summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath11k
AgeCommit message (Collapse)AuthorFilesLines
2022-09-22wifi: ath11k: add get_txpower mac opsAditya Kumar Singh1-0/+92
Driver does not support get_txpower mac ops because of which cfg80211 returns vif->bss_conf.txpower to user space. bss_conf.txpower gets its value from ieee80211_channel->max_reg_power. However, the final txpower is dependent on few other parameters apart from max regulatory supported power. It is the firmware which knows about all these parameters and considers the minimum for each packet transmission. All ath11k firmware reports the final tx power in firmware pdev stats which falls under fw_stats. Add get_txpower mac ops to get the tx power from firmware leveraging fw_stats and return it accordingly. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220603082814.31466-3-quic_adisi@quicinc.com
2022-09-22wifi: ath11k: move firmware stats out of debugfsAditya Kumar Singh5-114/+137
Currently, firmware stats, comprising pdev, vdev and beacon stats are part of debugfs. In firmware pdev stats, firmware reports the final Tx power used to transmit each packet. If driver wants to know the final Tx power being used at firmware level, it can leverage from firmware pdev stats. Move firmware stats out of debugfs context in order to leverage the final Tx power reported in it even when debugfs is disabled. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220603082814.31466-2-quic_adisi@quicinc.com
2022-09-22wifi: ath11k: fix failed to find the peer with peer_id 0 when disconnectedWen Gong1-1/+2
It has a fail log which is ath11k_dbg in ath11k_dp_rx_process_mon_status(), as below, it will not print when debug_mask is not set ATH11K_DBG_DATA. ath11k_dbg(ab, ATH11K_DBG_DATA, "failed to find the peer with peer_id %d\n", ppdu_info.peer_id); When run scan with station disconnected, the peer_id is 0 for case HAL_RX_MPDU_START in ath11k_hal_rx_parse_mon_status_tlv() which called from ath11k_dp_rx_process_mon_status(), and the peer_id of ppdu_info is reset to 0 in the while loop, so it does not match condition of the check "if (ppdu_info->peer_id == HAL_INVALID_PEERID" in the loop, and then the log "failed to find the peer with peer_id 0" print after the check in the loop, it is below call stack when debug_mask is set ATH11K_DBG_DATA. The reason is this commit 01d2f285e3e5 ("ath11k: decode HE status tlv") add "memset(ppdu_info, 0, sizeof(struct hal_rx_mon_ppdu_info))" in ath11k_dp_rx_process_mon_status(), but the commit does not initialize the peer_id to HAL_INVALID_PEERID, then lead the check mis-match. Callstack of the failed log: [12335.689072] RIP: 0010:ath11k_dp_rx_process_mon_status+0x9ea/0x1020 [ath11k] [12335.689157] Code: 89 ff e8 f9 10 00 00 be 01 00 00 00 4c 89 f7 e8 dc 4b 4e de 48 8b 85 38 ff ff ff c7 80 e4 07 00 00 01 00 00 00 e9 20 f8 ff ff <0f> 0b 41 0f b7 96 be 06 00 00 48 c7 c6 b8 50 44 c1 4c 89 ff e8 fd [12335.689180] RSP: 0018:ffffb874001a4ca0 EFLAGS: 00010246 [12335.689210] RAX: 0000000000000000 RBX: ffff995642cbd100 RCX: 0000000000000000 [12335.689229] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff99564212cd18 [12335.689248] RBP: ffffb874001a4dc0 R08: 0000000000000001 R09: 0000000000000000 [12335.689268] R10: 0000000000000220 R11: ffffb874001a48e8 R12: ffff995642473d40 [12335.689286] R13: ffff99564212c5b8 R14: ffff9956424736a0 R15: ffff995642120000 [12335.689303] FS: 0000000000000000(0000) GS:ffff995739000000(0000) knlGS:0000000000000000 [12335.689323] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12335.689341] CR2: 00007f43c5d5e039 CR3: 000000011c012005 CR4: 00000000000606e0 [12335.689360] Call Trace: [12335.689377] <IRQ> [12335.689418] ? rcu_read_lock_held_common+0x12/0x50 [12335.689447] ? rcu_read_lock_sched_held+0x25/0x80 [12335.689471] ? rcu_read_lock_held_common+0x12/0x50 [12335.689504] ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k] [12335.689578] ? ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k] [12335.689653] ? lock_acquire+0xef/0x360 [12335.689681] ? rcu_read_lock_sched_held+0x25/0x80 [12335.689713] ath11k_dp_service_mon_ring+0x38/0x60 [ath11k] [12335.689784] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k] [12335.689860] call_timer_fn+0xb2/0x2f0 [12335.689897] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k] [12335.689970] run_timer_softirq+0x21f/0x540 [12335.689999] ? ktime_get+0xad/0x160 [12335.690025] ? lapic_next_deadline+0x2c/0x40 [12335.690053] ? clockevents_program_event+0x82/0x100 [12335.690093] __do_softirq+0x151/0x4a8 [12335.690135] irq_exit_rcu+0xc9/0x100 [12335.690165] sysvec_apic_timer_interrupt+0xa8/0xd0 [12335.690189] </IRQ> [12335.690204] <TASK> [12335.690225] asm_sysvec_apic_timer_interrupt+0x12/0x20 Reset the default value to HAL_INVALID_PEERID each time after memset of ppdu_info as well as others memset which existed in function ath11k_dp_rx_process_mon_status(), then the failed log disappeared. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: 01d2f285e3e5 ("ath11k: decode HE status tlv") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220518033556.31940-1-quic_wgong@quicinc.com
2022-09-22wifi: ath11k: change complete() to complete_all() for scan.completedWen Gong2-2/+2
Currently commit 1f682dc9fb37 ("ath11k: reduce the wait time of 11d scan and hw scan while add interface") introduced a wait_for_completion_timeout operation for ar->scan.completed, another one is existed in ath11k_scan_stop(), then ath11k has two places to wait for the ar->scan.completed and they run in different thread, thus it is possible to happend that the two thread both enter wait status. To handle this scenario, ath11k should change the complete() to complete_all() for the ar->scan.completed. This also work well when it is only one thread wait for ar->scan.completed. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220919024413.25083-1-quic_wgong@quicinc.com
2022-09-19wifi: ath11k: Add WoW support for WCN6750Manikanta Pubbisetty7-1/+191
Add support for WoW on WCN6750 chipset. Unlike other chips where WoW exit happens after sending WoW wakeup WMI command, exit from WoW suspend in the case of WCN6750 happens upon sending a WoW exit SMP2P (Shared memory point to point) message to the firmware. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220902112520.24804-3-quic_mpubbise@quicinc.com
2022-09-19wifi: ath11k: Include STA_KEEPALIVE_ARP_RESPONSE TLV header by defaultBaochen Qiang2-5/+6
In current code STA_KEEPALIVE_ARP_RESPONSE TLV header is included only when ARP method is used, this causes firmware always to crash when wowlan is enabled because firmware needs it to be present no matter ARP method is used or not. Fix this issue by including STA_KEEPALIVE_ARP_RESPONSE TLV header by default. Also fix below typo: s/WMI_TAG_STA_KEEPALVE_ARP_RESPONSE/WMI_TAG_STA_KEEPALIVE_ARP_RESPONSE/ Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: 0f84a156aa3b ("ath11k: Handle keepalive during WoWLAN suspend and resume") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220913044358.2037-1-quic_bqiang@quicinc.com
2022-09-16wifi: ath11k: Fix kernel-doc issuesJeff Johnson3-26/+21
Fix documentation issues reported by kernel-doc: - Incorrect use of /** for non-kernel-doc comments - Mismatch between documented and actual identifiers - Incorrect identifier syntax Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220909151246.22961-1-quic_jjohnson@quicinc.com
2022-09-16wifi: ath11k: Fix miscellaneous spelling errorsJeff Johnson17-28/+28
Fix misspellings flagged by 'codespell'. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220909145535.20437-1-quic_jjohnson@quicinc.com
2022-09-10wifi: ath11k: Increase TCL data ring size for WCN6750Manikanta Pubbisetty4-1/+11
Increase TCL data ring size to 2048 for WCN6750. This is needed to meet 160 MHz TX throughput. Add a new hw_param to indicate the TX ring size for individual devices. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220905071805.31625-4-quic_mpubbise@quicinc.com
2022-09-10wifi: ath11k: Add multi TX ring support for WCN6750Manikanta Pubbisetty10-30/+175
Currently in the case of WCN6750, only one TCL ring is used for TX, this is limiting the TX throughput in 160 MHz case, enabling multiple TCL rings on WCN6750 has shown an improvement of nearly 300 Mbps in the case of TCP TX, therefore add the support of multi TX ring for WCN6750. Currently TCL ring is selected based on CPU ID, this logic cannot be applied for WCN6750 as there is chance of out of order TX of packets and to avoid this, choose TCL ring based on flow hash so that packets of the same flow will end up on same TCL ring. For the same reason, TCL ring retry logic is also not applicable for WCN6750. Also the mapping of TCL, WBM & RBM IDs for WCN6750 is different from existing devices. Create a new TCM/WBM/RBM mapping for WCN6750. Change does not impact existing ath11k devices. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220905071805.31625-3-quic_mpubbise@quicinc.com
