summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)AuthorFilesLines
2023-03-11wifi: ath9k: Fix potential stack-out-of-bounds write in ath9k_wmi_rsp_callback()Minsuk Kang1-0/+1
[ Upstream commit 8a2f35b9830692f7a616f2f627f943bc748af13a ] Fix a stack-out-of-bounds write that occurs in a WMI response callback function that is called after a timeout occurs in ath9k_wmi_cmd(). The callback writes to wmi->cmd_rsp_buf, a stack-allocated buffer that could no longer be valid when a timeout occurs. Set wmi->last_seq_id to 0 when a timeout occurred. Found by a modified version of syzkaller. BUG: KASAN: stack-out-of-bounds in ath9k_wmi_ctrl_rx Write of size 4 Call Trace: memcpy ath9k_wmi_ctrl_rx ath9k_htc_rx_msg ath9k_hif_usb_reg_in_cb __usb_hcd_giveback_urb usb_hcd_giveback_urb dummy_timer call_timer_fn run_timer_softirq __do_softirq irq_exit_rcu sysvec_apic_timer_interrupt Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230104124130.10996-1-linuxlovemin@yonsei.ac.kr Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no callback ↵Fedor Pchelkin1-1/+3
function [ Upstream commit 9b25e3985477ac3f02eca5fc1e0cc6850a3f7e69 ] It is stated that ath9k_htc_rx_msg() either frees the provided skb or passes its management to another callback function. However, the skb is not freed in case there is no another callback function, and Syzkaller was able to cause a memory leak. Also minor comment fix. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Reported-by: syzbot+e008dccab31bd3647609@syzkaller.appspotmail.com Reported-by: syzbot+6692c72009680f7c4eb2@syzkaller.appspotmail.com Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230104123546.51427-1-pchelkin@ispras.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18wifi: ar5523: Fix use-after-free on ar5523_cmd() timed outShigeru Yoshida1-0/+6
[ Upstream commit b6702a942a069c2a975478d719e98d83cdae1797 ] syzkaller reported use-after-free with the stack trace like below [1]: [ 38.960489][ C3] ================================================================== [ 38.963216][ C3] BUG: KASAN: use-after-free in ar5523_cmd_tx_cb+0x220/0x240 [ 38.964950][ C3] Read of size 8 at addr ffff888048e03450 by task swapper/3/0 [ 38.966363][ C3] [ 38.967053][ C3] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.0.0-09039-ga6afa4199d3d-dirty #18 [ 38.968464][ C3] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014 [ 38.969959][ C3] Call Trace: [ 38.970841][ C3] <IRQ> [ 38.971663][ C3] dump_stack_lvl+0xfc/0x174 [ 38.972620][ C3] print_report.cold+0x2c3/0x752 [ 38.973626][ C3] ? ar5523_cmd_tx_cb+0x220/0x240 [ 38.974644][ C3] kasan_report+0xb1/0x1d0 [ 38.975720][ C3] ? ar5523_cmd_tx_cb+0x220/0x240 [ 38.976831][ C3] ar5523_cmd_tx_cb+0x220/0x240 [ 38.978412][ C3] __usb_hcd_giveback_urb+0x353/0x5b0 [ 38.979755][ C3] usb_hcd_giveback_urb+0x385/0x430 [ 38.981266][ C3] dummy_timer+0x140c/0x34e0 [ 38.982925][ C3] ? notifier_call_chain+0xb5/0x1e0 [ 38.984761][ C3] ? rcu_read_lock_sched_held+0xb/0x60 [ 38.986242][ C3] ? lock_release+0x51c/0x790 [ 38.987323][ C3] ? _raw_read_unlock_irqrestore+0x37/0x70 [ 38.988483][ C3] ? __wake_up_common_lock+0xde/0x130 [ 38.989621][ C3] ? reacquire_held_locks+0x4a0/0x4a0 [ 38.990777][ C3] ? lock_acquire+0x472/0x550 [ 38.991919][ C3] ? rcu_read_lock_sched_held+0xb/0x60 [ 38.993138][ C3] ? lock_acquire+0x472/0x550 [ 38.994890][ C3] ? dummy_urb_enqueue+0x860/0x860 [ 38.996266][ C3] ? do_raw_spin_unlock+0x16f/0x230 [ 38.997670][ C3] ? dummy_urb_enqueue+0x860/0x860 [ 38.999116][ C3] call_timer_fn+0x1a0/0x6a0 [ 39.000668][ C3] ? add_timer_on+0x4a0/0x4a0 [ 39.002137][ C3] ? reacquire_held_locks+0x4a0/0x4a0 [ 39.003809][ C3] ? __next_timer_interrupt+0x226/0x2a0 [ 39.005509][ C3] __run_timers.part.0+0x69a/0xac0 [ 39.007025][ C3] ? dummy_urb_enqueue+0x860/0x860 [ 39.008716][ C3] ? call_timer_fn+0x6a0/0x6a0 [ 39.010254][ C3] ? cpuacct_percpu_seq_show+0x10/0x10 [ 39.011795][ C3] ? kvm_sched_clock_read+0x14/0x40 [ 39.013277][ C3] ? sched_clock_cpu+0x69/0x2b0 [ 39.014724][ C3] run_timer_softirq+0xb6/0x1d0 [ 39.016196][ C3] __do_softirq+0x1d2/0x9be [ 39.017616][ C3] __irq_exit_rcu+0xeb/0x190 [ 39.019004][ C3] irq_exit_rcu+0x5/0x20 [ 39.020361][ C3] sysvec_apic_timer_interrupt+0x8f/0xb0 [ 39.021965][ C3] </IRQ> [ 39.023237][ C3] <TASK> In ar5523_probe(), ar5523_host_available() calls ar5523_cmd() as below (there are other functions which finally call ar5523_cmd()): ar5523_probe() -> ar5523_host_available() -> ar5523_cmd_read() -> ar5523_cmd() If ar5523_cmd() timed out, then ar5523_host_available() failed and ar5523_probe() freed the device structure. So, ar5523_cmd_tx_cb() might touch the freed structure. This patch fixes this issue by canceling in-flight tx cmd if submitted urb timed out. Link: https://syzkaller.appspot.com/bug?id=9e12b2d54300842b71bdd18b54971385ff0d0d3a [1] Reported-by: syzbot+95001b1fd6dfcc716c29@syzkaller.appspotmail.com Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221009183223.420015-1-syoshida@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18wifi: ath9k: verify the expected usb_endpoints are presentFedor Pchelkin1-0/+14
[ Upstream commit 16ef02bad239f11f322df8425d302be62f0443ce ] The bug arises when a USB device claims to be an ATH9K but doesn't have the expected endpoints. (In this case there was an interrupt endpoint where the driver expected a bulk endpoint.) The kernel needs to be able to handle such devices without getting an internal error. usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 3 PID: 500 at drivers/usb/core/urb.c:493 usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493 Modules linked in: CPU: 3 PID: 500 Comm: kworker/3:2 Not tainted 5.10.135-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Workqueue: events request_firmware_work_func RIP: 0010:usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493 Call Trace: ath9k_hif_usb_alloc_rx_urbs drivers/net/wireless/ath/ath9k/hif_usb.c:908 [inline] ath9k_hif_usb_alloc_urbs+0x75e/0x1010 drivers/net/wireless/ath/ath9k/hif_usb.c:1019 ath9k_hif_usb_dev_init drivers/net/wireless/ath/ath9k/hif_usb.c:1109 [inline] ath9k_hif_usb_firmware_cb+0x142/0x530 drivers/net/wireless/ath/ath9k/hif_usb.c:1242 request_firmware_work_func+0x12e/0x240 drivers/base/firmware_loader/main.c:1097 process_one_work+0x9af/0x1600 kernel/workqueue.c:2279 worker_thread+0x61d/0x12f0 kernel/workqueue.c:2425 kthread+0x3b4/0x4a0 kernel/kthread.c:313 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:299 Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221008211532.74583-1-pchelkin@ispras.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18wifi: ath10k: Fix return value in ath10k_pci_init()Xiu Jianfeng1-8/+12
[ Upstream commit 2af7749047d8d6ad43feff69f555a13a6a6c2831 ] This driver is attempting to register to support two different buses. if either of these is successful then ath10k_pci_init() should return 0 so that hardware attached to the successful bus can be probed and supported. only if both of these are unsuccessful should ath10k_pci_init() return an errno. Fixes: 0b523ced9a3c ("ath10k: add basic skeleton to support ahb") Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221110061926.18163-1-xiujianfeng@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb()Fedor Pchelkin1-13/+15
