summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath11k/wmi.c
AgeCommit message (Collapse)AuthorFilesLines
2022-01-27ath11k: avoid deadlock by change ieee80211_queue_work for regd_update_workWen Gong1-1/+1
[ Upstream commit ed05c7cf1286d7e31e7623bce55ff135723591bf ] When enable debug config, it print below warning while shut down wlan interface shuh as run "ifconfig wlan0 down". The reason is because ar->regd_update_work is ran once, and it is will call wiphy_lock(ar->hw->wiphy) in function ath11k_regd_update() which is running in workqueue of ieee80211_local queued by ieee80211_queue_work(). Another thread from "ifconfig wlan0 down" will also accuqire the lock by wiphy_lock(sdata->local->hw.wiphy) in function ieee80211_stop(), and then it call ieee80211_stop_device() to flush_workqueue(local->workqueue), this will wait the workqueue of ieee80211_local finished. Then deadlock will happen easily if the two thread run meanwhile. Below warning disappeared after this change. [ 914.088798] ath11k_pci 0000:05:00.0: mac remove interface (vdev 0) [ 914.088806] ath11k_pci 0000:05:00.0: mac stop 11d scan [ 914.088810] ath11k_pci 0000:05:00.0: mac stop 11d vdev id 0 [ 914.088827] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0) [ 914.088841] ath11k_pci 0000:05:00.0: send 11d scan stop vdev id 0 [ 914.088849] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0 [ 914.088856] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0 [ 914.096434] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16 [ 914.096442] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1) [ 914.096481] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0) [ 914.096491] ath11k_pci 0000:05:00.0: WMI vdev delete id 0 [ 914.111598] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16 [ 914.111628] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1) [ 914.114659] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 20 [ 914.114742] ath11k_pci 0000:05:00.0: htc rx completion ep 2 skb pK-error [ 914.115977] ath11k_pci 0000:05:00.0: vdev delete resp for vdev id 0 [ 914.116685] ath11k_pci 0000:05:00.0: vdev 00:03:7f:29:61:11 deleted, vdev_id 0 [ 914.117583] ====================================================== [ 914.117592] WARNING: possible circular locking dependency detected [ 914.117600] 5.16.0-rc1-wt-ath+ #1 Tainted: G OE [ 914.117611] ------------------------------------------------------ [ 914.117618] ifconfig/2805 is trying to acquire lock: [ 914.117628] ffff9c00a62bb548 ((wq_completion)phy0){+.+.}-{0:0}, at: flush_workqueue+0x87/0x470 [ 914.117674] but task is already holding lock: [ 914.117682] ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211] [ 914.117872] which lock already depends on the new lock. [ 914.117880] the existing dependency chain (in reverse order) is: [ 914.117888] -> #3 (&rdev->wiphy.mtx){+.+.}-{4:4}: [ 914.117910] __mutex_lock+0xa0/0x9c0 [ 914.117930] mutex_lock_nested+0x1b/0x20 [ 914.117944] reg_process_self_managed_hints+0x3a/0xb0 [cfg80211] [ 914.118093] wiphy_regulatory_register+0x47/0x80 [cfg80211] [ 914.118229] wiphy_register+0x84f/0x9c0 [cfg80211] [ 914.118353] ieee80211_register_hw+0x6b1/0xd90 [mac80211] [ 914.118486] ath11k_mac_register+0x6af/0xb60 [ath11k] [ 914.118550] ath11k_core_qmi_firmware_ready+0x383/0x4a0 [ath11k] [ 914.118598] ath11k_qmi_driver_event_work+0x347/0x4a0 [ath11k] [ 914.118656] process_one_work+0x228/0x670 [ 914.118669] worker_thread+0x4d/0x440 [ 914.118680] kthread+0x16d/0x1b0 [ 914.118697] ret_from_fork+0x22/0x30 [ 914.118714] -> #2 (rtnl_mutex){+.+.}-{4:4}: [ 914.118736] __mutex_lock+0xa0/0x9c0 [ 914.118751] mutex_lock_nested+0x1b/0x20 [ 914.118767] rtnl_lock+0x17/0x20 [ 914.118783] ath11k_regd_update+0x15a/0x260 [ath11k] [ 914.118841] ath11k_regd_update_work+0x15/0x20 [ath11k] [ 914.118897] process_one_work+0x228/0x670 [ 914.118909] worker_thread+0x4d/0x440 [ 914.118920] kthread+0x16d/0x1b0 [ 914.118934] ret_from_fork+0x22/0x30 [ 914.118948] -> #1 ((work_completion)(&ar->regd_update_work)){+.+.}-{0:0}: [ 914.118972] process_one_work+0x1fa/0x670 [ 914.118984] worker_thread+0x4d/0x440 [ 914.118996] kthread+0x16d/0x1b0 [ 914.119010] ret_from_fork+0x22/0x30 [ 914.119023] -> #0 ((wq_completion)phy0){+.+.