2022-09-10wifi: ath11k: Enable threaded NAPIManikanta Pubbisetty2-0/+2
Enable threaded NAPI on all ath11k targets. Unlike traditional NAPI poll which runs in softirq context and on the core which scheduled the NAPI, threaded NAPI makes use of kernel threads which are under direct control of the scheduler and helps in balancing the NAPI processing load across multiple CPUs thereby improving throughput. In the case of WCN6750, enabling threaded NAPI has improved 160 MHz RX throughput by nearly 400 Mbps. Similar gains can be expected on other ath11k devices as well. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220905071805.31625-2-quic_mpubbise@quicinc.com
2022-09-10wifi: ath11k: mhi: fix potential memory leak in ath11k_mhi_register()Jianglei Nie1-7/+10
mhi_alloc_controller() allocates a memory space for mhi_ctrl. When gets some error, mhi_ctrl should be freed with mhi_free_controller(). But when ath11k_mhi_read_addr_from_dt() fails, the function returns without calling mhi_free_controller(), which will lead to a memory leak. We can fix it by calling mhi_free_controller() when ath11k_mhi_read_addr_from_dt() fails. Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220907073704.58806-1-niejianglei2021@163.com
2022-09-10wifi: ath11k: implement SRAM dump debugfs interfaceBaochen Qiang8-0/+138
On-board SRAM contains valuable information for firmware debugging so add a new file named "sram" to debugfs with which we can dump SRAM content using following the following: cp /sys/kernel/debug/ath11k/wcn6855\ hw2.0/sram /tmp/sram Currently this feature is enabled for QCA6390 and WCN6855. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220802075533.1744-3-quic_bqiang@quicinc.com
2022-09-10wifi: ath11k: Split PCI write/read functionsBaochen Qiang1-18/+32
ath11k_pcic_write32/read32 tries to do wake up before doing actual write/read work, which means each time a u32 is written/read, wake up is performed. This is not necessary in case where we do a large amount of write/read, because only one time of wake up is needed. So split each one into two parts, the first part does wake up and release, and the second one does actual write/read work. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220802075533.1744-2-quic_bqiang@quicinc.com
2022-09-07ath11k: Enable remain-on-channel support on WCN6750Manikanta Pubbisetty1-1/+1
Enable remain on channel support on WCN6750 as it is needed for GAS, Passpoint. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220901080656.3450-1-quic_mpubbise@quicinc.com
2022-09-06wifi: mac80211: make smps_mode per-linkBenjamin Berg1-3/+3
The SMPS power save mode needs to be per-link rather than being shared for all links. As such, move it into struct ieee80211_link_sta. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-02wifi: ath11k: Add support to connect to non-transmit MBSSID profilesManikanta Pubbisetty4-0/+28
Add support to connect to a non-transmit MBSSID AP profile. Non-transmit MBSSID profile parameters are passed to the firmware via WMI VDEV UP command and this helps firmware to track MBSSID profile within the multi-BSS beacon and report beacon loss if any. WCN6750, QCA6390 & WCN6855 firmwares have the support and hence enable the support on these hardwares. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220901080616.29414-1-quic_mpubbise@quicinc.com
2022-09-02wifi: ath11k: Fix hardware restart failure due to twt debugfs failureManikanta Pubbisetty3-28/+25
Currently, creation of debugfs entries for TWT is failing during hardware restart because of the residual TWT files which were created during add_interface(). Since, struct arvif{} is memset to zero upon add_interface() invocation, when the hardware restart is triggered, arvif is memset to 0 and TWT files are attempted to create again which will fail because of the residual TWT files already in place, this leads to hardware restart failure. Also, it is not a good idea to return error from add_interface() because of debugfs file creation failures. Moreover, debugfs framework can very well handle the errors in it's create file & remove file APIs and the errors returned by these APIs are not checked in most usecases. Fix the HW restart failure by ignoring the errors returned from the debugfs APIs. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Fixes: fe98a6137d03 ("ath11k: add debugfs for TWT debug calls") Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220720135150.22193-3-quic_mpubbise@quicinc.com
