summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/ar5008_phy.c
AgeCommit message (Collapse)AuthorFilesLines
2020-11-07ath9k: ar5008_phy: Demote half completed function headersLee Jones1-12/+3
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'rfBuf' not described in 'ar5008_hw_phy_modify_rx_buffer' drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'reg32' not described in 'ar5008_hw_phy_modify_rx_buffer' drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'numBits' not described in 'ar5008_hw_phy_modify_rx_buffer' drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'firstBit' not described in 'ar5008_hw_phy_modify_rx_buffer' Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-21-lee.jones@linaro.org
2020-08-27ath9k: ar5008_initvals: Move ar5416Bank{0,1,2,3,7} to where they are usedLee Jones1-1/+30
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/ar5008_initvals.h:627:18: warning: ‘ar5416Bank7’ defined but not used [-Wunused-const-variable=] 627 | static const u32 ar5416Bank7[][2] = { | ^~~~~~~~~~~ drivers/net/wireless/ath/ath9k/ar5008_initvals.h:548:18: warning: ‘ar5416Bank3’ defined but not used [-Wunused-const-variable=] 548 | static const u32 ar5416Bank3[][3] = { | ^~~~~~~~~~~ drivers/net/wireless/ath/ath9k/ar5008_initvals.h:542:18: warning: ‘ar5416Bank2’ defined but not used [-Wunused-const-variable=] 542 | static const u32 ar5416Bank2[][2] = { | ^~~~~~~~~~~ drivers/net/wireless/ath/ath9k/ar5008_initvals.h:536:18: warning: ‘ar5416Bank1’ defined but not used [-Wunused-const-variable=] 536 | static const u32 ar5416Bank1[][2] = { | ^~~~~~~~~~~ drivers/net/wireless/ath/ath9k/ar5008_initvals.h:462:18: warning: ‘ar5416Bank0’ defined but not used [-Wunused-const-variable=] 462 | static const u32 ar5416Bank0[][2] = { | ^~~~~~~~~~~ Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200826093401.1458456-27-lee.jones@linaro.org
2020-08-14ath9k: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200727193520.GA832@embeddedor
2018-11-05ath9k: ar5008_phy: mark expected switch fall-throughGustavo A. R. Silva1-1/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1056532 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-28ath9k: remove unused array firstep_tableColin Ian King1-4/+0
Array firstep_table is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: 'firstep_table' defined but not used [-Wunused-const-variable=] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-13ath9k: mark expected switch fall-throughsGustavo A. R. Silva1-0/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-15ath9k: replace eeprom_param EEP_MINOR_REV with get_eeprom_revMartin Blumenstingl1-1/+1
get_eeprom(ah, EEP_MINOR_REV) and get_eeprom_rev(ah) are both doing the same thing: returning the EEPROM revision (12 lowest bits). Make the code consistent by using get_eeprom_rev(ah) everywhere. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-09ath9k: remove repetitions of mask array sizeBob Copeland1-6/+3
The constant "123", which is the number of elements in mask_m / mask_p, is repeated several times in this function. Replace memsets with array initialization, and replace a loop conditional with ARRAY_SIZE() so that we don't repeat ourselves. Signed-off-by: Bob Copeland <me@bobcopeland.com> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-15ath9k: ar5008_hw_cmn_spur_mitigate: add missing mask_m & mask_p initialisationOleksij Rempel1-5/+3
by moving common code to ar5008_hw_cmn_spur_mitigate i forgot to move mask_m & mask_p initialisation. This coused a performance regression on ar9281. Fixes: f911085ffa88 ("ath9k: split ar5008_hw_spur_mitigate and reuse common code in ar9002_hw_spur_mitigate.") Reported-by: Gustav Frederiksen <lkml2017@openmailbox.org> Tested-by: Gustav Frederiksen <lkml2017@openmailbox.org> Cc: <stable@vger.kernel.org> # 4.2+ Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26ath9k: split ar5008_hw_spur_mitigate and reuse common code in ↵Oleksij Rempel1-72/+83
ar9002_hw_spur_mitigate. [ar5008 and ar9002]_hw_spur_mitigate have big portion of identical code. This patch will move common part of ar5008_hw_spur_mitigate to ar5008_hw_cmn_spur_mitigate and reuse it in ar9002_hw_spur_mitigate. As noticed by Joe Perches I reuse ar9002_hw_spur_mitigate (const) version of declarations for pilot_mask_reg and chan_mask_reg. There should be no other difference with original code. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30ath9k: write buffer related optimisation in ar5008_hw_set_channel_regsOleksij Rempel1-2/+3
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15ath9k: add power per-rate tables for AR9002 chipsLorenzo Bianconi1-0/+80