}-{0:0}: [ 914.119045] __lock_acquire+0x146d/0x1cf0 [ 914.119057] lock_acquire+0x19b/0x360 [ 914.119067] flush_workqueue+0xae/0x470 [ 914.119084] ieee80211_stop_device+0x3b/0x50 [mac80211] [ 914.119260] ieee80211_do_stop+0x5d7/0x830 [mac80211] [ 914.119409] ieee80211_stop+0x45/0x180 [mac80211] [ 914.119557] __dev_close_many+0xb3/0x120 [ 914.119573] __dev_change_flags+0xc3/0x1d0 [ 914.119590] dev_change_flags+0x29/0x70 [ 914.119605] devinet_ioctl+0x653/0x810 [ 914.119620] inet_ioctl+0x193/0x1e0 [ 914.119631] sock_do_ioctl+0x4d/0xf0 [ 914.119649] sock_ioctl+0x262/0x340 [ 914.119665] __x64_sys_ioctl+0x96/0xd0 [ 914.119678] do_syscall_64+0x3d/0xd0 [ 914.119694] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 914.119709] other info that might help us debug this: [ 914.119717] Chain exists of: (wq_completion)phy0 --> rtnl_mutex --> &rdev->wiphy.mtx [ 914.119745] Possible unsafe locking scenario: [ 914.119752] CPU0 CPU1 [ 914.119758] ---- ---- [ 914.119765] lock(&rdev->wiphy.mtx); [ 914.119778] lock(rtnl_mutex); [ 914.119792] lock(&rdev->wiphy.mtx); [ 914.119807] lock((wq_completion)phy0); [ 914.119819] *** DEADLOCK *** [ 914.119827] 2 locks held by ifconfig/2805: [ 914.119837] #0: ffffffffba3dc010 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x17/0x20 [ 914.119872] #1: ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211] [ 914.120039] stack backtrace: [ 914.120048] CPU: 0 PID: 2805 Comm: ifconfig Tainted: G OE 5.16.0-rc1-wt-ath+ #1 [ 914.120064] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011 [ 914.120074] Call Trace: [ 914.120084] <TASK> [ 914.120094] dump_stack_lvl+0x73/0xa4 [ 914.120119] dump_stack+0x10/0x12 [ 914.120135] print_circular_bug.isra.44+0x221/0x2e0 [ 914.120165] check_noncircular+0x106/0x150 [ 914.120203] __lock_acquire+0x146d/0x1cf0 [ 914.120215] ? __lock_acquire+0x146d/0x1cf0 [ 914.120245] lock_acquire+0x19b/0x360 [ 914.120259] ? flush_workqueue+0x87/0x470 [ 914.120286] ? lockdep_init_map_type+0x6b/0x250 [ 914.120310] flush_workqueue+0xae/0x470 [ 914.120327] ? flush_workqueue+0x87/0x470 [ 914.120344] ? lockdep_hardirqs_on+0xd7/0x150 [ 914.120391] ieee80211_stop_device+0x3b/0x50 [mac80211] [ 914.120565] ? ieee80211_stop_device+0x3b/0x50 [mac80211] [ 914.120736] ieee80211_do_stop+0x5d7/0x830 [mac80211] [ 914.120906] ieee80211_stop+0x45/0x180 [mac80211] [ 914.121060] __dev_close_many+0xb3/0x120 [ 914.121081] __dev_change_flags+0xc3/0x1d0 [ 914.121109] dev_change_flags+0x29/0x70 [ 914.121131] devinet_ioctl+0x653/0x810 [ 914.121149] ? __might_fault+0x77/0x80 [ 914.121179] inet_ioctl+0x193/0x1e0 [ 914.121194] ? inet_ioctl+0x193/0x1e0 [ 914.121218] ? __might_fault+0x77/0x80 [ 914.121238] ? _copy_to_user+0x68/0x80 [ 914.121266] sock_do_ioctl+0x4d/0xf0 [ 914.121283] ? inet_stream_connect+0x60/0x60 [ 914.121297] ? sock_do_ioctl+0x4d/0xf0 [ 914.121329] sock_ioctl+0x262/0x340 [ 914.121347] ? sock_ioctl+0x262/0x340 [ 914.121362] ? exit_to_user_mode_prepare+0x13b/0x280 [ 914.121388] ? syscall_enter_from_user_mode+0x20/0x50 [ 914.121416] __x64_sys_ioctl+0x96/0xd0 [ 914.121430] ? br_ioctl_call+0x90/0x90 [ 914.121445] ? __x64_sys_ioctl+0x96/0xd0 [ 914.121465] do_syscall_64+0x3d/0xd0 [ 914.121482] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 914.121497] RIP: 0033:0x7f0ed051737b [ 914.121513] Code: 0f 1e fa 48 8b 05 15 3b 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e5 3a 0d 00 f7 d8 64 89 01 48 [ 914.121527] RSP: 002b:00007fff7be38b98 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 914.121544] RAX: ffffffffffffffda RBX: 00007fff7be38ba0 RCX: 00007f0ed051737b [ 914.121555] RDX: 00007fff7be38ba0 RSI: 0000000000008914 RDI: 0000000000000004 [ 914.121566] RBP: 00007fff7be38c60 R08: 000000000000000a R09: 0000000000000001 [ 914.121576] R10: 0000000000000000 R11: 0000000000000202 R12: 00000000fffffffe [ 914.121586] R13: 0000000000000004 R14: 0000000000000000 R15: 0000000000000000 [ 914.121620] </TASK> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211201071745.17746-2-quic_wgong@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ath11k: clear the keys properly via DISABLE_KEYKarthikeyan Kathirvel1-1/+2
[ Upstream commit 436a4e88659842a7cf634d7cc088c8f2cc94ebf5 ] DISABLE_KEY sets the key_len to 0, firmware will not delete the keys if key_len is 0. Changing from security mode to open mode will cause mcast to be still encrypted without vdev restart. Set the proper key_len for DISABLE_KEY cmd to clear the keys in firmware. Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Reported-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Karthikeyan Kathirvel <kathirve@codeaurora.org> [sven@narfation.org: split into separate patches, clean up commit message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211115100441.33771-1-sven@narfation.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-16ath11k: Fix buffer overflow when scanning with extraieSven Eckelmann1-3/+3