[ Upstream commit dd95f2239fc846795fc926787c3ae0ca701c9840 ] It is possible that skb is freed in ath9k_htc_rx_msg(), then usb_submit_urb() fails and we try to free skb again. It causes use-after-free bug. Moreover, if alloc_skb() fails, urb->context becomes NULL but rx_buf is not freed and there can be a memory leak. The patch removes unnecessary nskb and makes skb processing more clear: it is supposed that ath9k_htc_rx_msg() either frees old skb or passes its managing to another callback function. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 3deff76095c4 ("ath9k_htc: Increase URB count for REG_IN pipe") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221008114917.21404-1-pchelkin@ispras.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs()Fedor Pchelkin1-4/+0
[ Upstream commit c2a94de38c74e86f49124ac14f093d6a5c377a90 ] Syzkaller reports a long-known leak of urbs in ath9k_hif_usb_dealloc_tx_urbs(). The cause of the leak is that usb_get_urb() is called but usb_free_urb() (or usb_put_urb()) is not called inside usb_kill_urb() as urb->dev or urb->ep fields have not been initialized and usb_kill_urb() returns immediately. The patch removes trying to kill urbs located in hif_dev->tx.tx_buf because hif_dev->tx.tx_buf is not supposed to contain urbs which are in pending state (the pending urbs are stored in hif_dev->tx.tx_pending). The tx.tx_lock is acquired so there should not be any changes in the list. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 03fb92a432ea ("ath9k: hif_usb: fix race condition between usb_get_urb() and usb_kill_anchored_urbs()") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220725151359.283704-1-pchelkin@ispras.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26wifi: ath9k: avoid uninit memory read in ath9k_htc_rx_msg()Tetsuo Handa1-15/+28
[ Upstream commit b383e8abed41cc6ff1a3b34de75df9397fa4878c ] syzbot is reporting uninit value at ath9k_htc_rx_msg() [1], for ioctl(USB_RAW_IOCTL_EP_WRITE) can call ath9k_hif_usb_rx_stream() with pkt_len = 0 but ath9k_hif_usb_rx_stream() uses __dev_alloc_skb(pkt_len + 32, GFP_ATOMIC) based on an assumption that pkt_len is valid. As a result, ath9k_hif_usb_rx_stream() allocates skb with uninitialized memory and ath9k_htc_rx_msg() is reading from uninitialized memory. Since bytes accessed by ath9k_htc_rx_msg() is not known until ath9k_htc_rx_msg() is called, it would be difficult to check minimal valid pkt_len at "if (pkt_len > 2 * MAX_RX_BUF_SIZE) {" line in ath9k_hif_usb_rx_stream(). We have two choices. One is to workaround by adding __GFP_ZERO so that ath9k_htc_rx_msg() sees 0 if pkt_len is invalid. The other is to let ath9k_htc_rx_msg() validate pkt_len before accessing. This patch chose the latter. Note that I'm not sure threshold condition is correct, for I can't find details on possible packet length used by this protocol. Link: https://syzkaller.appspot.com/bug?extid=2ca247c2d60c7023de7f [1] Reported-by: syzbot <syzbot+2ca247c2d60c7023de7f@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/7acfa1be-4b5c-b2ce-de43-95b0593fb3e5@I-love.SAKURA.ne.jp Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state()Wen Gong1-25/+29
[ Upstream commit f020d9570a04df0762a2ac5c50cf1d8c511c9164 ] When peer delete failed in a disconnect operation, use-after-free detected by KFENCE in below log. It is because for each vdev_id and address, it has only one struct ath10k_peer, it is allocated in ath10k_peer_map_event(). When connected to an AP, it has more than one HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the array peer_map of struct ath10k will be set muti-elements to the same ath10k_peer in ath10k_peer_map_event(). When peer delete failed in ath10k_sta_state(), the ath10k_peer will be free for the 1st peer id in array peer_map of struct ath10k, and then use-after-free happened for the 2nd peer id because they map to the same ath10k_peer. And clean up all peers in array peer_map for the ath10k_peer, then user-after-free disappeared peer map event log: [ 306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e [ 306.957187] ath10k_pci 0000:01:00.0: mac vdev 0 peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33 [ 306.957395] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 166 peer unmap event log: [ 435.715691] wlan0: deauthenticating from b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING) [ 435.716802] ath10k_pci 0000:01:00.0: mac vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone) [ 435.717177] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 435.717186] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 435.717193] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 166 use-after-free log: [21705.888627] wlan0: deauthenticating from d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING) [21713.799910] ath10k_pci 0000:01:00.0: failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110 [21713.799925] ath10k_pci 0000:01:00.0: found sta peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed [21713.799968] ================================================================== [21713.799991] BUG: KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.799991] [21713.799997] Use-after-free read at 0x00000000abe1c75e (in kfence-#69): [21713.800010] ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.800041] drv_sta_state+0x115/0x677 [mac80211] [21713.800059] __sta_info_destroy_part2+0xb1/0x133 [mac80211] [21713.800076] __sta_info_flush+0x11d/0x162 [mac80211] [21713.800093] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211] [21713.800110] ieee80211_mgd_deauth+0x26c/0x29b [mac80211] [21713.800137] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211] [21713.800153] nl80211_deauthenticate+0xf8/0x121 [cfg80211] [21713.800161] genl_rcv_msg+0x38e/0x3be [21713.800166] netlink_rcv_skb+0x89/0xf7 [21713.800171] genl_rcv+0x28/0x36 [21713.800176] netlink_unicast+0x179/0x24b [21713.800181] netlink_sendmsg+0x3a0/0x40e [21713.800187] sock_sendmsg+0x72/0x76 [21713.800192] ____sys_sendmsg+0x16d/0x1e3 [21713.800196] ___sys_sendmsg+0x95/0xd1 [21713.800200] __sys_sendmsg+0x85/0xbf [21713.800205] do_syscall_64+0x43/0x55 [21713.800210] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [21713.800213] [21713.800219] kfence-#69: 0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k [21713.800219] [21713.800224] allocated by task 13 on cpu 0 at 21705.501373s: [21713.800241] ath10k_peer_map_event+0x7e/0x154 [ath10k_core] [21713.800254] ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core] [21713.800265] ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core] [21713.800277] ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core] [21713.800283] ath10k_pci_process_rx_cb+0x195/0x1df [ath10k_pci] [21713.800294] ath10k_ce_per_engine_service+0x55/0x74 [ath10k_core] [21713.800305] ath10k_ce_per_engine_service_any+0x76/0x84 [ath10k_core] [21713.800310] ath10k_pci_napi_poll+0x49/0x144 [ath10k_pci] [21713.800316] net_rx_action+0xdc/0x361 [21713.800320] __do_softirq+0x163/0x29a [21713.800325] asm_call_irq_on_stack+0x12/0x20 [21713.800331] do_softirq_own_stack+0x3c/0x48 [21713.800337] __irq_exit_rcu+0x9b/0x9d [21713.800342] common_interrupt+0xc9/0x14d [21713.800346] asm_common_interrupt+0x1e/0x40 [21713.800351] ksoftirqd_should_run+0x5/0x16 [21713.800357] smpboot_thread_fn+0x148/0x211 [21713.800362] kthread+0x150/0x15f [21713.800367] ret_from_fork+0x22/0x30 [21713.800370] [21713.800374] freed by task 708 on cpu 1 at 21713.799953s: [21713.800498] ath10k_sta_state+0x2c6/0xb8a [ath10k_core] [21713.800515] drv_sta_state+0x115/0x677 [mac80211] [21713.800532] __sta_info_destroy_part2+0xb1/0x133 [mac80211] [21713.800548] __sta_info_flush+0x11d/0x162 [mac80211] [21713.800565] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211] [21713.800581] ieee80211_mgd_deauth+0x26c/0x29b [mac80211] [21713.800598] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211] [21713.800614] nl80211_deauthenticate+0xf8/0x121 [cfg80211] [21713.800619] genl_rcv_msg+0x38e/0x3be [21713.800623] netlink_rcv_skb+0x89/0xf7 [21713.800628] genl_rcv+0x28/0x36 [21713.800632] netlink_unicast+0x179/0x24b [21713.800637] netlink_sendmsg+0x3a0/0x40e [21713.800642] sock_sendmsg+0x72/0x76 [21713.800646] ____sys_sendmsg+0x16d/0x1e3 [21713.800651] ___sys_sendmsg+0x95/0xd1 [21713.800655] __sys_sendmsg+0x85/0xbf [21713.800659] do_syscall_64+0x43/0x55 [21713.800663] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1 Fixes: d0eeafad1189 ("ath10k: Clean up peer when sta goes away.") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220801141930.16794-1-quic_wgong@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25wifi: wil6210: debugfs: fix uninitialized variable use in `wil_write_file_wmi()`Ammar Faizi1-2/+2
[ Upstream commit d578e0af3a003736f6c440188b156483d451b329 ] Commit 7a4836560a61 changes simple_write_to_buffer() with memdup_user() but it forgets to change the value to be returned that came from simple_write_to_buffer() call. It results in the following warning: warning: variable 'rc' is uninitialized when used here [-Wuninitialized] return rc; ^~ Remove rc variable and just return the passed in length if the memdup_user() succeeds. Cc: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: kernel test robot <lkp@intel.com> Fixes: 7a4836560a6198d245d5732e26f94898b12eb760 ("wifi: wil6210: debugfs: fix info leak in wil_write_file_wmi()") Fixes: ff974e4083341383d3dd4079e52ed30f57f376f0 ("wil6210: debugfs interface to send raw WMI command") Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220724202452.61846-1-ammar.faizi@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25wifi: wil6210: debugfs: fix info leak in wil_write_file_wmi()Dan Carpenter1-10/+4
[ Upstream commit 7a4836560a6198d245d5732e26f94898b12eb760 ] The simple_write_to_buffer() function will succeed if even a single byte is initialized. However, we need to initialize the whole buffer to prevent information leaks. Just use memdup_user(). Fixes: ff974e408334 ("wil6210: debugfs interface to send raw WMI command") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/Ysg14NdKAZF/hcNG@kili Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25ath9k: fix use-after-free in ath9k_hif_usb_rx_cbPavel Skripkin2-6/+7
[ Upstream commit 0ac4827f78c7ffe8eef074bc010e7e34bc22f533 ] Syzbot reported use-after-free Read in ath9k_hif_usb_rx_cb() [0]. The problem was in incorrect htc_handle->drv_priv initialization. Probable call trace which can trigger use-after-free: ath9k_htc_probe_device() /* htc_handle->drv_priv = priv; */ ath9k_htc_wait_for_target() <--- Failed ieee80211_free_hw() <--- priv pointer is freed <IRQ> ... ath9k_hif_usb_rx_cb() ath9k_hif_usb_rx_stream() RX_STAT_INC() <--- htc_handle->drv_priv access In order to not add fancy protection for drv_priv we can move htc_handle->drv_priv initialization at the end of the ath9k_htc_probe_device() and add helper macro to make all *_STAT_* macros NULL safe, since syzbot has reported related NULL deref in that macros [1] Link: https://syzkaller.appspot.com/bug?id=6ead44e37afb6866ac0c7dd121b4ce07cb665f60 [0] Link: https://syzkaller.appspot.com/bug?id=b8101ffcec107c0567a0cd8acbbacec91e9ee8de [1] Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Reported-and-tested-by: syzbot+03110230a11411024147@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+c6dde1f690b60e0b9fbe@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/d57bbedc857950659bfacac0ab48790c1eda00c8.1655145743.git.paskripkin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14carl9170: tx: fix an incorrect use of list iteratorXiaomeng Tong1-0/+3
commit 54a6f29522da3c914da30e50721dedf51046449a upstream. If the previous list_for_each_entry_continue_rcu() don't exit early (no goto hit inside the loop), the iterator 'cvif' after the loop will be a bogus pointer to an invalid structure object containing the HEAD (&ar->vif_list). As a result, the use of 'cvif' after that will lead to a invalid memory access (i.e., 'cvif->id': the invalid pointer dereference when return back to/after the callsite in the carl9170_update_beacon()). The original intention should have been to return the valid 'cvif' when found in list, NULL otherwise. So just return NULL when no entry found, to fix this bug. Cc: stable@vger.kernel.org Fixes: 1f1d9654e183c ("carl9170: refactor carl9170_update_beacon") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220328122820.1004-1-xiam0nd.tong@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-14ath9k_htc: fix potential out of bounds access with invalid rxstatus->rs_keyixDan Carpenter1-0/+8
[ Upstream commit 2dc509305cf956381532792cb8dceef2b1504765 ] The "rxstatus->rs_keyix" eventually gets passed to test_bit() so we need to ensure that it is within the bitmap. drivers/net/wireless/ath/ath9k/common.c:46 ath9k_cmn_rx_accept() error: passing untrusted data 'rx_stats->rs_keyix' to 'test_bit()' Fixes: 4ed1a8d4a257 ("ath9k_htc: use ath9k_cmn_rx_accept") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220409061225.GA5447@kili Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14ath9k: fix ar9003_get_eepmiscWenli Looi1-1/+1
[ Upstream commit 9aaff3864b603408c02c629957ae8d8ff5d5a4f2 ] The current implementation is reading the wrong eeprom type. Fixes: d8ec2e2a63e8 ("ath9k: Add an eeprom_ops callback for retrieving the eepmisc value") Signed-off-by: Wenli Looi <wlooi@ucalgary.ca> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220320233010.123106-5-wlooi@ucalgary.ca Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14ath9k: fix QCA9561 PA bias levelThibaut VARÈNE1-1/+1
[ Upstream commit e999a5da28a0e0f7de242d841ef7d5e48f4646ae ] This patch fixes an invalid TX PA DC bias level on QCA9561, which results in a very low output power and very low throughput as devices are further away from the AP (compared to other 2.4GHz APs). This patch was suggested by Felix Fietkau, who noted[1]: "The value written to that register is wrong, because while the mask definition AR_CH0_TOP2_XPABIASLVL uses a different value for 9561, the shift definition AR_CH0_TOP2_XPABIASLVL_S is hardcoded to 12, which is wrong for 9561." In real life testing, without this patch the 2.4GHz throughput on Yuncore XD3200 is around 10Mbps sitting next to the AP, and closer to practical maximum with the patch applied. [1] https://lore.kernel.org/all/91c58969-c60e-2f41-00ac-737786d435ae@nbd.name Signed-off-by: Thibaut VARÈNE <hacks+kernel@slashdirt.org> Acked-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220417145145.1847-1-hacks+kernel@slashdirt.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111Zekun Shen1-0/+3
