summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)AuthorFilesLines
2021-07-20ath10k: Fix an error code in ath10k_add_interface()Yang Li1-0/+1
[ Upstream commit e9ca70c735ce66fc6a0e02c8b6958434f74ef8de ] When the code execute this if statement, the value of ret is 0. However, we can see from the ath10k_warn() log that the value of ret should be -EINVAL. Clean up smatch warning: drivers/net/wireless/ath/ath10k/mac.c:5596 ath10k_add_interface() warn: missing error code 'ret' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: ccec9038c721 ("ath10k: enable raw encap mode and software crypto engine") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1621939577-62218-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20wireless: carl9170: fix LEDS build errors & warningsRandy Dunlap1-5/+3
[ Upstream commit 272fdc0c4542fad173b44965be02a16d6db95499 ] kernel test robot reports over 200 build errors and warnings that are due to this Kconfig problem when CARL9170=m, MAC80211=y, and LEDS_CLASS=m. WARNING: unmet direct dependencies detected for MAC80211_LEDS Depends on [n]: NET [=y] && WIRELESS [=y] && MAC80211 [=y] && (LEDS_CLASS [=m]=y || LEDS_CLASS [=m]=MAC80211 [=y]) Selected by [m]: - CARL9170_LEDS [=y] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_ATH [=y] && CARL9170 [=m] CARL9170_LEDS selects MAC80211_LEDS even though its kconfig dependencies are not met. This happens because 'select' does not follow any Kconfig dependency chains. Fix this by making CARL9170_LEDS depend on MAC80211_LEDS, where the latter supplies any needed dependencies on LEDS_CLASS. Fixes: 1d7e1e6b1b8ed ("carl9170: Makefile, Kconfig files and MAINTAINERS") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: linux-wireless@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Suggested-by: Christian Lamparter <chunkeey@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210530031134.23274-1-rdunlap@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20ath9k: Fix kernel NULL pointer dereference during ath_reset_internal()Pali Rohár1-0/+5
commit fb312ac5ccb007e843f982b38d4d6886ba4b32f2 upstream. I got this crash more times during debugging of PCIe controller and crash happens somehow at the time when PCIe kernel code started link retraining (as part of ASPM code) when at the same time PCIe link went down and ath9k probably executed hw reset procedure. Currently I'm not able to reproduce this issue as it looks like to be some race condition between link training, ASPM, link down and reset path. And as always, race conditions which depends on more input parameters are hard to reproduce as it depends on precise timings. But it is clear that pointers are zero in this case and should be properly filled as same code pattern is used in ath9k_stop() function. Anyway I was able to reproduce this crash by manually triggering ath reset worker prior putting card up. I created simple patch to export reset functionality via debugfs and use it to "simulate" of triggering reset. s proved that NULL-pointer dereference issue is there. Function ath9k_hw_reset() is dereferencing chan structure pointer, so it needs to be non-NULL pointer. Function ath9k_stop() already contains code which sets ah->curchan to valid non-NULL pointer prior calling ath9k_hw_reset() function. Add same code pattern also into ath_reset_internal() function to prevent kernel NULL pointer dereference in ath9k_hw_reset() function. This change fixes kernel NULL pointer dereference in ath9k_hw_reset() which is caused by calling ath9k_hw_reset() from ath_reset_internal() with NULL chan structure. [ 45.334305] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 45.344417] Mem abort info: [ 45.347301] ESR = 0x96000005 [ 45.350448] EC = 0x25: DABT (current EL), IL = 32 bits [ 45.356166] SET = 0, FnV = 0 [ 45.359350] EA = 0, S1PTW = 0 [ 45.362596] Data abort info: [ 45.365756] ISV = 0, ISS = 0x00000005 [ 45.369735] CM = 0, WnR = 0 [ 45.372814] user pgtable: 4k pages, 39-bit VAs, pgdp=000000000685d000 [ 45.379663] [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 45.388856] Internal error: Oops: 96000005 [#1] SMP [ 45.393897] Modules linked in: ath9k ath9k_common ath9k_hw [ 45.399574] CPU: 1 PID: 309 Comm: kworker/u4:2 Not tainted 5.12.0-rc2-dirty #785 [ 45.414746] Workqueue: phy0 ath_reset_work [ath9k] [ 45.419713] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 45.425910] pc : ath9k_hw_reset+0xc4/0x1c48 [ath9k_hw] [ 45.431234] lr : ath9k_hw_reset+0xc0/0x1c48 [ath9k_hw] [ 45.436548] sp : ffffffc0118dbca0 [ 45.439961] x29: ffffffc0118dbca0 x28: 0000000000000000 [ 45.445442] x27: ffffff800dee4080 x26: 0000000000000000 [ 45.450923] x25: ffffff800df9b9d8 x24: 0000000000000000 [ 45.456404] x23: ffffffc0115f6000 x22: ffffffc008d0d408 [ 45.461885] x21: ffffff800dee5080 x20: ffffff800df9b9d8 [ 45.467366] x19: 0000000000000000 x18: 0000000000000000 [ 45.472846] x17: 0000000000000000 x16: 0000000000000000 [ 45.478326] x15: 0000000000000010 x14: ffffffffffffffff [ 45.483807] x13: ffffffc0918db94f x12: ffffffc011498720 [ 45.489289] x11: 0000000000000003 x10: ffffffc0114806e0 [ 45.494770] x9 : ffffffc01014b2ec x8 : 0000000000017fe8 [ 45.500251] x7 : c0000000ffffefff x6 : 0000000000000001 [ 45.505733] x5 : 0000000000000000 x4 : 0000000000000000 [ 45.511213] x3 : 0000000000000000 x2 : ffffff801fece870 [ 45.516693] x1 : ffffffc00eded000 x0 : 000000000000003f [ 45.522174] Call trace: [ 45.524695] ath9k_hw_reset+0xc4/0x1c48 [ath9k_hw] [ 45.529653] ath_reset_internal+0x1a8/0x2b8 [ath9k] [ 45.534696] ath_reset_work+0x2c/0x40 [ath9k] [ 45.539198] process_one_work+0x210/0x480 [ 45.543339] worker_thread+0x5c/0x510 [ 45.547115] kthread+0x12c/0x130 [ 45.550445] ret_from_fork+0x10/0x1c [ 45.554138] Code: 910922c2 9117e021 95ff0398 b4000294 (b9400a61) [ 45.560430] ---[ end trace 566410ba90b50e8b ]--- [ 45.565193] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 45.572282] SMP: stopping secondary CPUs [ 45.576331] Kernel Offset: disabled [ 45.579924] CPU features: 0x00040002,0000200c [ 45.584416] Memory Limit: none [ 45.587564] Rebooting in 3 seconds.. Signed-off-by: Pali Rohár <pali@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210402122653.24014-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22ath9k: Fix error check in ath9k_hw_read_revisions() for PCI devicesToke Høiland-Jørgensen2-2/+2
