summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/common.h
AgeCommit message (Collapse)AuthorFilesLines
2016-07-08ath9k: Fix beacon configuration for addition/removal of interfacesBenjamin Berg1-0/+1
This patch fixes some issues with interface reconfiguration. It could for example happen that an AP interface in beacon slot 0 was removed leaving an IBSS station in one of the other slots. When this happens the driver never sends out the beacon as it only tries to send a beacon from slot 0. Appart from that the tracking of required changes to the beacon config is relatively complicated and prone to errors. The approach taken here is to solve reconfiguration issues is to reconfigure the beacons when any interface changes. This means that the complexity of deciding whether an interface change may modify the beacon configuration is gone. It also means that the beacon config will be reliably updated when an interface is removed. The issue that a single non-AP interface might not be in beacon slot 0 and wouldn't be send out is solved by moving it into the first slot. The TSF value in hardware is adjusted accordingly so that the timestamp of the beacons stay consistent. Signed-off-by: Benjamin Berg <benjamin.berg@open-mesh.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-16ath9k: fix tracking of enabled AP beaconsFelix Fietkau1-1/+1
sc->nbcnvifs tracks assigned beacon slots, not enabled beacons. Therefore, it cannot be used to decide if cur_conf->enable_beacon (bool) should be updated, or if beacons have been enabled already. With the current code (depending on the order of calls), beacons often do not get enabled in an AP+STA setup. To fix tracking of enabled beacons, convert cur_conf->enable_beacon to a bitmask of enabled beacon slots. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-11-12ath9k: move spectral.* to common-spectral.*Oleksij Rempel1-0/+1
and rename exports from ath9k_spectral_* to ath9k_cmn_spectral_* Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13ath9k-common: create common-debug and move modal_eeprom to cmnOleksij Rempel1-0/+1
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17ath9k: move ath9k_beacon_config_sta to common-beaconOleksij Rempel1-0/+1
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17ath9k-common: add nexttbtt and intval to ath_beacon_configOleksij Rempel1-0/+2
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17ath9k|ath9k_htc: move IEEE80211_MS_TO_TU to commonOleksij Rempel1-0/+2
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17ath9k: move struct ath_beacon_config to commonOleksij Rempel1-0/+9
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28ath9k: move ath9k_init_channels_rates to common-initOleksij Rempel1-0/+2
and rename it to ath9k_cmn_init_channels_rates. sbands are move to ath_common as well. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13ath9k: move ath9k_rx_skb_postprocess to common.cOleksij Rempel1-0/+5
and rename it to ath9k_cmn_rx_skb_postprocess. We will use it on ath9k_htc. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13ath9k: move ath9k_rx_accept to common.cOleksij Rempel1-0/+6
we can reuse it on ath9k_htc Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13ath9k: move ath9k_process_rate to common.cOleksij Rempel1-0/+4
we can reuse this function in ath9k_htc Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13ath9k: move ath9k_process_rssi to common.cOleksij Rempel1-0/+4
we can reuse this fucntion on ath9k_htc. Now we will need to use common version last_rssi, so switch it too. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k: make ath9k_cmn_update_ichannel staticFelix Fietkau1-4/+3
Rework its wrapper function to make it more generic, using it as a replacement for previous calls to ath9k_cmn_update_ichannel. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: use chandef instead of channel_typeSimon Wunderlich1-2/+1
To enable support for 5/10 MHz, some internal functions must be converted from using the (old) channel_type to chandef. This is a good chance to change all remaining occurences. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10ath9k_common: remove ath9k_cmn_padposFelix Fietkau1-1/+0
It is equivalent to ieee80211_hdrlen Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18Merge branch 'master' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/nfc/llcp/llcp.c
2013-03-07ath9k: simplify ATH_EP_RNDBob Copeland1-1/+1
Remove the embedded branch to make the ATH_EP_RND macro a little clearer. The new version also generates better code, saving 24 bytes of text: text data bss dec hex filename 87858 1641 24 89523 15db3 ath9k_orig.ko 87834 1641 24 89499 15d9b ath9k_new.ko Although neither version handles negative values particularly well, the lone caller clamps all negative values to zero anyway. I have verified that the results are the same for the range of possible positive rssi values. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-27ath9k: fix RSSI dummy marker valueFelix Fietkau1-1/+1
RSSI is being stored internally as s8 in several places. The indication of an unset RSSI value, ATH_RSSI_DUMMY_MARKER, was supposed to have been set to 127, but ended up being set to 0x127 because of a code cleanup mistake. This could lead to invalid signal strength values in a few places. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-30ath9k: Replace WME_NUM_TID with IEEE80211_NUM_TIDSSujith Manoharan1-1/+0
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21ath9k/ath9k_htc: Remove WME macrosSujith Manoharan1-7/+0
Use the macros provided by mac80211 and remove redundant declarations inside the drivers. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24ath9k: Move ath9k_init_crypto to commonRajkumar Manoharan1-0/+1
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: Drag the driver to the year 2011Sujith Manoharan1-1/+1
The Times They Are a-Changin'. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ath9k_hw: Move bt_stomp to hw from common.Vivek Natarajan1-8/+0