Add TX power per-rate tables for MIMO/legacy modes for AR9002 based chips in order to cap the maximum TX power value per-rate in the TX descriptor path. Add TX power adjustments for HT40 mode, open loop CCK rates and eeprom power bias for AR9280 and later chips Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-10-30ath9k: set pulse_rssi threshold to 15Lorenzo Bianconi1-1/+1
Reduce pulse_rssi threshold to 15 in order to improve radar pattern detection probability on ext channel Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-27ath9k: do not overwrite AR_PHY_RADAR_1 MSBLorenzo Bianconi1-1/+4
Do not overwrite AR_PHY_RADAR_1 most significant byte default value Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30ath9k_hw: reduce ANI spur immunity setting on HT40 extension channelFelix Fietkau1-3/+2
The cycpwr_thr1 value needs to be lower on the extension channel than on the control channel, similar to how the register settings are programmed in the initvals. Also drop the unnecessary check for HT40 - this register can always be written. This patch has been reported to improve HT40 stability and throughput in some environments. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30Revert "ath9k_hw: reduce ANI firstep range for older chips"Felix Fietkau1-1/+3
This reverts commit 09efc56345be4146ab9fc87a55c837ed5d6ea1ab I've received reports that this change is decreasing throughput in some rare conditions on an AR9280 based device Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-09ath9k_hw: reduce ANI firstep range for older chipsFelix Fietkau1-3/+1
Use 0-8 instead of 0-16, which is closer to the old implementation. Also drop the overwrite of the firstep_low parameter to improve stability. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-14ath9k_hw: set ANI firstep as absolute values instead of relativeFelix Fietkau1-36/+5
On older chips, the INI value differ in similar ways as cycpwr_thr1, so convert it to absolute values as well. Since the ANI algorithm is different here compared to the old implementation (fewer steps, controlled at a different point in time), it makes sense to use values similar to what would be applied for newer chips, just without relying on INI defaults. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-14ath9k_hw: set ANI cycpwr_thr1 as absolute values instead of relativeFelix Fietkau1-38/+6
The table was copied from the ANI implementation of AR9300. It assumes that the INI values contain a baseline value that is usable as reference from which to increase/decrease based on the noise immunity value. On older chips, the differences are bigger and especially AR5008/AR9001 are configured to much more sensitive values than what is useful. Improve ANI behavior by reverting to the absolute values used in the previous implementation (expressed as a simple formula instead of the old table). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k_hw: remove references to hw->confFelix Fietkau1-1/+1
Accessing it to get the current operating channel is racy and in the way of further channel handling related changes Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k_hw: remove IS_CHAN_B()Felix Fietkau1-2/+4
Hardware 802.11b-only mode isn't supported by the driver (the device is configured for 802.11n/g instead). Simplify the code by removing checks for it. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k_hw: remove direct accesses to channel mode flagsFelix Fietkau1-28/+7
Use wrappers where available. Simplifies code and helps with further improvements to the channel data structure Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Remove incorrect diversity initializationSujith Manoharan1-3/+0
Fast antenna diversity is required only for single chain chips and the diversity initialization is done in the per-family board setup routines. Enabling of diversity should be done based on the calibrated EEPROM/OTP data, doing it for all chips is incorrect. Remove the code that sets the fast_div bit for all cards, since the documentation for the AR_PHY_CCK_DETECT register says: reg 642: sig_detect_cck enable_ant_fast_div : Only used for single chain chips. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Fix issue with parsing malformed CFP IESujith Manoharan1-0/+2