[ Upstream commit 7dd9a40fd6e0d0f1fd8e1931c007e080801dfdce ] When the error check in ath9k_hw_read_revisions() was added, it checked for -EIO which is what ath9k_regread() in the ath9k_htc driver uses. However, for plain ath9k, the register read function uses ioread32(), which just returns -1 on error. So if such a read fails, it still gets passed through and ends up as a weird mac revision in the log output. Fix this by changing ath9k_regread() to return -1 on error like ioread32() does, and fix the error check to look for that instead of -EIO. Fixes: 2f90c7e5d094 ("ath9k: Check for errors when reading SREV register") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210326180819.142480-1-toke@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-17ath9k: fix transmitting to stations in dynamic SMPS modeFelix Fietkau2-1/+8
commit 3b9ea7206d7e1fdd7419cbd10badd3b2c80d04b4 upstream. When transmitting to a receiver in dynamic SMPS mode, all transmissions that use multiple spatial streams need to be sent using CTS-to-self or RTS/CTS to give the receiver's extra chains some time to wake up. This fixes the tx rate getting stuck at <= MCS7 for some clients, especially Intel ones, which make aggressive use of SMPS. Cc: stable@vger.kernel.org Reported-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210214184911.96702-1-nbd@nbd.name Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07ath10k: fix wmi mgmt tx queue full due to race conditionMiaoqing Pan1-11/+4
[ Upstream commit b55379e343a3472c35f4a1245906db5158cab453 ] Failed to transmit wmi management frames: [84977.840894] ath10k_snoc a000000.wifi: wmi mgmt tx queue is full [84977.840913] ath10k_snoc a000000.wifi: failed to transmit packet, dropping: -28 [84977.840924] ath10k_snoc a000000.wifi: failed to submit frame: -28 [84977.840932] ath10k_snoc a000000.wifi: failed to transmit frame: -28 This issue is caused by race condition between skb_dequeue and __skb_queue_tail. The queue of ‘wmi_mgmt_tx_queue’ is protected by a different lock: ar->data_lock vs list->lock, the result is no protection. So when ath10k_mgmt_over_wmi_tx_work() and ath10k_mac_tx_wmi_mgmt() running concurrently on different CPUs, there appear to be a rare corner cases when the queue length is 1, CPUx (skb_deuque) CPUy (__skb_queue_tail) next=list prev=list struct sk_buff *skb = skb_peek(list); WRITE_ONCE(newsk->next, next); WRITE_ONCE(list->qlen, list->qlen - 1);WRITE_ONCE(newsk->prev, prev); next = skb->next; WRITE_ONCE(next->prev, newsk); prev = skb->prev; WRITE_ONCE(prev->next, newsk); skb->next = skb->prev = NULL; list->qlen++; WRITE_ONCE(next->prev, prev); WRITE_ONCE(prev->next, next); If the instruction ‘next = skb->next’ is executed before ‘WRITE_ONCE(prev->next, newsk)’, newsk will be lost, as CPUx get the old ‘next’ pointer, but the length is still added by one. The final result is the length of the queue will reach the maximum value but the queue is empty. So remove ar->data_lock, and use 'skb_queue_tail' instead of '__skb_queue_tail' to prevent the potential race condition. Also switch to use skb_queue_len_lockless, in case we queue a few SKBs simultaneously. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1.c2-00033-QCAHLSWMTPLZ-1 Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608618887-8857-1-git-send-email-miaoqing@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-17wil6210: select CONFIG_CRC32Arnd Bergmann1-0/+1
commit e186620d7bf11b274b985b839c38266d7918cc05 upstream. Without crc32, the driver fails to link: arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o: in function `wil_fw_verify': fw.c:(.text+0x74c): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o:fw.c:(.text+0x758): more undefined references to `crc32_le' follow Fixes: 151a9706503f ("wil6210: firmware download") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18ath9k_htc: Use appropriate rs_datalen typeMasashi Honma1-1/+1
commit 5024f21c159f8c1668f581fff37140741c0b1ba9 upstream. kernel test robot says: drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse: warning: incorrect type in assignment (different base types) drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse: expected restricted __be16 [usertype] rs_datalen drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse: got unsigned short [usertype] drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:988:13: sparse: warning: restricted __be16 degrades to integer drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:1001:13: sparse: warning: restricted __be16 degrades to integer Indeed rs_datalen has host byte order, so modify it's own type. Reported-by: kernel test robot <lkp@intel.com> Fixes: cd486e627e67 ("ath9k_htc: Discard undersized packets") Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200808233258.4596-1-masashi.honma@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10ath10k: fix VHT NSS calculation when STBC is enabledSathishkumar Muruganandam1-1/+7