commit a658c929ded7ea3aee324c8c2a9635a5e5a38e7f upstream. If cfg80211 is providing extraie's for a scanning process then ath11k will copy that over to the firmware. The extraie.len is a 32 bit value in struct element_info and describes the amount of bytes for the vendor information elements. The WMI_TLV packet is having a special WMI_TAG_ARRAY_BYTE section. This section can have a (payload) length up to 65535 bytes because the WMI_TLV_LEN can store up to 16 bits. The code was missing such a check and could have created a scan request which cannot be parsed correctly by the firmware. But the bigger problem was the allocation of the buffer. It has to align the TLV sections by 4 bytes. But the code was using an u8 to store the newly calculated length of this section (with alignment). And the new calculated length was then used to allocate the skbuff. But the actual code to copy in the data is using the extraie.len and not the calculated "aligned" length. The length of extraie with IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS enabled was 264 bytes during tests with a QCA Milan card. But it only allocated 8 bytes (264 bytes % 256) for it. As consequence, the code to memcpy the extraie into the skb was then just overwriting data after skb->end. Things like shinfo were therefore corrupted. This could usually be seen by a crash in skb_zcopy_clear which tried to call a ubuf_info callback (using a bogus address). Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-02892.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Cc: stable@vger.kernel.org Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211207142913.1734635-1-sven@narfation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18ath11k: fix packet drops due to incorrect 6 GHz freq value in rx statusPradeep Kumar Chitrapu1-3/+7
[ Upstream commit 9d6ae1f5cf733c0e8d7f904c501fd015c4b9f0f4 ] Frequency in rx status is being filled incorrectly in the 6 GHz band as channel number received is invalid in this case which is causing packet drops. So fix that. Fixes: 5dcf42f8b79d ("ath11k: Use freq instead of channel number in rx path") Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210722102054.43419-2-jouni@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ath11k: Avoid race during regd updatesSriram R1-10/+6
[ Upstream commit 1db2b0d0a39102238fcbf9092cefa65a710642e9 ] Whenever ath11k is bootup with a user country already set, cfg80211 notifies this country info to ath11k soon after registration, where the notification is sent to the firmware for fetching the rules of this user country input. Multiple race conditions could be seen in this scenario where a new request is either lost as pointed in [1] or a new regd overwrites the default regd provided by the firmware during bootup. Note that, the default regd is used for intersection purpose and hence it should not be overwritten. The main reason as pointed by [1] is the usage of ATH11K_FLAG_REGISTERED flag which is updated after completion of core registration, whereas the reg notification from cfg80211 and wmi events for the corresponding request can happen much before that. Since the ATH11K_FLAG_REGISTERED is currently used to determine if the event containing reg rules belong to default regd or for user request, there is a possibility of the default regd getting overwritten. Since the default reg rules will be received only once per pdev on firmware load, the above flag based check can be replaced with a check to see if default_regd is already set, so that we can now always update the new_regd. Also if the new_regd is set, this will be always used to update the reg rules for the registered phy. [1] https://patchwork.kernel.org/project/linux-wireless/patch/1829665.1PRlr7bOQj@ripper/ Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01460-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721212029.142388-4-jouni@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ath11k: add handler for scan event WMI_SCAN_EVENT_DEQUEUEDWen Gong1-0/+2
