summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath11k/mac.c
AgeCommit message (Collapse)AuthorFilesLines
2022-08-17wifi: mac80211: move some future per-link data to bss_confJohannes Berg1-6/+6
[ Upstream commit d0a9123ef548def5c8880e83e5df948eb5b55c62 ] To add MLD, reuse the bss_conf structure later for per-link information, so move some things into it that are per link. Most transformations were done with the following spatch: @@ expression sdata; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -sdata->vif.var +sdata->vif.bss_conf.var @@ struct ieee80211_vif *vif; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -vif->var +vif->bss_conf.var Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17ath11k: Fix warning on variable 'sar' dereference before checkBaochen Qiang1-7/+6
[ Upstream commit 77bbbd5e0ed3b5998a353b0948584faa4f565f0e ] We are seeing below warning: warn: variable dereferenced before check 'sar' Fix it by moving ahead pointer check on 'sar'. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: 652f69ed9c1b ("ath11k: Add support for SAR") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220517004844.2412660-1-quic_bqiang@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-10ath11k: remove redundant assignment to variables vht_mcs and he_mcsColin Ian King1-2/+2
The variables vht_mcs and he_mcs are being initialized in the start of for-loops however they are re-assigned new values in the loop and not used outside the loop. The initializations are redundant and can be removed. Cleans up clang scan warnings: warning: Although the value stored to 'vht_mcs' is used in the enclosing expression, the value is never actually read from 'vht_mcs' [deadcode.DeadStores] warning: Although the value stored to 'he_mcs' is used in the enclosing expression, the value is never actually read from 'he_mcs' [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220507184155.26939-1-colin.i.king@gmail.com
2022-05-10ath11k: Don't check arvif->is_started before sending management framesBaochen Qiang1-2/+3
Commit 66307ca04057 ("ath11k: fix mgmt_tx_wmi cmd sent to FW for deleted vdev") wants both of below two conditions are true before sending management frames: 1: ar->allocated_vdev_map & (1LL << arvif->vdev_id) 2: arvif->is_started Actually the second one is not necessary because with the first one we can make sure the vdev is present. Also use ar->conf_mutex to synchronize vdev delete and mgmt. TX. This issue is found in case of Passpoint scenario where ath11k needs to send action frames before vdev is started. Fix it by removing the second condition. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Fixes: 66307ca04057 ("ath11k: fix mgmt_tx_wmi cmd sent to FW for deleted vdev") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220506013614.1580274-3-quic_bqiang@quicinc.com
2022-05-10ath11k: Implement remain-on-channel supportBaochen Qiang1-0/+115
Add remain on channel support, it is needed in several scenarios such as Passpoint etc. Currently this is supported by QCA6390, WCN6855, IPQ8074, IPQ6018 and QCN9074. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220506013614.1580274-2-quic_bqiang@quicinc.com
2022-05-10ath11k: Handle keepalive during WoWLAN suspend and resumeBaochen Qiang1-0/+31
With WoWLAN enabled and after sleeping for a rather long time, we are seeing that with some APs, it is not able to wake up the STA though the correct wake up pattern has been configured. This is because the host doesn't send keepalive command to firmware, thus firmware will not send any packet to the AP and after a specific time the AP kicks out the STA. Fix this issue by enabling keepalive before going to suspend and disabling it after resume back. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220506012540.1579604-1-quic_bqiang@quicinc.com
2022-05-09ath11k: reset 11d state in process of recoveryWen Gong1-0/+5
When doing simulate_fw_crash operation periodically with a short interval time such as 10 seconds, it is easy happened WMI command timed out for WMI_SCAN_CHAN_LIST_CMDID in ath11k_reg_update_chan_list(). log: [42287.610053] ath11k_pci 0000:01:00.0: wmi command 12291 timeout [42287.610064] ath11k_pci 0000:01:00.0: failed to send WMI_SCAN_CHAN_LIST cmd [42287.610073] ath11k_pci 0000:01:00.0: failed to perform regd update : -11 Note that this issue does not occur with a longer interval such as 20 seconds. The reason the issue occurs with a shorter interval is the following steps: 1) Upon initial boot, or after device recovery, the initial hw scan plus the 11d scan will run, and when 6 GHz support is present, these scans can take up to 12 seconds to complete, so ath11k_reg_update_chan_list() is still waiting the completion of ar->completed_11d_scan. 2) If a simulate_fw_crash operation is received during this time, those scans do not complete, and ath11k_core_pre_reconfigure_recovery() complete the ar->completed_11d_scan, then ath11k_reg_update_chan_list() wakeup and start to send WMI_SCAN_CHAN_LIST_CMDID, but firmware is crashed at this moment, so wmi timed out occur. To address this issue, reset the 11d state during device recovery so that WMI_SCAN_CHAN_LIST_CMDID does not timed out for short interval time such as 10 seconds. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: 1f682dc9fb37 ("ath11k: reduce the wait time of 11d scan and hw scan while add interface") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220505034636.29582-1-quic_wgong@quicinc.com
2022-05-06ath11k: mac: fix too long lineKalle Valo1-4/+8
checkpatch warns: drivers/net/wireless/ath/ath11k/mac.c:7760: line length of 91 exceeds 90 columns This was introduced by commit 046d2e7c50e3 ("mac80211: prepare sta handling for MLO support"). Compile tested only. Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220503060415.24499-1-kvalo@kernel.org
2022-05-04Merge tag 'wireless-next-2022-05-03' of ↵Jakub Kicinski1-151/+478