[ Upstream commit 99f41b8e43b8b4b31262adb8ac3e69088fff1289 ] When STBC is enabled, NSTS_SU value need to be accounted for VHT NSS calculation for SU case. Without this fix, 1SS + STBC enabled case was reported wrongly as 2SS in radiotap header on monitor mode capture. Tested-on: QCA9984 10.4-3.10-00047 Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597392971-3897-1-git-send-email-murugana@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29ath10k: check idx validity in __ath10k_htt_rx_ring_fill_n()Zekun Shen1-0/+8
[ Upstream commit bad60b8d1a7194df38fd7fe4b22f3f4dcf775099 ] The idx in __ath10k_htt_rx_ring_fill_n function lives in consistent dma region writable by the device. Malfunctional or malicious device could manipulate such idx to have a OOB write. Either by htt->rx_ring.netbufs_ring[idx] = skb; or by ath10k_htt_set_paddrs_ring(htt, paddr, idx); The idx can also be negative as it's signed, giving a large memory space to write to. It's possibly exploitable by corruptting a legit pointer with a skb pointer. And then fill skb with payload as rougue object. Part of the log here. Sometimes it appears as UAF when writing to a freed memory by chance. [ 15.594376] BUG: unable to handle page fault for address: ffff887f5c1804f0 [ 15.595483] #PF: supervisor write access in kernel mode [ 15.596250] #PF: error_code(0x0002) - not-present page [ 15.597013] PGD 0 P4D 0 [ 15.597395] Oops: 0002 [#1] SMP KASAN PTI [ 15.597967] CPU: 0 PID: 82 Comm: kworker/u2:2 Not tainted 5.6.0 #69 [ 15.598843] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 15.600438] Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core] [ 15.601389] RIP: 0010:__ath10k_htt_rx_ring_fill_n (linux/drivers/net/wireless/ath/ath10k/htt_rx.c:173) ath10k_core Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200623221105.3486-1-bruceshenzk@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29ath9k: hif_usb: fix race condition between usb_get_urb() and ↵Brooke Basile1-0/+19
usb_kill_anchored_urbs() [ Upstream commit 03fb92a432ea5abe5909bca1455b7e44a9380480 ] Calls to usb_kill_anchored_urbs() after usb_kill_urb() on multiprocessor systems create a race condition in which usb_kill_anchored_urbs() deallocates the URB before the completer callback is called in usb_kill_urb(), resulting in a use-after-free. To fix this, add proper lock protection to usb_kill_urb() calls that can possibly run concurrently with usb_kill_anchored_urbs(). Reported-by: syzbot+89bd486af9427a9fc605@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=cabffad18eb74197f84871802fd2c5117b61febf Signed-off-by: Brooke Basile <brookebasile@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200911071427.32354-1-brookebasile@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29ath6kl: wmi: prevent a shift wrapping bug in ath6kl_wmi_delete_pstream_cmd()Dan Carpenter1-0/+5
[ Upstream commit 6a950755cec1a90ddaaff3e4acb5333617441c32 ] The "tsid" is a user controlled u8 which comes from debugfs. Values more than 15 are invalid because "active_tsids" is a 16 bit variable. If the value of "tsid" is more than 31 then that leads to a shift wrapping bug. Fixes: 8fffd9e5ec9e ("ath6kl: Implement support for QOS-enable and QOS-disable from userspace") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200918142732.GA909725@mwanda Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29wcn36xx: Fix reported 802.11n rx_highest rate wcn3660/wcn3680Bryan O'Donoghue1-1/+1
[ Upstream commit 3b9fb6791e7113679b1eb472e6ce1659e80f5797 ] Qualcomm's document "80-WL007-1 Rev. J" states that the highest rx rate for the WCN3660 and WCN3680 on MCS 7 is 150 Mbps not the 72 Mbps stated here. This patch fixes the data-rate declared in the 5GHz table. Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200802004824.1307124-1-bryan.odonoghue@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29ath9k: Fix potential out of bounds in ath9k_htc_txcompletion_cb()Dan Carpenter1-0/+2
[ Upstream commit 2705cd7558e718a7240c64eb0afb2edad5f8c190 ] The value of "htc_hdr->endpoint_id" comes from skb->data so Smatch marks it as untrusted so we have to check it before using it as an array offset. This is similar to a bug that syzkaller found in commit e4ff08a4d727 ("ath9k: Fix use-after-free Write in ath9k_htc_rx_msg") so it is probably a real issue. Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200813141253.GA457408@mwanda Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29ath6kl: prevent potential array overflow in ath6kl_add_new_sta()Dan Carpenter1-0/+3
[ Upstream commit 54f9ab7b870934b70e5a21786d951fbcf663970f ] The value for "aid" comes from skb->data so Smatch marks it as untrusted. If it's invalid then it can result in an out of bounds array access in ath6kl_add_new_sta(). Fixes: 572e27c00c9d ("ath6kl: Fix AP mode connect event parsing and TIM updates") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200813141315.GB457408@mwanda Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01ar5523: Add USB ID of SMCWUSBT-G2 wireless adapterMert Dirik1-0/+2
[ Upstream commit 5b362498a79631f283578b64bf6f4d15ed4cc19a ] Add the required USB ID for running SMCWUSBT-G2 wireless adapter (SMC "EZ Connect g"). This device uses ar5523 chipset and requires firmware to be loaded. Even though pid of the device is 4507, this patch adds it as 4506 so that AR5523_DEVICE_UG macro can set the AR5523_FLAG_PRE_FIRMWARE flag for pid 4507. Signed-off-by: Mert Dirik <mertdirik@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03Revert "ath10k: fix DMA related firmware crashes on multiple devices"Zhi Chen1-1/+1
