summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)AuthorFilesLines
2011-06-01ath9k: mark few functions as staticMohammed Shafi Shajakhan2-6/+3
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01ath9k: make ath9k_setpower function as staticMohammed Shafi Shajakhan2-2/+1
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01ath9k_hw: remove ath9k_hw_get_desc_linkFelix Fietkau4-20/+0
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01ath9k: unify edma and non-edma tx code, improve tx fifo handlingFelix Fietkau4-206/+138
EDMA based chips (AR9380+) have 8 Tx FIFO slots, which are used to fix the tx queue start/stop race conditions which have to be worked around for earlier chips by keeping the last descriptor in the queue. The current code stores all frames that do not fit onto the 8 FIFO slots in a separate list. Whenever a FIFO slot is freed up, the next frame (or A-MPDU) from the pending queue gets moved to that slot. This process is not only inefficient, but also unnecessary. The code can be improved visibly by keeping the pending queue fully linked, and moving the contents of the entire queue to a FIFO slot as it becomes available. This patch makes the necessary changes for that and also merges some code that was duplicated for EDMA vs non-EDMA. It changes txq->axq_link to point to the last descriptor instead of the link pointer, so that ath9k_hw_set_desc_link can be used, which works on all chips. With this patch, a small performance increase for non-aggregated traffic was observed on AR9380 based embedded hardware. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01ath9k: remove redundant if checkMohammed Shafi Shajakhan1-17/+12
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-27Merge ↵John W. Linville7-5/+34
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-05-27ath9k: Fix AR9287 calibrationAdrian Chadd1-1/+1
The AR9287 calibration code was not being called because of an incorrect MAC revision check. This forced the AR9287 to use the AR9285 initial calibration code and bypass the AR9287 code entirely. Signed-off-by: Adrian Chadd <adrian@freebsd.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-27wireless: Default to 'n' for 2 new added devices in Kconfig.Tao Ma1-1/+0
We make oldconfig every time when a new kernel arrives, but if we don't have such a device(I guess this is the most common case for a new device), the default value should be 'n' so that the kernel size we build doesn't grow up too much quickly. For anyone who has the device, it is OK for them to turn it on by themselves. Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-26ath9k: set 40 Mhz rate only if hw is configured in ht40Rajkumar Manoharan1-1/+2
Whenever there is a channel width change from 40 Mhz to 20 Mhz, the hardware is reconfigured to ht20. Meantime before doing the rate control updation, the packets are being transmitted are selected rate with IEEE80211_TX_RC_40_MHZ_WIDTH. While transmitting ht40 rate packets in ht20 mode is causing baseband panic with AR9003 based chips. ==== BB update: BB status=0x02001109 ==== ath: ** BB state: wd=1 det=1 rdar=0 rOFDM=1 rCCK=1 tOFDM=0 tCCK=0 agc=2 src=0 ** ath: ** BB WD cntl: cntl1=0xffff0085 cntl2=0x00000004 ** ath: ** BB mode: BB_gen_controls=0x000033c0 ** ath: ** BB busy times: rx_clear=99%, rx_frame=0%, tx_frame=0% ** ath: ==== BB update: done ==== Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-26ath9k_hw: disable phy restart on baseband panic caused by RXSMRajkumar Manoharan3-1/+28
While receiving unsupported rate frame rx state machine gets into a state 0xb and if phy_restart happens in that state, BB would go hang. If RXSM is in 0xb state after first bb panic, ensure to disable the phy_restart. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-26ath9k: Reset chip on baseband hangRajkumar Manoharan1-1/+3
Resetting hardware helps to recover from baseband hang/panic for AR9003 based chips. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-25Merge branch 'for-davem' of ↵David S. Miller69-144/+253
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-05-25Merge ↵John W. Linville69-144/+253
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-05-23Merge branch 'for-linus' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) b43: fix comment typo reqest -> request Haavard Skinnemoen has left Atmel cris: typo in mach-fs Makefile Kconfig: fix copy/paste-ism for dell-wmi-aio driver doc: timers-howto: fix a typo ("unsgined") perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course'). treewide: fix a few typos in comments regulator: change debug statement be consistent with the style of the rest Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations" audit: acquire creds selectively to reduce atomic op overhead rtlwifi: don't touch with treewide double semicolon removal treewide: cleanup continuations and remove logging message whitespace ath9k_hw: don't touch with treewide double semicolon removal include/linux/leds-regulator.h: fix syntax in example code tty: fix typo in descripton of tty_termios_encode_baud_rate xtensa: remove obsolete BKL kernel option from defconfig m68k: fix comment typo 'occcured' arch:Kconfig.locks Remove unused config option. treewide: remove extra semicolons ...