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v5.19 First set of patches for v5.19 and this is a big one. We have two new drivers, a change in mac80211 STA API affecting most drivers and ath11k getting support for WCN6750. And as usual lots of fixes and cleanups all over. Major changes: new drivers - wfx: silicon labs devices - plfxlc: pureLiFi X, XL, XC devices mac80211 - host based BSS color collision detection - prepare sta handling for IEEE 802.11be Multi-Link Operation (MLO) support rtw88 - support TP-Link T2E devices rtw89 - support firmware crash simulation - preparation for 8852ce hardware support ath11k - Wake-on-WLAN support for QCA6390 and WCN6855 - device recovery (firmware restart) support for QCA6390 and WCN6855 - support setting Specific Absorption Rate (SAR) for WCN6855 - read country code from SMBIOS for WCN6855/QCA6390 - support for WCN6750 wcn36xx - support for transmit rate reporting to user space * tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (228 commits) rtw89: 8852c: rfk: add DPK rtw89: 8852c: rfk: add IQK rtw89: 8852c: rfk: add RX DCK rtw89: 8852c: rfk: add RCK rtw89: 8852c: rfk: add TSSI rtw89: 8852c: rfk: add LCK rtw89: 8852c: rfk: add DACK rtw89: 8852c: rfk: add RFK tables plfxlc: fix le16_to_cpu warning for beacon_interval rtw88: remove a copy of the NAPI_POLL_WEIGHT define carl9170: tx: fix an incorrect use of list iterator wil6210: use NAPI_POLL_WEIGHT for napi budget ath10k: remove a copy of the NAPI_POLL_WEIGHT define ath11k: Add support for WCN6750 device ath11k: Datapath changes to support WCN6750 ath11k: HAL changes to support WCN6750 ath11k: Add QMI changes for WCN6750 ath11k: Fetch device information via QMI for WCN6750 ath11k: Add register access logic for WCN6750 ath11k: Add HW params for WCN6750 ... ==================== Link: https://lore.kernel.org/r/20220503153622.C1671C385A4@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo1-1/+81
ath.git patches for v5.19. Major changes: ath11k * support setting Specific Absorption Rate (SAR) for WCN6855 * read country code from SMBIOS for WCN6855/QCA6390 * support for WCN6750
2022-05-02ath11k: change management tx queue to avoid connection timed outWen Gong1-1/+1
In the phase of wlan load, it has hw scan and 11d scan which sent to firmware by ath11k, then hw scan and 11d scan will use about 14 seconds, and meanwhile ath11k_reg_update_chan_list() is running in workqueue of ath11k_base, and wait for 11d scan/hw scan finished. When the hw scan finished, mac80211 will start to connect and send management packet, at this moment, ath11k_reg_update_chan_list() is still waiting for 11d scan finished, so wmi_mgmt_tx_work of ath11k will not run and thus the tx management packet also not send out and lead authentication timed out. log: INFO kernel: [ 187.885322] wlan0: authenticate with 72:6c:57:43:9f:90 INFO kernel: [ 187.937266] wlan0: send auth to 72:6c:57:43:9f:90 (try 1/3) INFO kernel: [ 188.626944] wlan0: send auth to 72:6c:57:43:9f:90 (try 2/3) INFO kernel: [ 189.650999] wlan0: send auth to 72:6c:57:43:9f:90 (try 3/3) INFO kernel: [ 190.651917] wlan0: authentication with 72:6c:57:43:9f:90 timed out Change wmi_mgmt_tx_work to another queue workqueue_aux of ath11k_base, then connection success. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220428023320.4007-1-quic_wgong@quicinc.com
2022-04-27ath11k: read country code from SMBIOS for WCN6855/QCA6390Wen Gong1-0/+11
This read the country code from SMBIOS and send the country code to firmware, firmware will indicate the regulatory domain info of the country code and then ath11k will use the info. dmesg: [ 1242.637173] ath11k_pci 0000:02:00.0: chip_id 0x2 chip_family 0xb board_id 0xff soc_id 0x400c0200 [ 1242.637176] ath11k_pci 0000:02:00.0: fw_version 0x110b09e5 fw_build_timestamp 2021-06-22 09:32 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-02533-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 [ 1242.637253] ath11k_pci 0000:02:00.0: worldwide regdomain setting from SMBIOS [ 1242.637259] ath11k_pci 0000:02:00.0: bdf variant name not found. [ 1242.637261] ath11k_pci 0000:02:00.0: SMBIOS bdf variant name not set. [ 1242.637263] ath11k_pci 0000:02:00.0: DT bdf variant name not set. [ 1242.927543] ath11k_pci 0000:02:00.0: set current country pdev id 0 alpha2 00 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220421023501.32167-1-quic_wgong@quicinc.com
2022-04-23ath11k: Fix build warning without CONFIG_IPV6YueHaibing1-0/+2
drivers/net/wireless/ath/ath11k/mac.c:8175:13: error: ‘ath11k_mac_op_ipv6_changed’ defined but not used [-Werror=unused-function] static void ath11k_mac_op_ipv6_changed(struct ieee80211_hw *hw, ^~~~~~~~~~~~~~~~~~~~~~~~~~ Wrap it with #ifdef block to fix this. Fixes: c3c36bfe998b ("ath11k: support ARP and NS offload") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220411020843.10284-1-yuehaibing@huawei.com
2022-04-23ath11k: Add support for SARBaochen Qiang1-0/+67
Add ath11k_mac_op_set_bios_sar_specs() to ath11k_ops, this function is called when user space application calls NL80211_CMD_SET_SAR_SPECS. ath11k also registers SAR type and frequency ranges to wiphy so user space can query SAR capabilities. This feature is currently enabled for WCN6855. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-02431-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220401120948.1312956-3-quic_bqiang@quicinc.com
2022-04-11mac80211: prepare sta handling for MLO supportSriram R1-76/+78
Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-11mac80211: introduce BSS color collision detectionLorenzo Bianconi1-1/+4
Add ieee80211_rx_check_bss_color_collision routine in order to introduce BSS color collision detection in mac80211 if it is not supported in HW/FW (e.g. for mt7915 chipset). Add IEEE80211_HW_DETECTS_COLOR_COLLISION flag to let the driver notify BSS color collision detection is supported in HW/FW. Set this for ath11k which apparently didn't need this code. Tested-by: Peter Chiu <Chui-Hao.Chiu@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/a05eeeb1841a84560dc5aaec77894fcb69a54f27.1648204871.git.lorenzo@kernel.org [clarify commit message a bit, move flag to mac80211] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-04Revert "ath11k: mesh: add support for 256 bitmap in blockack frames in 11ax"Anilkumar Kolli1-8/+14
This reverts commit 743b9065fe6348a5f8f5ce04869ce2d701e5e1bc. The original commit breaks the 256 bitmap in blockack frames in AP mode. After reverting the commit the feature works again in both AP and mesh modes Tested-on: IPQ8074 hw2.0 PCI WLAN.HK.2.6.0.1-00786-QCAHKSWPL_SILICONZ-1 Fixes: 743b9065fe63 ("ath11k: mesh: add support for 256 bitmap in blockack frames in 11ax") Signed-off-by: Anilkumar Kolli <quic_akolli@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/1648701477-16367-1-git-send-email-quic_akolli@quicinc.com
2022-03-30ath11k: reduce the wait time of 11d scan and hw scan while add interfaceWen Gong1-42/+29