[ Upstream commit a1769bb68a850508a492e3674ab1e5e479b11254 ] This reverts commit 76d164f582150fd0259ec0fcbc485470bcd8033e. PCIe hung issue was observed on multiple platforms. The issue was reproduced when DUT was configured as AP and associated with 50+ STAs. For QCA9984/QCA9888, the DMA_BURST_SIZE register controls the AXI burst size of the RD/WR access to the HOST MEM. 0 - No split , RAW read/write transfer size from MAC is put out on bus as burst length 1 - Split at 256 byte boundary 2,3 - Reserved With PCIe protocol analyzer, we can see DMA Read crossing 4KB boundary when issue happened. It broke PCIe spec and caused PCIe stuck. So revert the default value from 0 to 1. Tested: IPQ8064 + QCA9984 with firmware 10.4-3.10-00047 QCS404 + QCA9984 with firmware 10.4-3.9.0.2--00044 Synaptics AS370 + QCA9888 with firmware 10.4-3.9.0.2--00040 Signed-off-by: Zhi Chen <zhichen@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21ath9k: release allocated buffer if timed outNavid Emamdoost1-0/+1
[ Upstream commit 728c1e2a05e4b5fc52fab3421dce772a806612a2 ] In ath9k_wmi_cmd, the allocated network buffer needs to be released if timeout happens. Otherwise memory will be leaked. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21ath9k_htc: release allocated buffer if timed outNavid Emamdoost1-0/+3
[ Upstream commit 853acf7caf10b828102d92d05b5c101666a6142b ] In htc_config_pipe_credits, htc_setup_complete, and htc_connect_service if time out happens, the allocated buffer needs to be released. Otherwise there will be memory leak. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-31ath9k: Fix regression with Atheros 9271Mark O'Donovan1-1/+3
commit 92f53e2fda8bb9a559ad61d57bfb397ce67ed0ab upstream. This fix allows ath9k_htc modules to connect to WLAN once again. Fixes: 2bbcaaee1fcb ("ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208251 Signed-off-by: Mark O'Donovan <shiftee@posteo.net> Reported-by: Roman Mamedov <rm@romanrm.net> Tested-by: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200711043324.8079-1-shiftee@posteo.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-31ath9k: Fix general protection fault in ath9k_hif_usb_rx_cbQiujun Huang2-11/+42
commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream. In ath9k_hif_usb_rx_cb interface number is assumed to be 0. usb_ifnum_to_if(urb->dev, 0) But it isn't always true. The case reported by syzbot: https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com usb 2-1: new high-speed USB device number 2 using dummy_hcd usb 2-1: config 1 has an invalid interface number: 2 but max is 0 usb 2-1: config 1 has no interface number 0 usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice= 1.08 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 general protection fault, probably for non-canonical address 0xdffffc0000000015: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0 Call Trace __usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 __do_softirq+0x21e/0x950 kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x178/0x1a0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:546 [inline] smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829 Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com Cc: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22Revert "ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb"Greg Kroah-Hartman2-42/+11
This reverts commit 90ecba9f1041f436ed2b35ba7a970c7cc5d0df23 which is commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream. It is being reverted upstream, just hasn't made it there yet and is causing lots of problems. Reported-by: Hans de Goede <hdegoede@redhat.com> Cc: Qiujun Huang <hqjagain@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-20carl9170: remove P2P_GO supportChristian Lamparter2-20/+5
commit b14fba7ebd04082f7767a11daea7f12f3593de22 upstream. This patch follows up on a bug-report by Frank Schäfer that discovered P2P GO wasn't working with wpa_supplicant. This patch removes part of the broken P2P GO support but keeps the vif switchover code in place. Cc: <stable@vger.kernel.org> Link: <https://lkml.kernel.org/r/3a9d86b6-744f-e670-8792-9167257edef8@googlemail.com> Reported-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200425092811.9494-1-chunkeey@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-20ath9k: Fix general protection fault in ath9k_hif_usb_rx_cbQiujun Huang2-11/+42
commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream. In ath9k_hif_usb_rx_cb interface number is assumed to be 0. usb_ifnum_to_if(urb->dev, 0) But it isn't always true. The case reported by syzbot: https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com usb 2-1: new high-speed USB device number 2 using dummy_hcd usb 2-1: config 1 has an invalid interface number: 2 but max is 0 usb 2-1: config 1 has no interface number 0 usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice= 1.08 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 general protection fault, probably for non-canonical address 0xdffffc0000000015: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0 Call Trace __usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 __do_softirq+0x21e/0x950 kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x178/0x1a0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:546 [inline] smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829 Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-20ath9x: Fix stack-out-of-bounds Write in ath9k_hif_usb_rx_cbQiujun Huang1-0/+5
commit 19d6c375d671ce9949a864fb9a03e19f5487b4d3 upstream. Add barrier to accessing the stack array skb_pool. The case reported by syzbot: https://lore.kernel.org/linux-usb/0000000000003d7c1505a2168418@google.com BUG: KASAN: stack-out-of-bounds in ath9k_hif_usb_rx_stream drivers/net/wireless/ath/ath9k/hif_usb.c:626 [inline] BUG: KASAN: stack-out-of-bounds in ath9k_hif_usb_rx_cb+0xdf6/0xf70 drivers/net/wireless/ath/ath9k/hif_usb.c:666 Write of size 8 at addr ffff8881db309a28 by task swapper/1/0 Call Trace: ath9k_hif_usb_rx_stream drivers/net/wireless/ath/ath9k/hif_usb.c:626 [inline] ath9k_hif_usb_rx_cb+0xdf6/0xf70 drivers/net/wireless/ath/ath9k/hif_usb.c:666 __usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1648 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1713 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 Reported-and-tested-by: syzbot+d403396d4df67ad0bd5f@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200404041838.10426-5-hqjagain@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-20ath9k: Fix use-after-free Write in ath9k_htc_rx_msgQiujun Huang1-0/+3