2022-09-02wifi: ath11k: Add TWT debugfs support for STA interfaceManikanta Pubbisetty4-36/+123
Currently TWT debugfs files required for manually testing the TWT feature are created only for the AP interfaces; these debugfs hooks are also required for the station interfaces in order to test the TWT feature manually, therefore create these debugfs hooks for station iftype as well. In the case of station interfaces, TWT is entirely handled in the firmware based on input parameters passed to it during association via TWT enable WMI command. In order to manually test this feature, firmware expects to first disable the TWT feature and then send the enable command with sta_cong_timer_ms parameter set to 0. This is true for WCN6750, QCA6390 & WCN6855 hardwares. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220720135150.22193-2-quic_mpubbise@quicinc.com
2022-09-01wifi: ath11k: Add cold boot calibration support on WCN6750Manikanta Pubbisetty4-4/+31
Add cold boot calibration support on WCN6750. Unlike other chipsets where firmware(FW) is restarted after cold boot calibration is completed, it is recommended not to restart the firmware for WCN6750. For WCN6750, FW sends both CAL_DONE & FW_READY QMI indication to the driver after cold boot calibration is completed. QMI message flow for WCN6750 with cold boot support: FW_INIT_DONE to HOST -> CALIBRATION Mode to FW -> CAL_DONE to Host -> FW_READY to Host -> MODE_ON to FW QMI message flow for other chipsets with cold boot support: FW_INIT_DONE to Host -> CALIBRATION Mode to FW -> FW_READY to Host -> Trigger FW restart -> FW_INIT_DONE to HOST -> MODE_ON to FW QMI message flow for chipsets without cold boot support: FW_INIT_DONE to Host -> MODE_ON to FW Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220720134909.15626-3-quic_mpubbise@quicinc.com
2022-09-01wifi: ath11k: Fix incorrect QMI message ID mappingsManikanta Pubbisetty2-5/+43
QMI message IDs for some of the QMI messages were incorrectly defined in the original implementation. These have to be corrected to enable cold boot support on WCN6750. These corrections are applicable for all chipsets and will not impact them. Refactor the code accordingly. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220720134909.15626-2-quic_mpubbise@quicinc.com
2022-09-01wifi: ath11k: Register shutdown handler for WCN6750Manikanta Pubbisetty2-13/+47
When the system shuts down, SMMU driver will be stopped and will not assist in IOVA translations. SMMU driver expects all of its consumers to shutdown before shutting down itself. WCN6750 being one of the consumer device should not perform any DMA operations after the SMMU has shutdown which will otherwise result in SMMU faults. SMMU driver will call the shutdown() callback of all its consumer devices and the consumers shall stop further DMA activity after the invocation of their respective shutdown() callbacks. Register the shutdown() callback to the platform core for WCN6750. Change will not impact other AHB ath11k devices. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220720134710.15523-1-quic_mpubbise@quicinc.com
2022-08-05Merge tag 'trace-v6.0' of ↵Linus Torvalds1-5/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - Runtime verification infrastructure This is the biggest change here. It introduces the runtime verification that is necessary for running Linux on safety critical systems. It allows for deterministic automata models to be inserted into the kernel that will attach to tracepoints, where the information on these tracepoints will move the model from state to state. If a state is encountered that does not belong to the model, it will then activate a given reactor, that could just inform the user or even panic the kernel (for which safety critical systems will detect and can recover from). - Two monitor models are also added: Wakeup In Preemptive (WIP - not to be confused with "work in