[ Upstream commit 564d4eceb97eaf381dd6ef6470b06377bb50c95a ] The bug was found during fuzzing. Stacktrace locates it in ath5k_eeprom_convert_pcal_info_5111. When none of the curve is selected in the loop, idx can go up to AR5K_EEPROM_N_PD_CURVES. The line makes pd out of bound. pd = &chinfo[pier].pd_curves[idx]; There are many OOB writes using pd later in the code. So I added a sanity check for idx. Checks for other loops involving AR5K_EEPROM_N_PD_CURVES are not needed as the loop index is not used outside the loops. The patch is NOT tested with real device. The following is the fuzzing report BUG: KASAN: slab-out-of-bounds in ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] Write of size 1 at addr ffff8880174a4d60 by task modprobe/214 CPU: 0 PID: 214 Comm: modprobe Not tainted 5.6.0 #1 Call Trace: dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] __kasan_report.cold+0x37/0x7c ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] kasan_report+0xe/0x20 ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] ? apic_timer_interrupt+0xa/0x20 ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k] ? ath5k_pci_eeprom_read+0x228/0x3c0 [ath5k] ath5k_eeprom_init+0x2513/0x6290 [ath5k] ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k] ? usleep_range+0xb8/0x100 ? apic_timer_interrupt+0xa/0x20 ? ath5k_eeprom_read_pcal_info_2413+0x2f20/0x2f20 [ath5k] ath5k_hw_init+0xb60/0x1970 [ath5k] ath5k_init_ah+0x6fe/0x2530 [ath5k] ? kasprintf+0xa6/0xe0 ? ath5k_stop+0x140/0x140 [ath5k] ? _dev_notice+0xf6/0xf6 ? apic_timer_interrupt+0xa/0x20 ath5k_pci_probe.cold+0x29a/0x3d6 [ath5k] ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k] ? mutex_lock+0x89/0xd0 ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k] local_pci_probe+0xd3/0x160 pci_device_probe+0x23f/0x3e0 ? pci_device_remove+0x280/0x280 ? pci_device_remove+0x280/0x280 really_probe+0x209/0x5d0 Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu> Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/YckvDdj3mtCkDRIt@a-10-27-26-18.dynapool.vpn.nyu.edu Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20ath9k_htc: fix uninit value bugsPavel Skripkin1-0/+5
[ Upstream commit d1e0df1c57bd30871dd1c855742a7c346dbca853 ] Syzbot reported 2 KMSAN bugs in ath9k. All of them are caused by missing field initialization. In htc_connect_service() svc_meta_len and pad are not initialized. Based on code it looks like in current skb there is no service data, so simply initialize svc_meta_len to 0. htc_issue_send() does not initialize htc_frame_hdr::control array. Based on firmware code, it will initialize it by itself, so simply zero whole array to make KMSAN happy Fail logs: BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline] hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479 htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline] htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275 ... Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1126 [inline] htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258 ... Bytes 4-7 of 18 are uninitialized Memory access of size 18 starts at ffff888027377e00 BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline] hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479 htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline] htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275 ... Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1126 [inline] htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258 ... Bytes 16-17 of 18 are uninitialized Memory access of size 18 starts at ffff888027377e00 Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Reported-by: syzbot+f83a1df1ed4f67e8d8ad@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220115122733.11160-1-paskripkin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20carl9170: fix missing bit-wise or operator for tx_paramsColin Ian King1-1/+1
commit 02a95374b5eebdbd3b6413fd7ddec151d2ea75a1 upstream. Currently tx_params is being re-assigned with a new value and the previous setting IEEE80211_HT_MCS_TX_RX_DIFF is being overwritten. The assignment operator is incorrect, the original intent was to bit-wise or the value in. Fix this by replacing the = operator with |= instead. Kudos to Christian Lamparter for suggesting the correct fix. Fixes: fe8ee9ad80b2 ("carl9170: mac80211 glue and command interface") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Cc: <Stable@vger.kernel.org> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220125004406.344422-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_streamZekun Shen1-0/+7
[ Upstream commit 6ce708f54cc8d73beca213cec66ede5ce100a781 ] Large pkt_len can lead to out-out-bound memcpy. Current ath9k_hif_usb_rx_stream allows combining the content of two urb inputs to one pkt. The first input can indicate the size of the pkt. Any remaining size is saved in hif_dev->rx_remain_len. While processing the next input, memcpy is used with rx_remain_len. 4-byte pkt_len can go up to 0xffff, while a single input is 0x4000 maximum in size (MAX_RX_BUF_SIZE). Thus, the patch adds a check for pkt_len which must not exceed 2 * MAX_RX_BUG_SIZE. BUG: KASAN: slab-out-of-bounds in ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] Read of size 46393 at addr ffff888018798000 by task kworker/0:1/23 CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.6.0 #63 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 Workqueue: events request_firmware_work_func Call Trace: <IRQ> dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] __kasan_report.cold+0x37/0x7c ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] kasan_report+0xe/0x20 check_memory_region+0x15a/0x1d0 memcpy+0x20/0x50 ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] ? hif_usb_mgmt_cb+0x2d9/0x2d9 [ath9k_htc] ? _raw_spin_lock_irqsave+0x7b/0xd0 ? _raw_spin_trylock_bh+0x120/0x120 ? __usb_unanchor_urb+0x12f/0x210 __usb_hcd_giveback_urb+0x1e4/0x380 usb_giveback_urb_bh+0x241/0x4f0 ? __hrtimer_run_queues+0x316/0x740 ? __usb_hcd_giveback_urb+0x380/0x380 tasklet_action_common.isra.0+0x135/0x330 __do_softirq+0x18c/0x634 irq_exit+0x114/0x140 smp_apic_timer_interrupt+0xde/0x380 apic_timer_interrupt+0xf/0x20 I found the bug using a custome USBFuzz port. It's a research work to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only, providing hand-crafted usb descriptors to QEMU. After fixing the value of pkt_tag to ATH_USB_RX_STREAM_MODE_TAG in QEMU emulation, I found the KASAN report. The bug is triggerable whenever pkt_len is above two MAX_RX_BUG_SIZE. I used the same input that crashes to test the driver works when applying the patch. Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/YXsidrRuK6zBJicZ@10-18-43-117.dynapool.wireless.nyu.edu Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ath10k: Fix tx hangingSebastian Gottschall2-2/+3
[ Upstream commit e8a91863eba3966a447d2daa1526082d52b5db2a ] While running stress tests in roaming scenarios (switching ap's every 5 seconds, we discovered a issue which leads to tx hangings of exactly 5 seconds while or after scanning for new accesspoints. We found out that this hanging is triggered by ath10k_mac_wait_tx_complete since the empty_tx_wq was not wake when the num_tx_pending counter reaches zero. To fix this, we simply move the wake_up call to htt_tx_dec_pending, since this call was missed on several locations within the ath10k code. Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20210505085806.11474-1-s.gottschall@dd-wrt.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ar5523: Fix null-ptr-deref with unexpected WDCMSG_TARGET_START replyZekun Shen1-0/+4