All QCA chips have the ability to parse the CF Parameter Set IE in beacons. If the IE is malformed in the beacons from some APs [1], the HW locks up. In AP mode, a beacon stuck would happen and in client mode, a disconnection usually is the result. To fix this issue, set the AR_PCU_MISC_MODE2_CFP_IGNORE to ignore the CFP IE in beacons - this is applicable for all chips. For AP mode, if this issue happens, the NAV is also corrupted and has to be reset - this will be done in a subsequent patch. [1] : http://msujith.org/ath9k/cfp/Malformed-CF-Param.png Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-28ath9k: Remove unused ANI commandsSujith Manoharan1-2/+0
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-19ath9k_hw: Fix multicast search for AR9002 familySujith Manoharan1-1/+9
The multicast search bit is disabled for the AR9003 family, but this is required for AR9002 too. Fix this in the INI override routine. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-03ath9k: Do not maintain ANI state per-channelSujith Manoharan1-2/+2
ANI state can be maintained globally instead of per-channel. This reduces memory usage and since default values are used during a scan run, per-channel state is not required. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-03ath9k: Set ofdmWeakSigDetect directlySujith Manoharan1-1/+1
The macros ATH9K_ANI_USE_OFDM_WEAK_SIG can be removed. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10ath9k_hw: make various ar5416/ar91xx rf banks constFelix Fietkau1-55/+20
Banks 0-3,7 are neither modified at run time, nor SREV dependent. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10ath9k_hw: clean up RF Bank6 handling on AR5416/AR91xxFelix Fietkau1-21/+10
There are two sets of initvals for this RF bank, one with TPC support and one without. The TPC one always gets used, so remove the other one to avoid confusion. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-08ath9k_hw: use the devres API for allocationsFelix Fietkau1-35/+15
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-22ath9k_hw: rename mrcCCKOff to fix smatch warningRajkumar Manoharan1-2/+2
Rename mrcCCKOff for better code readability and also fixes the smatch warning. drivers/net/wireless/ath/ath9k/ar9003_phy.c:982 ar9003_hw_ani_control() Error invalid range 1 to 0. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-20ath9k_hw: clean up defines and variables from the ANI implementation splitFelix Fietkau1-10/+10
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-20ath9k_hw: remove the old ANI implementationFelix Fietkau1-140/+2
It was found to be buggy on a variety of chipsets from AR913x to AR928x. The new version (which was introduced along with AR93xx support) is more reliable in preventing connectivity dropouts and also fixes MIB interrupt storm issues. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-20ath9k_hw: remove confusing logic inversion in an ANI variableFelix Fietkau1-9/+9
Code using this had already triggered smatch complaints, so remove it before it gets fixed the wrong way. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: drivers/net/ethernet/intel/e1000e/param.c drivers/net/wireless/iwlwifi/iwl-agn-rx.c drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c drivers/net/wireless/iwlwifi/iwl-trans.h Resolved the iwlwifi conflict with mainline using 3-way diff posted by John Linville and Stephen Rothwell. In 'net' we added a bug fix to make iwlwifi report a more accurate skb->truesize but this conflicted with RX path changes that happened meanwhile in net-next. In e1000e a conflict arose in the validation code for settings of adapter->itr. 'net-next' had more sophisticated logic so that logic was used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23ath9k_hw: fix and clean up PHY activation delayFelix Fietkau1-15/+2
The delay calculation is the same for all chips, however some parts of the code missed the extra delay factor for half/quarter. Clean up the code and move the delay calculation to a common place. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-23ath9k: add an extra boolean parameter to ath9k_hw_apply_txpowerGabor Juhos1-1/+1
In order to unifying regulatory limit handling commit ca2c68cc7bc80fc4504fb420df04cce99c9ee6ec (ath9k_hw: clean up tx power handling) introduced a new helper function 'ath9k_hw_apply_txpower', and the direct calls of 'ah->eep_ops->set_txpower' has been replaced by a call of the helper function. This caused a change in the behaviour of the 'ath9k_hw_set_txpowerlimit' function. The purpose of that function is to calculate and store the rate txpower table and the regulatory limit without touching the hardware registers. Before the commit, the 'test' parameter of the function was passed to the 'ah->eep_ops->set_txpower'. Now the calling of the 'set_txpower' function happens indirectly through 'ath9k_hw_apply_txpower', so the 'test' argument of the 'set_txpower' is always 'false'. This patch restores the original behaviour of 'ath9k_hw_set_txpowerlimit' by adding a new argument to 'ath9k_hw_apply_txpower.' Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12ath9k: remove dead codeZefir Kurtisi1-1/+0