progress"), and Wakeup While Not Running (WWNR). - Added __vstring() helper to the TRACE_EVENT() macro to replace several vsnprintf() usages that were all doing it wrong. - eprobes now can have their event autogenerated when the event name is left off. - The rest is various cleanups and fixes. * tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits) rv: Unlock on error path in rv_unregister_reactor() tracing: Use alignof__(struct {type b;}) instead of offsetof() tracing/eprobe: Show syntax error logs in error_log file scripts/tracing: Fix typo 'the the' in comment tracepoints: It is CONFIG_TRACEPOINTS not CONFIG_TRACEPOINT tracing: Use free_trace_buffer() in allocate_trace_buffers() tracing: Use a struct alignof to determine trace event field alignment rv/reactor: Add the panic reactor rv/reactor: Add the printk reactor rv/monitor: Add the wwnr monitor rv/monitor: Add the wip monitor rv/monitor: Add the wip monitor skeleton created by dot2k Documentation/rv: Add deterministic automata instrumentation documentation Documentation/rv: Add deterministic automata monitor synthesis documentation tools/rv: Add dot2k Documentation/rv: Add deterministic automaton documentation tools/rv: Add dot2c Documentation/rv: Add a basic documentation rv/include: Add instrumentation helper functions rv/include: Add deterministic automata monitor definition via C macros ...
2022-07-27Revert "ath11k: add support for hardware rfkill for QCA6390"Kalle Valo7-206/+0
This reverts commit ec038c6127fa772d2c5604e329f22371830d5fa6. Tyler reported that on L390 Yoga Thinkpad with QCA6390 the suspend was failing because of this commit. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9 Link: https://bugzilla.kernel.org/show_bug.cgi?id=215881 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220708164656.29549-1-kvalo@kernel.org
2022-07-27wifi: ath11k: Fix register write failure on QCN9074Manikanta Pubbisetty6-69/+128
Commit 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") regressed QCN9074. With the above mentioned commit, writes are failing for some registers on QCN9074 although the device seems to work normally. ath11k_pci 0000:03:00.0: failed to set pcie link register0x01e0e0a8: 0xffffffff != 0x00000010 ath11k_pci 0000:03:00.0: failed to set sysclk: -110 PCIe devices in ath11k (QCA6390, WCN6855, QCN9074, WCN6750) use window concept for register accesses. There are two schemes, dynamic & static window. In dynamic window scheme, a single window(region in the BAR) is mapped either to CE or DP register windows at any give time. QCA6390 & WCN6855 follow this scheme for register accesses. In static window scheme, CE & DP register windows are statically mapped to separate regions with in the BAR so that there is no switching of register windows between CE & DP register accesses. QCN9074 & WCN6750 follow this scheme although the window start offsets are different for QCN9074 & WCN6750. QCN9074 uses 3rd & 2nd window for DP & CE register accesses respectively whereas WCN6750 uses 1st & 2nd window for DP & CE. In QCN9074, along with 2nd & 3rd windows, 1st window is also used for certain configurations which commit 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") did not account for and hence the regression. Fix this by going back to the original way of accessing the registers on QCN9074. Since this diverges from WCN6750 way of accessing registers, it is required to register window_read32/window_write32() pci_ops for WCN6750. We can also get rid of dp_window_idx & ce_window_idx members in hw_params, so remove them. Also add a new API ath11k_pcic_register_pci_ops() for registering pci_ops to the ath11k core. This API checks for mandatory pci_ops() and reports error if those are missing. Also initialize unused pci_ops to NULL. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Fixes: 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") Reported-by: Maxime Bizon <mbizon@freebox.fr> Tested-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220608062954.27792-1-quic_mpubbise@quicinc.com
2022-07-18wifi: ath11k: mac: fix long lineKalle Valo1-1/+2
Recent mac80211 API changes introduced a long line warning in ath11k: drivers/net/wireless/ath/ath11k/mac.c:1404: line length of 92 exceeds 90 columns Compile tested only. Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220708170052.28615-1-kvalo@kernel.org
