035615.3178480-2-rameshkumar.sundaram@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-20wifi: ath12k: Add memset and update default rate value in wmi tx completionSarika Sharma1-0/+5
[ Upstream commit 9903c0986f782dfc511d7638b6f15fb6e8600cd3 ] When both AP/STA and monitor interfaces are enabled, ieee80211_tx_status() is invoked from two paths: the TX completion handler for data frames and the WMI TX completion handler for management frames. In the data path, the skb->cb is properly zeroed using memset, but in the WMI path, this step is missing. As a result, mac80211 encountered uninitialized (junk) values in skb->cb when generating the radiotap header for monitor mode, leading to invalid radiotap lengths. Hence, explicitly zero the status field in the skb->cb using memset in WMI TX completion path to ensure consistent and correct behavior during WMI tx completion path. Additionally, set info->status.rates[0].idx = -1 to indicate that no valid rate information is available, avoiding misinterpretation of garbage values. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250603063512.1887652-1-quic_sarishar@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-20wifi: ath10k: shutdown driver when hardware is unreliableKang Yang4-9/+63
[ Upstream commit c256a94d1b1b15109740306f7f2a7c2173e12072 ] In rare cases, ath10k may lose connection with the PCIe bus due to some unknown reasons, which could further lead to system crashes during resuming due to watchdog timeout: ath10k_pci 0000:01:00.0: wmi command 20486 timeout, restarting hardware ath10k_pci 0000:01:00.0: already restarting ath10k_pci 0000:01:00.0: failed to stop WMI vdev 0: -11 ath10k_pci 0000:01:00.0: failed to stop vdev 0: -11 ieee80211 phy0: PM: **** DPM device timeout **** Call Trace: panic+0x125/0x315 dpm_watchdog_set+0x54/0x54 dpm_watchdog_handler+0x57/0x57 call_timer_fn+0x31/0x13c At this point, all WMI commands will timeout and attempt to restart device. So set a threshold for consecutive restart failures. If the threshold is exceeded, consider the hardware is unreliable and all ath10k operations should be skipped to avoid system crash. fail_cont_count and pending_recovery are atomic variables, and do not involve complex conditional logic. Therefore, even if recovery check and reconfig complete are executed concurrently, the recovery mechanism will not be broken. Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Link: https://patch.msgid.link/20250623022731.509-1-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-20wifi: ath12k: Correct tid cleanup when tid setup failsSarika Sharma1-1/+1
[ Upstream commit 4a2bf707270f897ab8077baee8ed5842a5321686 ] Currently, if any error occurs during ath12k_dp_rx_peer_tid_setup(), the tid value is already incremented, even though the corresponding TID is not actually allocated. Proceed to ath12k_dp_rx_peer_tid_delete() starting from unallocated tid, which might leads to freeing unallocated TID and cause potential crash or out-of-bounds access. Hence, fix by correctly decrementing tid before cleanup to match only the successfully allocated TIDs. Also, remove tid-- from failure case of ath12k_dp_rx_peer_frag_setup(), as decrementing the tid before cleanup in loop will take care of this. Compile tested only. Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250721061749.886732-1-quic_sarishar@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-15wifi: ath12k: fix endianness handling while accessing wmi service bitTamizh Chelvam Raja1-5/+7
[ Upstream commit 8f1a078842d4af4877fb686f3907788024d0d1b7 ] Currently there is no endian conversion in ath12k_wmi_tlv_services_parser() so the service bit parsing will be incorrect on a big endian platform and to fix this by using appropriate endian conversion. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00217-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: 342527f35338 ("wifi: ath12k: Add support to parse new WMI event for 6 GHz regulatory") Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250717173539.2523396-2-tamizh.raja@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-15wifi: ath11k: fix sleeping-in-atomic in ath11k_mac_op_set_bitrate_mask()Baochen Qiang1-6/+6
