summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)AuthorFilesLines
2016-06-08ath5k: Change led pin configuration for compaq c700 laptopJoseph Salisbury1-1/+1
commit 7b9bc799a445aea95f64f15e0083cb19b5789abe upstream. BugLink: http://bugs.launchpad.net/bugs/972604 Commit 09c9bae26b0d3c9472cb6ae45010460a2cee8b8d ("ath5k: add led pin configuration for compaq c700 laptop") added a pin configuration for the Compaq c700 laptop. However, the polarity of the led pin is reversed. It should be red for wifi off and blue for wifi on, but it is the opposite. This bug was reported in the following bug report: http://pad.lv/972604 Fixes: 09c9bae26b0d3c9472cb6ae45010460a2cee8b8d ("ath5k: add led pin configuration for compaq c700 laptop") Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-08ath10k: fix kernel panic, move arvifs list head init before htt initAnilkumar Kolli1-4/+4
commit 4ad24a9d83bd4bf0a85e95bf144e18d3fda4fbf1 upstream. It is observed that while loading and unloading ath10k modules in an infinite loop, before ath10k_core_start() completion HTT rx frames are received, while processing these frames, dereferencing the arvifs list code is getting hit before initilizing the arvifs list, causing a kernel panic. This patch initilizes the arvifs list before initilizing htt. Fixes the below issue: [<bf88b058>] (ath10k_htt_rx_pktlog_completion_handler+0x278/0xd08 [ath10k_core]) [<bf88b058>] (ath10k_htt_rx_pktlog_completion_handler [ath10k_core]) [<bf88c0dc>] (ath10k_htt_txrx_compl_task+0x5f4/0xeb0 [ath10k_core]) [<bf88c0dc>] (ath10k_htt_txrx_compl_task [ath10k_core]) [<c0234100>] (tasklet_action+0x8c/0xec) [<c0234100>] (tasklet_action) [<c02337c0>] (__do_softirq+0xf8/0x228) [<c02337c0>] (__do_softirq) [<c0233920>] (run_ksoftirqd+0x30/0x90) Code: e5954ad8 e2899008 e1540009 0a00000d (e5943008) ---[ end trace 71de5c2e011dbf56 ]--- Kernel panic - not syncing: Fatal exception in interrupt Fixes: 500ff9f9389d ("ath10k: implement chanctx API") Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-08ath10k: fix rx_channel during hw reconfigureRajkumar Manoharan1-1/+7
commit 1ce8c1484e80010a6e4b9611c65668ff77556f45 upstream. Upon firmware assert, restart work will be triggered so that mac80211 will reconfigure the driver. An issue is reported that after restart work, survey dump data do not contain in-use (SURVEY_INFO_IN_USE) info for operating channel. During reconfigure, since mac80211 already has valid channel context for given radio, channel context iteration return num_chanctx > 0. Hence rx_channel is always NULL. Fix this by assigning channel context to rx_channel when driver restart is in progress. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-08ath10k: fix firmware assert in monitor modeRajkumar Manoharan1-1/+4
commit 8a75fc54745fd3ce9062ab1cc6429a9da9ac2a68 upstream. commit 166de3f1895d ("ath10k: remove supported chain mask") had revealed an issue on monitor mode. Configuring NSS upon monitor interface creation is causing target assert in all qca9888x and qca6174 firmware. Firmware assert issue can be reproduced by below sequence even after reverting commit 166de3f1895d ("ath10k: remove supported chain mask"). ip link set wlan0 down iw wlan0 set type monitor iw phy0 set antenna 7 ip link set wlan0 up This issue is originally reported on qca9888 with 10.1 firmware. Fixes: 5572a95b4b ("ath10k: apply chainmask settings to vdev on creation") Reported-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-08ath10k: fix debugfs pktlog_filter writeAnilkumar Kolli1-1/+6
commit 9ddc486aa09a3413a6c492fcf160ce61bfccb7b1 upstream. It is observed that, we are disabling the packet log if we write same value to the pktlog_filter for the second time. Always enable pktlogs on non zero filter. Fixes: 90174455ae05 ("ath10k: add support to configure pktlog filter") Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-08ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.Vittorio Gambaletta (VittGam)1-0/+10
commit 0f9edcdd88a993914fa1d1dc369b35dc503979db upstream. The Wistron DNMA-92 and Compex WLM200NX have inverted LED polarity (active high instead of active low). The same PCI Subsystem ID is used by both cards, which are based on the same Atheros MB92 design. Cc: <linux-wireless@vger.kernel.org> Cc: <ath9k-devel@qca.qualcomm.com> Cc: <ath9k-devel@lists.ath9k.org> Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-08ath9k: Add a module parameter to invert LED polarity.Vittorio Gambaletta (VittGam)1-0/+7