Currently ath11k will wait 11d scan complete while add interface in ath11k_mac_op_add_interface(), when system resume without enable wowlan, ath11k_mac_op_add_interface() is called for each resume, thus it increase the resume time of system. And ath11k_mac_op_hw_scan() after ath11k_mac_op_add_interface() also needs some time cost because the previous 11d scan need more than 5 seconds when 6 GHz is enabled, then the scan started event will indicated to ath11k after the 11d scan completed. While 11d scan/hw scan is running in firmware, if ath11k update channel list to firmware by WMI_SCAN_CHAN_LIST_CMDID, then firmware will cancel the current scan which is running, it lead the scan failed. The patch commit 9dcf6808b253 ("ath11k: add 11d scan offload support") used finish_11d_scan/finish_11d_ch_list/pending_11d to synchronize the 11d scan/hw scan/channel list between ath11k/firmware/mac80211 and to avoid the scan fail. Add wait operation before ath11k update channel list, function ath11k_reg_update_chan_list() will wait until the current 11d scan/hw scan completed. And remove the wait operation of start 11d scan and waiting channel list complete in hw scan. After these changes, resume time cost reduce about 5 seconds and also hw scan time cost reduced obviously, and scan failed not seen. The 11d scan is sent to firmware only one time for each interface added in mac.c, and it is moved after the 1st hw scan because 11d scan will cost some time and thus leads the AP scan result update to UI delay. Currently priority of ath11k's hw scan is WMI_SCAN_PRIORITY_LOW, and priority of 11d scan in firmware is WMI_SCAN_PRIORITY_MEDIUM, then the 11d scan which sent after hw scan will cancel the hw scan in firmware, so change the priority to WMI_SCAN_PRIORITY_MEDIUM for the hw scan which is in front of the 11d scan, thus it will not happen scan cancel in firmware. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: 9dcf6808b253 ("ath11k: add 11d scan offload support") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220328035832.14122-1-quic_wgong@quicinc.com
2022-03-28ath11k: store and send country code to firmware after recoveryWen Gong1-0/+8
Currently ath11k does not send the country code to firmware after device recovery, as a result the regdomain info is reported from firmware by default. Regdomain info is important, so ath11k also need to restore it to the value which was used before recovery. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220324011856.11014-1-quic_wgong@quicinc.com
2022-03-25ath11k: Add peer rhash table supportKarthikeyan Periyasamy1-1/+15
When more clients (128) are connected, the UL data traffic KPI measurement is low compared to single client. This issue is due to more CPU cycles spent on the peer lookup operation with more clients. So reduce the peer lookup operation by modifying the linear based lookup operation into the rhash based lookup operation. This improve the peak throughput measurement. Since this is a software algorithm change, it is applicable for all the platforms. TCP UL 128 Clients test case Observation (64bit system): Previous: ~550 Mbps Now : ~860 Mbps Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01067-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1644036628-5334-1-git-send-email-quic_periyasa@quicinc.com
2022-03-23ath11k: add synchronization operation between reconfigure of mac80211 and ↵Wen Gong1-0/+22
ath11k_base ieee80211_reconfig() of mac80211 is the main function for recovery of each ieee80211_hw and ath11k, and ath11k_core_reconfigure_on_crash() is the main function for recovery of ath11k_base, it has more than one ieee80211_hw and ath11k for each ath11k_base, so it need to add synchronization between them, otherwise it has many issue. For example, when ath11k_core_reconfigure_on_crash() is not complete, mac80211 send a hw scan request to ath11k, it leads firmware crash, because firmware has not been initialized at that moment, firmware is only finished downloaded and loaded, it can not receive scan command. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220228064606.8981-3-quic_wgong@quicinc.com
2022-03-23ath11k: add support for device recovery for QCA6390/WCN6855Wen Gong1-0/+18
Currently ath11k has device recovery logic, it is introduced by this patch "ath11k: Add support for subsystem recovery" which is upstream by https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=ath11k-bringup&id=3a7b4838b6f6f234239f263ef3dc02e612a083ad. The patch is for AHB devices such as IPQ8074, it has remote proc module which is used to download the firmware and boots the processor which firmware is running on. If firmware crashed, remote proc module will detect it and download and boot firmware again. Below command will trigger a firmware crash, and then user can test feature of device recovery. Test command: echo assert > /sys/kernel/debug/ath11k/qca6390\ hw2.0/simulate_fw_crash echo assert > /sys/kernel/debug/ath11k/wcn6855\ hw2.0/simulate_fw_crash Unfortunately, QCA6390 is PCIe bus, it does not have the remote proc module, it use mhi module to communicate between firmware and ath11k. So ath11k does not support device recovery for QCA6390 currently. This patch is to add the extra logic which is different for QCA6390. When firmware crashed, MHI_CB_EE_RDDM event will be indicate by firmware and then ath11k_mhi_op_status_cb which is the callback of mhi_controller will receive the MHI_CB_EE_RDDM event, then ath11k will start to do recovery process, ath11k_core_reset() calls ath11k_hif_power_down()/ath11k_hif_power_up(), then the mhi/ath11k will start to download and boot firmware. There are some logic to avoid deadloop recovery and two simultaneous recovery operations. And because it has muti-radios for the soc, so it add some logic in ath11k_mac_op_reconfig_complete() to make sure all radios has reconfig complete and then complete the device recovery. Also it add workqueue_aux, because ab->workqueue is used when receive ATH11K_QMI_EVENT_FW_READY in recovery process(queue_work(ab->workqueue, &ab->restart_work)), and ath11k_core_reset will wait for max ATH11K_RESET_TIMEOUT_HZ for the previous restart_work finished, if ath11k_core_reset also queued in ab->workqueue, then it will delay restart_work of previous recovery and lead previous recovery fail. ath11k recovery success for QCA6390/WCN6855 after apply this patch. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220228064606.8981-2-quic_wgong@quicinc.com
2022-03-23ath11k: acquire ab->base_lock in unassign when finding the peer by addrNiels Dossche1-3/+8
ath11k_peer_find_by_addr states via lockdep that ab->base_lock must be held when calling that function in order to protect the list. All callers except ath11k_mac_op_unassign_vif_chanctx have that lock acquired when calling ath11k_peer_find_by_addr. That lock is also not transitively held by a path towards ath11k_mac_op_unassign_vif_chanctx. The solution is to acquire the lock when calling ath11k_peer_find_by_addr inside ath11k_mac_op_unassign_vif_chanctx. I am currently working on a static analyser to detect missing locks and this was a reported case. I manually verified the report by looking at the code, but I do not have real hardware so this is compile tested only. Fixes: 701e48a43e15 ("ath11k: add packet log support for QCA6390") Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220314215253.92658-1-dossche.niels@gmail.com
