summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/carl9170/usb.c
AgeCommit message (Collapse)AuthorFilesLines
2014-09-14carl9170: fix sending URBs with wrong type when using full-speedRonald Wahl1-4/+27
commit 671796dd96b6cd85b75fba9d3007bcf7e5f7c309 upstream. The driver assumes that endpoint 4 is always an interrupt endpoint. Unfortunately the type differs between high-speed and full-speed configurations while in the former case it is indeed an interrupt endpoint this is not true for the latter case - here it is a bulk endpoint. When sending URBs with the wrong type the kernel will generate a warning message including backtrace. In this specific case there will be a huge amount of warnings which can bring the system to freeze. To fix this we are now sending URBs to endpoint 4 using the type found in the endpoint descriptor. A side note: The carl9170 firmware currently specifies endpoint 4 as interrupt endpoint even in the full-speed configuration but this has no relevance because before this firmware is loaded the endpoint type is as described above and after the firmware is running the stick is not reenumerated and so the old descriptor is used. Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2011-07-05carl9170: add NEC WL300NU-AG usbidChristian Lamparter1-0/+2
Cc: stable@kernel.org Reported-by: Mark Davis Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-02-25carl9170: add Airlive X.USB a/b/g/n USBIDJan Puk1-0/+2
"AirLive X.USB now works perfectly under a Linux environment!" Cc: <stable@kernel.org> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04carl9170: fix usb pm suspend->resume woesChristian Lamparter1-16/+37
This patch revamps some common code-paths which are shared between (re-)initialization and suspend/resume subroutines. It also adds some helpful comments about quirks and associated difficulties. It's quite big, but it should fix #25382: <https://bugzilla.kernel.org/show_bug.cgi?id=25382> And hopefully the code is robust enough to deal with all possible suspend/resume scenarios without requiring the user to do any sort of manual and possibly dangerous work. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02wireless: Remove unnecessary casts of usb_get_intfdataJoe Perches1-2/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-25Merge branch 'master' of ↵John W. Linville1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-11-15carl9170: fix usb anchor wait timeoutChristian Lamparter1-2/+2
usb_wait_anchor_empty_timeout's @timeout wants milliseconds and not jiffies. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15carl9170: fix spurious restart due to high latencyChristian Lamparter1-1/+1
RX Stress tests of unidirectional bulk traffic with bitrates of up to 220Mbit/s have revealed that the fatal-event recovery logic [which was solely triggered by an out-of-rx-buffer situation] is too aggressive. The new method now "pings" the device and then decides - based on the response - whenever a restart is needed or not. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09carl9170: usbid table updatesChristian Lamparter1-1/+3
This patch includes the following updates: * add D-Link DWA-130 Rev D * Netgear has three WNDA3100 versions. the original WNDA3100 is now called WNDA3100v1. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25carl9170: fix async command buffer leakChristian Lamparter1-6/+19
If __carl9170_exec_cmd fails to upload an asynchronous command to the device, the functions: carl9170_reboot and carl9170_powersave will leak the temporary command assembly buffer. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-28carl9170: interrupt urbs must not set URB_ZERO_PACKETChristian Lamparter1-2/+0
This patch fixes a bug in the driver which was exposed by CONFIG_USB_DEBUG: "usb 1-1.6.3: BOGUS urb flags, 40 --> 0" The transfer flag "URB_ZERO_PACKET" is only valid for bulk urbs. Reported-by: André Erdmann Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-21carl9170: fix state downgrade during resetChristian Lamparter1-2/+0
Don't mark the device as completely dead just yet. If all goes to plan and carl9170_reboot succeeds then we can skip the expensive userspace-driven reinitialization anyway. And if it doesn't and carl9170_reboot fails, then carl9170_usb_cancel_urbs will do the necessary steps. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-21carl9170: abort tasklet during usb resetChristian Lamparter1-0/+3
This patch prevents the tasklet code from interfering while the firmware is down for an unscheduled maintenance. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-15carl9170: 802.11 rx/tx processing and usb backendChristian Lamparter1-0/+1137
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-26 12:51:16 +0300