[ Upstream commit 441b3b5911f8ead7f2fe2336587b340a33044d58 ] When wlan interface is up, 11d scan is sent to the firmware, and the firmware needs to spend couple of seconds to complete the 11d scan. If immediately a normal scan from user space arrives to ath11k, then the normal scan request is also sent to the firmware, but the scan started event will be reported to ath11k until the 11d scan complete. When timed out for the scan started in ath11k, ath11k stops the normal scan and the firmware reports WMI_SCAN_EVENT_DEQUEUED to ath11k for the normal scan. ath11k has no handler for the event and then timed out for the scan completed in ath11k_scan_stop(), and ath11k prints the following error message. [ 1491.604750] ath11k_pci 0000:02:00.0: failed to receive scan abort comple: timed out [ 1491.604756] ath11k_pci 0000:02:00.0: failed to stop scan: -110 [ 1491.604758] ath11k_pci 0000:02:00.0: failed to start hw scan: -110 Add a handler for WMI_SCAN_EVENT_DEQUEUED and then complete the scan to get rid of the above error message. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210914164226.38843-1-jouni@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ath11k: Avoid reg rules update during firmware recoverySriram R1-0/+11
[ Upstream commit 69a0fcf8a9f2273040d03e5ee77c9689c09e9d3a ] During firmware recovery, the default reg rules which are received via WMI_REG_CHAN_LIST_CC_EVENT can overwrite the currently configured user regd. See below snap for example, root@OpenWrt:/# iw reg get | grep country country FR: DFS-ETSI country FR: DFS-ETSI country FR: DFS-ETSI country FR: DFS-ETSI root@OpenWrt:/# echo assert > /sys/kernel/debug/ath11k/ipq8074\ hw2.0/simulate_f w_crash <snip> [ 5290.471696] ath11k c000000.wifi1: pdev 1 successfully recovered root@OpenWrt:/# iw reg get | grep country country FR: DFS-ETSI country US: DFS-FCC country US: DFS-FCC country US: DFS-FCC In the above, the user configured country 'FR' is overwritten when the rules of default country 'US' are received and updated during recovery. Hence avoid processing of these rules in general during firmware recovery as they have been already applied during driver registration or after last set user country is configured. This scenario applies for both AP and STA devices basically because cfg80211 is not aware of the recovery and only the driver recovers, but changing or resetting of the reg domain during recovery is not needed so as to continue with the configured regdomain currently in use. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01460-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721212029.142388-3-jouni@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ath11k: Align bss_chan_info structure with firmwareSeevalamuthu Mariappan1-0/+1
[ Upstream commit feab5bb8f1d4621025dceae7eef62d5f92de34ac ] pdev_id in structure 'wmi_pdev_bss_chan_info_event' is wrongly placed at the beginning. This causes invalid values in survey dump. Hence, align the structure with the firmware. Note: The firmware releases follow this order since the feature was implemented. Also, it is not changing across the branches including QCA6390. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ritesh Singh <ritesi@codeaurora.org> Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210720214922.118078-3-jouni@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-24ath10k/ath11k: fix spelling mistake "requed" -> "requeued"Colin Ian King1-2/+2
There are multiple occurrances of the misspelling of requeued in the drivers with symbol names and debug text. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210423134133.339751-1-colin.king@canonical.com
2021-03-09ath11k: Add support for STA to handle beacon missLavanya Suresh1-8/+3
When AP goes down without any indication to STA, firmware detects missing beacon, and sends wmi roam event with reason BEACON_MISS to the host. Added support for STA mode to trigger disassociation from AP, on receiving this event from firmware. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01717-QCAHKSWPL_SILICONZ-1 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Lavanya Suresh <lavaks@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1614340859-28867-1-git-send-email-lavaks@codeaurora.org
2021-02-24ath11k: fix thermal temperature readPradeep Kumar Chitrapu1-32/+21
Fix dangling pointer in thermal temperature event which causes incorrect temperature read. Tested-on: IPQ8074 AHB WLAN.HK.2.4.0.1-00041-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210218182708.8844-1-pradeepc@codeaurora.org
2021-02-11ath11k: add support to configure spatial reuse parameter setRajkumar Manoharan1-0/+227