[ Upstream commit ae80b6033834342601e99f74f6a62ff5092b1cee ] Unexpected WDCMSG_TARGET_START replay can lead to null-ptr-deref when ar->tx_cmd->odata is NULL. The patch adds a null check to prevent such case. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] ar5523_cmd+0x46a/0x581 [ar5523] ar5523_probe.cold+0x1b7/0x18da [ar5523] ? ar5523_cmd_rx_cb+0x7a0/0x7a0 [ar5523] ? __pm_runtime_set_status+0x54a/0x8f0 ? _raw_spin_trylock_bh+0x120/0x120 ? pm_runtime_barrier+0x220/0x220 ? __pm_runtime_resume+0xb1/0xf0 usb_probe_interface+0x25b/0x710 really_probe+0x209/0x5d0 driver_probe_device+0xc6/0x1b0 device_driver_attach+0xe2/0x120 I found the bug using a custome USBFuzz port. It's a research work to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only, providing hand-crafted usb descriptors to QEMU. After fixing the code (fourth byte in usb packet) to WDCMSG_TARGET_START, I got the null-ptr-deref bug. I believe the bug is triggerable whenever cmd->odata is NULL. After patching, I tested with the same input and no longer see the KASAN report. This was NOT tested on a real device. Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YXsmPQ3awHFLuAj2@10-18-43-117.dynapool.wireless.nyu.edu Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27wcn36xx: Indicate beacon not connection loss on MISSED_BEACON_INDBryan O'Donoghue1-2/+2
[ Upstream commit 588b45c88ae130fe373a8c50edaf54735c3f4fe3 ] Firmware can trigger a missed beacon indication, this is not the same as a lost signal. Flag to Linux the missed beacon and let the WiFi stack decide for itself if the link is up or down by sending its own probe to determine this. We should only be signalling the link is lost when the firmware indicates Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211027232529.657764-1-bryan.odonoghue@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ath10k: fix max antenna gain unitSven Eckelmann2-3/+6
[ Upstream commit 0a491167fe0cf9f26062462de2a8688b96125d48 ] Most of the txpower for the ath10k firmware is stored as twicepower (0.5 dB steps). This isn't the case for max_antenna_gain - which is still expected by the firmware as dB. The firmware is converting it from dB to the internal (twicepower) representation when it calculates the limits of a channel. This can be seen in tpc_stats when configuring "12" as max_antenna_gain. Instead of the expected 12 (6 dB), the tpc_stats shows 24 (12 dB). Tested on QCA9888 and IPQ4019 with firmware 10.4-3.5.3-00057. Fixes: 02256930d9b8 ("ath10k: use proper tx power unit") Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20190611172131.6064-1-sven@narfation.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ath9k: Fix potential interrupt storm on queue resetLinus Lüssing1-1/+3
[ Upstream commit 4925642d541278575ad1948c5924d71ffd57ef14 ] In tests with two Lima boards from 8devices (QCA4531 based) on OpenWrt 19.07 we could force a silent restart of a device with no serial output when we were sending a high amount of UDP traffic (iperf3 at 80 MBit/s in both directions from external hosts, saturating the wifi and causing a load of about 4.5 to 6) and were then triggering an ath9k_queue_reset(). Further debugging showed that the restart was caused by the ath79 watchdog. With disabled watchdog we could observe that the device was constantly going into ath_isr() interrupt handler and was returning early after the ATH_OP_HW_RESET flag test, without clearing any interrupts. Even though ath9k_queue_reset() calls ath9k_hw_kill_interrupts(). With JTAG we could observe the following race condition: 1) ath9k_queue_reset() ... -> ath9k_hw_kill_interrupts() -> set_bit(ATH_OP_HW_RESET, &common->op_flags); ... <- returns 2) ath9k_tasklet() ... -> ath9k_hw_resume_interrupts() ... <- returns 3) loops around: ... handle_int() -> ath_isr() ... -> if (test_bit(ATH_OP_HW_RESET, &common->op_flags)) return IRQ_HANDLED; x) ath_reset_internal(): => never reached <= And in ath_isr() we would typically see the following interrupts / interrupt causes: * status: 0x00111030 or 0x00110030 * async_cause: 2 (AR_INTR_MAC_IPQ) * sync_cause: 0 So the ath9k_tasklet() reenables the ath9k interrupts through ath9k_hw_resume_interrupts() which ath9k_queue_reset() had just disabled. And ath_isr() then keeps firing because it returns IRQ_HANDLED without actually clearing the interrupt. To fix this IRQ storm also clear/disable the interrupts again when we are in reset state. Cc: Sven Eckelmann <sven@narfation.org> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Linus Lüssing <linus.luessing@c0d3.blue> Fixes: 872b5d814f99 ("ath9k: do not access hardware on IRQs during reset") Signed-off-by: Linus Lüssing <ll@simonwunderlich.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210914192515.9273-3-linus.luessing@c0d3.blue Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ath: dfs_pattern_detector: Fix possible null-pointer dereference in ↵Tuo Li1-4/+6
channel_detector_create() [ Upstream commit 4b6012a7830b813799a7faf40daa02a837e0fd5b ] kzalloc() is used to allocate memory for cd->detectors, and if it fails, channel_detector_exit() behind the label fail will be called: channel_detector_exit(dpd, cd); In channel_detector_exit(), cd->detectors is dereferenced through: struct pri_detector *de = cd->detectors[i]; To fix this possible null-pointer dereference, check cd->detectors before the for loop to dereference cd->detectors. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Tuo Li <islituo@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210805153854.154066-1-islituo@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26wcn36xx: handle connection loss indicationBenjamin Li1-11/+33
commit d6dbce453b19c64b96f3e927b10230f9a704b504 upstream. Firmware sends delete_sta_context_ind when it detects the AP has gone away in STA mode. Right now the handler for that indication only handles AP mode; fix it to also handle STA mode. Cc: stable@vger.kernel.org Signed-off-by: Benjamin Li <benl@squareup.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210901180606.11686-1-benl@squareup.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26wcn36xx: Fix HT40 capability for 2Ghz bandLoic Poulain1-1/+3
commit 960ae77f25631bbe4e3aafefe209b52e044baf31 upstream. All wcn36xx controllers are supposed to support HT40 (and SGI40), This doubles the maximum bitrate/throughput with compatible APs. Tested with wcn3620 & wcn3680B. Cc: stable@vger.kernel.org Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware") Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1634737133-22336-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26ath10k: fix division by zero in send pathJohan Hovold1-0/+5
commit a006acb931317aad3a8dd41333ebb0453caf49b8 upstream. Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in ath10k_usb_hif_tx_sg() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 4db66499df91 ("ath10k: add initial USB support") Cc: stable@vger.kernel.org # 4.14 Cc: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211027080819.6675-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26ath10k: fix control-message timeoutJohan Hovold1-1/+1
commit 5286132324230168d3fab6ffc16bfd7de85bdfb4 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 4db66499df91 ("ath10k: add initial USB support") Cc: stable@vger.kernel.org # 4.14 Cc: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211025120522.6045-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26ath6kl: fix control-message timeoutJohan Hovold1-1/+1