commit cd84042ce9040ad038e958bc67a46fcfc015c736 upstream. The LED can be active high instead of active low on some hardware. Add the led_active_high module parameter. It defaults to -1 to obey platform data as before. Setting the parameter to 1 or 0 will force the LED respectively active high or active low. Cc: <linux-wireless@vger.kernel.org> Cc: <ath9k-devel@qca.qualcomm.com> Cc: <ath9k-devel@lists.ath9k.org> Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-11ath9k: ar5008_hw_cmn_spur_mitigate: add missing mask_m & mask_p initialisationOleksij Rempel2-10/+3
commit de478a61389cacafe94dc8b035081b681b878f9d upstream. by moving common code to ar5008_hw_cmn_spur_mitigate i forgot to move mask_m & mask_p initialisation. This coused a performance regression on ar9281. Fixes: f911085ffa88 ("ath9k: split ar5008_hw_spur_mitigate and reuse common code in ar9002_hw_spur_mitigate.") Reported-by: Gustav Frederiksen <lkml2017@openmailbox.org> Tested-by: Gustav Frederiksen <lkml2017@openmailbox.org> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20ath9k: fix buffer overrun for ar9287Arnd Bergmann1-4/+3
[ Upstream commit 83d6f1f15f8cce844b0a131cbc63e444620e48b5 ] Code that was added back in 2.6.38 has an obvious overflow when accessing a static array, and at the time it was added only a code comment was put in front of it as a reminder to have it reviewed properly. This has not happened, but gcc-6 now points to the specific overflow: drivers/net/wireless/ath/ath9k/eeprom.c: In function 'ath9k_hw_get_gain_boundaries_pdadcs': drivers/net/wireless/ath/ath9k/eeprom.c:483:44: error: array subscript is above array bounds [-Werror=array-bounds] maxPwrT4[i] = data_9287[idxL].pwrPdg[i][4]; ~~~~~~~~~~~~~~~~~~~~~~~~~^~~ It turns out that the correct array length exists in the local 'intercepts' variable of this function, so we can just use that instead of hardcoding '4', so this patch changes all three instances to use that variable. The other two instances were already correct, but it's more consistent this way. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 940cd2c12ebf ("ath9k_hw: merge the ar9287 version of ath9k_hw_get_gain_boundaries_pdadcs") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-17Merge ath-current from ath.gitKalle Valo5-15/+107
ath10k * fix invalid NSS for 4x4 devices * add QCA9377 hw1.0 support * fix QCA6174 regression with CE5 usage wil6210 * new maintainer - Maya Erez
2015-11-16ath10k: poll HTT send completion when CE 5 is unusedRajkumar Manoharan1-1/+12
commit a70587b3389a ("ath10k: configure copy engine 5 for HTT messages") moved send completion polling under HTT Rx (CE 5) service routine. For QCA6174 based devices copy engine 1 (CE 1) is used for HTT Rx instead of CE 5. So send completion never be called. This is causing "failed to transmit packet, dropping: -105" errors. Fix this by processing send completion from CE 1 service routine instead of CE 5. Fixes: a70587b3389a ("ath10k: configure copy engine 5 for HTT messages") Tested-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-12ath10k: override CE5 configuration for QCA6147 deviceRyan Hsu1-3/+29
Commit a70587b3389a ("ath10k: configure copy engine 5 for HTT messages") introduced to use the unused CE5 for target to host message. For the device like QCA6174, CE5 already assigned for other feature. So for QCA6174, override the CE5 configuration and use the CE1 instead. This patch is based on Rajkumar's earlier patch. Fixes: a70587b3389a ("ath10k: configure copy engine 5 for HTT messages") Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-12ath10k: add QCA9377 hw1.0 supportBartosz Markowski3-0/+23
Add new BMI target version and chip id revision. Register it on supported chips list. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-12ath10k: introduce dev_id to hw_paramsBartosz Markowski4-7/+33
A follow up patch introducing a QCA9377 hw1.0 support will need this device identification helper for an explicit distinction of HWs, as apparently both QCA6174 hw3.0 and QCA9377 share the same BMI target version (0x0502000x). For the QCA9377 hw1.1 previously added we were just lucky we did not overlap with the same chip_id_rev. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-12ath10k: update missing hw_params of QCA9377 hw1.1Bartosz Markowski1-1/+3
