summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/wil6210/wmi.h
AgeCommit message (Collapse)AuthorFilesLines
2017-06-21wil6210: add support for PCIe D3hot in system suspendMaya Erez1-10/+17
In order to preserve the connection in suspend/resume flow, wil6210 host allows going to PCIe D3hot state in suspend, instead of performing a full wil6210 device reset. This requires the platform ability to initiate wakeup in case of RX data. To check that, a new platform API is added. In addition, add cfg80211 suspend/resume callbacks implementation. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: align to latest auto generated wmi.hDedy Lansky1-21/+52
Align to latest version of the auto generated wmi file describing the interface with FW Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-27wil6210: align to latest auto generated wmi.hLior David1-2/+43
Align to latest version of the auto generated wmi file describing the interface with FW. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-27wil6210: support new WMI-only FW capabilityDedy Lansky1-0/+1
WMI_ONLY FW is used for testing in production. It cannot be used for scan/connect, etc. In case FW reports this capability, driver will not allow interface up. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-27wil6210: add disable_ap_sme module parameterDedy Lansky1-3/+20
By default, AP SME is handled by driver/FW. In case disable_ap_sme is true, driver doesn't turn-on WIPHY_FLAG_HAVE_AP_SME and the responsibility for AP SME is passed to user space. With AP SME disabled, driver reports assoc request frame to user space which is then responsible for sending assoc response frame and for sending NL80211_CMD_NEW_STATION. Driver also reports disassoc frame to user space which should then send NL80211_CMD_DEL_STATION. NL80211_CMD_SET_STATION with NL80211_STA_FLAG_AUTHORIZED is used by user space to allow/disallow data transmit. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01wil6210: align to latest auto generated wmi.hLior David1-128/+264
Align to latest version of the auto generated wmi file describing the interface with FW. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23wil6210: align to latest auto generated wmi.hLior David1-2/+206
Align to latest version of the auto generated wmi file describing the interface with FW. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-08-31wil6210: align to latest auto generated wmi.hLior David1-0/+292
Align to latest version of the auto generated wmi file describing the interface with FW. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-08-19wil6210: align to latest auto generated wmi.hMaya Erez1-79/+561
Align to latest version of the auto generated wmi file describing the interface with FW. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-11wil6210: add support for device led configurationMaya Erez1-0/+61
Add the ability to configure the device led to be used for notifying the AP activity (60G device supports leds 0-2). The host can also configure the blinking frequency of the led in three states. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-07wil6210: switch to generated wmi.hLior David1-647/+614
Switch to auto-generated version of wmi.h which is maintained by FW team. This will allow better sync between teams in the future and avoid bugs because of unexpected API changes. The wmi.h will have many differences but most are cosmetic. It also includes these real differences: 1. is_go parameter added to BCON_CTRL and START_PCP commands. 2. max_rx_pl_per_desc added to CFG_RX_CHAIN command. 3. various small API updates that are not currently used by driver. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-07wil6210: add support for discovery mode during scanLior David1-3/+4
Add support for discovery mode during scan. When discovery mode is active, station transmits special beacons while scanning. This can optimize the scan mainly when there is only one AP/PCP around. Discovery mode is implicitly used by firmware during P2P search. Since there is currently no use case where user space has a reason to directly control discovery mode, we expose it only through a debugfs flag. Also fix name confusion in the wmi_scan_type enumeration. The type previously called WMI_LONG_SCAN is actually WMI_ACTIVE_SCAN. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-06-09wil6210: Support hidden SSIDHamad Kadmany1-1/+9
Pass hidden SSID information to FW for proper operation. In order to be able to scan/connect to the hidden SSID, SSID setting is added when scan is requested from FW. SSID scanning currently supports single SSID due to FW limitation. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-05-04wil6210: broadcast for secure linkVladimir Kondratiev1-8/+17