commit a066d28a7e729f808a3e6eff22e70c003091544e upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 241b128b6b69 ("ath6kl: add back beginnings of USB support") Cc: stable@vger.kernel.org # 3.4 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211025120522.6045-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26ath6kl: fix division by zero in send pathJohan Hovold1-0/+5
commit c1b9ca365deae667192be9fe24db244919971234 upstream. Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in ath10k_usb_hif_tx_sg() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 9cbee358687e ("ath6kl: add full USB support") Cc: stable@vger.kernel.org # 3.5 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211027080819.6675-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22ath9k: fix sleeping in atomic contextMiaoqing Pan1-5/+7
[ Upstream commit 7c48662b9d56666219f526a71ace8c15e6e12f1f ] The problem is that gpio_free() can sleep and the cfg_soc() can be called with spinlocks held. One problematic call tree is: --> ath_reset_internal() takes &sc->sc_pcu_lock spin lock --> ath9k_hw_reset() --> ath9k_hw_gpio_request_in() --> ath9k_hw_gpio_request() --> ath9k_hw_gpio_cfg_soc() Remove gpio_free(), use error message instead, so we should make sure there is no GPIO conflict. Also remove ath9k_hw_gpio_free() from ath9k_hw_apply_gpio_override(), as gpio_mask will never be set for SOC chips. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1628481916-15030-1-git-send-email-miaoqing@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22ath9k: fix OOB read ar9300_eeprom_restore_internalZekun Shen1-1/+2
[ Upstream commit 23151b9ae79e3bc4f6a0c4cd3a7f355f68dad128 ] Bad header can have large length field which can cause OOB. cptr is the last bytes for read, and the eeprom is parsed from high to low address. The OOB, triggered by the condition length > cptr could cause memory error with a read on negative index. There are some sanity check around length, but it is not compared with cptr (the remaining bytes). Here, the corrupted/bad EEPROM can cause panic. I was able to reproduce the crash, but I cannot find the log and the reproducer now. After I applied the patch, the bug is no longer reproducible. Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YM3xKsQJ0Hw2hjrc@Zekuns-MBP-16.fios-router.home Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22ath6kl: wmi: fix an error code in ath6kl_wmi_sync_point()Dan Carpenter1-1/+3
[ Upstream commit fd6729ec534cffbbeb3917761e6d1fe6a412d3fe ] This error path is unlikely because of it checked for NULL and returned -ENOMEM earlier in the function. But it should return an error code here as well if we ever do hit it because of a race condition or something. Fixes: bdcd81707973 ("Add ath6kl cleaned up driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210813113438.GB30697@kili Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22ath10k: fix recent bandwidth conversion bugChristian Lamparter1-18/+24
commit 91493e8e10f0f495b04a5c32096d56ea1f254c93 upstream. The commit "cfg80211: make RATE_INFO_BW_20 the default" changed the index of RATE_INFO_BW_20, but the updates to ath10k missed the special bandwidth calculation case in ath10k_update_per_peer_tx_stats(). This will fix below warning, WARNING: CPU: 0 PID: 609 at net/wireless/util.c:1254 cfg80211_calculate_bitrate+0x174/0x220 invalid rate bw=1, mcs=9, nss=2 (unwind_backtrace) from (cfg80211_calculate_bitrate+0x174/0x220) (cfg80211_calculate_bitrate) from (nl80211_put_sta_rate+0x44/0x1dc)from (nl80211_put_sta_rate) from (nl80211_send_station+0x388/0xaf0) (nl80211_get_station+0xa8/0xec) [ end trace da8257d6a850e91a ] Fixes: 842be75c77cb ("cfg80211: make RATE_INFO_BW_20 the default") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26ath9k: Postpone key cache entry deletion for TXQ frames reference itJouni Malinen2-1/+87
commit ca2848022c12789685d3fab3227df02b863f9696 upstream. Do not delete a key cache entry that is still being referenced by pending frames in TXQs. This avoids reuse of the key cache entry while a frame might still be transmitted using it. To avoid having to do any additional operations during the main TX path operations, track pending key cache entries in a new bitmap and check whether any pending entries can be deleted before every new key add/remove operation. Also clear any remaining entries when stopping the interface. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-6-jouni@codeaurora.org Cc: Pali Rohár <pali@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26ath: Modify ath_key_delete() to not need full key entryJouni Malinen5-23/+22
commit 144cd24dbc36650a51f7fe3bf1424a1432f1f480 upstream. tkip_keymap can be used internally to avoid the reference to key->cipher and with this, only the key index value itself is needed. This allows ath_key_delete() call to be postponed to be handled after the upper layer STA and key entry have already been removed. This is needed to make ath9k key cache management safer. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-5-jouni@codeaurora.org Cc: Pali Rohár <pali@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26ath: Export ath_hw_keysetmac()Jouni Malinen2-2/+3
commit d2d3e36498dd8e0c83ea99861fac5cf9e8671226 upstream. ath9k is going to use this for safer management of key cache entries. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-4-jouni@codeaurora.org Cc: Pali Rohár <pali@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26ath9k: Clear key cache explicitly on disabling hardwareJouni Malinen1-0/+5
commit 73488cb2fa3bb1ef9f6cf0d757f76958bd4deaca upstream. Now that ath/key.c may not be explicitly clearing keys from the key cache, clear all key cache entries when disabling hardware to make sure no keys are left behind beyond this point. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-3-jouni@codeaurora.org Cc: Pali Rohár <pali@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26ath: Use safer key clearing with key cache entriesJouni Malinen1-1/+10
commit 56c5485c9e444c2e85e11694b6c44f1338fc20fd upstream. It is possible for there to be pending frames in TXQs with a reference to the key cache entry that is being deleted. If such a key cache entry is cleared, those pending frame in TXQ might get transmitted without proper encryption. It is safer to leave the previously used key into the key cache in such cases. Instead, only clear the MAC address to prevent RX processing from using this key cache entry. This is needed in particularly in AP mode where the TXQs cannot be flushed on station disconnection. This change alone may not be able to address all cases where the key cache entry might get reused for other purposes immediately (the key cache entry should be released for reuse only once the TXQs do not have any remaining references to them), but this makes it less likely to get unprotected frames and the more complete changes may end up being significantly more complex. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-2-jouni@codeaurora.org Cc: Pali Rohár <pali@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20ath10k: Fix an error code in ath10k_add_interface()Yang Li1-0/+1
