summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2012-07-12ath9k_hw: Add hardware code for WoWMohammed Shafi Shajakhan1-0/+1
add a new file wow.c which takes care of the hardware code for WoW. *program the descriptors and data words to periodically send Keep Alive Frames. *program the user defined patterns/masks and pattern length in the hardware registers. *'ath9k_hw_wow_enable' is called during the drivers suspend callback which takes care of the following - tracking wow event mask (to suppress spurious wow events) - properly configure suspend/resume WAR registers - configure PCIE PM control register - configure MAC WoW registers and their timeouts - enabling wow configuration like magic packet, user patterns based on users configuration - configuring timeouts for KAL, beacon miss, aifs, slot time, backoff - create Keep Alive Pattern ('KAL') *'ath9k_hw_wow_wakeup' is called during the drivers resume callback which takes care of the following - primary task is to find the reason for wakeup from the wow status register - configure/restore AR_PCIE_PM_CTRL register - clear all WoW events - configure/restore suspend/resume WAR registers Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Cc: vadivel@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06ath9k: Move LNA code to antenna.cSujith Manoharan1-1/+2
And use a helper function to setup antennae after a reset. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06ath9k: Group link monitoring logicSujith Manoharan1-1/+2
Add link.c and move all the link/connection monitoring code to it. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12ath9k: add DFS pattern detectorZefir Kurtisi1-1/+4
This adds a DFS pattern detector to ath9k. It is fed with pulse events by the radar pulse detector and reports in place whether a pattern was detected. On detection, the result is reported as radar event to the DFS management component in the upper layer. Currently the ETSI DFS domain is supported with detector lines for the patterns defined by EN-301-893 v1.5.1. Support for FCC and JP will be added gradually. To include the pattern detector, ath9k must be built with support for DFS certified config flag set (CONFIG_ATH9K_DFS_CERTIFIED). Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: Use CONFIG_ATH9K_BTCOEX_SUPPORTSujith Manoharan1-3/+3
Make use of CONFIG_ATH9K_BTCOEX_SUPPORT in ath9k_hw to provide a clean way of compilation without BTCOEX support. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Use CONFIG_ATH9K_BTCOEX_SUPPORTSujith Manoharan1-2/+2
This patch uses CONFIG_ATH9K_BTCOEX_SUPPORT to conditionally compile btcoex-related code in the driver core. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15ath9k: add DFS radar pulse processingZefir Kurtisi1-0/+2
This initial DFS module provides basic functionality to deal with radar pulses reported by the Atheros DFS HW pulse detector. The reported data is evaluated and basic plausibility checks are performed to filter false pulses. Passing radar pulses are forwarded to pattern detectors which are not yet implemented. (Some modifications to actually use ATH9K_DFS_DEBUGFS based on comments from Julian Calaby <julian.calaby@gmail.com>. -- JWL) Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-01ath9k_hw: Add MCI h/w code and state machineMohammed Shafi Shajakhan1-1/+2
Cc: Wilson Tsao <wtsao@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09ath9k: Add btcoex profile management support for AR9462Rajkumar Manoharan1-0/+1
AR9462 chips have the capabilities to provoide bluetooth profile information. For non-AR9462 btcoex chips, the BT priority traffic was identified by periodically polling the respective registers and updated dutycycle, stomptype, etc. As AR9462 chip offers the BT profile informations, let us make use of that to update aggregation limit, dutycycle, stomptype and wieghtages. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Add radio retention support for AR9480Rajkumar Manoharan1-0/+1
Supported calibrations of radio retention table (RTT) are - DC offset - Filter - Peak detect Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Move debug code to a separate fileSujith Manoharan1-0/+2
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k: introduce ATH9K_{PCI,AHB} config optionsGabor Juhos1-2/+2
Currently ath9k only available in menuconfig if PCI bus support is enabled. However the driver is required for the built-in wireless MACs of the Atheros AR9130/AR9132 SoCs. These SoCs have no PCI controller, the wireless MAC is connected to the AHB bus on them. Introduce separated config options for the supported buses, in order to allow building of ath9h without PCI bus support. As a bonus, this patch removes the cross-reference of the ATHEROS_AR71XX option which is not present in the kernel. Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-28ath9k: remove support for virtual wiphysFelix Fietkau1-1/+0
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-21ath9k: make the driver specific rate control module optionalFelix Fietkau1-1/+1
ath9k can use minstrel_ht instead, so it makes sense to save some space here. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-25ath9k_htc: Add support for bluetooth coexistence.Vivek Natarajan1-1/+2
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14ath9k_hw: add functions for controlling PA predistortion calibrationFelix Fietkau1-1/+2
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: move AR9002 mac ops to its own fileLuis R. Rodriguez1-0/+1