2022-03-21ath11k: Refactor the peer deleteKarthikeyan Periyasamy1-13/+3
Introduce new helper function for peer delete to reuse this logic in all peer cleanup procedures. Found this in code review. Also this change is applicable for all the platform. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01067-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1646024079-26391-1-git-send-email-quic_periyasa@quicinc.com
2022-03-18ath11k: support GTK rekey offloadCarl Huang1-0/+37
Host sets GTK related info to firmware before WoW is enabled, and gets rekey replay_count and then disables GTK rekey when WoW quits. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1644308006-22784-7-git-send-email-quic_cjhuang@quicinc.com
2022-03-18ath11k: support ARP and NS offloadCarl Huang1-0/+118
Support ARP and NS offload in WoW state. Tested this way: put machine A with QCA6390 to WoW state, ping/ping6 machine A from another machine B, check sniffer to see any ARP response and Neighbour advertisement from machine A. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1644308006-22784-6-git-send-email-quic_cjhuang@quicinc.com
2022-03-18ath11k: Add WoW net-detect functionalityCarl Huang1-0/+12
Implement net-detect feature by setting flag WIPHY_WOWLAN_NET_DETECT if firmware supports this feature. Driver sets the related PNO configuration to firmware before entering WoW and firmware then scans periodically and wakes up host if a specific SSID is found. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1644308006-22784-3-git-send-email-quic_cjhuang@quicinc.com
2022-03-18ath11k: Add basic WoW functionalitiesCarl Huang1-14/+45
Implement basic WoW functionalities such as magic-packet, disconnect and pattern. The logic is very similar to ath10k. When WoW is configured, ath11k_core_suspend and ath11k_core_resume are skipped as WoW configuration and hif suspend/resume are done in ath11k_wow_op_suspend() and ath11k_wow_op_resume(). Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1644308006-22784-2-git-send-email-quic_cjhuang@quicinc.com
2022-02-25Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo1-17/+45
ath.git patches for v5.18. Major changes: ath11k * debugfs interface to configure firmware debug log level * debugfs interface to test Target Wake Time (TWT) * provide 802.11ax High Efficiency (HE) data via radiotap ath9k * use hw_random API instead of directly dumping into random.c wcn36xx * fix wcn3660 to work on 5 GHz band
2022-02-21ath11k: Fix frames flush failure caused by deadlockBaochen Qiang1-1/+1
We are seeing below warnings: kernel: [25393.301506] ath11k_pci 0000:01:00.0: failed to flush mgmt transmit queue 0 kernel: [25398.421509] ath11k_pci 0000:01:00.0: failed to flush mgmt transmit queue 0 kernel: [25398.421831] ath11k_pci 0000:01:00.0: dropping mgmt frame for vdev 0, is_started 0 this means ath11k fails to flush mgmt. frames because wmi_mgmt_tx_work has no chance to run in 5 seconds. By setting /proc/sys/kernel/hung_task_timeout_secs to 20 and increasing ATH11K_FLUSH_TIMEOUT to 50 we get below warnings: kernel: [ 120.763160] INFO: task wpa_supplicant:924 blocked for more than 20 seconds. kernel: [ 120.763169] Not tainted 5.10.90 #12 kernel: [ 120.763177] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: [ 120.763186] task:wpa_supplicant state:D stack: 0 pid: 924 ppid: 1 flags:0x000043a0 kernel: [ 120.763201] Call Trace: kernel: [ 120.763214] __schedule+0x785/0x12fa kernel: [ 120.763224] ? lockdep_hardirqs_on_prepare+0xe2/0x1bb kernel: [ 120.763242] schedule+0x7e/0xa1 kernel: [ 120.763253] schedule_timeout+0x98/0xfe kernel: [ 120.763266] ? run_local_timers+0x4a/0x4a kernel: [ 120.763291] ath11k_mac_flush_tx_complete+0x197/0x2b1 [ath11k 13c3a9bf37790f4ac8103b3decf7ab4008ac314a] kernel: [ 120.763306] ? init_wait_entry+0x2e/0x2e kernel: [ 120.763343] __ieee80211_flush_queues+0x167/0x21f [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763378] __ieee80211_recalc_idle+0x105/0x125 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763411] ieee80211_recalc_idle+0x14/0x27 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763441] ieee80211_free_chanctx+0x77/0xa2 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763473] __ieee80211_vif_release_channel+0x100/0x131 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763540] ieee80211_vif_release_channel+0x66/0x81 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763572] ieee80211_destroy_auth_data+0xa3/0xe6 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763612] ieee80211_mgd_deauth+0x178/0x29b [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763654] cfg80211_mlme_deauth+0x1a8/0x22c [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763697] nl80211_deauthenticate+0xfa/0x123 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763715] genl_rcv_msg+0x392/0x3c2 kernel: [ 120.763750] ? nl80211_associate+0x432/0x432 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763782] ? nl80211_associate+0x432/0x432 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763802] ? genl_rcv+0x36/0x36 kernel: [ 120.763814] netlink_rcv_skb+0x89/0xf7 kernel: [ 120.763829] genl_rcv+0x28/0x36 kernel: [ 120.763840] netlink_unicast+0x179/0x24b kernel: [ 120.763854] netlink_sendmsg+0x393/0x401 kernel: [ 120.763872] sock_sendmsg+0x72/0x76 kernel: [ 120.763886] ____sys_sendmsg+0x170/0x1e6 kernel: [ 120.763897] ? copy_msghdr_from_user+0x7a/0xa2 kernel: [ 120.763914] ___sys_sendmsg+0x95/0xd1 kernel: [ 120.763940] __sys_sendmsg+0x85/0xbf kernel: [ 120.763956] do_syscall_64+0x43/0x55 kernel: [ 120.763966] entry_SYSCALL_64_after_hwframe+0x44/0xa9 kernel: [ 120.763977] RIP: 0033:0x79089f3fcc83 kernel: [ 120.763986] RSP: 002b:00007ffe604f0508 EFLAGS: 00000246 ORIG_RAX: 000000000000002e kernel: [ 120.763997] RAX: ffffffffffffffda RBX: 000059b40e987690 RCX: 000079089f3fcc83 kernel: [ 120.764006] RDX: 0000000000000000 RSI: 00007ffe604f0558 RDI: 0000000000000009 kernel: [ 120.764014] RBP: 00007ffe604f0540 R08: 0000000000000004 R09: 0000000000400000 kernel: [ 120.764023] R10: 00007ffe604f0638 R11: 0000000000000246 R12: 000059b40ea04980 kernel: [ 120.764032] R13: 00007ffe604f0638 R14: 000059b40e98c360 R15: 00007ffe604f0558 ... kernel: [ 120.765230] INFO: task kworker/u32:26:4239 blocked for more than 20 seconds. kernel: [ 120.765238] Not tainted 5.10.90 #12 kernel: [ 120.765245] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: [ 120.765253] task:kworker/u32:26 state:D stack: 0 pid: 4239 ppid: 2 flags:0x00004080 kernel: [ 120.765284] Workqueue: phy0 ieee80211_iface_work [mac80211] kernel: [ 120.765295] Call Trace: kernel: [ 120.765306] __schedule+0x785/0x12fa kernel: [ 120.765316] ? find_held_lock+0x3d/0xb2 kernel: [ 120.765331] schedule+0x7e/0xa1 kernel: [ 120.765340] schedule_preempt_disabled+0x15/0x1e kernel: [ 120.765349] __mutex_lock_common+0x561/0xc0d kernel: [ 120.765375] ? ieee80211_sta_work+0x3e/0x1232 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.765390] mutex_lock_nested+0x20/0x26 kernel: [ 120.765416] ieee80211_sta_work+0x3e/0x1232 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.765430] ? skb_dequeue+0x54/0x5e kernel: [ 120.765456] ? ieee80211_iface_work+0x7b/0x339 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.765485] process_one_work+0x270/0x504 kernel: [ 120.765501] worker_thread+0x215/0x376 kernel: [ 120.765514] kthread+0x159/0x168 kernel: [ 120.765526] ? pr_cont_work+0x5b/0x5b kernel: [ 120.765536] ? kthread_blkcg+0x31/0x31 kernel: [ 120.765550] ret_from_fork+0x22/0x30 ... kernel: [ 120.765867] Showing all locks held in the system: ... kernel: [ 120.766164] 5 locks held by wpa_supplicant/924: kernel: [ 120.766172] #0: ffffffffb1e63eb0 (cb_lock){++++}-{3:3}, at: genl_rcv+0x19/0x36 kernel: [ 120.766197] #1: ffffffffb1e5b1c8 (rtnl_mutex){+.+.}-{3:3}, at: nl80211_pre_doit+0x2a/0x15c [cfg80211] kernel: [ 120.766238] #2: ffff99f08347cd08 (&wdev->mtx){+.+.}-{3:3}, at: nl80211_deauthenticate+0xde/0x123 [cfg80211] kernel: [ 120.766279] #3: ffff99f09df12a48 (&local->mtx){+.+.}-{3:3}, at: ieee80211_destroy_auth_data+0x9b/0xe6 [mac80211] kernel: [ 120.766321] #4: ffff99f09df12ce0 (&local->chanctx_mtx){+.+.}-{3:3}, at: ieee80211_vif_release_channel+0x5e/0x81 [mac80211] ... kernel: [ 120.766585] 3 locks held by kworker/u32:26/4239: kernel: [ 120.766593] #0: ffff99f04458f948 ((wq_completion)phy0){+.+.}-{0:0}, at: process_one_work+0x19a/0x504 kernel: [ 120.766621] #1: ffffbad54b3cfe50 ((work_completion)(&sdata->work)){+.+.}-{0:0}, at: process_one_work+0x1c0/0x504 kernel: [ 120.766649] #2: ffff99f08347cd08 (&wdev->mtx){+.+.}-{3:3}, at: ieee80211_sta_work+0x3e/0x1232 [mac80211] With above info the issue is clear: First wmi_mgmt_tx_work is inserted to local->workqueue after sdata->work inserted, then wpa_supplicant acquires wdev->mtx in nl80211_deauthenticate and finally calls ath11k_mac_op_flush where it waits all mgmt. frames to be sent out by wmi_mgmt_tx_work. Meanwhile, sdata->work is blocked by wdev->mtx in ieee80211_sta_work, as a result wmi_mgmt_tx_work has no chance to run. Change to use ab->workqueue instead of local->workqueue to fix this issue. Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220217084545.18844-1-quic_bqiang@quicinc.com
2022-02-16ieee80211: add EHT 1K aggregation definitionsMordechay Goodstein1-1/+1
We add the fields for parsing extended ADDBA request/respond, and new max 1K aggregation for limit ADDBA request/respond. Adjust drivers to use the proper macro, IEEE80211_MAX_AMPDU_BUF -> IEEE80211_MAX_AMPDU_BUF_HE. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Link: https://lore.kernel.org/r/20220214173004.b8b447ce95b7.I0ee2554c94e89abc7a752b0f7cc7fd79c273efea@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-14ath11k: fix radar detection in 160 MhzVenkateswara Naralasetty1-12/+13
Radar detection fails in the secondary 80 MHz when the the AP's primary 80 MHz is in non-DFS region in 160 MHz. This is due to WMI channel flag WMI_CHAN_INFO_DFS_FREQ2 is not set properly in case of the primary 80 MHz is in non-DFS region. HALPHY detects the radar pulses in the secondary 80 MHz only when WMI_CHAN_INFO_DFS_FREQ2 is set. Fix this issue by setting WMI channel flag WMI_CHAN_INFO_DFS_FREQ2 based on the radar_enabled flag from the channel context. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1644416019-820-2-git-send-email-quic_vnaralas@quicinc.com
2022-02-14ath11k: fix WARN_ON during ath11k_mac_update_vif_chanVenkateswara Naralasetty1-6/+26
Fix WARN_ON() from ath11k_mac_update_vif_chan() if vdev is not up. Since change_chanctx can be called even before vdev_up from ieee80211_start_ap->ieee80211_vif_use_channel-> ieee80211_recalc_radar_chanctx. Do vdev stop followed by a vdev start in case of vdev is down. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1644416019-820-1-git-send-email-quic_vnaralas@quicinc.com
2022-02-01ath11k: add debugfs for TWT debug callsJohn Crispin1-0/+7
New debugfs files to manually add/delete/pause/resume TWT dialogs for test/debug purposes. The debugfs files expect the following parameters - Add dialog echo '<Peer_MAC> <Dialog_ID> <Wake_Interval_Usec> <Wake_Interval_Mantis> <Wake_Duration_Usec> <First_SP_Offset> <TWT_Command> <1:Broadcast /0:Individual> <1:Triggered / 0:Untriggered> <1:Unannounced /0:Announced> <1:Protected / 0:Unprotected>' > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/twt/add_dialog Example (Non-triggered and un-announced): echo '00:03:7F:20:13:52 1 102400 100 30720 20480 4 0 0 1 0' > /sys/kernel/debug/ieee80211/phy0/netdev:wlan0/twt/add_dialog - Delete dialog echo '<Peer_MAC> <Dialog_ID>' > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/twt/del_dialog - Pause dialog echo '<Peer_MAC> <Dialog_ID>' > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/twt/pause_dialog - Resume dialog echo '<Peer_MAC> <Dialog_ID> <SP_Offset_Usec> <Next_TWT_Size>' > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/twt/resume_dialog Example: echo '00:03:7F:20:13:52 1 2000000 3' > /sys/kernel/debug/ieee80211/phy0/netdev:wlan0/twt/resume_dialog Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01179-QCAHKSWPL_SILICONZ-1 Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220131031043.1295-2-alokad@codeaurora.org
2022-01-28ath11k: set WMI_PEER_40MHZ while peer assoc for 6 GHzWen Gong1-0/+3
When station connect to AP of 6 GHz with 40 MHz bandwidth, the TX is always stay 20 MHz, it is because the flag WMI_PEER_40MHZ is not set while peer assoc. Add the flag if remote peer is 40 MHz bandwidth. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Fixes: c3a7d7eb4c98 ("ath11k: add 6 GHz params in peer assoc command") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220119034211.28622-1-quic_wgong@quicinc.com
2022-01-17ath11k: Reconfigure hardware rate for WCN6855 after vdev is startedBaochen Qiang1-0/+18
There is an issue that WCN6855 tries to connect to an AP using a hardware rate of 1Mb/s , even though the AP has announced expected rates as [24, 36, 48, 54] in Probe Response frame. The reason is that WCN6855 firmware clears hardware rate info of management frames when vdev starts and uses 1Mb/s as default. To solve it, reconfigure the rate after vdev is started. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220112025400.2222-1-quic_bqiang@quicinc.com