commit e4ff08a4d727146bb6717a39a8d399d834654345 upstream. Write out of slab bounds. We should check epid. The case reported by syzbot: https://lore.kernel.org/linux-usb/0000000000006ac55b05a1c05d72@google.com BUG: KASAN: use-after-free in htc_process_conn_rsp drivers/net/wireless/ath/ath9k/htc_hst.c:131 [inline] BUG: KASAN: use-after-free in ath9k_htc_rx_msg+0xa25/0xaf0 drivers/net/wireless/ath/ath9k/htc_hst.c:443 Write of size 2 at addr ffff8881cea291f0 by task swapper/1/0 Call Trace: htc_process_conn_rsp drivers/net/wireless/ath/ath9k/htc_hst.c:131 [inline] ath9k_htc_rx_msg+0xa25/0xaf0 drivers/net/wireless/ath/ath9k/htc_hst.c:443 ath9k_hif_usb_reg_in_cb+0x1ba/0x630 drivers/net/wireless/ath/ath9k/hif_usb.c:718 __usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 Reported-and-tested-by: syzbot+b1c61e5f11be5782f192@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200404041838.10426-4-hqjagain@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-20ath9k: Fix use-after-free Read in ath9k_wmi_ctrl_rxQiujun Huang5-7/+17
commit abeaa85054ff8cfe8b99aafc5c70ea067e5d0908 upstream. Free wmi later after cmd urb has been killed, as urb cb will access wmi. the case reported by syzbot: https://lore.kernel.org/linux-usb/0000000000000002fc05a1d61a68@google.com BUG: KASAN: use-after-free in ath9k_wmi_ctrl_rx+0x416/0x500 drivers/net/wireless/ath/ath9k/wmi.c:215 Read of size 1 at addr ffff8881cef1417c by task swapper/1/0 Call Trace: <IRQ> ath9k_wmi_ctrl_rx+0x416/0x500 drivers/net/wireless/ath/ath9k/wmi.c:215 ath9k_htc_rx_msg+0x2da/0xaf0 drivers/net/wireless/ath/ath9k/htc_hst.c:459 ath9k_hif_usb_reg_in_cb+0x1ba/0x630 drivers/net/wireless/ath/ath9k/hif_usb.c:718 __usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 Reported-and-tested-by: syzbot+5d338854440137ea0fef@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200404041838.10426-3-hqjagain@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-20ath9k_htc: Silence undersized packet warningsMasashi Honma1-3/+3
[ Upstream commit 450edd2805982d14ed79733a82927d2857b27cac ] Some devices like TP-Link TL-WN722N produces this kind of messages frequently. kernel: ath: phy0: Short RX data len, dropping (dlen: 4) This warning is useful for developers to recognize that the device (Wi-Fi dongle or USB hub etc) is noisy but not for general users. So this patch make this warning to debug message. Reported-By: Denis <pro.denis@protonmail.com> Ref: https://bugzilla.kernel.org/show_bug.cgi?id=207539 Fixes: cd486e627e67 ("ath9k_htc: Discard undersized packets") Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200504214443.4485-1-masashi.honma@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-10ath9k_htc: check for underflow in ath9k_htc_rx_msg()Dan Carpenter1-1/+1
commit 3a318426e09a9c9266fe6440842e11238f640a20 upstream. We check for overflow here, but we don't check for underflow so it causes a static checker warning. Fixes: fb9987d0f748 ('ath9k_htc: Support for AR9271 chipset.') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-10ath10k: free cached fw bin contents when get board id failsRaja Mani1-1/+1
commit b9c191be3fbdd9d78be11160dd7a3ddb9fdc6d42 upstream. ath10k_core_probe_fw() simply returns error without freeing cached firmware file content when get board id operation fails. Free cached fw bin data in failure case to avoid memory leak. Fixes: db0984e51a18 ("ath10k: select board data based on BMI chip id and board id") Signed-off-by: Raja Mani <rmani@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24wil6210: rate limit wil_rx_refill errorDedy Lansky1-2/+2
[ Upstream commit 3d6b72729cc2933906de8d2c602ae05e920b2122 ] wil_err inside wil_rx_refill can flood the log buffer. Replace it with wil_err_ratelimited. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24wil6210: fix temperature debugfsDedy Lansky1-3/+4
[ Upstream commit 6d9eb7ebae3d7e951bc0999235ae7028eb4cae4f ] For negative temperatures, "temp" debugfs is showing wrong values. Use signed types so proper calculations is done for sub zero temperatures. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24wil6210: increase firmware ready timeoutHamad Kadmany1-1/+1
[ Upstream commit 6ccae584014ef7074359eb4151086beef66ecfa9 ] Firmware ready event may take longer than current timeout in some scenarios, for example with multiple RFs connected where each requires an initial calibration. Increase the timeout to support these scenarios. Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24ath9k: Handle txpower changes even when TPC is disabledRemi Pommarel1-0/+3
commit 968ae2caad0782db5dbbabb560d3cdefd2945d38 upstream. When TPC is disabled IEEE80211_CONF_CHANGE_POWER event can be handled to reconfigure HW's maximum txpower. This fixes 0dBm txpower setting when user attaches to an interface for the first time with the following scenario: ieee80211_do_open() ath9k_add_interface() ath9k_set_txpower() /* Set TX power with not yet initialized sc->hw->conf.power_level */ ieee80211_hw_config() /* Iniatilize sc->hw->conf.power_level and raise IEEE80211_CONF_CHANGE_POWER */ ath9k_config() /* IEEE80211_CONF_CHANGE_POWER is ignored */ This issue can be reproduced with the following: $ modprobe -r ath9k $ modprobe ath9k $ wpa_supplicant -i wlan0 -c /tmp/wpa.conf & $ iw dev /* Here TX power is either 0 or 3 depending on RF chain */ $ killall wpa_supplicant $ iw dev /* TX power goes back to calibrated value and subsequent calls will be fine */ Fixes: 283dd11994cde ("ath9k: add per-vif TX power capability") Cc: stable@vger.kernel.org Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-05ath9k: fix storage endpoint lookupJohan Hovold1-1/+1