[ Upstream commit e9ca70c735ce66fc6a0e02c8b6958434f74ef8de ] When the code execute this if statement, the value of ret is 0. However, we can see from the ath10k_warn() log that the value of ret should be -EINVAL. Clean up smatch warning: drivers/net/wireless/ath/ath10k/mac.c:5596 ath10k_add_interface() warn: missing error code 'ret' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: ccec9038c721 ("ath10k: enable raw encap mode and software crypto engine") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1621939577-62218-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20wireless: carl9170: fix LEDS build errors & warningsRandy Dunlap1-5/+3
[ Upstream commit 272fdc0c4542fad173b44965be02a16d6db95499 ] kernel test robot reports over 200 build errors and warnings that are due to this Kconfig problem when CARL9170=m, MAC80211=y, and LEDS_CLASS=m. WARNING: unmet direct dependencies detected for MAC80211_LEDS Depends on [n]: NET [=y] && WIRELESS [=y] && MAC80211 [=y] && (LEDS_CLASS [=m]=y || LEDS_CLASS [=m]=MAC80211 [=y]) Selected by [m]: - CARL9170_LEDS [=y] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_ATH [=y] && CARL9170 [=m] CARL9170_LEDS selects MAC80211_LEDS even though its kconfig dependencies are not met. This happens because 'select' does not follow any Kconfig dependency chains. Fix this by making CARL9170_LEDS depend on MAC80211_LEDS, where the latter supplies any needed dependencies on LEDS_CLASS. Fixes: 1d7e1e6b1b8ed ("carl9170: Makefile, Kconfig files and MAINTAINERS") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: linux-wireless@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Suggested-by: Christian Lamparter <chunkeey@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210530031134.23274-1-rdunlap@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20ath9k: Fix kernel NULL pointer dereference during ath_reset_internal()Pali Rohár1-0/+5
commit fb312ac5ccb007e843f982b38d4d6886ba4b32f2 upstream. I got this crash more times during debugging of PCIe controller and crash happens somehow at the time when PCIe kernel code started link retraining (as part of ASPM code) when at the same time PCIe link went down and ath9k probably executed hw reset procedure. Currently I'm not able to reproduce this issue as it looks like to be some race condition between link training, ASPM, link down and reset path. And as always, race conditions which depends on more input parameters are hard to reproduce as it depends on precise timings. But it is clear that pointers are zero in this case and should be properly filled as same code pattern is used in ath9k_stop() function. Anyway I was able to reproduce this crash by manually triggering ath reset worker prior putting card up. I created simple patch to export reset functionality via debugfs and use it to "simulate" of triggering reset. s proved that NULL-pointer dereference issue is there. Function ath9k_hw_reset() is dereferencing chan structure pointer, so it needs to be non-NULL pointer. Function ath9k_stop() already contains code which sets ah->curchan to valid non-NULL pointer prior calling ath9k_hw_reset() function. Add same code pattern also into ath_reset_internal() function to prevent kernel NULL pointer dereference in ath9k_hw_reset() function. This change fixes kernel NULL pointer dereference in ath9k_hw_reset() which is caused by calling ath9k_hw_reset() from ath_reset_internal() with NULL chan structure. [ 45.334305] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 45.344417] Mem abort info: [ 45.347301] ESR = 0x96000005 [ 45.350448] EC = 0x25: DABT (current EL), IL = 32 bits [ 45.356166] SET = 0, FnV = 0 [ 45.359350] EA = 0, S1PTW = 0 [ 45.362596] Data abort info: [ 45.365756] ISV = 0, ISS = 0x00000005 [ 45.369735] CM = 0, WnR = 0 [ 45.372814] user pgtable: 4k pages, 39-bit VAs, pgdp=000000000685d000 [ 45.379663] [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 45.388856] Internal error: Oops: 96000005 [#1] SMP [ 45.393897] Modules linked in: ath9k ath9k_common ath9k_hw [ 45.399574] CPU: 1 PID: 309 Comm: kworker/u4:2 Not tainted 5.12.0-rc2-dirty #785 [ 45.414746] Workqueue: phy0 ath_reset_work [ath9k] [ 45.419713] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 45.425910] pc : ath9k_hw_reset+0xc4/0x1c48 [ath9k_hw] [ 45.431234] lr : ath9k_hw_reset+0xc0/0x1c48 [ath9k_hw] [ 45.436548] sp : ffffffc0118dbca0 [ 45.439961] x29: ffffffc0118dbca0 x28: 0000000000000000 [ 45.445442] x27: ffffff800dee4080 x26: 0000000000000000 [ 45.450923] x25: ffffff800df9b9d8 x24: 0000000000000000 [ 45.456404] x23: ffffffc0115f6000 x22: ffffffc008d0d408 [ 45.461885] x21: ffffff800dee5080 x20: ffffff800df9b9d8 [ 45.467366] x19: 0000000000000000 x18: 0000000000000000 [ 45.472846] x17: 0000000000000000 x16: 0000000000000000 [ 45.478326] x15: 0000000000000010 x14: ffffffffffffffff [ 45.483807] x13: ffffffc0918db94f x12: ffffffc011498720 [ 45.489289] x11: 0000000000000003 x10: ffffffc0114806e0 [ 45.494770] x9 : ffffffc01014b2ec x8 : 0000000000017fe8 [ 45.500251] x7 : c0000000ffffefff x6 : 0000000000000001 [ 45.505733] x5 : 0000000000000000 x4 : 0000000000000000 [ 45.511213] x3 : 0000000000000000 x2 : ffffff801fece870 [ 45.516693] x1 : ffffffc00eded000 x0 : 000000000000003f [ 45.522174] Call trace: [ 45.524695] ath9k_hw_reset+0xc4/0x1c48 [ath9k_hw] [ 45.529653] ath_reset_internal+0x1a8/0x2b8 [ath9k] [ 45.534696] ath_reset_work+0x2c/0x40 [ath9k] [ 45.539198] process_one_work+0x210/0x480 [ 45.543339] worker_thread+0x5c/0x510 [ 45.547115] kthread+0x12c/0x130 [ 45.550445] ret_from_fork+0x10/0x1c [ 45.554138] Code: 910922c2 9117e021 95ff0398 b4000294 (b9400a61) [ 45.560430] ---[ end trace 566410ba90b50e8b ]--- [ 45.565193] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 45.572282] SMP: stopping secondary CPUs [ 45.576331] Kernel Offset: disabled [ 45.579924] CPU features: 0x00040002,0000200c [ 45.584416] Memory Limit: none [ 45.587564] Rebooting in 3 seconds.. Signed-off-by: Pali Rohár <pali@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210402122653.24014-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-03ath10k: Validate first subframe of A-MSDU before processing the listSriram R1-4/+57
commit 62a8ff67eba52dae9b107e1fb8827054ed00a265 upstream. In certain scenarios a normal MSDU can be received as an A-MSDU when the A-MSDU present bit of a QoS header gets flipped during reception. Since this bit is unauthenticated, the hardware crypto engine can pass the frame to the driver without any error indication. This could result in processing unintended subframes collected in the A-MSDU list. Hence, validate A-MSDU list by checking if the first frame has a valid subframe header. Comparing the non-aggregated MSDU and an A-MSDU, the fields of the first subframe DA matches the LLC/SNAP header fields of a normal MSDU. In order to avoid processing such frames, add a validation to filter such A-MSDU frames where the first subframe header DA matches with the LLC/SNAP header pattern. Tested-on: QCA9984 hw1.0 PCI 10.4-3.10-00047 Cc: stable@vger.kernel.org Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20210511200110.e6f5eb7b9847.I38a77ae26096862527a5eab73caebd7346af8b66@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22ath9k: Fix error check in ath9k_hw_read_revisions() for PCI devicesToke Høiland-Jørgensen2-2/+2
[ Upstream commit 7dd9a40fd6e0d0f1fd8e1931c007e080801dfdce ] When the error check in ath9k_hw_read_revisions() was added, it checked for -EIO which is what ath9k_regread() in the ath9k_htc driver uses. However, for plain ath9k, the register read function uses ioread32(), which just returns -1 on error. So if such a read fails, it still gets passed through and ends up as a weird mac revision in the log output. Fix this by changing ath9k_regread() to return -1 on error like ioread32() does, and fix the error check to look for that instead of -EIO. Fixes: 2f90c7e5d094 ("ath9k: Check for errors when reading SREV register") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210326180819.142480-1-toke@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-17ath9k: fix transmitting to stations in dynamic SMPS modeFelix Fietkau2-1/+8