2022-07-16tracing/ath: Use the new __vstring() helperSteven Rostedt (Google)1-5/+2
Instead of open coding a __dynamic_array() with a fixed length (which defeats the purpose of the dynamic array in the first place). Use the new __vstring() helper that will use a va_list and only write enough of the string into the ring buffer that is needed. Link: https://lkml.kernel.org/r/20220705224749.430339634@goodmis.org Cc: Kalle Valo <kvalo@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: ath11k@lists.infradead.org Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-15wifi: mac80211: replace link_id with link_conf in ↵Gregory Greenman1-2/+2
switch/(un)assign_vif_chanctx() Since mac80211 already has a protected pointer to link_conf, pass it to the driver to avoid additional RCU locking. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: change QoS settings API to take link into accountJohannes Berg1-1/+2
Take the link into account in the QoS settings (EDCA parameters) APIs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: move ps setting to vif configJohannes Berg1-1/+1
This really shouldn't be in a per-link config, we don't want to let anyone control it that way (if anything, link powersave could be forced through APIs to activate/deactivate a link), and we don't support powersave in software with devices that can do MLO. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+2
include/net/sock.h 310731e2f161 ("net: Fix data-races around sysctl_mem.") e70f3c701276 ("Revert "net: set SK_MEM_QUANTUM to 4096"") https://lore.kernel.org/all/20220711120211.7c8b7cba@canb.auug.org.au/ net/ipv4/fib_semantics.c 747c14307214 ("ip: fix dflt addr selection for connected nexthop") d62607c3fe45 ("net: rename reference+tracking helpers") net/tls/tls.h include/net/tls.h 3d8c51b25a23 ("net/tls: Check for errors in tls_device_init") 587903142308 ("tls: create an internal header") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-08Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo1-1/+1
ath.git patches for v5.20. Major changes: ath9k * fix use-after-free in ath9k_hif_usb_rx_cb()
2022-07-08ath11k: Fix typo in commentsZhang Jiaming1-1/+1
There is a typo(isn't') in comments. It maybe 'isn't' instead of 'isn't''. Signed-off-by: Zhang Jiaming <jiaming@nfschina.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220704030004.16484-1-jiaming@nfschina.com
2022-06-29wifi: mac80211: add gfp_t parameter to ieeee80211_obss_color_collision_notifyLorenzo Bianconi1-1/+2
Introduce the capability to specify gfp_t parameter to ieeee80211_obss_color_collision_notify routine since it runs in interrupt context in ieee80211_rx_check_bss_color_collision(). Fixes: 6d945a33f2b0a ("mac80211: introduce BSS color collision detection") Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/02c990fb3fbd929c8548a656477d20d6c0427a13.1655419135.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: return a beacon for a specific linkShaul Triebitz1-1/+1
Pass the link id through to the get_beacon and return the beacon for a specific link id. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: make channel context code MLO-awareJohannes Berg1-0/+2
Make the channel context code MLO aware, along with some functions that it uses, so that the chan.c file is now MLD-clean and no longer uses deflink/bss_conf/etc. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: split bss_info_changed methodJohannes Berg1-1/+1
Split the bss_info_changed method to vif_cfg_changed and link_info_changed, with the latter getting a link ID. Also change the 'changed' parameter to u64 already, we know we need that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move interface config to new structJohannes Berg1-10/+12
We'll use bss_conf for per-link configuration later, so move out all the non-link-specific data out into a new struct ieee80211_vif_cfg used in the vif. Some adjustments were done with the following spatch: @@ expression sdata; struct ieee80211_vif *vifp; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ ( -sdata->vif.bss_conf.var +sdata->vif.cfg.var | -vifp->bss_conf.var +vifp->cfg.var ) @bss_conf@ struct ieee80211_bss_conf *bss_conf; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ -bss_conf->var +vif_cfg->var (though more manual fixups were needed, e.g. replacing "vif_cfg->" by "vif->cfg." in many files.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move some future per-link data to bss_confJohannes Berg2-8/+8