The uart_pin was incorrectly configured for QCA9377 and the recently added hw_params were omitted. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-12ath10k: fix the currently supported QCA9377 target version nameBartosz Markowski3-5/+9
When introducing the original QCA9377 support, the chip target version was wrongly picked. The chip advertising itself with bmi target value equal to 0x05020001 is in fact a 1.1 revision. I realized this once I got a real 1.1 hw to play with. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-10ath10k: fix invalid NSS for 4x4 devicesRajkumar Manoharan1-1/+1
The number of spatial streams that are derived from chain mask for 4x4 devices is using wrong bitmask and conditional check. This is affecting downlink throughput for QCA99x0 devices. Earlier cfg_tx_chainmask is not filled by default until user configured it and so get_nss_from_chainmask never be called. This issue is exposed by recent commit 166de3f1895d ("ath10k: remove supported chain mask"). By default maximum supported chain mask is filled in cfg_tx_chainmask. Cc: stable@vger.kernel.org Fixes: 5572a95b4b ("ath10k: apply chainmask settings to vdev on creation") Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-05Merge tag 'driver-core-4.4-rc1' of ↵Linus Torvalds4-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the "big" driver core updates for 4.4-rc1. Primarily a bunch of debugfs updates, with a smattering of minor driver core fixes and updates as well. All have been in linux-next for a long time" * tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: debugfs: Add debugfs_create_ulong() of: to support binding numa node to specified device in devicetree debugfs: Add read-only/write-only bool file ops debugfs: Add read-only/write-only size_t file ops debugfs: Add read-only/write-only x64 file ops debugfs: Consolidate file mode checks in debugfs_create_*() Revert "mm: Check if section present during memory block (un)registering" driver-core: platform: Provide helpers for multi-driver modules mm: Check if section present during memory block (un)registering devres: fix a for loop bounds check CMA: fix CONFIG_CMA_SIZE_MBYTES overflow in 64bit base/platform: assert that dev_pm_domain callbacks are called unconditionally sysfs: correctly handle short reads on PREALLOC attrs. base: soc: siplify ida usage kobject: move EXPORT_SYMBOL() macros next to corresponding definitions kobject: explain what kobject's sd field is debugfs: document that debugfs_remove*() accepts NULL and error values debugfs: Pass bool pointer to debugfs_create_bool() ACPI / EC: Fix broken 64bit big-endian users of 'global_lock'
2015-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
2015-10-29ath6kl: implement ethtool statsBen Greear1-0/+123
This supports a way to get target stats through normal ethtool stats API. For instance: # ethtool -S wlan1 NIC statistics: tx_pkts_nic: 353 tx_bytes_nic: 25142 rx_pkts_nic: 6 rx_bytes_nic: 996 d_tx_ucast_pkts: 89 d_tx_bcast_pkts: 264 d_tx_ucast_bytes: 3020 d_tx_bcast_bytes: 22122 ... Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath6kl: break stats gathering code into separate methodBen Greear2-23/+34
This will allow us to call it from elsewhere when implementing ethtool stats. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath6kl: fix firmware version assignmentBen Greear1-1/+1
Improper use of strlcpy caused garbage to be appended to the firmware version string. Fix this by paying attention to the ie_lenth. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath6kl: add error message to explain lack of HTBen Greear1-0/+3
It can take a user a while to understand why their NIC that advertises 802.11n support cannot actually do 802.11n. Print out a warning in the logs to save the next poor person to use this NIC some trouble. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath6kl: report antenna configurationBen Greear2-0/+19
This lets 'iw phy phy0 info' report antennas for the radio device: ... Available Antennas: TX 0x2 RX 0x2 Configured Antennas: TX 0x2 RX 0x2 ... Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29wil6210: handle failure in Tx vring configVladimir Kondratiev1-1/+1