Move bt_stomp to ath9k_hw and add its support for latest chipsets. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04ath9k: move update tx power to commonRajkumar Manoharan1-0/+2
move ath_update_txpow to common to remove code duplication in both ath9k & ath9k_htc. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-28ath9k: Remove unused IEEE80211_WEP_NKIDBruno Randolf1-2/+0
IEEE80211_WEP_NKID is not used in ath9k any more since the key handling code has been moved to ath/. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-08ath: Convert ath_print to ath_dbgJoe Perches1-1/+0
Remove ath/debug.h and the includes of these files. Coalesce long formats. Correct a few misspellings and missing "\n"s from these logging messages. Remove unnecessary trailing space before a newline. Remove ARRAY_SIZE casts, use printf type %zu Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15ath9k: rework tx queue selection and fix queue stopping/wakingFelix Fietkau1-4/+5
The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15ath9k: initialize per-channel tx power limits instead of hardcoding themFelix Fietkau1-2/+3
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath9k: Use common ath key management functionsBruno Randolf1-6/+0
Use key management functions which have been moved to ath/key.c and remove ath9k copies of these functions and other now unused definitions. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-25ath9k_common: Move bt_stomp to common for sharing with ath9k_htc.Vivek Natarajan1-0/+10
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-05ath9k_common: Move count_streams to common moduleSujith1-0/+1
This can be used by ath9k_htc. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03ath9k: Move driver specific structuresSujith1-63/+0
A bunch of data structures are present in the common module, which are internal to ath9k. Move them to ath9k.h Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03ath9k: Move ath9k specific RX code to driverSujith1-13/+0
This patch relocates RX processing code from the common module to ath9k. This reduces the size of the common module which is also used by ath9k_htc. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k: Make bf_desc of ath_buf opaqueVasanthakumar Thiagarajan1-1/+1
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purposeVasanthakumar Thiagarajan1-0/+1
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: start building an abstraction layer for hardware routinesLuis R. Rodriguez1-0/+1
ath9k supports the AR5008, AR9001 and AR9002 family of Atheros chipsets, all 802.11n. The new breed of 802.11n chips, the AR9003 family will be supported as well soon. To help with its support we're going to add a few callbacks for hardware routines which differ considerably instead of adding branch checks for the revision at runtime. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ath9k_common: Move RX filter code to ath9k_htcSujith1-4/+0
The calculation of RX filter is fairly different between ath9k and ath9k_htc, trying to make this common between the two drivers would result in code churn. While at it, remove the handling of PSPOLL filter, it can be added when(if) AP support is added to ath9k_htc. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-23ath9k_htc: Support for AR9271 chipset.Sujith1-0/+17
Features: * Station mode * IBSS mode * Monitor mode * Legacy support * HT support * TX/RX 11n Aggregation * HW encryption * LED * Suspend/Resume For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28ath9k: Proper padding/unpadding for the TX/RX path.Benoit Papillault1-0/+2
Software padding is done on the TX path and software unpadding is done on the RX path. This patch corrects the position where the padding occurs. A specific function computes the pad position and this function is used in the TX and RX path. This patch has been tested by generating every possible 802.11 frames with every possible frame_control field and a varying length. This patch is useful for analyzing non standard 802.11 frames going over the air Signed-off-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28ath9k: fix processing of TX PS null data framesLuis R. Rodriguez1-0/+1
When mac80211 was telling us to go into Powersave we listened and immediately turned RX off. This meant hardware would not see the ACKs from the AP we're associated with and hardware we'd end up retransmiting the null data frame in a loop helplessly. Fix this by keeping track of the transmitted nullfunc frames and only when we are sure the AP has sent back an ACK do we go ahead and shut RX off. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Vivek Natarajan <Vivek.Natarajan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-19ath9k: get rid of tx_info_privFelix Fietkau1-0/+1
This patch removes the need for separately allocated private tx info data in ath9k and brings the driver one small step closer to using the mac80211 rate control API properly. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-12ath9k_common: add new module to share 802.11n driver helpersLuis R. Rodriguez1-0/+123
ath9k and ath9k_htc share a lot of common hardware characteristics. They only differ in that ath9k_htc works with a target CPU and ath9k works directly with the hardware. ath9k_htc will do *some* things in the firmware, but a lot of others on the host. The common 802.11n hardware code is already shared through the ath9k_hw module. Common helpers amongst all Atheros drivers can use the ath module, this includes ath5k and ar9170 as users. But there is some common driver specific helpers which are not exactly hardware code which ath9k and ath9k_htc can share. We'll be using ath9k_common for this to avoid bloating the ath module and the common 802.11n hardware module ath9k_hw. We start by sharing skb pre and post processing in preparation for a hand off to mac80211. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-26 17:22:37 +0300