To add MLD, reuse the bss_conf structure later for per-link information, so move some things into it that are per link. Most transformations were done with the following spatch: @@ expression sdata; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -sdata->vif.var +sdata->vif.bss_conf.var @@ struct ieee80211_vif *vif; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -vif->var +vif->bss_conf.var Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-06ath11k: Fix warnings reported by checkpatchManikanta Pubbisetty4-6/+6
Fix warnings reported by checkpatch tool. Below are the errors fixed, drivers/net/wireless/ath/ath11k/hal_rx.c:760: 'recevied' may be misspelled - perhaps 'received? drivers/net/wireless/ath/ath11k/qmi.c:2232: Prefer strscpy over strlcpy drivers/net/wireless/ath/ath11k/qmi.c:2238: Prefer strscpy over strlcpy drivers/net/wireless/ath/ath11k/qmi.c:2662: Prefer strscpy over strlcpy drivers/net/wireless/ath/ath11k/mac.c:7836: 'atleast' may be misspelled - perhaps 'at least'? drivers/net/wireless/ath/ath11k/wmi.c:6566: 'succeded' may be misspelled - perhaps 'succeeded'? Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220602131350.29486-1-quic_mpubbise@quicinc.com
2022-06-06ath11k: Fix LDPC config in set_bitrate_mask hookManikanta Pubbisetty2-3/+3
Currently ar->ht_cap_info is not set anywhere in the code, this could result in LDPC config computed wrongly in the set_bitrate_mask() hook and eventually sending wrong config to the target. Fix this by checking the LDPC support from the band HT capabilities of the radio instead. Furthermore, it looks like firmwares running on the ath11k hardware do not set WMI_HT_CAP_LDPC for advertising the TX LDPC capability, WMI_HT_CAP_TX_LDPC is set instead and this should be checked for getting hardware's TX LDPC support. This is true for QCA6390, WCN6855 & WCN6750 hardware. Also, remove unused variables ht_cap_info & vht_cap_info from struct ath11k{}. Found this during code review. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220602124142.29909-1-quic_mpubbise@quicinc.com
2022-06-06ath11k: Avoid REO CMD failed prints during firmware recoveryManikanta Pubbisetty1-2/+3
Currently when firmware recovery is in progress, we do not queue REO commands to the firmware, instead -ESHUTDOWN will be returned to the caller leading to a failure print on the console. The REO command in the problem scenario is sent for all tids of a peer in which case we will have 16 failure prints on the console for a single peer. For an AP usecase, this count would be even higher in a worst case scenario. Since these commands are bound to fail during firmware recovery, it is better to avoid printing these failures and thereby avoid message flooding on the console. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Fixes: 8ee8d38ca472 ("ath11k: Fix crash during firmware recovery on reo cmd ring access") Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220602122929.18896-1-quic_mpubbise@quicinc.com
2022-06-06ath11k: Fix incorrect debug_mask mappingsManikanta Pubbisetty1-2/+2
Currently a couple of debug_mask entries are mapped to the same value, this could enable unintended driver logging. If enabling DP_TX logs was the intention, then this could also enable PCI logs flooding the dmesg buffer or vice versa. Fix this by correctly assigning the debug masks. Found during code review. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Fixes: aa2092a9bab3f ("ath11k: add raw mode and software crypto support") Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220602115621.15339-1-quic_mpubbise@quicinc.com
2022-06-06ath11k: fix missing skb drop on htc_tx_completion errorChristian 'Ansuel' Marangi1-1/+3
On htc_tx_completion error the skb is not dropped. This is wrong since the completion_handler logic expect the skb to be consumed anyway even when an error is triggered. Not freeing the skb on error is a memory leak since the skb won't be freed anywere else. Correctly free the packet on eid >= ATH11K_HTC_EP_COUNT before returning. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Fixes: f951380a6022 ("ath11k: Disabling credit flow for WMI path") Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220528142516.20819-2-ansuelsmth@gmail.com