When configuring Tx vring for new connection, WMI call to the firmware may fail. In this case, need to clean up properly. In particular, need to call cfg80211_del_sta() in case of AP like interface. Perform full "disconnect" procedure for proper clean up Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29wil6210: fix device ready detectionVladimir Kondratiev3-13/+7
Adjust driver behavior during FW boot. Proper sequence of events after reset and FW download, is as following: - FW prepares mailbox structure and reports IRQ "FW_READY" - driver caches mailbox registers, marks mailbox readiness - FW sends WMI_FW_READY event, ignore it - FW sends WMI_READY event with some data - driver stores relevant data marks FW is operational Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29wil6210: Fix TSO overflow handlingHamad Kadmany1-15/+15
When Tx ring full is encountered with TSO, printout of "DMA error" was wrongly printed. In addition, in case of Tx ring full return proper error code so that NETDEV_TX_BUSY is returned to network stack in order not to drop the packets and retry transmission of the packets when ring is emptied. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29wil6210: ignore selected WMI eventsVladimir Kondratiev1-0/+10
Some events are ignored for purpose; such events should not be treated as "unhandled events". Replace info message saying "unhandled" with debug one saying "ignore", to reduce dmesg pollution Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: add QCA9377 chipset supportBartosz Markowski4-0/+48
Add the hardware name, revision and update the pci_id table. Currently there're two HW ref. designs available I'm aware of, with 1.0.2 and 1.1 chip revisions. I've access and been using the first one so far and this patch cover only it. QCA9377 inherits most of the stuff (e.g. fw interfaces) from QCA61x4 design, so the integration was pretty straightforward. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: reload HT/VHT capabilities on antenna changeRajkumar Manoharan1-11/+28
To reflect configured antenna settings in HT/VHT MCS map, reload the HT/VHT capabilities upon antenna change. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: move static HT/VHT capability setup functionsRajkumar Manoharan1-140/+140
Move HT and VHT capabiltity setup static functions to avoid forward declaration. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: fill HT/VHT MCS rateset only for configured chainmaskRajkumar Manoharan1-3/+5
HT/VHT MCS rateset should be filled only for configured chainmask rather that max supported chainmask. Fix that by checking configured chainmask while filling HT/VHT MCS rate map. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: remove supported chain maskRajkumar Manoharan3-16/+9
Removing supported chainmask fields as it can be always derived from num_rf_chains. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: remove shadow copy of CE descriptors for source ringRajkumar Manoharan3-33/+0
For the messages from host to target, shadow copy of CE descriptors are maintained in source ring. Before writing actual CE descriptor, first shadow copy is filled and then it is copied to CE address space. To optimize in download path and to reduce d-cache pressure, removing shadow copy of CE descriptors. This will also reduce driver memory consumption by 33KB during on device probing. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: cleanup copy engine send completionRajkumar Manoharan3-50/+12
The physical address necessary to unmap DMA ('bufferp') is stored in ath10k_skb_cb as 'paddr'. ath10k doesn't rely on the meta/transfer_id when handling send completion (htc ep id is stored in sk_buff control buffer). So the unused output arguments {bufferp, nbytesp and transfer_idp} are removed from CE send completion. This change is needed before removing the shadow copy of copy engine (CE) descriptors in follow up patch. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: remove send completion validation in diag read/writeRajkumar Manoharan1-20/+0
CE diag window access is serialized (it has to be by design) so there's no way to get a different send completion. so there's no need for post completion validation. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: use local memory instead of shadow descriptor in ce_sendRajkumar Manoharan1-7/+6
