summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/wil6210/wil6210.h
AgeCommit message (Collapse)AuthorFilesLines
2018-01-25wil6210: support parsing brd file address from fw fileMaya Erez1-0/+3
In order to allow using the same brd file across different 11ad chips, the address for loading the brd file should be part of the FW file, instead of the brd file. The brd file is expected to include only one section. To allow backward compatibility the driver reads the address from the brd file in case it is not included in the FW file. Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-25wil6210: enlarge FW mac_rgf_ext section for Sparrow D0Lior David1-0/+1
Sparrow D0 chips have slightly larger mac_rgf_ext section in order to support extra features such as multiple virtual interfaces. Signed-off-by: Lior David <liord@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-25wil6210: fix random failure to bring network interface upLior David1-0/+3
Currently when we want to bring the interface up, we first reset the device which causes the boot loader to run. Then we halt the device CPU, load FW image and resume the device CPU. There are some boot loader versions which perform redundant memory accesses even when idle. Halting the device CPU while boot loader access memory can cause the device memory controller to get stuck, the FW will fail to load and the network interface will not come up. For such boot loaders implement a workaround where we freeze the boot loader before halting the device CPU, so it will not perform any memory accesses. Signed-off-by: Lior David <liord@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-25wil6210: configure OTP HW vectors in SW reset flowMaya Erez1-0/+11
OTP HW vectors values are different for 40MHz and 330MHz AHB clocks. In SW reset flow, the host driver sets the clock frequency to 40MHz. In order to allow reading from the OTP, the host driver should configure the OTP HW vectors with the values that fits this clock frequency. Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-25wil6210: support flashless deviceDedy Lansky1-2/+11
Talyn device supports boot without flash. Driver detects flashless device and in this case waits for ready indication from HW machine (instead of bootloader ready indication). Also in this case, MAC address is retrieved from OTP. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-25wil6210: add support for Talyn AHB address mapMaya Erez1-4/+17
Talyn memory has changed, areas were increased and shifted to new locations. Use the appropriate address map according to the device JTAG ID. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-25wil6210: recognize Talyn JTAG IDMaya Erez1-0/+3
Add Talyn JTAG ID to the list of valid IDs and identify this device as Talyn. Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09wil6210: remove reference to preset_chandefLior David1-0/+1
The field preset_chandef of wireless_dev must not be accessed by the driver because it is private to cfg80211. Store the monitor channel locally in wil6210_priv instead. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09wil6210: remove leftover "FIXME"sDedy Lansky1-1/+1
"FIXME: IRQ mask debug" and "FIXME: interrupts enabled - for debug" can be removed because wil6210_debug_irq_mask() is now considered production feature. "FIXME FW can transmit only ucast frames to peer" and "FIXME real ring_id instead of hard coded 0" can be removed because FW/HW already support multicast transmission. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09wil6210: prevent parallel suspend and dump collectionMaya Erez1-0/+1
Suspend and crash dump operations can happen simultaneously in case there is a FW assert during the suspend procedure or when SSR calls all the devices crashdump callbacks. To prevent that, a new flag is added, indicating that the dumps collection is in progress, in order to allow the suspend/reset decline if the dumps collection already started. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09wil6210: add platform capabilities bitmapMaya Erez1-0/+5
Add get_capa callback to platform ops to allow reading the platform capabilities. Supported capabilities: - Keeping 11ad connection during suspend - T_POWER_ON 0 support - Usage of external clock Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09wil6210: support 40bit DMA addressesLazar Alexei1-1/+1
Add the option to support 40bit addresses since some platforms may not support 48bits but support 40bits Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09wil6210: support Scheduled scanDedy Lansky1-0/+4
Add support for sched_scan_start/stop by sending PNO commands to FW. Driver reports max_sched_scan_reqs and invokes cfg80211_sched_scan_results upon receiving WMI_SCHED_SCAN_RESULT_EVENTID from FW. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-27wil6210: fix build warnings without CONFIG_PMArnd Bergmann1-2/+0
The #ifdef checks are hard to get right, in this case some functions should have been left inside a CONFIG_PM_SLEEP check as seen by this message: drivers/net/wireless/ath/wil6210/pcie_bus.c:489:12: error: 'wil6210_pm_resume' defined but not used [-Werror=unused-function] drivers/net/wireless/ath/wil6210/pcie_bus.c:484:12: error: 'wil6210_pm_suspend' defined but not used [-Werror=unused-function] Using an __maybe_unused is easier here, so I'm replacing all the other #ifdef in this file as well for consistency. Fixes: 94162666cd51 ("wil6210: run-time PM when interface down") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-02wil6210: update statistics for suspendLazar Alexei1-3/+8
Currently the statistics show how many successful/failed suspend/resume operations the system had. Update the statistics by splitting each successful/failed suspend/resume operations to radio on/off. Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-02wil6210: remove suspend time statisticsLazar Alexei1-5/+0
Currently suspend time statistics are showed through debugfs. Remove time statistics in suspend state since the timing may not be accurate in that state. Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-02wil6210: fix PCIe bus mastering in case of interface downLazar Alexei1-2/+2
