summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
AgeCommit message (Collapse)AuthorFilesLines
2016-10-07ath9k: Fix programming of minCCA power thresholdSven Eckelmann1-1/+1
commit aaab50fcea78ae3414c3afc25aae8d0603df34d0 upstream. The function ar9003_hw_apply_minccapwr_thresh takes as second parameter not a pointer to the channel but a boolean value describing whether the channel is 2.4GHz or not. This broke (according to the origin commit) the ETSI regulatory compliance on 5GHz channels. Fixes: 3533bf6b15a0 ("ath9k: Fix regulatory compliance") Signed-off-by: Sven Eckelmann <sven@narfation.org> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-15ath9k: Add QCA956x HW supportMiaoqing Pan1-5/+10
Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-11-25ath9k: add TX power per-rate tablesLorenzo Bianconi1-0/+47
Add TX power per-rate tables for different MIMO modes (e.g STBC) in order to cap the maximum TX power value per-rate in the TX descriptor path. Cap TX power for self generated frames (ACK, RTS/CTS). Currently TPC is supported just by AR9003 based chips Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k: Fix thermometer programmingSujith Manoharan1-4/+5
The registers that control the on-chip thermometer need to be programmed based on the chainmask that the solution supports, not the chainmask that is present in the eeprom. Cc: Miaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25ath9k_hw: fix XPABIASLEVEL settings for AR9531Rajkumar Manoharan1-1/+2
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17ath9k: Fix temperature compensationSujith Manoharan1-24/+35
The registers for temperature compensation need to be programmed only for active chains. Use the TX chainmask to make sure that this is done properly for QCA953x. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-14ath9k: Convert uses of __constant_<foo> to <foo>Joe Perches1-2/+2
The use of __constant_<foo> has been unnecessary for quite awhile now. Make these uses consistent with the rest of the kernel. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-05ath9k: Fix TX power calculationSujith Manoharan1-0/+4
The commit, "ath9k_hw: Fix incorrect Tx control power in AR9003 template" fixed the incorrect values in the eeprom templates, but if boards have already been calibrated with incorrect values, they would still be using the wrong TX power. Fix this by assigning a default value in such cases. Cc: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-04ath9k: Add hardware support for QCA9531Sujith Manoharan1-5/+8
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-19ath9k: Fix regulatory complianceSujith Manoharan1-0/+32
To comply with ETSI regulations, make sure that the CCA registers are programmed with the threshold values from the EEPROM/Caldata. A new field is used to indicate if the card has been calibrated with the required threshold information. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-19ath9k: Update BaseExtension_1 eeprom structureSujith Manoharan1-5/+5
* Add a new field "misc_enable" * Use int_8 for tempslopextension. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-19ath9k: Initialize "switchcomspdt" eeprom field explicitlySujith Manoharan1-0/+10
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-10ath9k: Apply tuning caps for AR9330 and AR9485Sujith Manoharan1-1/+1
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-10ath9k: Fix internal regulator for AR955xSujith Manoharan1-1/+1
The internal regulator needs to be programmed correctly for AR955x. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Fix XLNA bias strengthSujith Manoharan1-1/+1
The EEPROM parameter to determine whether the bias strength values for XLNA have to be applied is part of the miscConfiguration field and not featureEnable. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Fix QuickDrop usageSujith Manoharan1-9/+11
Bit 5 in the miscConfiguration field of the base EEPROM header denotes whether QuickDrop is enabled or not. Fix the incorrect usage of BIT(1) and also make sure that this is done only for the required chips. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: replace snprintf() with scnprintf()Zefir Kurtisi1-6/+6
Whenever the return value of snprintf() is used to calculate remaining buffer-space, we wanted to use sncprintf() instead. Indentation is adapted where possible. Some lines exceed the line width limit, either they did it already before, or since they can not be broken reasonably well. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Fix antenna diversity init for AR9565Sujith Manoharan1-1/+16