commit 3b9ea7206d7e1fdd7419cbd10badd3b2c80d04b4 upstream. When transmitting to a receiver in dynamic SMPS mode, all transmissions that use multiple spatial streams need to be sent using CTS-to-self or RTS/CTS to give the receiver's extra chains some time to wake up. This fixes the tx rate getting stuck at <= MCS7 for some clients, especially Intel ones, which make aggressive use of SMPS. Cc: stable@vger.kernel.org Reported-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210214184911.96702-1-nbd@nbd.name Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07ath10k: fix wmi mgmt tx queue full due to race conditionMiaoqing Pan1-11/+4
[ Upstream commit b55379e343a3472c35f4a1245906db5158cab453 ] Failed to transmit wmi management frames: [84977.840894] ath10k_snoc a000000.wifi: wmi mgmt tx queue is full [84977.840913] ath10k_snoc a000000.wifi: failed to transmit packet, dropping: -28 [84977.840924] ath10k_snoc a000000.wifi: failed to submit frame: -28 [84977.840932] ath10k_snoc a000000.wifi: failed to transmit frame: -28 This issue is caused by race condition between skb_dequeue and __skb_queue_tail. The queue of ‘wmi_mgmt_tx_queue’ is protected by a different lock: ar->data_lock vs list->lock, the result is no protection. So when ath10k_mgmt_over_wmi_tx_work() and ath10k_mac_tx_wmi_mgmt() running concurrently on different CPUs, there appear to be a rare corner cases when the queue length is 1, CPUx (skb_deuque) CPUy (__skb_queue_tail) next=list prev=list struct sk_buff *skb = skb_peek(list); WRITE_ONCE(newsk->next, next); WRITE_ONCE(list->qlen, list->qlen - 1);WRITE_ONCE(newsk->prev, prev); next = skb->next; WRITE_ONCE(next->prev, newsk); prev = skb->prev; WRITE_ONCE(prev->next, newsk); skb->next = skb->prev = NULL; list->qlen++; WRITE_ONCE(next->prev, prev); WRITE_ONCE(prev->next, next); If the instruction ‘next = skb->next’ is executed before ‘WRITE_ONCE(prev->next, newsk)’, newsk will be lost, as CPUx get the old ‘next’ pointer, but the length is still added by one. The final result is the length of the queue will reach the maximum value but the queue is empty. So remove ar->data_lock, and use 'skb_queue_tail' instead of '__skb_queue_tail' to prevent the potential race condition. Also switch to use skb_queue_len_lockless, in case we queue a few SKBs simultaneously. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1.c2-00033-QCAHLSWMTPLZ-1 Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608618887-8857-1-git-send-email-miaoqing@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-03ath9k: fix data bus crash when setting nf_override via debugfsLinus Lüssing1-1/+4
[ Upstream commit 12c8f3d1cdd84f01ee777b756db9dddc1f1c9d17 ] When trying to set the noise floor via debugfs, a "data bus error" crash like the following can happen: [ 88.433133] Data bus error, epc == 80221c28, ra == 83314e60 [ 88.438895] Oops[#1]: [ 88.441246] CPU: 0 PID: 7263 Comm: sh Not tainted 4.14.195 #0 [ 88.447174] task: 838a1c20 task.stack: 82d5e000 [ 88.451847] $ 0 : 00000000 00000030 deadc0de 83141de4 [ 88.457248] $ 4 : b810a2c4 0000a2c4 83230fd4 00000000 [ 88.462652] $ 8 : 0000000a 00000000 00000001 00000000 [ 88.468055] $12 : 7f8ef318 00000000 00000000 77f802a0 [ 88.473457] $16 : 83230080 00000002 0000001b 83230080 [ 88.478861] $20 : 83a1c3f8 00841000 77f7adb0 ffffff92 [ 88.484263] $24 : 00000fa4 77edd860 [ 88.489665] $28 : 82d5e000 82d5fda8 00000000 83314e60 [ 88.495070] Hi : 00000000 [ 88.498044] Lo : 00000000 [ 88.501040] epc : 80221c28 ioread32+0x8/0x10 [ 88.505671] ra : 83314e60 ath9k_hw_loadnf+0x88/0x520 [ath9k_hw] [ 88.512049] Status: 1000fc03 KERNEL EXL IE [ 88.516369] Cause : 5080801c (ExcCode 07) [ 88.520508] PrId : 00019374 (MIPS 24Kc) [ 88.524556] Modules linked in: ath9k ath9k_common pppoe ppp_async l2tp_ppp cdc_mbim batman_adv ath9k_hw ath sr9700 smsc95xx sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_conntrack_ipv6 mcs7830 mac80211 kalmia iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm ftdi_sio dm9601 cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CLASSIFY usbserial usbnet usbhid slhc rtl8150 r8152 pegasus nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack [ 88.597894] libcrc32c kaweth iptable_mangle iptable_filter ipt_ECN ipheth ip_tables hso hid_generic crc_ccitt compat cdc_wdm cdc_acm br_netfilter hid evdev input_core nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_beet ipcomp6 xfrm6_tunnel esp6 ah6 xfrm4_tunnel xfrm4_mode_tunnel xfrm4_mode_transport xfrm4_mode_beet ipcomp esp4 ah4 tunnel6 tunnel4 tun xfrm_user xfrm_ipcomp af_key xfrm_algo sha256_generic sha1_generic jitterentropy_rng drbg md5 hmac echainiv des_generic deflate zlib_inflate zlib_deflate cbc authenc crypto_acompress ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc16 mii aead crypto_null cryptomgr crc32c_generic [ 88.671671] crypto_hash [ 88.674292] Process sh (pid: 7263, threadinfo=82d5e000, task=838a1c20, tls=77f81efc) [ 88.682279] Stack : 00008060 00000008 00000200 00000000 00000000 00000000 00000000 00000002 [ 88.690916] 80500000 83230080 82d5fe22 00841000 77f7adb0 00000000 00000000 83156858 [ 88.699553] 00000000 8352fa00 83ad62b0 835302a8 00000000 300a00f8 00000003 82d5fe38 [ 88.708190] 82d5fef4 00000001 77f54dc4 77f80000 77f7adb0 c79fe901 00000000 00000000 [ 88.716828] 80510000 00000002 00841000 77f54dc4 77f80000 801ce4cc 0000000b 41824292 [ 88.725465] ... [ 88.727994] Call Trace: [ 88.730532] [<80221c28>] ioread32+0x8/0x10 [ 88.734765] Code: 00000000 8c820000 0000000f <03e00008> 00000000 08088708 00000000 aca40000 03e00008 [ 88.744846] [ 88.746464] ---[ end trace db226b2de1b69b9e ]--- [ 88.753477] Kernel panic - not syncing: Fatal exception [ 88.759981] Rebooting in 3 seconds.. The "REG_READ(ah, AR_PHY_AGC_CONTROL)" in ath9k_hw_loadnf() does not like being called when the hardware is asleep, leading to this crash. The easiest way to reproduce this is trying to set nf_override while the hardware is down: $ ip link set down dev wlan0 $ echo "-85" > /sys/kernel/debug/ieee80211/phy0/ath9k/nf_override Fixing this crash by waking the hardware up before trying to set the noise floor. Similar to what other ath9k debugfs files do. Tested on a Lima board from 8devices, which has a QCA 4531 chipset. Fixes: b90189759a7f ("ath9k: add noise floor override option") Cc: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <ll@simonwunderlich.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209184352.4272-1-linus.luessing@c0d3.blue Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-17wil6210: select CONFIG_CRC32Arnd Bergmann1-0/+1
commit e186620d7bf11b274b985b839c38266d7918cc05 upstream. Without crc32, the driver fails to link: arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o: in function `wil_fw_verify': fw.c:(.text+0x74c): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o:fw.c:(.text+0x758): more undefined references to `crc32_le' follow Fixes: 151a9706503f ("wil6210: firmware download") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 11:36:42 +0300