2022-01-12ath11k: free peer for station when disconnect from AP for QCA6390/WCN6855Wen Gong1-13/+18
Commit b4a0f54156ac ("ath11k: move peer delete after vdev stop of station for QCA6390 and WCN6855") is to fix firmware crash by changing the WMI command sequence, but actually skip all the peer delete operation, then it lead commit 58595c9874c6 ("ath11k: Fixing dangling pointer issue upon peer delete failure") not take effect, and then happened a use-after-free warning from KASAN. because the peer->sta is not set to NULL and then used later. Change to only skip the WMI_PEER_DELETE_CMDID for QCA6390/WCN6855. log of user-after-free: [ 534.888665] BUG: KASAN: use-after-free in ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888696] Read of size 8 at addr ffff8881396bb1b8 by task rtcwake/2860 [ 534.888705] CPU: 4 PID: 2860 Comm: rtcwake Kdump: loaded Tainted: G W 5.15.0-wt-ath+ #523 [ 534.888712] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 [ 534.888716] Call Trace: [ 534.888720] <IRQ> [ 534.888726] dump_stack_lvl+0x57/0x7d [ 534.888736] print_address_description.constprop.0+0x1f/0x170 [ 534.888745] ? ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888771] kasan_report.cold+0x83/0xdf [ 534.888783] ? ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888810] ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888840] ath11k_dp_rx_process_mon_status+0x529/0xa70 [ath11k] [ 534.888874] ? ath11k_dp_rx_mon_status_bufs_replenish+0x3f0/0x3f0 [ath11k] [ 534.888897] ? check_prev_add+0x20f0/0x20f0 [ 534.888922] ? __lock_acquire+0xb72/0x1870 [ 534.888937] ? find_held_lock+0x33/0x110 [ 534.888954] ath11k_dp_rx_process_mon_rings+0x297/0x520 [ath11k] [ 534.888981] ? rcu_read_unlock+0x40/0x40 [ 534.888990] ? ath11k_dp_rx_pdev_alloc+0xd90/0xd90 [ath11k] [ 534.889026] ath11k_dp_service_mon_ring+0x67/0xe0 [ath11k] [ 534.889053] ? ath11k_dp_rx_process_mon_rings+0x520/0x520 [ath11k] [ 534.889075] call_timer_fn+0x167/0x4a0 [ 534.889084] ? add_timer_on+0x3b0/0x3b0 [ 534.889103] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370 [ 534.889117] __run_timers.part.0+0x539/0x8b0 [ 534.889123] ? ath11k_dp_rx_process_mon_rings+0x520/0x520 [ath11k] [ 534.889157] ? call_timer_fn+0x4a0/0x4a0 [ 534.889164] ? mark_lock_irq+0x1c30/0x1c30 [ 534.889173] ? clockevents_program_event+0xdd/0x280 [ 534.889189] ? mark_held_locks+0xa5/0xe0 [ 534.889203] run_timer_softirq+0x97/0x180 [ 534.889213] __do_softirq+0x276/0x86a [ 534.889230] __irq_exit_rcu+0x11c/0x180 [ 534.889238] irq_exit_rcu+0x5/0x20 [ 534.889244] sysvec_apic_timer_interrupt+0x8e/0xc0 [ 534.889251] </IRQ> [ 534.889254] <TASK> [ 534.889259] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 534.889265] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70 [ 534.889271] Code: 74 24 10 e8 ea c2 bf fd 48 89 ef e8 12 53 c0 fd 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 13 a7 b5 fd 65 8b 05 cc d9 9c 5e 85 c0 74 0a 5b 5d c3 e8 a0 ee [ 534.889276] RSP: 0018:ffffc90002e5f880 EFLAGS: 00000206 [ 534.889284] RAX: 0000000000000006 RBX: 0000000000000200 RCX: ffffffff9f256f10 [ 534.889289] RDX: 0000000000000000 RSI: ffffffffa1c6e420 RDI: 0000000000000001 [ 534.889293] RBP: ffff8881095e6200 R08: 0000000000000001 R09: ffffffffa40d2b8f [ 534.889298] R10: fffffbfff481a571 R11: 0000000000000001 R12: ffff8881095e6e68 [ 534.889302] R13: ffffc90002e5f908 R14: 0000000000000246 R15: 0000000000000000 [ 534.889316] ? mark_lock+0xd0/0x14a0 [ 534.889332] klist_next+0x1d4/0x450 [ 534.889340] ? dpm_wait_for_subordinate+0x2d0/0x2d0 [ 534.889350] device_for_each_child+0xa8/0x140 [ 534.889360] ? device_remove_class_symlinks+0x1b0/0x1b0 [ 534.889370] ? __lock_release+0x4bd/0x9f0 [ 534.889378] ? dpm_suspend+0x26b/0x3f0 [ 534.889390] dpm_wait_for_subordinate+0x82/0x2d0 [ 534.889400] ? dpm_for_each_dev+0xa0/0xa0 [ 534.889410] ? dpm_suspend+0x233/0x3f0 [ 534.889427] __device_suspend+0xd4/0x10c0 [ 534.889440] ? wait_for_completion_io+0x270/0x270 [ 534.889456] ? async_suspend_late+0xe0/0xe0 [ 534.889463] ? async_schedule_node_domain+0x468/0x640 [ 534.889482] dpm_suspend+0x25a/0x3f0 [ 534.889491] ? dpm_suspend_end+0x1a0/0x1a0 [ 534.889497] ? ktime_get+0x214/0x2f0 [ 534.889502] ? lockdep_hardirqs_on+0x79/0x100 [ 534.889509] ? recalibrate_cpu_khz+0x10/0x10 [ 534.889516] ? ktime_get+0x119/0x2f0 [ 534.889528] dpm_suspend_start+0xab/0xc0 [ 534.889538] suspend_devices_and_enter+0x1ca/0x350 [ 534.889546] ? suspend_enter+0x850/0x850 [ 534.889566] enter_state+0x27c/0x3d7 [ 534.889575] pm_suspend.cold+0x42/0x189 [ 534.889583] state_store+0xab/0x160 [ 534.889595] ? sysfs_file_ops+0x160/0x160 [ 534.889601] kernfs_fop_write_iter+0x2b5/0x450 [ 534.889615] new_sync_write+0x36a/0x600 [ 534.889625] ? new_sync_read+0x600/0x600 [ 534.889639] ? rcu_read_unlock+0x40/0x40 [ 534.889668] vfs_write+0x619/0x910 [ 534.889681] ksys_write+0xf4/0x1d0 [ 534.889689] ? __ia32_sys_read+0xa0/0xa0 [ 534.889699] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370 [ 534.889707] ? syscall_enter_from_user_mode+0x1d/0x50 [ 534.889719] do_syscall_64+0x3b/0x90 [ 534.889725] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 534.889731] RIP: 0033:0x7f0b9bc931e7 [ 534.889736] Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 534.889741] RSP: 002b:00007ffd9d34cc88 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 534.889749] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f0b9bc931e7 [ 534.889753] RDX: 0000000000000004 RSI: 0000561cd023c5f0 RDI: 0000000000000004 [ 534.889757] RBP: 0000561cd023c5f0 R08: 0000000000000000 R09: 0000000000000004 [ 534.889761] R10: 0000561ccef842a6 R11: 0000000000000246 R12: 0000000000000004 [ 534.889765] R13: 0000561cd0239590 R14: 00007f0b9bd6f4a0 R15: 00007f0b9bd6e8a0 [ 534.889789] </TASK> [ 534.889796] Allocated by task 2711: [ 534.889800] kasan_save_stack+0x1b/0x40 [ 534.889805] __kasan_kmalloc+0x7c/0x90 [ 534.889810] sta_info_alloc+0x98/0x1ef0 [mac80211] [ 534.889874] ieee80211_prep_connection+0x30b/0x11e0 [mac80211] [ 534.889950] ieee80211_mgd_auth+0x529/0xe00 [mac80211] [ 534.890024] cfg80211_mlme_auth+0x332/0x6f0 [cfg80211] [ 534.890090] nl80211_authenticate+0x839/0xcf0 [cfg80211] [ 534.890147] genl_family_rcv_msg_doit+0x1f4/0x2f0 [ 534.890154] genl_rcv_msg+0x280/0x500 [ 534.890160] netlink_rcv_skb+0x11c/0x340 [ 534.890165] genl_rcv+0x1f/0x30 [ 534.890170] netlink_unicast+0x42b/0x700 [ 534.890176] netlink_sendmsg+0x71b/0xc60 [ 534.890181] sock_sendmsg+0xdf/0x110 [ 534.890187] ____sys_sendmsg+0x5c0/0x850 [ 534.890192] ___sys_sendmsg+0xe4/0x160 [ 534.890197] __sys_sendmsg+0xb2/0x140 [ 534.890202] do_syscall_64+0x3b/0x90 [ 534.890207] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 534.890215] Freed by task 2825: [ 534.890218] kasan_save_stack+0x1b/0x40 [ 