commit 0ef332951e856efa89507cdd13ba8f4fb8d4db12 upstream. Make sure to use the current alternate setting when verifying the storage interface descriptors to avoid submitting an URB to an invalid endpoint. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 36bcce430657 ("ath9k_htc: Handle storage devices") Cc: stable <stable@vger.kernel.org> # 2.6.39 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29ath9k: dynack: fix possible deadlock in ath_dynack_node_{de}initLorenzo Bianconi1-4/+4
[ Upstream commit e1aa1a1db3b01c9890e82cf065cee99962ba1ed9 ] Fix following lockdep warning disabling bh in ath_dynack_node_init/ath_dynack_node_deinit [ 75.955878] -------------------------------- [ 75.955880] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 75.955884] swapper/0/0 [HC0[0]:SC1[3]:HE1:SE0] takes: [ 75.955888] 00000000792a7ee0 (&(&da->qlock)->rlock){+.?.}, at: ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.955905] {SOFTIRQ-ON-W} state was registered at: [ 75.955912] lock_acquire+0x9a/0x160 [ 75.955917] _raw_spin_lock+0x2c/0x70 [ 75.955927] ath_dynack_node_init+0x2a/0x60 [ath9k_hw] [ 75.955934] ath9k_sta_state+0xec/0x160 [ath9k] [ 75.955976] drv_sta_state+0xb2/0x740 [mac80211] [ 75.956008] sta_info_insert_finish+0x21a/0x420 [mac80211] [ 75.956039] sta_info_insert_rcu+0x12b/0x2c0 [mac80211] [ 75.956069] sta_info_insert+0x7/0x70 [mac80211] [ 75.956093] ieee80211_prep_connection+0x42e/0x730 [mac80211] [ 75.956120] ieee80211_mgd_auth.cold+0xb9/0x15c [mac80211] [ 75.956152] cfg80211_mlme_auth+0x143/0x350 [cfg80211] [ 75.956169] nl80211_authenticate+0x25e/0x2b0 [cfg80211] [ 75.956172] genl_family_rcv_msg+0x198/0x400 [ 75.956174] genl_rcv_msg+0x42/0x90 [ 75.956176] netlink_rcv_skb+0x35/0xf0 [ 75.956178] genl_rcv+0x1f/0x30 [ 75.956180] netlink_unicast+0x154/0x200 [ 75.956182] netlink_sendmsg+0x1bf/0x3d0 [ 75.956186] ___sys_sendmsg+0x2c2/0x2f0 [ 75.956187] __sys_sendmsg+0x44/0x80 [ 75.956190] do_syscall_64+0x55/0x1a0 [ 75.956192] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 75.956194] irq event stamp: 2357092 [ 75.956196] hardirqs last enabled at (2357092): [<ffffffff818c62de>] _raw_spin_unlock_irqrestore+0x3e/0x50 [ 75.956199] hardirqs last disabled at (2357091): [<ffffffff818c60b1>] _raw_spin_lock_irqsave+0x11/0x80 [ 75.956202] softirqs last enabled at (2357072): [<ffffffff8106dc09>] irq_enter+0x59/0x60 [ 75.956204] softirqs last disabled at (2357073): [<ffffffff8106dcbe>] irq_exit+0xae/0xc0 [ 75.956206] other info that might help us debug this: [ 75.956207] Possible unsafe locking scenario: [ 75.956208] CPU0 [ 75.956209] ---- [ 75.956210] lock(&(&da->qlock)->rlock); [ 75.956213] <Interrupt> [ 75.956214] lock(&(&da->qlock)->rlock); [ 75.956216] *** DEADLOCK *** [ 75.956217] 1 lock held by swapper/0/0: [ 75.956219] #0: 000000003bb5675c (&(&sc->sc_pcu_lock)->rlock){+.-.}, at: ath9k_tasklet+0x55/0x240 [ath9k] [ 75.956225] stack backtrace: [ 75.956228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc1-wdn+ #13 [ 75.956229] Hardware name: Dell Inc. Studio XPS 1340/0K183D, BIOS A11 09/08/2009 [ 75.956231] Call Trace: [ 75.956233] <IRQ> [ 75.956236] dump_stack+0x67/0x90 [ 75.956239] mark_lock+0x4c1/0x640 [ 75.956242] ? check_usage_backwards+0x130/0x130 [ 75.956245] ? sched_clock_local+0x12/0x80 [ 75.956247] __lock_acquire+0x484/0x7a0 [ 75.956250] ? __lock_acquire+0x3b9/0x7a0 [ 75.956252] lock_acquire+0x9a/0x160 [ 75.956259] ? ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.956262] _raw_spin_lock_bh+0x34/0x80 [ 75.956268] ? ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.956275] ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.956280] ath_rx_tasklet+0xd09/0xe90 [ath9k] [ 75.956286] ath9k_tasklet+0x102/0x240 [ath9k] [ 75.956288] tasklet_action_common.isra.0+0x6d/0x170 [ 75.956291] __do_softirq+0xcc/0x425 [ 75.956294] irq_exit+0xae/0xc0 [ 75.956296] do_IRQ+0x8a/0x110 [ 75.956298] common_interrupt+0xf/0xf [ 75.956300] </IRQ> [ 75.956303] RIP: 0010:cpuidle_enter_state+0xb2/0x400 [ 75.956308] RSP: 0018:ffffffff82203e70 EFLAGS: 00000202 ORIG_RAX: ffffffffffffffd7 [ 75.956310] RAX: ffffffff82219800 RBX: ffffffff822bd0a0 RCX: 0000000000000000 [ 75.956312] RDX: 0000000000000046 RSI: 0000000000000006 RDI: ffffffff82219800 [ 75.956314] RBP: ffff888155a01c00 R08: 00000011af51aabe R09: 0000000000000000 [ 75.956315] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 [ 75.956317] R13: 00000011af51aabe R14: 0000000000000003 R15: ffffffff82219800 [ 75.956321] cpuidle_enter+0x24/0x40 [ 75.956323] do_idle+0x1ac/0x220 [ 75.956326] cpu_startup_entry+0x14/0x20 [ 75.956329] start_kernel+0x482/0x489 [ 75.956332] secondary_startup_64+0xa4/0xb0 Fixes: c774d57fd47c ("ath9k: add dynamic ACK timeout estimation") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12ath9k_htc: Discard undersized packetsMasashi Honma1-4/+19