2022-05-30ath11k: support avg signal in station dumpThiraviyam Mariyappan3-0/+12
Currently mac80211 doesn't calculate average signal when RSS(Receive side scaling) is enabled from the driver, so average signal isn't printed in the station dump. To address this issue, calculate the average signal from RSSI within driver and display in the station dump. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Signed-off-by: Thiraviyam Mariyappan <quic_tmariyap@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1652965061-30457-1-git-send-email-quic_tmariyap@quicinc.com
2022-05-30ath11k: fix IRQ affinity warning on shutdownJohan Hovold1-0/+2
Make sure to clear the IRQ affinity hint also on shutdown to avoid triggering a WARN_ON_ONCE() in __free_irq() when stopping MHI while using a single MSI vector. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: e94b07493da3 ("ath11k: Set IRQ affinity to CPU0 in case of one MSI vector") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220523143258.24818-1-johan+linaro@kernel.org
2022-05-30ath11k: fix netdev open raceJohan Hovold1-8/+8
Make sure to allocate resources needed before registering the device. This specifically avoids having a racing open() trigger a BUG_ON() in mod_timer() when ath11k_mac_op_start() is called before the mon_reap_timer as been set up. I did not see this issue with next-20220310, but I hit it on every probe with next-20220511. Perhaps some timing changed in between. Here's the backtrace: [ 51.346947] kernel BUG at kernel/time/timer.c:990! [ 51.346958] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ... [ 51.578225] Call trace: [ 51.583293] __mod_timer+0x298/0x390 [ 51.589518] mod_timer+0x14/0x20 [ 51.595368] ath11k_mac_op_start+0x41c/0x4a0 [ath11k] [ 51.603165] drv_start+0x38/0x60 [mac80211] [ 51.610110] ieee80211_do_open+0x29c/0x7d0 [mac80211] [ 51.617945] ieee80211_open+0x60/0xb0 [mac80211] [ 51.625311] __dev_open+0x100/0x1c0 [ 51.631420] __dev_change_flags+0x194/0x210 [ 51.638214] dev_change_flags+0x24/0x70 [ 51.644646] do_setlink+0x228/0xdb0 [ 51.650723] __rtnl_newlink+0x460/0x830 [ 51.657162] rtnl_newlink+0x4c/0x80 [ 51.663229] rtnetlink_rcv_msg+0x124/0x390 [ 51.669917] netlink_rcv_skb+0x58/0x130 [ 51.676314] rtnetlink_rcv+0x18/0x30 [ 51.682460] netlink_unicast+0x250/0x310 [ 51.688960] netlink_sendmsg+0x19c/0x3e0 [ 51.695458] ____sys_sendmsg+0x220/0x290 [ 51.701938] ___sys_sendmsg+0x7c/0xc0 [ 51.708148] __sys_sendmsg+0x68/0xd0 [ 51.714254] __arm64_sys_sendmsg+0x28/0x40 [ 51.720900] invoke_syscall+0x48/0x120 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Fixes: 840c36fa727a ("ath11k: dp: stop rx pktlog before suspend") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220517103436.15867-1-johan+linaro@kernel.org
2022-05-22ath11k: Init hw_params before setting up AHB resourcesManikanta Pubbisetty1-2/+2
As part of adding the support of WCN6750 to ath11k, bus_params were moved to hw_params and this regressed the initialization of WCN6750. By the time AHB resources are setup for WCN6750, hw_params will not be initialized and therefore initialization for WCN6750 will fail. This is applicable only for WCN6750, no other device is impacted. Fix this by moving the initialization of hw_params before setting up AHB resources. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Fixes: 00402f49d26f ("ath11k: Add support for WCN6750 device") Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220517055241.15885-1-quic_mpubbise@quicinc.com
2022-05-22ath11k: Fix warning on variable 'sar' dereference before checkBaochen Qiang1-7/+6
We are seeing below warning: warn: variable dereferenced before check 'sar' Fix it by moving ahead pointer check on 'sar'. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: 652f69ed9c1b ("ath11k: Add support for SAR") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220517004844.2412660-1-quic_bqiang@quicinc.com
2022-05-18ath11k: update missing MU-MIMO and OFDMA statsSriram R2-1/+126
Update the missing MU-MIMO/OFDMA info in PDEV RX, trigger and schedule stats. i.e HTT stats type 10, 12 and 17 respectively. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4-01209-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1652152236-12038-1-git-send-email-quic_srirrama@quicinc.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 01:37:36 +0300