534.890223] kasan_set_track+0x1c/0x30 [ 534.890227] kasan_set_free_info+0x20/0x30 [ 534.890232] __kasan_slab_free+0xce/0x100 [ 534.890237] slab_free_freelist_hook+0xf0/0x1a0 [ 534.890242] kfree+0xe5/0x370 [ 534.890248] __sta_info_flush+0x333/0x4b0 [mac80211] [ 534.890308] ieee80211_set_disassoc+0x324/0xd20 [mac80211] [ 534.890382] ieee80211_mgd_deauth+0x537/0xee0 [mac80211] [ 534.890472] cfg80211_mlme_deauth+0x349/0x810 [cfg80211] [ 534.890526] cfg80211_mlme_down+0x1ce/0x270 [cfg80211] [ 534.890578] cfg80211_disconnect+0x4f5/0x7b0 [cfg80211] [ 534.890631] cfg80211_leave+0x24/0x40 [cfg80211] [ 534.890677] wiphy_suspend+0x23d/0x2f0 [cfg80211] [ 534.890723] dpm_run_callback+0xf4/0x1b0 [ 534.890728] __device_suspend+0x648/0x10c0 [ 534.890733] async_suspend+0x16/0xe0 [ 534.890737] async_run_entry_fn+0x90/0x4f0 [ 534.890741] process_one_work+0x866/0x1490 [ 534.890747] worker_thread+0x596/0x1010 [ 534.890751] kthread+0x35d/0x420 [ 534.890756] ret_from_fork+0x22/0x30 [ 534.890763] The buggy address belongs to the object at ffff8881396ba000 which belongs to the cache kmalloc-8k of size 8192 [ 534.890767] The buggy address is located 4536 bytes inside of 8192-byte region [ffff8881396ba000, ffff8881396bc000) [ 534.890772] The buggy address belongs to the page: [ 534.890775] page:ffffea0004e5ae00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1396b8 [ 534.890780] head:ffffea0004e5ae00 order:3 compound_mapcount:0 compound_pincount:0 [ 534.890784] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 534.890791] raw: 0200000000010200 ffffea000562be08 ffffea0004b04c08 ffff88810004e340 [ 534.890795] raw: 0000000000000000 0000000000010001 00000001ffffffff 0000000000000000 [ 534.890798] page dumped because: kasan: bad access detected [ 534.890804] Memory state around the buggy address: [ 534.890807] ffff8881396bb080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 534.890811] ffff8881396bb100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 534.890814] >ffff8881396bb180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 534.890817] ^ [ 534.890821] ffff8881396bb200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 534.890824] ffff8881396bb280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 534.890827] ================================================================== [ 534.890830] Disabling lock debugging due to kernel taint Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Fixes: b4a0f54156ac ("ath11k: move peer delete after vdev stop of station for QCA6390 and WCN6855") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211222070431.29595-1-quic_wgong@quicinc.com
2021-12-20ath11k: add support for hardware rfkill for QCA6390Wen Gong1-0/+58
When hardware rfkill is enabled in the firmware it will report the capability via using WMI_SYS_CAP_INFO_RFKILL bit in the WMI_SERVICE_READY event to the host. ath11k will check the capability, and if it is enabled then ath11k will set the GPIO information to firmware using WMI_PDEV_SET_PARAM. When the firmware detects hardware rfkill is enabled by the user, it will report it via WMI_RFKILL_STATE_CHANGE_EVENTID. Once ath11k receives the event it will send wmi command WMI_PDEV_SET_PARAM to the firmware and also notifies cfg80211. This only enable rfkill feature for QCA6390, rfkill_pin is all initialized to 0 for other chips in ath11k_hw_params. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211217102334.14907-1-quic_wgong@quicinc.com
2021-12-20ath11k: report tx bitrate for iw wlan station dumpWen Gong1-0/+93
HTT_T2H_MSG_TYPE_PPDU_STATS_IND is a message which include the ppdu info, currently it is not report from firmware for ath11k, then the tx bitrate of "iw wlan0 station dump" always show an invalid value "tx bitrate: 6.0 MBit/s". To address the issue, this is to parse the info of tx complete report from firmware and indicate the tx rate to mac80211. After that, "iw wlan0 station dump" show the correct tx bit rate such as: tx bitrate: 78.0 MBit/s MCS 12 tx bitrate: 144.4 MBit/s VHT-MCS 7 short GI VHT-NSS 2 tx bitrate: 286.7 MBit/s HE-MCS 11 HE-NSS 2 HE-GI 0 HE-DCM 0 tx bitrate: 1921.5 MBit/s 160MHz HE-MCS 9 HE-NSS 2 HE-GI 0 HE-DCM 0 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211217093722.5739-1-quic_wgong@quicinc.com
2021-12-20ath11k: add signal report to mac80211 for QCA6390 and WCN6855Wen Gong1-3/+19
IEEE80211_HW_USES_RSS is set in ath11k, then the device uses RSS and thus requires parallel RX which implies using per-CPU station statistics in sta_get_last_rx_stats() of mac80211. Currently signal is only set in ath11k_mgmt_rx_event(), and not set for RX data packet, then it show signal as 0 for iw command easily. Change to get signal from firmware and report to mac80211. For QCA6390 and WCN6855, the rssi value is already in dbm unit, so don't need to convert it again. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211216070535.31732-1-quic_wgong@quicinc.com
2021-12-20ath11k: report rssi of each chain to mac80211 for QCA6390/WCN6855Wen Gong1-0/+40
Command "iw wls1 station dump" does not show each chain's rssi currently. If the rssi of each chain from mon status which parsed in function ath11k_hal_rx_parse_mon_status_tlv() is invalid, then ath11k send wmi cmd WMI_REQUEST_STATS_CMDID with flag WMI_REQUEST_RSSI_PER_CHAIN_STAT to firmware, and parse the rssi of chain in wmi WMI_UPDATE_STATS_EVENTID, then report them to mac80211. WMI_REQUEST_STATS_CMDID is only sent when CONFIG_ATH11K_DEBUGFS is set, it is only called by ath11k_mac_op_sta_statistics(). It does not effect performance and power consumption. Because after STATION connected to AP, it is only called every 6 seconds by NetworkManager in below stack. [ 797.005587] CPU: 0 PID: 701 Comm: NetworkManager Tainted: G W OE 5.13.0-rc6-wt-ath+ #2 [ 797.005596] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011 [ 797.005600] RIP: 0010:ath11k_mac_op_sta_statistics+0x2f/0x1b0 [ath11k] [ 797.005644] Code: 41 56 41 55 4c 8d aa 58 01 00 00 41 54 55 48 89 d5 53 48 8b 82 58 01 00 00 48 89 cb 4c 8b 70 20 49 8b 06 4c 8b a0 90 08 00 00 <0f> 0b 48 8b 82 b8 01 00 00 48 ba 00 00 00 00 01 00 00 00 48 89 81 [ 797.005651] RSP: 0018:ffffb1fc80a4b890 EFLAGS: 00010282 [ 797.005658] RAX: ffff8a5726200000 RBX: ffffb1fc80a4b958 RCX: ffffb1fc80a4b958 [ 797.005664] RDX: ffff8a5726a609f0 RSI: ffff8a581247f598 RDI: ffff8a5702878800 [ 797.005668] RBP: ffff8a5726a609f0 R08: 0000000000000000 R09: 0000000000000000 [ 797.005672] R10: 0000000000000000 R11: 0000000000000007 R12: 02dd68024f75f480 [ 797.005676] R13: ffff8a5726a60b48 R14: ffff8a5702879f40 R15: ffff8a5726a60000 [ 797.005681] FS: 00007f632c52a380(0000) GS:ffff8a583a200000(0000) knlGS:0000000000000000 [ 797.005687] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 