[ Upstream commit cd486e627e67ee9ab66914d36d3127ef057cc010 ] Sometimes the hardware will push small packets that trigger a WARN_ON in mac80211. Discard them early to avoid this issue. This patch ports 2 patches from ath9k to ath9k_htc. commit 3c0efb745a172bfe96459e20cbd37b0c945d5f8d "ath9k: discard undersized packets". commit df5c4150501ee7e86383be88f6490d970adcf157 "ath9k: correctly handle short radar pulses". [ 112.835889] ------------[ cut here ]------------ [ 112.835971] WARNING: CPU: 5 PID: 0 at net/mac80211/rx.c:804 ieee80211_rx_napi+0xaac/0xb40 [mac80211] [ 112.835973] Modules linked in: ath9k_htc ath9k_common ath9k_hw ath mac80211 cfg80211 libarc4 nouveau snd_hda_codec_hdmi intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_hda_codec video snd_hda_core ttm snd_hwdep drm_kms_helper snd_pcm crct10dif_pclmul snd_seq_midi drm snd_seq_midi_event crc32_pclmul snd_rawmidi ghash_clmulni_intel snd_seq aesni_intel aes_x86_64 crypto_simd cryptd snd_seq_device glue_helper snd_timer sch_fq_codel i2c_algo_bit fb_sys_fops snd input_leds syscopyarea sysfillrect sysimgblt intel_cstate mei_me intel_rapl_perf soundcore mxm_wmi lpc_ich mei kvm_intel kvm mac_hid irqbypass parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear e1000e ahci libahci wmi [ 112.836022] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.3.0-wt #1 [ 112.836023] Hardware name: MouseComputer Co.,Ltd. X99-S01/X99-S01, BIOS 1.0C-W7 04/01/2015 [ 112.836056] RIP: 0010:ieee80211_rx_napi+0xaac/0xb40 [mac80211] [ 112.836059] Code: 00 00 66 41 89 86 b0 00 00 00 e9 c8 fa ff ff 4c 89 b5 40 ff ff ff 49 89 c6 e9 c9 fa ff ff 48 c7 c7 e0 a2 a5 c0 e8 47 41 b0 e9 <0f> 0b 48 89 df e8 5a 94 2d ea e9 02 f9 ff ff 41 39 c1 44 89 85 60 [ 112.836060] RSP: 0018:ffffaa6180220da8 EFLAGS: 00010286 [ 112.836062] RAX: 0000000000000024 RBX: ffff909a20eeda00 RCX: 0000000000000000 [ 112.836064] RDX: 0000000000000000 RSI: ffff909a2f957448 RDI: ffff909a2f957448 [ 112.836065] RBP: ffffaa6180220e78 R08: 00000000000006e9 R09: 0000000000000004 [ 112.836066] R10: 000000000000000a R11: 0000000000000001 R12: 0000000000000000 [ 112.836068] R13: ffff909a261a47a0 R14: 0000000000000000 R15: 0000000000000004 [ 112.836070] FS: 0000000000000000(0000) GS:ffff909a2f940000(0000) knlGS:0000000000000000 [ 112.836071] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 112.836073] CR2: 00007f4e3ffffa08 CR3: 00000001afc0a006 CR4: 00000000001606e0 [ 112.836074] Call Trace: [ 112.836076] <IRQ> [ 112.836083] ? finish_td+0xb3/0xf0 [ 112.836092] ? ath9k_rx_prepare.isra.11+0x22f/0x2a0 [ath9k_htc] [ 112.836099] ath9k_rx_tasklet+0x10b/0x1d0 [ath9k_htc] [ 112.836105] tasklet_action_common.isra.22+0x63/0x110 [ 112.836108] tasklet_action+0x22/0x30 [ 112.836115] __do_softirq+0xe4/0x2da [ 112.836118] irq_exit+0xae/0xb0 [ 112.836121] do_IRQ+0x86/0xe0 [ 112.836125] common_interrupt+0xf/0xf [ 112.836126] </IRQ> [ 112.836130] RIP: 0010:cpuidle_enter_state+0xa9/0x440 [ 112.836133] Code: 3d bc 20 38 55 e8 f7 1d 84 ff 49 89 c7 0f 1f 44 00 00 31 ff e8 28 29 84 ff 80 7d d3 00 0f 85 e6 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ed 0f 89 ff 01 00 00 41 c7 44 24 10 00 00 00 00 48 83 c4 18 [ 112.836134] RSP: 0018:ffffaa61800e3e48 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde [ 112.836136] RAX: ffff909a2f96b340 RBX: ffffffffabb58200 RCX: 000000000000001f [ 112.836137] RDX: 0000001a458adc5d RSI: 0000000026c9b581 RDI: 0000000000000000 [ 112.836139] RBP: ffffaa61800e3e88 R08: 0000000000000002 R09: 000000000002abc0 [ 112.836140] R10: ffffaa61800e3e18 R11: 000000000000002d R12: ffffca617fb40b00 [ 112.836141] R13: 0000000000000002 R14: ffffffffabb582d8 R15: 0000001a458adc5d [ 112.836145] ? cpuidle_enter_state+0x98/0x440 [ 112.836149] ? menu_select+0x370/0x600 [ 112.836151] cpuidle_enter+0x2e/0x40 [ 112.836154] call_cpuidle+0x23/0x40 [ 112.836156] do_idle+0x204/0x280 [ 112.836159] cpu_startup_entry+0x1d/0x20 [ 112.836164] start_secondary+0x167/0x1c0 [ 112.836169] secondary_startup_64+0xa4/0xb0 [ 112.836173] ---[ end trace 9f4cd18479cc5ae5 ]--- Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12ath9k_htc: Modify byte order for an error messageMasashi Honma1-1/+1
[ Upstream commit e01fddc19d215f6ad397894ec2a851d99bf154e2 ] rs_datalen is be16 so we need to convert it before printing. Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04ath10k: fix get invalid tx rate for Mesh metricMiaoqing Pan1-0/+2
[ Upstream commit 05a11003a56507023f18d3249a4d4d119c0a3e9c ] ath10k does not provide transmit rate info per MSDU in tx completion, mark that as -1 so mac80211 will ignore the rates. This fixes mac80211 update Mesh link metric with invalid transmit rate info. Tested HW: QCA9984 Tested FW: 10.4-3.9.0.2-00035 Signed-off-by: Hou Bao Hou <houbao@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-21ar5523: check NULL before memcpy() in ar5523_cmd()Denis Efremov1-1/+2
commit 315cee426f87658a6799815845788fde965ddaad upstream. memcpy() call with "idata == NULL && ilen == 0" results in undefined behavior in ar5523_cmd(). For example, NULL is passed in callchain "ar5523_stat_work() -> ar5523_cmd_write() -> ar5523_cmd()". This patch adds ilen check before memcpy() call in ar5523_cmd() to prevent an undefined behavior. Cc: Pontus Fuchs <pontus.fuchs@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Laight <David.Laight@ACULAB.COM> Cc: stable@vger.kernel.org Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05ath6kl: Fix off by one error in scan completionKyle Roeschley1-1/+1
[ Upstream commit 5803c12816c43bd09e5f4247dd9313c2d9a2c41b ] When ath6kl was reworked to share code between regular and scheduled scans in commit 3b8ffc6a22ba ("ath6kl: Configure probed SSID list consistently"), probed SSID entry changed from 1-index to 0-indexed. However, ath6kl_cfg80211_scan_complete_event() was missed in that change. Fix its indexing so that we correctly clear out the probed SSID list. Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05ath6kl: Only use match sets when firmware supports itKyle Roeschley1-1/+1