Clean up some orphaned code lines containing * unused variables (not referenced / write-only) * non-implemented function prototypes Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10ath9k_hw: improve ANI processing and rx desensitizing parametersRajkumar Manoharan1-38/+0
This patch improves ANI operations by switching among the immunity levels based on PHY errors and beacon rssi which will adjust receiver desensitizing parameters. The changes are * Configure the Weak Signal Detection based on current immunity value. * At highest OFDM immunity level poor performance was observed with strong interference. By tuning the FIR step and spur immunity levels and not changing any weak signal detection thresholds at any level helped to improve the performance. * ANI took long time to recover back to lower immunity levels on heavy data load. As the listen time got reset to zero before reaching to the 5x of aniperiod, the immunity level is not lowering back even without any interference. This patch fix that. Cc: Paul Stewart <pstew@google.com> Cc: Susinder Gulasekaran <susinder@qca.qualcomm.com> Signed-off-by: Suresh Chandrasekaran <csuresh@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k: inline AR9271 1.0 INI overridesFelix Fietkau1-3/+4
Makes them more readable and reduces code size Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k_hw: remove iniModes_*_tx_gain_9271Felix Fietkau1-9/+0
Program tx gain through iniModesTxGain like on AR9287 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k_hw: clean up iniModesAdditionalFelix Fietkau1-3/+2
use iniModesFastClock for 5 ghz fast clock specific settings, and iniAdditional for clock/chip specific initval overrides Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-21ath9k_hw: prevent writes to const data on AR9160Felix Fietkau1-24/+1
Duplicate the data for iniAddac early on, to avoid having to do redundant memcpy calls later. While we're at it, make AR5416 < v2.2 use the same codepath. Fixes a reported crash on x86. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Magnus Määttä <magnus.maatta@logica.com> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19ath: Convert ath_dbg(bar, ATH_DBG_<FOO>, to ath_dbg(bar, FOOJoe Perches1-23/+19
Add ATH_DBG_ to macros to shorten the uses and reduce the line count. Coalesce ath_dbg formats. Add missing spaces to coalesced formats. Add missing newline terminations to ath_dbg formats. Align ath_dbg arguments where appropriate. Standardize ath_dbg formats without periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12ath9k_hw: clean up tx power handlingFelix Fietkau1-10/+1
The code for handling various restrictions concerning regulatory limits, antenna gain, etc. is very convoluted and duplicated across various EEPROM parsing implementations, making it hard to review. This patch partially cleans up the mess by unifying regulatory limit handling in one function and simplifying handling of antenna gain. It also removes unused transmit power scaling arrays from the EEPROM code, which belonged to an unimplemented API that isn't supposed to be in the driver anyway. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19ath9k_hw: remove ar9100_hw_compute_pll_controlFelix Fietkau1-11/+1
AR913x uses the same PLL register layout as AR9160 and later. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19ath9k_hw: fix setting the hardware diversity flagFelix Fietkau1-11/+3
ath9k_hw_set_diversity is only called from init.c where it cannot affect the hardware setting because it's cleared on the next reset. Instead of using a PHY op for something that's supposed to be initialized statically, set the register value directly in the INI override function. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19ath9k_hw: remove dead code in the eeprom opsFelix Fietkau1-1/+2
The eeprom .set_addac function is only necessary for AR9160, remove it from eeprom_4k.c and remove the dummy function from eeprom_9287.c Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19ath9k_hw: clean up hardware revision checksFelix Fietkau1-2/+1
- AR_SREV_5416_20_OR_LATER is always true, remove it - AR_SREV_9280_20_OR_LATER is always true within eeprom_4k.c and eeprom_9287.c - (AR_SREV_9271 || AR_SREV_9285) is always true in eeprom_4k.c Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-29 02:28:24 +0300