The SPR parameter set comprises OBSS PD threshold for SRG and non SRG and Bitmap of BSS color and partial BSSID. This adds support to configure fields of SPR element to firmware. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01164-QCAHKSWPL_SILICONZ-1 Tested-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612843714-29174-1-git-send-email-rmanohar@codeaurora.org
2021-02-04ath11k: remove h from printk format specifierTom Rix1-2/+2
This change fixes the checkpatch warning described in this commit commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]") Standard integer promotion is already done and %hx and %hhx is useless so do not encourage the use of %hh[xudi] or %h[xudi]. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210128144928.2557605-1-trix@redhat.com
2020-12-17ath11k: add missing null check on allocated skbColin Ian King1-0/+3
Currently the null check on a newly allocated skb is missing and this can lead to a null pointer dereference is the allocation fails. Fix this by adding a null check and returning -ENOMEM. Addresses-Coverity: ("Dereference null return") Fixes: 43ed15e1ee01 ("ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDID") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214232417.84556-1-colin.king@canonical.com
2020-12-12ath11k: implement WoW enable and wakeup commandsCarl Huang1-0/+99
Implement wow enable ane wow wakeup commands which are needed for suspend. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-9-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: Fix incorrect tlvs in scan start commandPradeep Kumar Chitrapu1-31/+0
Currently 6G specific tlvs have duplicate entries which is causing scan failures. Fix this by removing the duplicate entries of the same tlv. This also fixes out-of-bound memory writes caused due to adding tlvs when num_hint_bssid and num_hint_s_ssid are ZEROs. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01386-QCAHKSWPL_SILICONZ-1 Fixes: 74601ecfef6e ("ath11k: Add support for 6g scan hint") Reported-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-7-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDIDCarl Huang1-4/+34
It's recommended to use wmi command WMI_PDEV_SET_HW_MODE_CMDID to put hardware to dbs mode instead of wmi_init command. This fixes a few strange stability issues. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-3-git-send-email-kvalo@codeaurora.org
2020-12-07ath11k: Ignore resetting peer auth flag in peer assoc cmdSeevalamuthu Mariappan1-3/+7
Incase of hardware encryption, WMI_PEER_AUTH flag will be set by firmware during install key. Since install key wont be done for software encryption mode, firmware will not set this flag. Due to this, seeing traffic failure in software encryption. Hence, avoid resetting peer auth flag if hardware encryption disabled. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01421-QCAHKSWPL_SILICONZ-1 Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606369414-25211-1-git-send-email-seevalam@codeaurora.org
2020-11-24ath11k: remove "ath11k_mac_get_ar_vdev_stop_status" referencesRitesh Singh1-1/+1
Unused structure ath11k_vdev_stop_status is removed. 'ath11k_mac_get_ar_vdev_stop_status' api has been replaced with 'ath11k_mac_get_ar_by_vdev_id' inside vdev_stopped_event. Signed-off-by: Ritesh Singh <ritesi@codeaurora.org> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605514143-17652-4-git-send-email-mkenna@codeaurora.org
2020-11-24ath11k: peer delete synchronization with firmwareRitesh Singh1-3/+14
Peer creation in firmware fails, if last peer deletion is still in progress. Hence, add wait for the event after deleting every peer from host driver to synchronize with firmware. Signed-off-by: Ritesh Singh <ritesi@codeaurora.org> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605514143-17652-3-git-send-email-mkenna@codeaurora.org
2020-11-24ath11k: vdev delete synchronization with firmwareRitesh Singh1-1/+61
When the interface is added immediately after removing the interface, vdev deletion in firmware might not have been completed. Hence, add vdev_delete_resp_event and wait_event_timeout to synchronize with firmware. Signed-off-by: Ritesh Singh <ritesi@codeaurora.org> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605514143-17652-2-git-send-email-mkenna@codeaurora.org
2020-11-07ath11k: fix ZERO address in probe requestCarl Huang1-0/+5
Host needs to pass at least on bssid with all 0xff to firmware in WMI_START_SCAN_CMDID, otherwise the bssid and receiver address in probe requeste are all ZEROs. This also fixed some hidden AP connection issue because some AP doesn't respond to probe request which receiver address are all ZEROs. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201012101733.24137-1-cjhuang@codeaurora.org