[ Upstream commit fb376a495fbdb886f38cfaf5a3805401b9e46f13 ] Commit dd45b7598f1c ("ath6kl: Include match ssid list in scheduled scan") merged the probed and matched SSID lists before sending them to the firmware. In the process, it assumed match set support is always available in ath6kl_set_probed_ssids, which breaks scans for hidden SSIDs. Now, check that the firmware supports matching SSIDs in scheduled scans before setting MATCH_SSID_FLAG. Fixes: dd45b7598f1c ("ath6kl: Include match ssid list in scheduled scan") Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-28ath9k_hw: fix uninitialized variable dataDenis Efremov1-1/+1
commit 80e84f36412e0c5172447b6947068dca0d04ee82 upstream. Currently, data variable in ar9003_hw_thermo_cal_apply() could be uninitialized if ar9300_otp_read_word() will fail to read the value. Initialize data variable with 0 to prevent an undefined behavior. This will be enough to handle error case when ar9300_otp_read_word() fails. Fixes: 80fe43f2bbd5 ("ath9k_hw: Read and configure thermocal for AR9462") Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: stable@vger.kernel.org Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-25ath9k: fix reporting calculated new FFT upper maxSimon Wunderlich1-1/+1
[ Upstream commit 4fb5837ac2bd46a85620b297002c704e9958f64d ] Since the debug print code is outside of the loop, it shouldn't use the loop iterator anymore but instead print the found maximum index. Cc: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-25ath10k: fix vdev-start timeout on errorBen Greear4-5/+25
[ Upstream commit 833fd34d743c728afe6d127ef7bee67e7d9199a8 ] The vdev-start-response message should cause the completion to fire, even in the error case. Otherwise, the user still gets no useful information and everything is blocked until the timeout period. Add some warning text to print out the invalid status code to aid debugging, and propagate failure code. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-25ath10k: wmi: disable softirq's while calling ieee80211_rxErik Stromdahl1-1/+2
[ Upstream commit 37f62c0d5822f631b786b29a1b1069ab714d1a28 ] This is done in order not to trig the below warning in ieee80211_rx_napi: WARN_ON_ONCE(softirq_count() == 0); ieee80211_rx_napi requires that softirq's are disabled during execution. The High latency bus drivers (SDIO and USB) sometimes call the wmi ep_rx_complete callback from non softirq context, resulting in a trigger of the above warning. Calling ieee80211_rx_ni with softirq's already disabled (e.g., from softirq context) should be safe as the local_bh_disable and local_bh_enable functions (called from ieee80211_rx_ni) are fully reentrant. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-06ath6kl: fix a NULL-ptr-deref bug in ath6kl_usb_alloc_urb_from_pipe()Hui Peng1-0/+8
[ Upstream commit 39d170b3cb62ba98567f5c4f40c27b5864b304e5 ] The `ar_usb` field of `ath6kl_usb_pipe_usb_pipe` objects are initialized to point to the containing `ath6kl_usb` object according to endpoint descriptors read from the device side, as shown below in `ath6kl_usb_setup_pipe_resources`: for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; // get the address from endpoint descriptor pipe_num = ath6kl_usb_get_logical_pipe_num(ar_usb, endpoint->bEndpointAddress, &urbcount); ...... // select the pipe object pipe = &ar_usb->pipes[pipe_num]; // initialize the ar_usb field pipe->ar_usb = ar_usb; } The driver assumes that the addresses reported in endpoint descriptors from device side to be complete. If a device is malicious and does not report complete addresses, it may trigger NULL-ptr-deref `ath6kl_usb_alloc_urb_from_pipe` and `ath6kl_usb_free_urb_to_pipe`. This patch fixes the bug by preventing potential NULL-ptr-deref (CVE-2019-15098). Signed-off-by: Hui Peng <benquike@gmail.com> Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-04ath10k: fix PCIE device wake up failedMiaoqing Pan1-1/+1
[ Upstream commit 011d4111c8c602ea829fa4917af1818eb0500a90 ] Observed PCIE device wake up failed after ~120 iterations of soft-reboot test. The error message is "ath10k_pci 0000:01:00.0: failed to wake up device : -110" The call trace as below: ath10k_pci_probe -> ath10k_pci_force_wake -> ath10k_pci_wake_wait -> ath10k_pci_is_awake Once trigger the device to wake up, we will continuously check the RTC state until it returns RTC_STATE_V_ON or timeout. But for QCA99x0 chips, we use wrong value for RTC_STATE_V_ON. Occasionally, we get 0x7 on the fist read, we thought as a failure case, but actually is the right value, also verified with the spec. So fix the issue by changing RTC_STATE_V_ON from 0x5 to 0x7, passed ~2000 iterations. Tested HW: QCA9984 Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-04ath: DFS JP domain W56 fixed pulse type 3 RADAR detectionAnilkumar Kolli1-1/+1
[ Upstream commit d8792393a783158cbb2c39939cb897dc5e5299b6 ] Increase pulse width range from 1-2usec to 0-4usec. During data traffic HW occasionally fails detecting radar pulses, so that SW cannot get enough radar reports to achieve the success rate. Tested ath10k hw and fw: * QCA9888(10.4-3.5.1-00052) * QCA4019(10.4-3.2.1.1-00017) * QCA9984(10.4-3.6-00104) * QCA988X(10.2.4-1.0-00041) Tested ath9k hw: AR9300 Tested-by: Tamizh chelvam <tamizhr@codeaurora.org> Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-04ath6kl: add some bounds checkingDan Carpenter1-1/+9
[ Upstream commit 5d6751eaff672ea77642e74e92e6c0ac7f9709ab ] The "ev->traffic_class" and "reply->ac" variables come from the network and they're used as an offset into the wmi->stream_exist_for_ac[] array. Those variables are u8 so they can be 0-255 but the stream_exist_for_ac[] array only has WMM_NUM_AC (4) elements. We need to add a couple bounds checks to prevent array overflows. I also modified one existing check from "if (traffic_class > 3) {" to "if (traffic_class >= WMM_NUM_AC) {" just to make them all consistent. Fixes: bdcd81707973 (" Add ath6kl cleaned up driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 01:27:30 +0300