Currently to avoid uncached memory access while filling up copy engine descriptors, shadow descriptors are used. This can be optimized further by removing shadow descriptors. To achieve that first shadow ring dependency in ce_send is removed by creating local copy of the descriptor on stack and make a one-shot copy into the "uncached" descriptor. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: add fw_stats support to 10.4 firmwareManikanta Pubbisetty3-0/+358
This patch adds support for getting firmware debug stats in 10.4 fw. Signed-off-by: Manikanta Pubbisetty <c_mpubbi@qti.qualcomm.com> Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: add FW API support to test modeAlan Liu5-21/+205
Add WMI-TLV and FW API support in ath10k testmode. Ath10k can get right wmi command format from UTF image to communicate UTF firmware. Signed-off-by: Alan Liu <alanliu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-28ath10k: enable adaptive CCAMaharaja6-0/+85
European Union has made it mandatory that all devices working in 2.4 GHz has to adhere to the ETSI specification (ETSI EN 300 328 V1.9.1) beginnig this year. The standard basically speaks about interferences in 2.4Ghz band. For example, when 802.11 device detects interference, TX must be stopped as long as interference is present. Adaptive CCA is a feature, when enabled the device learns from the environment and configures CCA levels adaptively. This will improve detecting interferences and the device can stop trasmissions till the interference is present eventually leading to good performances in varying interference conditions. The patch includes code for enabling adaptive CCA for 10.2.4 firmware on QCA988X. Signed-off-by: Maharaja <c_mkenna@qti.qualcomm.com> Signed-off-by: Manikanta Pubbisetty <c_mpubbi@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-28wcn36xx: Remove warning message when dev is NULL for arm64 dma_alloc.yfw1-17/+17
arm64 has requirement that all the dma operations have actual device. Otherwise, following warnning message shown and dma allocation fails: WARNING: CPU: 0 PID: 954 at arch/arm64/mm/dma-mapping.c:106 __dma_alloc+0x24c/0x258() Use an actual device structure for DMA allocation Modules linked in: wcn36xx wcn36xx_platform CPU: 0 PID: 954 Comm: ifconfig Not tainted 4.0.0+ #14 Hardware name: Qualcomm Technologies, Inc. MSM 8916 MTP (DT) Call trace: [<ffffffc000089904>] dump_backtrace+0x0/0x124 [<ffffffc000089a38>] show_stack+0x10/0x1c [<ffffffc000627114>] dump_stack+0x80/0xc4 [<ffffffc0000b2e64>] warn_slowpath_common+0x98/0xd0 [<ffffffc0000b2ee8>] warn_slowpath_fmt+0x4c/0x58 [<ffffffc00009487c>] __dma_alloc+0x248/0x258 [<ffffffbffc009270>] wcn36xx_dxe_allocate_mem_pools+0xc4/0x108 [wcn36xx] [<ffffffbffc0079c4>] wcn36xx_start+0x38/0x240 [wcn36xx] [<ffffffc0005f161c>] ieee80211_do_open+0x1b0/0x9a4 [<ffffffc0005f1e68>] ieee80211_open+0x58/0x68 [<ffffffc00051693c>] __dev_open+0xb0/0x120 [<ffffffc000516c10>] __dev_change_flags+0x88/0x150 [<ffffffc000516cf4>] dev_change_flags+0x1c/0x5c [<ffffffc000570950>] devinet_ioctl+0x644/0x6f0 Signed-off-by: Yin, Fengwei <fengwei.yin@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-10-28wcn36xx: introduce per-channel ring buffer locksBob Copeland2-8/+20
wcn36xx implements a ring buffer for transmitted frames for each (high and low priority) DMA channel. The ring buffers are lockless: new frames are inserted at the head of the queue, while finished packets are reaped from the tail. Unfortunately, the list manipulations are missing any kind of barriers so are susceptible to various races: for example, a TX completion handler might read an updated desc->ctrl before the head has actually advanced, and then null out the ctl->skb pointer while it is still being used in the TX path. Simplify things here by adding a spin lock when traversing the ring. This change increased stability for me without adding any noticeable overhead on my platform (xperia z). Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-10-28ath9k: fix phyerror codesZefir Kurtisi2-10/+22
Some of the ath9k_phyerr enums were wrong from the beginning (and even before). Most of the time the codes were used for counters to be displayed over debugfs, which made this a non-functional issue. Some (e.g. ATH9K_PHYERR_FALSE_RADAR_EXT) are used for radar detection and require the correct code to work as intended. This patch includes: a) fixes ATH9K_PHYERR_FALSE_RADAR_EXT: 24 => 36 ATH9K_PHYERR_CCK_LENGTH_ILLEGAL: 32 => 28 ATH9K_PHYERR_CCK_POWER_DROP: 33 => 29 ATH9K_PHYERR_HT_CRC_ERROR: 34 => 32 ATH9K_PHYERR_HT_LENGTH_ILLEGAL: 35 => 33 ATH9K_PHYERR_HT_RATE_ILLEGAL: 36 => 34 b) extensions ATH9K_PHYERR_CCK_BLOCKER = 24 ATH9K_PHYERR_HT_ZLF = 35 ATH9K_PHYERR_GREEN_FIELD = 37 Aside from the correction and completion made in the enum, the patch also extends the display of the related counters in the debugfs. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-10-28Merge tag 'wireless-drivers-next-for-davem-2015-10-27' of ↵David S. Miller43-561/+1867
