summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/wil6210
AgeCommit message (Collapse)AuthorFilesLines
2014-05-30wil6210: improve debug for WMI receiveVladimir Kondratiev1-7/+17
Print message if no events received. This should not happen. If it is, it points to the problem in firmware. Track also cases when multiple events processed in one IRQ Print information as soon as possible - mbox pointers and event header right after reading it. This helps to identify potential problem with memory allocation for the event buffer. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29wil6210: optimize wil_release_reorder_framesVladimir Kondratiev1-1/+8
In case of receiving frame with sequence number far greater than current, wil_release_reorder_frames() will iterate many times over empty buffer. Optimize this case by checking buffer emptiness and simply update head_seq_num without iterating. Suggested-by: Vladimir Shulman <Vladimir.Shulman@Wilocity.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29wil6210: improve pointers printingVladimir Kondratiev3-7/+7
use proper format %pad for the dma_addr_t arguments; prefix %p with 0x, as %p don't print is by itself Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29wil6210: detect scan timeoutsVladimir Kondratiev4-0/+17
If scan has not finished in some reasonable time (10sec), interpret it as if firmware error occurs but was not reported. Firmware should report scan completion for every scan request, so it is error condition indeed. Perform firmware recovery procedure. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29wil6210: inline functions for vring hi/lo watermarksVladimir Kondratiev1-2/+18
Provide clear definition of the watermarks for the vring descriptor space. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29wil6210: limit fw error recovery attemptsVladimir Kondratiev2-1/+25
In case there is something fundamentally wrong with the firmware (example: RF cable disconnected), FW will always crash immediately after reset. This leads to infinite fw error recovery loop. Count consecutive unsuccessful error recovery attempts in a short period of time, and stop doing recovery after some reasonable count. It is still possible to manually reset fw doing interface down/up sequence. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29wil6210: limit MTUVladimir Kondratiev1-0/+14
Obey 802.11 spec that defines max. data size 7920 bytes Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville3-5/+5
2014-05-19cfg80211: constify MAC addresses in cfg80211 opsJohannes Berg3-5/+5
This propagates through all the drivers and mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-22wil6210: Use larger Tx ringsVladimir Kondratiev1-1/+1
When using scatter-gather, more descriptor entries get used. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22wil6210: relaxed check for BACK start sequenceVladimir Kondratiev2-0/+18
Sometimes, due to the race between Rx path and WMI_BA_STATUS_EVENTID WMI event, few frames may be passed to the stack before reorder buffer allocated. Then, after BACK establishment, it start getting frames with sequence number ahead of SSN, and it get interpreted as missing frames. Then, BACK mechanism will wait for missing frames; data traffic will be stopped. In case of interface configured for DHCP, this data delay causes DHCP failure. Relax checking for sequence number; use sequence of 1-st frame handled by the buffer as SSN for this buffer. This is work-around, real fix should be done when proper BACK mechanism implemented. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22wil6210: sync with the latest FW APIVladimir Kondratiev2-20/+33
- add pcp_max_assoc_sta to the struct wmi_pcp_start_cmd - enum for the scan ststus Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22wil6210: fix printouts for better readabilityVladimir Kondratiev4-9/+7
Reshuffle prints to consolidate firmware/hardware information report upon card init Convert print for unhandled MISC ISR bits to "debug" - it is normal situation and not an "error" Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-21Merge branch 'master' of ↵John W. Linville9-140/+454
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-03-17wil6210: fix race between disconnect and Tx NAPIVladimir Kondratiev6-4/+47
When disconnecting some CID, corresponded Tx vring get released. During vring release, all descriptors get freed. It is possible that Tx NAPI working on the same vring simultaneously. If it happens, descriptor may be double freed. To protect from the race above, make sure NAPI won't process the same vring. Introduce 'enabled' flag in the struct vring_tx_data. Proceed with Tx NAPI only if 'enabled' flag set. Prior to Tx vring release, clear this flag and make sure NAPI get synchronized. NAPI enablement status protected by wil->mutex, add protection where it was missing and check for it. During reset, disconnect all peers first, then proceed with the Rx vring. It allows for the disconnect flow to observe proper 'wil->status' and correctly notify cfg80211 about connection status change Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: add memory barriers for the reset flowVladimir Kondratiev1-0/+6
make sure reset flow executed in order Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: target reset flow updateVladimir Kondratiev2-6/+8
Use 'real' indication for hardware state. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: use GROVladimir Kondratiev2-8/+8
GRO is easy to enable when already using NAPI framework, and it improves CPU utilisation. Enable it by default. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: serialize fw_recovery and start_apVladimir Kondratiev2-4/+13
These methods can change device state, serialize with others similar ones like up/down Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: fix secondary connectVladimir Kondratiev1-0/+4
when STA receiving connect() when already connected, it should return error Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: fw error recoveryVladimir Kondratiev4-1/+58
upon fw error interrupt - in STA mode, disconnect/cancel scan and then reset FW/HW added module param - no_fw_recovery which is false by default Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: Fix kernel oops in reset flowVladimir Kondratiev3-4/+21
wil_reset() removes vring's At the same time NAPI may be active performing Rx/Tx completion. If this happens, Rx/Tx polling functions going to access already removed vrings Make sure NAPI is idle and won't be started prior to vring removal. For this, track NAPI enabled state Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: fix memory leak in the AP flowVladimir Kondratiev2-0/+7
When switching between STA and AP modes, memory allocated for Rx vring leaks This is because start_ap() allocates Rx vring but stop_ap() do not free it. Logically, Rx vring is not valid (HW can't use it anymore), so free it in reset() Also, check double init for Rx vring and bail out with -EINVAL Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: reduce printingVladimir Kondratiev1-2/+2