In case of interface down, radio is turned off but PCIe mastering is not cleared. This can cause unexpected PCIe access to the shutdown device. Fix this by clearing PCIe mastering also in case interface is down Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-02wil6210: add block size checks during FW loadLior David1-0/+1
When loading FW from file add block size checks to ensure a corrupted FW file will not cause the driver to write outside the device memory. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-02wil6210: refresh FW capabilities during interface upLior David1-0/+1
FW capabilities are currently retrieved only during module initialization, but userspace can replace the firmware while interface is down, so refresh the FW capabilities when interface is up (after FW is loaded) to ensure driver functionality matches the loaded FW. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-02wil6210: run-time PM when interface downLazar Alexei1-2/+16
Allow run-time suspend when interface is down, keep card alive when interface is up. If driver is in wmi only or debug_fw mode run-time PM won't suspend. Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-10-27ath: Convert timers to use timer_setup()Kees Cook1-1/+1
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31wil6210: clear PAL_UNIT_ICR part of device resetDedy Lansky1-0/+1
When FW starts running it can get D0 to D3 interrupt that is a leftover from previous system suspend while FW was not running. As this interrupt is not relevant anymore, clear it part of device reset procedure. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31wil6210: make debugfs compilation optionalGidon Studinski1-0/+6
Since debugfs is a kernel configuration option, enable the driver to compile without debugfs. Signed-off-by: Gidon Studinski <qca_gidons@qca.qualcomm.com> Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08wil6210: move vring_idle_trsh definition to wil6210_privGidon Studinski1-1/+1
vring_idle_trsh is used in the operational driver, hence should not be defined as a debugfs variable. Signed-off-by: Gidon Studinski <qca_gidons@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08wil6210: store FW RF calibration resultDedy Lansky1-0/+6
Store initial FW RF calibration result in driver. Set this calibration result back to FW after each FW reset in order to avoid future calibration procedures. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08wil6210: add statistics for suspend timeMaya Erez1-0/+5
Add statistics for total, min and max suspend time, that calculates the time the 11ad device was in suspend. Those statistics will help to estimate the power impact of d3hot feature. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-21wil6210: remove ioctl interfaceMaya Erez1-1/+0
Wireless drivers should not be using ioctl interface, hence remove this interface for wil6210 driver. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-21wil6210: add support for PCIe D3hot in system suspendMaya Erez1-0/+26
In order to preserve the connection in suspend/resume flow, wil6210 host allows going to PCIe D3hot state in suspend, instead of performing a full wil6210 device reset. This requires the platform ability to initiate wakeup in case of RX data. To check that, a new platform API is added. In addition, add cfg80211 suspend/resume callbacks implementation. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-23wil6210: support devices with different PCIe bar sizeMaya Erez1-1/+3
wil6210 devices can have different PCIe bar size, hence get the bar size from PCIe device instead of using a constant bar size. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-23wil6210: add option to load FTM FWHamad Kadmany1-2/+7
Module parameter allows to load specific FW used for FTM testing. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: prevent access to 11AD device if resume failsMaya Erez1-0/+1
In case wil6210 resume fails, wil6210 suspend function will try to access the suspended device in the next kernel suspend. To prevent that, add wil_status_suspended flag to indicate if the device is already suspended and clear it only if the resume succeeds. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: remove HALP voting in debugfs ioblobMaya Erez1-6/+0
debugfs ioblob function is called by the FW logs scripts to copy the FW logs via PCIe. As the FW logs collection is done in parallel to the operational 11AD actions, the HALP voting can take place during 11AD reset flow and other sensitive scenarios. To prevent that, remove HALP voting from the ioblob function. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: support 8KB RX buffersLior David1-0/+2
The 11ad spec requires 11ad devices to be able to receive 8KB packets over the air. Currently this is only possible by loading the driver with mtu_max=7912 but this also forces a smaller block ACK window size which reduces performance for stations which transmit normal sized packets (<2KB). Fix this problem as follows: 1. Add a module parameter rx_large_buf that when set, will allocate 8KB RX buffers regardless of mtu_max setting. 2. When receiving block ACK request agree to any window size not above our maximum, regardless of the mtu_max setting. This means if the other side transmits small packets (2KB) it can still set up block ACK with a large window size, and get better performance. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: restore power save state after internal FW resetLazar Alexei1-0/+4
The power save profile is set to default state in case of FW reset, regardless of the state before the reset took place. Fix this by saving the current power save profile and restore it in case of FW reset. Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-09wil6210: add oob_mode for AP certificationLior David1-0/+1
Add a new value to the oob_mode module parameter for supporting AP certification. All enabled values of oob_mode (>0) are intended only for debugging and diagnostics. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-09wil6210: correctly report locally generated disconnect in STA modeDedy Lansky1-0/+1