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== here's a bigger pull request for 4.4. The diffstat looks scary as we created a new directory realtek for all realtek drivers. In the future I'm planning to create similar directories for all vendors, currently we just have ath, mediatek and realtek. This change has been in linux-next for a couple of weeks so it should be safe, but of course you never know. There's also a new driver rtl8xxxu for few realtek USB devices. This just made it to the last linux-next build. Otherwise there's nothing really special, more info below. If time permits, and it's ok for you, I'm hoping to send you a one more pull request this week. brcmfmac * using netdev carrier state * add and rework some cfg80211 callbacks mainly for AP mode * use devcoredump when triggered by firmware event realtek * create new directory drivers/net/wireless/realtek/ for all realtek drivers, not visible to users (no kconfig changes etc) * add rtl8xxxu, a new mac80211 driver for RTL8723AU, RTL8188CU, RTL8188RU, RTL8191CU, RTL8192CU and hopefully more in the future ath10k * add board 2 API support for automatically choosing correct board file * data path optimisations * disable PCI power save for qca988x and QCA99x0 due to interop reasons wil6210 * BlockAckReq support * firmware crashdump using devcoredump * capture all frames with sniffer ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27ath6kl: add missing of_node_putJulia Lawall1-0/+1
for_each_compatible_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression e; local idexpression n; @@ for_each_compatible_node(n,...) { ... when != of_node_put(n) when != e = n ( return n; | + of_node_put(n); ? return ...; ) ... } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22Merge tag 'mac80211-next-for-davem-2015-10-21' of ↵David S. Miller1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Here's another set of patches for the current cycle: * I merged net-next back to avoid a conflict with the * cfg80211 scheduled scan API extensions * preparations for better scan result timestamping * regulatory cleanups * mac80211 statistics cleanups * a few other small cleanups and fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21Merge ath-next from ath.gitKalle Valo39-548/+1855
Major changes: ath10k * add board 2 API support for automatically choosing correct board file * data path optimisations * disable PCI power save for qca988x and QCA99x0 due to interop reasons wil6210 * BlockAckReq support * firmware crashdump using devcoredump * capture all frames with sniffer
2015-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-2/+3
Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-19ath10k: make fw stats prints specific to firmware versionManikanta Pubbisetty6-259/+414
The patch makes debug stats prints fw specific by adding a new member in wmi_ops. That way it's easier to add fw_stats support to 10.4 firmware. Signed-off-by: Manikanta Pubbisetty <c_mpubbi@qti.qualcomm.com> Signed-off-by: Tamizh Chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-19ath10k: disable PCI PS for QCA988X and QCA99X0Anilkumar Kolli2-1/+88
This patch disables PCI PS for QCA988X and QCA99X0, Since PCI PS is validated for QCA6174, let it be enabled only for QCA6174. It would be better to execute PCI PS related functions only for the supported devices. PCI time out issue is observed with QCA99X0 on x86 platform, We will disable PCI PS for QCA988X and QCA99X0 until PCI PS is properly implemented. Taking and releasing ps_lock is causing higher CPU consumption. Michal Kazior suggested ps_lock overhead to be reworked so that ath10k_pci_wake/sleep functions are called less often, i.e. move the powersave logic up (only during irq handling, tx path, submitting fw commands) but that's a bigger change and can be implemented later. Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-04 01:51:02 +0300