2011-05-19ath9k: use PS wakeup before REG_READMohammed Shafi Shajakhan1-1/+1
otherwise we will get deadbeef when the station is in idle state Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: implement .tx_last_beacon()Felix Fietkau3-0/+55
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: fix ad-hoc nexttbtt calculationFelix Fietkau1-1/+1
rounding up the delta between last-beacon-tsf and tsf to intval is wrong and can lead to misconfigured timers which breaks beacon transmission. Fix this by adding intval and subtracting the offset of the tsf within the current slot. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: Drag the driver to the year 2011Sujith Manoharan65-64/+80
The Times They Are a-Changin'. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath_hw: Fix bssid mask documentationMohammed Shafi Shajakhan1-6/+4
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix packet timeoutSujith Manoharan1-2/+2
The WMI tx status event timeout was not aligning with the TX cleanup timer threshold value. Fix this to handle dropped packets. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Change credit limit for UB94/95Sujith Manoharan1-1/+1
Reduce the credit size for UB94/95 to fix target hangs. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix max subframe handlingSujith Manoharan2-6/+1
Commit "ath9k_htc: Fix AMPDU subframe handling" registered the maximum subframe limit of the driver with mac80211, which was used in ADDBA negotiation. While technically correct, this causes inter-operability issues with a few APs. Revert to the older behavior to fix this. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix BSSID calculationSujith Manoharan2-23/+44
The BSSID/AID has to be set for the first associated station interface. Subsequent interfaces may move out of assoc/disassoc status, in which case, the BSSID has to be re-calculated from the available interfaces. Also, ANI should be enabled or disabled based on the current opmode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix RX filter calculationSujith Manoharan1-0/+4
Choose the MY_BEACON filter only in case of a single interface. Also, set the ATH9K_RX_FILTER_MCAST_BCAST_ALL filter in case of interfaces. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Recalculate the BSSID mask on interfaceSujith Manoharan1-0/+2
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix station flagsSujith Manoharan2-9/+1
The FW does absolutely nothing with the station flags, so remove them. But keep the field around since it might come in handy in the future. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix mode selectionSujith Manoharan3-11/+6
Remove all the unsupported modes like FH, TURBO etc. Since this requires a FW update, increase the fw version to 1.3 Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: fix ad-hoc mode beacon selectionFelix Fietkau1-12/+20
In ad-hoc mode, beacon timers are configured differently compared to AP mode, and (depending on the scenario) can vary enough to make the beacon tasklet not detect slot 0 based on the TSF. Since staggered beacons are not (and cannot be) used in ad-hoc mode, it makes more sense to just hardcode slot 0 here, avoiding unnecessary TSF reads and calculations. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: Fix power save wrappers in debug opsRajkumar Manoharan1-0/+8
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-18Merge branch 'master' of ↵David S. Miller1-0/+8
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/vmxnet3/vmxnet3_ethtool.c net/core/dev.c
2011-05-17Merge branch 'master' of ↵John W. Linville20-163/+430
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-tx.c net/mac80211/sta_info.h
2011-05-16carl9170: advertise interface combinationsChristian Lamparter3-9/+24
In order to provide multiple interfaces for a single device, the driver will be required to advertise all possible interface configurations to the stack. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k: make npending frames check as boolMohammed Shafi Shajakhan1-2/+5
we are not doing anything by tracking the number of pending frames. bail out when we first find a pending frame in any one of the 10 queues. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k: make sure main_rssi is positiveMohammed Shafi Shajakhan1-2/+2
some times the rssi control descriptor for the main antenna may be negative like that of alternate antenna, hence before incrementing packet counts/rssi of main/alternate antenna make sure both main_rssi and alt_rssi are positive only. this avoids wrong selection of antenna due to diversity Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k: configure fast_div_bias based on diversity groupMohammed Shafi Shajakhan1-43/+131
configure fast diversity bias based on the antenna diversity group and based on main/alt LNA configurations. also configure main antenna and alternate antenna to gain-table 0 for diversity group 2(AR9485) Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k: Implement an API to swap main/ALT LNA'sMohammed Shafi Shajakhan1-1/+30