Program the HW registers (AR_PHY_CCK_DETECT, AR_PHY_MC_GAIN_CTRL) with the correct values for AR9565 to allow LNA combining. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Bypass EEPROM for diversity cap for AR9565Sujith Manoharan1-1/+4
Use a default antenna diversity value for AR9565 instead of relying on the EEPROM/OTP programmed value. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-28ath9k: ar9003_eeprom.c:3618 fix variable name typoJohn W. Linville1-2/+2
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c: In function 'ar9003_hw_ant_ctrl_apply': >> drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3618: warning: 'regval' is used uninitialized in this function It seems obvious that 'regval' should have been 'value'... Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-22ath9k: Add antenna diversity tweak for CUS198Sujith Manoharan1-0/+5
This improves RX diversity and performance for AR9485. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-05ath9k: Fix antenna control init for AR9485Sujith Manoharan1-1/+13
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-05ath9k: Support ANT diversity for WB225Sujith Manoharan1-3/+2
WB225 based cards like CUS198 and CUS230 support both fast antenna diversity and LNA combining. Add support for this and also program the SWCOM register with the correct "ant_ctrl_comm2g_switch_enable" value. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-05ath9k: Remove "shared_chain_lnadiv"Sujith Manoharan1-1/+2
This variable is redundant since we can use common->bt_ant_diversity to determine if diversity has to be enabled/disabled. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24ath9k: Fix diversity combining for AR9285Sujith Manoharan1-2/+2
When antenna diversity combining is enabled in the EEPROM, the initial values for the MAIN/ALT config have to be programmed correctly. This patch adds it for AR9285. Since the diversity combining macros are common to all chip families, remove the redundant AR9285 macros and move the definitions to phy.h. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24ath9k: Add support for AR9462 2.1Sujith Manoharan1-3/+4
Various parts of the HW code are applicable for both v2.0 and v2.1. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Convert a couple of debug messagesSujith Manoharan1-2/+2
Use the REGULATORY debug level to print the target power details. EEPROM can be used for other purposes and this spams the log. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-17ath9k: Fix LNA gpio for AR9485Sujith Manoharan1-1/+1
The commit "ath9k: Add custom parameters for CUS198" didn't pass the correct gpio value to ath9k_hw_cfg_output(). Fix it. Reported-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-14ath9k: Add custom parameters for CUS198Sujith Manoharan1-3/+15
CUS198 is a card based on AR9485. There are differences between the base reference design HB125 and CUS198. Identify such cards based on the PCI subsystem IDs and set HW parameters appropriately. Addresses this bug - https://bugzilla.kernel.org/show_bug.cgi?id=49201 Cc: jkp@iki.fi Cc: gfmichaud@gmail.com Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12ath9k_hw: Assign default xlna config for AR9485Sujith Manoharan1-2/+6
For AR9485 boards with XLNA, the default gpio config is not set correctly, fix this. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-07ath9k_hw: Fix fixed antenna for AR9462Sujith Manoharan1-0/+17
When the RX chainmask is set to 0x2 for AR9462, certain values from chain1 have to be programmed for chain0 also. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-09ath9k_hw: Add TempCompensation feature for AR9550Sujith Manoharan1-29/+99
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11ath9k: use 'struct ath_hw *' as the first argument for 'ath9k_hw_nvram_read'Gabor Juhos1-9/+8
The 'ath9k_hw_nvram_read' function takes a 'struct ath_common *' as its first argument. Almost each of its caller has a 'struct ath_hw *' parameter in their argument list, and that is dereferenced in order to get the 'struct ath_common' pointer. Change the first argument of 'ath9k_hw_nvram_read' to be a 'struct ath_hw *', and remove the dereference calls from the callers. Also change the type of the first argument of the ar9300_eeprom_read_{byte,word} functions. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11ath9k_hw: Calculate the correct training power for PAPRDSujith Manoharan1-13/+28
Assign the training power for PAPRD based on the chip. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11ath9k_hw: Add HW cap for PAPRDSujith Manoharan1-6/+2