2020-11-07ath11k: Fix single phy hw modeKarthikeyan Periyasamy1-3/+0
driver not able to bootup in the single radio configured board. single phy hw mode is converted to invalid hw mode and sent to FW through wmi init cmd. In that case driver is not receiving wmi ready event which leads to driver bootup fail. single phy hw mode is a valid for single radio configured board. so removed the conversion logic. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1604511331-22477-1-git-send-email-periyasa@codeaurora.org
2020-11-06ath11k: FILS discovery and unsolicited broadcast probe response supportAloka Dixit1-0/+203
This patch adds driver support for FILS discovery and unsolicited broadcast probe response transmission features which are used for in-band discovery in 6GHz band. Currently this support is enabled only in 6GHz by setting hardware flags. Changes include WMI commands to enable transmission, set packet interval, set template, and handle events. Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201007204036.19780-1-alokad@codeaurora.org
2020-10-28ath11k: remove repeated words in comments and warningsKalle Valo1-1/+1
Found by latest checkpatch. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1603803705-22447-1-git-send-email-kvalo@codeaurora.org
2020-09-29ath11k: Move non-fatal warn logs to dbg levelGovind Singh1-1/+1
During driver load below warn logs are printed in the console. Since driver may not implement all wmi events sent by fw and all of them are non-fatal, move this log to debug level to remove un-necessary warn message on console. [876.898735] ath11k_pci 0000:06:00.0: Unknown eventid: 0x16005 [879.283250] ath11k_pci 0000:06:00.0: Unknown eventid: 0x1d00a No functional changes. Compile tested only. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1600948691-6901-1-git-send-email-govinds@codeaurora.org
2020-09-22ath11k: wmi: remove redundant configuration values from initKalle Valo1-49/+0
In commit 2d4bcbed5b7d ("ath11k: initialize wmi config based on hw_params") the wmi config initialisation was moved to hw_ops->wmi_init_config() but the old initialisation values were accidentally left to ath11k_wmi_cmd_init(). This is very confusing, so remove the redundant values. And this was actually so confusing that in commit aa2092a9bab3 ("ath11k: add raw mode and software crypto support") I actually it caused a bug: when ATH11K_FLAG_RAW_MODE was enabled rx_decap_mode was assigned back to TARGET_DECAP_MODE_NATIVE_WIFI in ath11k_init_wmi_config_ipq8074(). Fix this at the same time. Compile tested only. Fixes: 2d4bcbed5b7d ("ath11k: initialize wmi config based on hw_params") Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1600356507-29237-1-git-send-email-kvalo@codeaurora.org
2020-09-22ath11k: debugfs: use ath11k_debugfs_ prefixKalle Valo1-1/+1
As these functions are now defined in debugfs.c change the prefix to use ath11k_debugfs_ as well. No functional changes. Compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1600264523-12939-2-git-send-email-kvalo@codeaurora.org
2020-09-11Merge tag 'wireless-drivers-next-2020-09-11' of ↵David S. Miller1-31/+76
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.10 First set of patches for v5.10. Most noteworthy here is ath11k getting initial support for QCA6390 and IPQ6018 devices. But most of the patches are cleanup: W=1 warning fixes, fallthrough keywords, DMA API changes and tasklet API changes. Major changes: ath10k * support SDIO firmware codedumps * support station specific TID configurations ath11k * add support for IPQ6018 * add support for QCA6390 PCI devices ath9k * add support for NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 to improve PTK0 rekeying wcn36xx * add support for TX ack ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11ath11k: add raw mode and software crypto supportVenkateswara Naralasetty1-0/+4
Adding raw mode tx/rx support. Also, adding support for software crypto which depends on raw mode. To enable raw mode tx/rx: insmod ath11k.ko frame_mode=0 To enable software crypto: insmod ath11k.ko crypto_mode=1 These modes could be helpful in debugging crypto related issues. Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746c6a52d9-18302a2c-0d6d-4057-aa4b-95960c809646-000000@us-west-2.amazonses.com