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: Implement AR9003 eeprom callbacksSenthil Balasubramanian1-1/+2
Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: split the generic hardware code by hardware familyLuis R. Rodriguez1-1/+4
Move out the generic hardware family code out into their own files, we have one for AR5008, AR9001, and AR9002 family (ar9002_hw.c) and another file for the new AR9003 hardware family (ar9003_hw.c). Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: split calib code by hardware familiesLuis R. Rodriguez1-1/+3
Calibration code touches phy registers and since these change the calibration code needs to be abstracted. Noise floor calibration is the only thing remaining but since the remaining calls only touch the AR_PHY_AGC_CONTROL register we'll just define that register conditionally, that will be done separately. The goal is to remove the dependency of ar9002_phy.h on calib.c This also adds stubs to be filled for AR9003 calibration code. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: Fill rx_enable() for the AR9003 hardware familyVasanthakumar Thiagarajan1-0/+1
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: Add AR9003 PHY supportLuis R. Rodriguez1-0/+1
This add stubs for PHY support for the AR9003 hardware family. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: Move some RF ops to the private callbacksLuis R. Rodriguez1-1/+2
The PHY split is easier done in a few steps. First move the RF ops to the private ops and rename them accordingly. We split PHY stuff up first for the AR5008 and AR9002 families. There are some callbacks that AR9002 share with the AR5008 familiy so we set those first, if AR9002 has some different callbacks it will override them upon hardware init. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-23ath9k_htc: Support for AR9271 chipset.Sujith1-0/+10
Features: * Station mode * IBSS mode * Monitor mode * Legacy support * HT support * TX/RX 11n Aggregation * HW encryption * LED * Suspend/Resume For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12ath9k: Add new file init.cSujith1-0/+1
Move initialization/de-initialization related code to this file. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12ath9k: Add a new file for GPIOSujith1-0/+1
Move all LED/RFKILL/BTCOEX related code to gpio.c Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28ath9k: separate debugfs support from CONFIG_ATH_DEBUGFelix Fietkau1-1/+1
In my setups, ath9k's debugfs files are most of the time much more useful than the messages generated by enabling CONFIG_ATH_DEBUG along with the right debug flags. Since CONFIG_ATH_DEBUG comes with a noticeable overhead on embedded systems, this patch makes it possible to use the debugfs files without that option. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-12ath9k_common: add new module to share 802.11n driver helpersLuis R. Rodriguez1-0/+3
ath9k and ath9k_htc share a lot of common hardware characteristics. They only differ in that ath9k_htc works with a target CPU and ath9k works directly with the hardware. ath9k_htc will do *some* things in the firmware, but a lot of others on the host. The common 802.11n hardware code is already shared through the ath9k_hw module. Common helpers amongst all Atheros drivers can use the ath module, this includes ath5k and ar9170 as users. But there is some common driver specific helpers which are not exactly hardware code which ath9k and ath9k_htc can share. We'll be using ath9k_common for this to avoid bloating the ath module and the common 802.11n hardware module ath9k_hw. We start by sharing skb pre and post processing in preparation for a hand off to mac80211. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08ath9k: move hw code to its own moduleLuis R. Rodriguez1-13/+14
hw code for Atheros 802.11n hardware is commmon between different chipsets. This moves this code into a separate module, the next expected user of this code will be the ath9k_htc module. The ath9k/ dir is now selected by ATH9K_HW, an option which gets selected by either ath9k or ath9k_htc, but remains invisible for user menuconfig configuration. If either ath9k or ath9k_htc will be compiled into the kernel ath9k_hw will also be compiled in. Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08atheros: move bus ops to ath_commonLuis R. Rodriguez1-2/+1
This is the last part to make ath9k hw code core driver agnostic. I believe ath9k_htc can now use use the hw code unmodified. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08ath9k: move ATH9K_RSSI_BAD to hw.hLuis R. Rodriguez1-4/+3
mac.c is now core driver independent. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08ath9k: clarify what hw code is and remove ath9k.h from a few filesLuis R. Rodriguez1-5/+9
hw code will be shared between ath9k and ath9k_htc. Just a few more files are left to clean up, mark them as well. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Move btcoex stuff from hw.[ch] to new btcoex.[ch]Vasanthakumar Thiagarajan1-1/+2
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: Split eeprom.c into manageable piecesSujith1-0/+3
Add eeprom_def.c, eeprom_4k.c and eeprom_9287.c This improves maintainability. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-23atheros: put atheros wireless drivers into ath/Luis R. Rodriguez1-0/+18
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-28 03:26:39 +0300