for the diversity group 2(AR9485) we swap the LNA's of main/ALT antenna based on alternate antenna's rssi average in comparision with main antenna's rssi, while for AR9285(antenna diversity group 0)we still follow the older method of looking at the packet count in alternate antenna Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k_hw: define antenna diversity groupMohammed Shafi Shajakhan5-2/+6
AR9285 belongs to diversity group 0 and AR9485 belongs to diversity group 2. Based on the diversity group we configure certain antenna diversity paramaters such as lna1_lna2_delta and fast diversity bias values. For AR9485 we have some gain table parameter which selects the gain table 0/1 for main and alternate antenna Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k_hw: define modules to get/set Antenna diversity paramatersMohammed Shafi Shajakhan1-0/+44
these are the two important modules that will be called by the antenna diversity algorithm module in the rx. this will continuosly configure the hardware based on the current diversity status obtained from the algorithm Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k_hw: config diversity based on eeprom contentsMohammed Shafi Shajakhan1-6/+44
* enable LNA-diversity, fast-diversity for AR9485 based on the value read from EEPROM content * if antenna diversity/combining is supported, set LNA1 for the main antenna and LNA2 for the alternate antenna based on the new diversity algorithm Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Cc: Luis Rodriguez <Luis.Rodriguez@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k_hw: define registers/macros to support Antenna diversityMohammed Shafi Shajakhan2-0/+25
define few registers and macros to configure/enable Antenna diversity parameters in AR9485 Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k_hw: enable Antenna diversity for AR9485Mohammed Shafi Shajakhan1-0/+16
read antenna diversity and combining information from the EEPROM. Enable antenna diversity/combining feature only when both LNA diversity and fast diversity are supported Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Tested-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k_hw: make antenna diversity modules chip specificMohammed Shafi Shajakhan3-24/+39
this is necessary to support Antenna diversity and combining in new chip sets such as AR9485, previously Antenna diversity support is available only in AR9285 Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-12ath9k_hw: Fix STA connection issues with AR9380 (XB113).Senthil Balasubramanian1-1/+1
XB113 (AR9380) 3x3 SB 5G only cards were failing to connect to APs due to incorrect xpabiaslevel configuration. fix it. Cc: stable@kernel.org Cc: Ray Li <ray.li@greenwavereality.com> Cc: Kathy Giori <kathy.giori@atheros.com> Cc: Aeolus Yang <aeolus.yang@atheros.com> Cc: compat@orbit-lab.org Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-12ath9k_hw: fix dual band assumption for XB113Luis R. Rodriguez1-1/+1
The XB113 cards are single band, 5 GHz-only, but the default settings were configured to assume it was dual band. Users of these cards then would see 2.4 GHz channels but you would never get any scan results from these channels given that the radio is not present. Cc: stable@kernel.org Cc: Fiona Cain <Fiona.Cain@atheros.com> Cc: Ray Li <ray.li@greenwavereality.com> Cc: Kathy Giori <kathy.giori@atheros.com> Cc: Aeolus Yang <aeolus.yang@atheros.com> Cc: Dan Friedman <dan.friedman@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-12Merge branch 'master' of ↵David S. Miller1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-05-11ath9k: fix a regression in PS frame filter handlingFelix Fietkau2-0/+11
Only leave filtering enabled for AP or VLAN interfaces, clear the destination mask for all other interfaces. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11ath5k: Fix lockup due to un-init spinlock.Ben Greear1-1/+1
This was introduced in 2.6.39-rc1 it seems. Signed-off-by: Ben Greear <greearb@candelatech.com> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11ath9k: fix beaconing for mesh interfacesJavier Cardona1-1/+3
Mesh beaconing on ath9k was broken by this commit: commit 4801416c76a3a355076d6d371c00270dfe332e1c Author: Ben Greear <greearb@candelatech.com> Date: Sat Jan 15 19:13:48 2011 +0000 This patch assigns the right opmode when the device is used in mesh mode. Reported-by: Fabrice Deyber fabricedeyber@agilemesh.com Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k: Failed to set default beacon rssi in AP/IBSS modeRajkumar Manoharan1-0/+1
This beacon rssi will be used to set noisefloor during ani reset. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k: Fix rssi update in ad-hoc modeRajkumar Manoharan1-1/+2
The average beacon rssi which will be used by ani is not updated in adhoc mode. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 01:18:33 +0300