2020-08-27mac80211: rename csa counters to countdown countersJohn Crispin1-2/+2
We want to reuse the functions and structs for other counters such as BSS color change. Rename them to more generic names. Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20200811080107.3615705-2-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-18ath11k: refine the phy_id check in ath11k_reg_chan_list_eventCarl Huang1-1/+6
For QCA6390, it processes the reg chan list event only for phy0, and it goes to fallback if the phy_id is not valid. For a valid phy_id but not 0, just discard the event. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597555891-26112-5-git-send-email-kvalo@codeaurora.org
2020-08-18ath11k: wmi: put hardware to DBS modeCarl Huang1-5/+5
For QCA6390, host puts hardware to Dual Band Simultaneous (DBS) mode by default so both 2G and 5G bands can be used. Otherwise only the 5G band can be used. QCA6390 doesn't provide band_to_mac configuration and firmware will do the band_to_mac map. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597576599-8857-12-git-send-email-kvalo@codeaurora.org
2020-08-18ath11k: initialize wmi config based on hw_paramsCarl Huang1-1/+3
QCA6390 has very different wmi config parameters compared to IPQ8074, so use different function to initialize wmi init config parameters. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597576599-8857-11-git-send-email-kvalo@codeaurora.org
2020-08-18ath11k: force single pdev only for QCA6390Carl Huang1-26/+60
For QCA6390, only one pdev is created and only one HW is registered to mac80211. This one pdev manages both 2G radio and 5G radio. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597576599-8857-10-git-send-email-kvalo@codeaurora.org
2020-06-23ath11k: define max_radios in hw_paramsAnilkumar Kolli1-2/+2
IPQ6018 needs different value for max_radios so make it configurable via hw_params. No functional changes. Compile tested only. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1592316055-24958-4-git-send-email-kvalo@codeaurora.org
2020-06-15ath11k: fix wmi peer flags in peer assoc commandVenkateswara Naralasetty1-3/+3
Currently need ptk/gtk wmi peer flags in wmi peer assoc cmd are set based on the rsnie and wpaie of the bss from the bss list. Since this bss list is not updated with current BSSID for AP mode, we may not find bss from the bss list. Which results in ptk/gtk peer flags are not set in the wmi peer assoc cmd. Due to this EAPOL frames are going in data rates instead of management rates. Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591771841-25503-1-git-send-email-vnaralas@codeaurora.org
2020-06-15ath11k: add support for spectral scanKarthikeyan Periyasamy1-0/+198
spectral scan control interface is exposed through debugfs eentry. Relayfs is used to collect the spectral data. These interfaces are similar to ath10k spectral. spectral debugfs interfaces are below, echo background > /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan_ctl echo trigger > /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan_ctl iw dev wlan0 scan echo disable > /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan_ctl cat /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan0 > fft_samples.dump Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591688014-26441-2-git-send-email-periyasa@codeaurora.org
2020-06-15ath11k: Add direct buffer ring supportKarthikeyan Periyasamy1-2/+224
Add direct buffer ring (dbring) with helper API, which is used by the spectral scan. Initialise the direct buffer ring based on the dma ring capability, which get announced in the wmi service ready extended event. This ring is slightly changed from data path rings. Compare to data path ring this ring shares the hp and tp address to firmware though WMI commands. Also the replenish buffer size is derived from firmware announcement. driver receive indication through WMI event WMI_PDEV_DMA_RING_BUF_RELEASE_EVENTID. Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591688014-26441-1-git-send-email-periyasa@codeaurora.org
2020-06-11ath11k: Add support for 6g scan hintPradeep Kumar Chitrapu1-0/+72
Add support for 6Ghz short ssid and bssid hint mechanism as part of scan command. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603001724.12161-9-pradeepc@codeaurora.org
2020-06-11ath11k: Send multiple scan_chan_list messages if requiredPradeep Kumar Chitrapu1-71/+90