Driver always invoke cfg80211_disconnected() with locally_generated as false. Fix this by reporting true whenever the disconnect is triggered from upper layers (cfg80211) or from within the driver itself (reset, deinit). Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-09wil6210: store bss object and use cfg80211_connect_bss()Dedy Lansky1-0/+1
In a fast disconnect/connect sequence, cfg80211_connect_result() can fail to find the bss object which the driver is connecting to. Detailed sequence of events: * Driver is connected in STA mode * Disconnect request arrives from user space. Driver disconnects and calls cfg80211_disconnected() which adds new event to the cfg80211_wq worker thread * Connect request arrives from user space. cfg80211_connect() stores ssid/ssid_len and calls rdev_connect() * __cfg80211_disconnected() runs in worker thread and zero wdev->ssid_len * Connect succeeds. Driver calls cfg80211_connect_result() which fails to find the bss because wdev->ssid_len is zero To overcome this, upon connect request, store the bss object in the driver and upon connect completion pass it to kernel using cfg80211_connect_bss(). Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-09wil6210: use print_hex_dump_debug instead of print_hex_dump_bytesDedy Lansky1-0/+12
Some dynamic debug printouts in driver are using print_hex_dump_bytes. However, with dynamic debug disabled, print_hex_dump_bytes outputs to log unconditionally. Use print_hex_dump_debug instead to prevent log pollution when dynamic debug disabled. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-09wil6210: bus_request platform operation refinementLior David1-2/+3
The driver uses the bus_request platform operation to request resources from the platform for a specific bandwidth. Currently the driver requests resources for the maximum theoretical bandwidth, when interface is brought up. Refine this process a bit: now the driver will request a small amount of resources when interface is up, and will only issue the maximum request when connected. This mechanism will be improved further in the future to make more refined requests based on actual bandwidth. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-09wil6210: set dma mask to reflect device capabilityHamad Kadmany1-0/+1
device supports 48bit addresses, reflect that by setting the dma mask accordingly. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-27wil6210: option to override A-BFT length in start AP/PCPLior David1-0/+1
Add an option to specify and override the A-BFT length when starting an AP/PCP. See IEEE P802.11-2016, 10.38.5. The abft_len must be set before starting AP/PCP. It is only needed for diagnostics and certification. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-27wil6210: report association ID (AID) per station in debugfsLior David1-0/+1
Add reporting of the association ID (AID) for each station as part of the stations file in the debugfs. Valid AID values are 1-254. 0 is reported if the AID is unknown or not reported by firmware. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-27wil6210: support loading dedicated image for sparrow-plus devicesLazar Alexei1-4/+14
Driver may be used in platforms where some use sparrow cards while other use sparrow-plus cards, where different FW image is needed. Add the capability to load dedicated FW image in case sparrow-plus card is detected and fallback to default image if such does not exist. Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-27wil6210: add disable_ap_sme module parameterDedy Lansky1-2/+7
By default, AP SME is handled by driver/FW. In case disable_ap_sme is true, driver doesn't turn-on WIPHY_FLAG_HAVE_AP_SME and the responsibility for AP SME is passed to user space. With AP SME disabled, driver reports assoc request frame to user space which is then responsible for sending assoc response frame and for sending NL80211_CMD_NEW_STATION. Driver also reports disassoc frame to user space which should then send NL80211_CMD_DEL_STATION. NL80211_CMD_SET_STATION with NL80211_STA_FLAG_AUTHORIZED is used by user space to allow/disallow data transmit. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01wil6210: add debugfs blobs for UCODE code and dataLior David1-1/+2
Added new areas to fw_mappings area for UCODE code and data areas. The new areas are only exposed through debugfs blobs, and mainly needed to access UCODE logs. The change does not affect crash dumps because the newly added areas overlap with the "upper" area which is already dumped. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01wil6210: delay remain on channel when scan is activeLior David1-2/+7
Currently it was possible to call remain_on_channel(ROC) while scan was active and this caused a crash in the FW. In order to fix this problem and make the behavior consistent with other drivers, queue the ROC in case a scan is active and try it again when scan is done. As part of the fix, clean up some locking issues and return error if scan is called while ROC is active. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23wil6210: support NL80211_ATTR_WIPHY_RETRY_SHORTLior David1-0/+2
Add support for setting retry limit for short frames, using NL80211_CMD_SET_WIPHY with the attribute NL80211_ATTR_WIPHY_RETRY_SHORT. Update wiphy->retry_short from the FW default when interface is brought up. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23wil6210: add support for abort scanMaya Erez1-0/+3
Implement cfg80211 abort_scan op to allow the upper layer to abort an ongoing scan request. In addition, notify wil6210 device on scan abort request instead of just ignoring the scan response. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23wil6210: add support for power save enable / disableMaya Erez1-0/+2
New power management wmi commands provide the ability to change the device power save profile (enable / disable power save). Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23wil6210: fix net queue stop/wakeDedy Lansky1-0/+6
Driver calls to netif_tx_stop_all_queues/netif_tx_wake_all_queues are inconsistent. In several cases, driver can get to a situation where net queues are stopped forever and data cannot be sent. The fix is to stop net queues if there is at least one vring which is "full" and to wake net queues if all vrings are not "full". Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-18 01:44:57 +0300