[ Upstream commit 65c12b104cb942d588a1a093acc4537fb3d3b129 ] ath11k_mac_disable_peer_fixed_rate() is passed as the iterator to ieee80211_iterate_stations_atomic(). Note in this case the iterator is required to be atomic, however ath11k_mac_disable_peer_fixed_rate() does not follow it as it might sleep. Consequently below warning is seen: BUG: sleeping function called from invalid context at wmi.c:304 Call Trace: <TASK> dump_stack_lvl __might_resched.cold ath11k_wmi_cmd_send ath11k_wmi_set_peer_param ath11k_mac_disable_peer_fixed_rate ieee80211_iterate_stations_atomic ath11k_mac_op_set_bitrate_mask.cold Change to ieee80211_iterate_stations_mtx() to fix this issue. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://patch.msgid.link/20250603-ath11k-use-non-atomic-iterator-v1-1-d75762068d56@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-15wifi: ath11k: clear initialized flag for deinit-ed srng listsSergey Senozhatsky1-0/+4
[ Upstream commit a5b46aa7cf5f05c213316a018e49a8e086efd98e ] In a number of cases we see kernel panics on resume due to ath11k kernel page fault, which happens under the following circumstances: 1) First ath11k_hal_dump_srng_stats() call Last interrupt received for each group: ath11k_pci 0000:01:00.0: group_id 0 22511ms before ath11k_pci 0000:01:00.0: group_id 1 14440788ms before [..] ath11k_pci 0000:01:00.0: failed to receive control response completion, polling.. ath11k_pci 0000:01:00.0: Service connect timeout ath11k_pci 0000:01:00.0: failed to connect to HTT: -110 ath11k_pci 0000:01:00.0: failed to start core: -110 ath11k_pci 0000:01:00.0: firmware crashed: MHI_CB_EE_RDDM ath11k_pci 0000:01:00.0: already resetting count 2 ath11k_pci 0000:01:00.0: failed to wait wlan mode request (mode 4): -110 ath11k_pci 0000:01:00.0: qmi failed to send wlan mode off: -110 ath11k_pci 0000:01:00.0: failed to reconfigure driver on crash recovery [..] 2) At this point reconfiguration fails (we have 2 resets) and ath11k_core_reconfigure_on_crash() calls ath11k_hal_srng_deinit() which destroys srng lists. However, it does not reset per-list ->initialized flag. 3) Second ath11k_hal_dump_srng_stats() call sees stale ->initialized flag and attempts to dump srng stats: Last interrupt received for each group: ath11k_pci 0000:01:00.0: group_id 0 66785ms before ath11k_pci 0000:01:00.0: group_id 1 14485062ms before ath11k_pci 0000:01:00.0: group_id 2 14485062ms before ath11k_pci 0000:01:00.0: group_id 3 14485062ms before ath11k_pci 0000:01:00.0: group_id 4 14780845ms before ath11k_pci 0000:01:00.0: group_id 5 14780845ms before ath11k_pci 0000:01:00.0: group_id 6 14485062ms before ath11k_pci 0000:01:00.0: group_id 7 66814ms before ath11k_pci 0000:01:00.0: group_id 8 68997ms before ath11k_pci 0000:01:00.0: group_id 9 67588ms before ath11k_pci 0000:01:00.0: group_id 10 69511ms before BUG: unable to handle page fault for address: ffffa007404eb010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 100000067 P4D 100000067 PUD 10022d067 PMD 100b01067 PTE 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:ath11k_hal_dump_srng_stats+0x2b4/0x3b0 [ath11k] Call Trace: <TASK> ? __die_body+0xae/0xb0 ? page_fault_oops+0x381/0x3e0 ? exc_page_fault+0x69/0xa0 ? asm_exc_page_fault+0x22/0x30 ? ath11k_hal_dump_srng_stats+0x2b4/0x3b0 [ath11k (HASH:6cea 4)] ath11k_qmi_driver_event_work+0xbd/0x1050 [ath11k (HASH:6cea 4)] worker_thread+0x389/0x930 kthread+0x149/0x170 Clear per-list ->initialized flag in ath11k_hal_srng_deinit(). Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Fixes: 5118935b1bc2 ("ath11k: dump SRNG stats during FW assert") Link: https://patch.msgid.link/20250612084551.702803-1-senozhatsky@chromium.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-04-29 18:48:52 +0300