With addition of 6Ghz channels, it is possible that wmi buffer size can exceed the maximum wmi buffer size. So iterate over the channel list, and send multiple messages till channel list is empty. Also mark PSC channel flag for 6GHz channels accordingly. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603001724.12161-8-pradeepc@codeaurora.org
2020-06-11ath11k: Add 6G scan dwell time parameter in scan request commandPradeep Kumar Chitrapu1-0/+4
Add 6G scan active and passive dwell time parameter to scan request. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603001724.12161-7-pradeepc@codeaurora.org
2020-06-11ath11k: extend peer_assoc_cmd for 6GHz bandPradeep Kumar Chitrapu1-0/+2
This adds support required for configuring min_data_rate of 6GHz oper IE and peer_he_caps_6ghz in peer assoc command. The Minimum Rate field indicates the minimum rate, in units of 1 Mb/s, that the non-AP STA is allowed to use for sending PPDUs as defined in IEEE P802.11ax™/D6.0. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603001724.12161-5-pradeepc@codeaurora.org
2020-06-11ath11k: Use freq instead of channel number in rx pathPradeep Kumar Chitrapu1-1/+4
As 6GHz cahnnel numbers overlap with those of 5GHz and 2GHz bands, it is necessary to use frequency when determining the band info in rx path. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603001724.12161-4-pradeepc@codeaurora.org
2020-06-11ath11k: add support for 6GHz radio in driverPradeep Kumar Chitrapu1-2/+14
This patch adds 6GHz band support and mac80211 registration for the 6G phy radio. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603001724.12161-3-pradeepc@codeaurora.org
2020-04-14ath11k: Fix TWT radio countAloka Dixit1-1/+1
TWT feature fails on radio2 because physical device count is hardcoded to 2. Set value dynamically. Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200408174117.22957-1-alokad@codeaurora.org
2020-04-06ath11k: Avoid mgmt tx count underflowSriram R1-2/+3
The mgmt tx count reference is incremented/decremented on every mgmt tx and on tx completion event from firmware. In case of an unexpected mgmt tx completion event from firmware, the counter would underflow. Avoid this by decrementing only when the tx count is greater than 0. Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585567028-9242-1-git-send-email-srirrama@codeaurora.org
2020-04-06ath11k: fix error message to correctly report the command that failedColin Ian King1-1/+1
Currently the error message refers to the command WMI_TWT_DIeABLE_CMDID which looks like a cut-n-paste mangled typo. Fix the message to match the command WMI_BSS_COLOR_CHANGE_ENABLE_CMDID that failed. Fixes: 5a032c8d1953 ("ath11k: add WMI calls required for handling BSS color") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200327192639.363354-1-colin.king@canonical.com
2020-04-06ath11k: add pktlog checksum in trace events to support pktlogMaharaja Kennadyrajan1-8/+13
Pktlog data are different among the chipset & chipset versions. As part of enhancing the user space script to decode the pktlog trace events generated, it is desirable to know which chipset or which chipset version has provided the events and thereby decode the pktlogs appropriately. Pktlog checksum helps to determine the chipset variant which is given by the firmware in the struct wmi_ready_event. Pktlog checksums are computed during the firmware build. So, adding that pktlog checksum in the pklog trace events. Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585234155-30574-1-git-send-email-mkenna@codeaurora.org
2020-04-06ath11k: Add sta debugfs support to configure ADDBA and DELBAMaharaja Kennadyrajan1-0/+140
Add support to test aggregation procedures (addba/addba_resp/delba) manually by adding the required callbacks in sta debugfs files. To enable automatic aggregation in target, echo 0 > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/ stations/XX:XX:XX:XX:XX:XX/aggr_mode For manual mode, echo 1 > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/ stations/XX:XX:XX:XX:XX:XX/aggr_mode To send addba response, echo 0 25 > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/ stations/XX:XX:XX:XX:XX:XX/addba_resp To send addba, echo 1 32 > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/ stations/XX:XX:XX:XX:XX:XX/addba To send delba, echo 0 1 37 > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/ stations/XX:XX:XX:XX:XX:XX/delba Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585213026-28406-1-git-send-email-mkenna@codeaurora.org
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-03 22:22:56 +0300