Convert 2 often printed messages to dynamic ones Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: reset on power goodVladimir Kondratiev2-2/+8
Configure hardware to perform full reset on "power good". This mean, reset HW on system boot. This improves card stability. By default this is off. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: sort HW registers definitionsVladimir Kondratiev2-18/+19
Put all registers in order for easier navigation; fix naming to reflect hardware cluster Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: fix for HW bug in interrupt setup logicVladimir Kondratiev3-0/+19
Hardware bug triggered by the MSI init while INTx asserted for some reason. De-assert INTx prior to MSI set-up Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: report reset timeVladimir Kondratiev1-3/+3
Useful to detect hardware problems Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: reduce dmesg pollution after FW crashVladimir Kondratiev1-1/+6
When FW crashes, dmesg get polluted with the "FW not ready" error message. Print it only once per FW lifecycle Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: update target reset to support new HWVladimir Kondratiev3-1/+34
Support for new chip revision. Revision read from the internal register, PCIE config's "revision id" register do not indicate HW version properly Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: generalize tx desc mappingVladimir Kondratiev2-27/+33
Introduce enum to describe mapping type; allow 'none' in addition to 'single' and 'page'; this is preparation for GSO Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: add scatter-gather supportVladimir Kondratiev4-67/+115
When setting fragmented skb for Tx, assign skb to the last descriptor and set number of fragments in the 1-st one On Tx complete, HW sets "DU" bit in Tx descriptor only for the last descriptor; so search for it using number of fragments field. Middle descriptors may have "DU" bit not set by the hardware. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: enable scan while connectedVladimir Kondratiev2-8/+2
New firmware do support scan while connected. Enable it. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: Block data till "data port open" reportedVladimir Kondratiev5-6/+38
When connection established, as reported by WMI_CONNECT_EVENTID, 4-way handshaking required for the secure connection is not done yet. It is indicated by another WMI event. Wait for it and only then allow data traffic. In case of non-secure connection, FW reports "data port open" immediately after connection. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: Helpers to deal with 'cidxtid' fieldsVladimir Kondratiev2-1/+26
Encode/decode helpers Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-13Merge branch 'master' of ↵John W. Linville9-74/+874
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/ath/ath9k/recv.c
2014-03-04wil6210: fix smatch warning in wil_cfg80211_get_station()Vladimir Kondratiev1-1/+1
Smatch suggests to propagate error code from wil_find_cid(), and, indeed, it is a good idea. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-04wil6210: fix buffer overflow in wil_txdesc_debugfs_show()Vladimir Kondratiev1-6/+6
Wrong index comparison logic, found by smatch: drivers/net/wireless/ath/wil6210/debugfs.c:402 wil_txdesc_debugfs_show() warn: buffer overflow 'wil->vring_tx' 24 <= 24 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: do not reorder groupcast RxVladimir Kondratiev1-1/+7
Groupcast frames are not subject for BACK reordering because they are not ACK'ed and one can't request re-transmitt Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: single station disconnectVladimir Kondratiev4-7/+30
implement del_station() method in the struct cfg80211_ops It allows to disconnect single peer from the AP Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: use ether_addr_equalVladimir Kondratiev1-1/+2
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: Provide signal strength indicationVladimir Kondratiev2-9/+10
When notifying about Rx mgmt (ex: during scan), extract signal strength reported by the hardware. signal is not MBM, it is arbitrary units 0..100 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: Fill vring2cid_tid table earlyVladimir Kondratiev1-3/+3
Need to fill translation table before calling WMI with WMI_VRING_CFG_CMDID since firmware may generate events during this call; and events need translation table filled to be properly dispatched Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: disconnect only requested peerVladimir Kondratiev1-25/+56
Disconnect event reported by the FW, should lead to disconnection of only requested peer. Find for the appropriate CID and disconnect only it For AP-like interface, notify cfg80211 with del_sta(), for the client type interface, disconnect and turn link off. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: per-connection statisticsVladimir Kondratiev4-6/+77
Calculate statistics per connection, report with "iw station dump" Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: dump_station initial supportVladimir Kondratiev1-16/+66
Rx stats is not calculated per STA - just give some number Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: fix BACK status processingVladimir Kondratiev1-16/+31
When FW notifies about BACK status change, it provides ring ID. Process BA status for requested connection only. As for now, FW don't report Rx BACK status, it reports Tx one instead. As per current algorithm used in the firmware, imply Rx BACK state is in sync with Tx one Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: broadcast TxVladimir Kondratiev1-10/+55
Hardware do not support "real" broadcast on the air. Use method similar to the Directed Multicast Service (DMS) as described in the 10.23.15.2 "DMS procedures" This service copies frame and delivers unicast for each associated peer Do the following: send original frame to 1-st Tx vring, and send copies to all other active vrings. As currently hardware/firmware don't support A-MSDU, convert broadcast frame to unicast instead of wrapping it in A-MSDU Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: Find free vring for TxVladimir Kondratiev1-1/+12
There are 24 possible Tx vrings; when doind multiple connections, more then one vring has to be used. Search for free one and select it. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: Block ACKVladimir Kondratiev8-7/+290
When running multiple connections, hardware can't do BACK reordering and it should be done on the host. Model after mac80211's implementation. Drop RCU for now; to be re-added when BACK will be stabilized BACK handshaking is not implemented yet in the hardware, pretend it was done to support the way FW operating Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-18 00:30:39 +0300