Introduce 2 types of GTK, Tx (for this STA) and Rx (for each peer). Now, AP has only Tx GTK, STA - only Rx one. PBSS not supported yet; for it, continue using pseudo-DMS. Handle per-vring .1x state, update it from WMI_VRING_EN_EVENTID event. This allows unification for unicast and broadcast vrings. This mechanism replaces former per-CID "data_port_open" Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-05-04wil6210: Add pmc debug mechanism memory managementVladimir Kondratiev1-0/+15
Pmc is a hardware debug mechanism which allows capturing phy data, packets, and internally generated events and messages synchronized and time stamped by the hardware. It requires memory buffers allocated by the driver in order to be used by hardware dma to upstream real time debug data to host memory. Driver will handle memory allocation and release, and fetching the data from the memory to application layer via debug file system. The configuration of pmc is handled entirely by the application layer. Signed-off-by: Vladimir Shulman <qca_shulmanv@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-20wil6210: add bcast structures to WMIVladimir Kondratiev1-2/+18
Sync with the wmi definitions from the firmware team Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20wil6210: Align Rx frames on 4*n+2 by having SNAPVladimir Kondratiev1-0/+3
For the networking code and for hardware network accelerators, it is better to have IP header 4*n aligned. On the other side, DMA on Rx path require buffer to be aligned on 4*n as well. Having 14 bytes of Ethernet header, these 2 alignment requests are in contradiction. To solve this, order hardware offload block to not remove SNAP header. This adds extra 6 bytes between addresses and ethertype, making it 20 bytes total. This way, both buffer and IP header are 4*n aligned. Remaining is only to remove SNAP by shifting addresses 6 bytes. This involves data copying, so this feature should be disabled unless required by the platform. Module parameter "rx_align_2" (bool, default - false) introduced to control this feature. Feature is completely disabled when parameter is false. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29wil6210: sync WMI with firmwareVladimir Kondratiev1-7/+51
Incorporate changes from firmware. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: control AMSDU on Tx side of Block AckVladimir Kondratiev1-1/+11
When establishing Block Ack as originator (Tx), control AMSDU flag when sending ADDBA and update status upon establishment flow completion. To be used in AMSDU flows Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-09-11wil6210: coding style fixesVladimir Kondratiev1-16/+2
- parentheses, indentation, typos - seq_puts() instead of seq_printf() with single argument - sizeof(var) vs. sizeof(type) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-26wil6210: fix beamforming data reportingVladimir Kondratiev1-1/+1
When reading 'bf' file on debugfs, query beam forming status from firmware. Ignore CID's that return error or return all zeros. Remove obsolete code that used to maintain statistics on per-device basis, as now it is reported be per-CID and current. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-26wil6210: update copyright year 2014Vladimir Kondratiev1-1/+1
Fix Copyright headers in all files changed in 2014, to mention 2014 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22wil6210: sync with the latest FW APIVladimir Kondratiev1-19/+31
- add pcp_max_assoc_sta to the struct wmi_pcp_start_cmd - enum for the scan ststus Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: sync with new firmwareVladimir Kondratiev1-99/+264
Adjust driver for changes in the FW API. Noticeable changes in the FW are: - temperature sensing - infrastructure for multiple connections - infrastructure for P2P - signal strength indication This commit introduces only changes that are required to support same functionality as previous firmware, no new features. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-05wireless: add new wil6210 802.11ad 60GHz driverVladimir Kondratiev1-0/+1116
This adds support for the 60 GHz 802.11ad Wilocity card through a new driver, wil6210. Wilocity implemented the firmware, QCA maintains the device driver. Currently supported: - STA: with security - AP: limited to 1 connected STA, security disabled - Monitor: due to a hardware/firmware limitation either control or non-control frames are monitored Using a STA and AP with this drive, one can assemble a fully functional BSS. Throughput of 1.2Gbps is achieved with iperf. The wil6210 cards have on-board flash memory for the firmware, the cards comes pre-flashed and no firmware download is required. For more details see: http://wireless.kernel.org/en/users/Drivers/wil6210 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-28 21:34:17 +0300