Add a HW capability to indicate whether PAPRD is enabled for the card, since PAPRD could be enabled in the EEPROM, but disabled in the driver. This makes things clearer. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-29ath9k_hw: Configure new switch table for AR9565 BTCOEXRajkumar Manoharan1-1/+1
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-29ath9k: adjust WLAN and BT concurrent transmissionRajkumar Manoharan1-3/+15
The simulataneous transmission of both WLAN and BT might cause increase in power levels. To avoid regulatory violation, WLAN tx power will be adjusted according to BT power index based on avaliability of BT scheduling messages. WLAN tx power reduction might affect its performance. So WLAN tx power is only be lowered when the signal strength is good enough. Otherwise concurrent tx will be disabled and WLAN uses it default power levels. Also concurrent tx is disabled whenever WLAN is moving to off-channel which might be used by BT. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-19ath/ath9k/ar9003_eeprom.c: Remove semicolon after ifPeter Senna Tschudin1-1/+1
This patch remove a semicolon after if(...) that is preventing the error check to work correctly. Removing this semicolon will change the code behavior, but this is intended. The semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r1@ position p; @@ if (...);@p @script:python@ p0 << r1.p; @@ // Emacs org-mode output cocci.print_main("", p0) cocci.print_secs("", p0) // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-30Merge branch 'for-davem' of ↵David S. Miller1-7/+13
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== Here is another batch of updates intended for 3.7... Highlights include an hci_connect re-write in Bluetooth, HCI/LLC layer separation in NFC, removal of the raw pn544 NFC driver, NFC LLCP raw sockets support, improved IBSS auth frame handling in mac80211, full-MAC AP mode notification support in mac80211, a lot of attention paid to brcmfmac, and the usual level of updates to iwlwifi, ath9k, mwifiex, and rt2x00, and various other updates. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+4
Conflicts: drivers/net/team/team.c drivers/net/usb/qmi_wwan.c net/batman-adv/bat_iv_ogm.c net/ipv4/fib_frontend.c net/ipv4/route.c net/l2tp/l2tp_netlink.c The team, fib_frontend, route, and l2tp_netlink conflicts were simply overlapping changes. qmi_wwan and bat_iv_ogm were of the "use HEAD" variety. With help from Antonio Quartulli. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-24ath9k_hw: Add a HW callback to set diversitySujith Manoharan1-0/+10
This patch adds a new callback to handle WLAN RX diversity for AR9565. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k_hw: Use HW cap ATH9K_HW_CAP_ANT_DIV_COMBSujith Manoharan1-7/+3
Instead of trying to determine whether antenna diversity is enabled by parsing eeprom data, use ATH9K_HW_CAP_ANT_DIV_COMB which is already filled at init time. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Rename antenna diversity macrosSujith Manoharan1-15/+12
The register macros for antenna diversity are common for AR9462 and AR9565, rename them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: add 8 points for 5G temp slopRajkumar Manoharan1-7/+19
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Add AR9565 HW supportSujith Manoharan1-5/+5
Various parts of the code require AR9565 checks, this patch adds them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Read and configure thermocal for AR9462Rajkumar Manoharan1-0/+19
Read and configure thermometer calibration results read from OTP card. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Read and apply thermometer settings from EEPROMRajkumar Manoharan1-0/+39
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-10ath9k: make PA linearization optional, disabled by default and fix checksFelix Fietkau1-0/+4
Some checks for PA linearization support checked ATH9K_HW_CAP_PAPRD and some used the EEPROM ops, leading to issues in tx power handling, since those two can be out of sync. Disable the feature by default, since it has been reported that it can cause damage to the rx path under some circumstances. It can now be enabled for testing via debugfs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06ath9k: fix indentation in ar9003_hw_set_power_per_rate_tableGabor Juhos1-74/+69
The current indentation is off by one tab. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06ath9k: optimize power level initialization for CTL_[25]GHT20Gabor Juhos1-7/+1
The first part of the power array is initialized in a loop and the last two values are initialized separately. Extend the loop to cover the last two items, and remove the separate initialization. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-04 11:27:49 +0300