797.005692] CR2: 00007fb025d69000 CR3: 00000001124f6005 CR4: 00000000000606f0 [ 797.005698] Call Trace: [ 797.005710] sta_set_sinfo+0xa7/0xb80 [mac80211] [ 797.005820] ieee80211_get_station+0x50/0x70 [mac80211] [ 797.005925] nl80211_get_station+0xd1/0x200 [cfg80211] [ 797.006045] genl_family_rcv_msg_doit.isra.15+0x111/0x140 [ 797.006059] genl_rcv_msg+0xe6/0x1e0 [ 797.006065] ? nl80211_dump_station+0x220/0x220 [cfg80211] [ 797.006223] ? nl80211_send_station.isra.72+0xf50/0xf50 [cfg80211] [ 797.006348] ? genl_family_rcv_msg_doit.isra.15+0x140/0x140 [ 797.006355] netlink_rcv_skb+0xb9/0xf0 [ 797.006363] genl_rcv+0x24/0x40 [ 797.006369] netlink_unicast+0x18e/0x290 [ 797.006375] netlink_sendmsg+0x30f/0x450 [ 797.006382] sock_sendmsg+0x5b/0x60 [ 797.006393] ____sys_sendmsg+0x219/0x240 [ 797.006403] ? copy_msghdr_from_user+0x5c/0x90 [ 797.006413] ? ____sys_recvmsg+0xf5/0x190 [ 797.006422] ___sys_sendmsg+0x88/0xd0 [ 797.006432] ? copy_msghdr_from_user+0x5c/0x90 [ 797.006443] ? ___sys_recvmsg+0x9e/0xd0 [ 797.006454] ? __fget_files+0x58/0x90 [ 797.006461] ? __fget_light+0x2d/0x70 [ 797.006466] ? do_epoll_wait+0xce/0x720 [ 797.006476] ? __sys_sendmsg+0x63/0xa0 [ 797.006485] __sys_sendmsg+0x63/0xa0 [ 797.006497] do_syscall_64+0x3c/0xb0 [ 797.006509] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 797.006519] RIP: 0033:0x7f632d99912d [ 797.006526] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 ca ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2f 44 89 c7 48 89 44 24 08 e8 fe ee ff ff 48 [ 797.006533] RSP: 002b:00007ffd80808c00 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 797.006540] RAX: ffffffffffffffda RBX: 0000563dab99d840 RCX: 00007f632d99912d [ 797.006545] RDX: 0000000000000000 RSI: 00007ffd80808c50 RDI: 000000000000000b [ 797.006549] RBP: 00007ffd80808c50 R08: 0000000000000000 R09: 0000000000001000 [ 797.006552] R10: 0000563dab96f010 R11: 0000000000000293 R12: 0000563dab99d840 [ 797.006556] R13: 0000563dabbb28c0 R14: 00007f632dad4280 R15: 0000563dabab11c0 [ 797.006563] ---[ end trace c9dcf08920c9945c ]--- Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01230-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-02892.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211215090944.19729-1-quic_wgong@quicinc.com
2021-12-14ath11k: add ab to TARGET_NUM_VDEVS & coKalle Valo1-5/+5
The next patch changes TARGET_NUM_VDEVS to be dynamic and need access to ab. Add ab separately to keep the next patch simple. Compile tested only. Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211209104351.9811-2-kvalo@kernel.org
2021-12-14ath11k: Fix a NULL pointer dereference in ath11k_mac_op_hw_scan()Zhou Qingyang1-2/+5
In ath11k_mac_op_hw_scan(), the return value of kzalloc() is directly used in memcpy(), which may lead to a NULL pointer dereference on failure of kzalloc(). Fix this bug by adding a check of arg.extraie.ptr. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_ATH11K=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211202155348.71315-1-zhou1615@umn.edu
2021-12-13ath11k: Fix deleting uninitialized kernel timer during fragment cache flushRameshkumar Sundaram1-1/+1
frag_timer will be created & initialized for stations when they associate and will be deleted during every key installation while flushing old fragments. For AP interface self peer will be created and Group keys will be installed for this peer, but there will be no real Station entry & hence frag_timer won't be created and initialized, deleting such uninitialized kernel timers causes below warnings and backtraces printed with CONFIG_DEBUG_OBJECTS_TIMERS enabled. [ 177.828008] ODEBUG: assert_init not available (active state 0) object type: timer_list hint: 0x0 [ 177.836833] WARNING: CPU: 3 PID: 188 at lib/debugobjects.c:508 debug_print_object+0xb0/0xf0 [ 177.845185] Modules linked in: ath11k_pci ath11k qmi_helpers qrtr_mhi qrtr ns mhi [ 177.852679] CPU: 3 PID: 188 Comm: hostapd Not tainted 5.14.0-rc3-32919-g4034139e1838-dirty #14 [ 177.865805] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) [ 177.871804] pc : debug_print_object+0xb0/0xf0 [ 177.876155] lr : debug_print_object+0xb0/0xf0 [ 177.880505] sp : ffffffc01169b5a0 [ 177.883810] x29: ffffffc01169b5a0 x28: ffffff80081c2320 x27: ffffff80081c4078 [ 177.890942] x26: ffffff8003fe8f28 x25: ffffff8003de9890 x24: ffffffc01134d738 [ 177.898075] x23: ffffffc010948f20 x22: ffffffc010b2d2e0 x21: ffffffc01169b628 [ 177.905206] x20: ffffffc01134d700 x19: ffffffc010c80d98 x18: 00000000000003f6 [ 177.912339] x17: 203a657079742074 x16: 63656a626f202930 x15: 0000000000000152 [ 177.919471] x14: 0000000000000152 x13: 00000000ffffffea x12: ffffffc010d732e0 [ 177.926603] x11: 0000000000000003 x10: ffffffc010d432a0 x9 : ffffffc010d432f8 [ 177.933735] x8 : 000000000002ffe8 x7 : c0000000ffffdfff x6 : 0000000000000001 [ 177.940866] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff [ 177.947997] x2 : ffffffc010c93240 x1 : ffffff80023624c0 x0 : 0000000000000054 [ 177.955130] Call trace: [ 177.957567] debug_print_object+0xb0/0xf0 [ 177.961570] debug_object_assert_init+0x124/0x178 [ 177.966269] try_to_del_timer_sync+0x1c/0x70 [ 177.970536] del_timer_sync+0x30/0x50 [ 177.974192] ath11k_peer_frags_flush+0x34/0x68 [ath11k] [ 177.979439] ath11k_mac_op_set_key+0x1e4/0x338 [ath11k] [ 177.984673] ieee80211_key_enable_hw_accel+0xc8/0x3d0 [ 177.989722] ieee80211_key_replace+0x360/0x740 [ 177.994160] ieee80211_key_link+0x16c/0x210 [ 177.998337] ieee80211_add_key+0x138/0x338 [ 178.002426] nl80211_new_key+0xfc/0x258 [ 178.006257] genl_family_rcv_msg_doit.isra.17+0xd8/0x120 [ 178.011565] genl_rcv_msg+0xd8/0x1c8 [ 178.015134] netlink_rcv_skb+0x38/0xf8 [ 178.018877] genl_rcv+0x34/0x48 [ 178.022012] netlink_unicast+0x174/0x230 [ 178.025928] netlink_sendmsg+0x188/0x388 [ 178.029845] ____sys_sendmsg+0x218/0x250 [ 178.033763] ___sys_sendmsg+0x68/0x90 [ 178.037418] __sys_sendmsg+0x44/0x88 [ 178.040988] __arm64_sys_sendmsg+0x20/0x28 [ 178.045077] invoke_syscall.constprop.5+0x54/0xe0 [ 178.049776] do_el0_svc+0x74/0xc0 [ 178.053084] el0_svc+0x10/0x18 [ 178.056133] el0t_64_sync_handler+0x88/0xb0 [ 178.060310] el0t_64_sync+0x148/0x14c [ 178.063966] ---[ end trace 8a5cf0bf9d34a058 ]--- Add changes to not to delete frag timer for peers during group key installation. Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01092-QCAHKSWPL_SILICONZ-1 Fixes: c3944a562102 ("ath11k: Clear the fragment cache during key install") Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1639071421-25078-1-git-send-email-quic_ramess@quicinc.com
2021-12-13ath11k: set DTIM policy to stick mode for station interfaceCarl Huang1-0/+7
Set DTIM policy to DTIM stick mode, so station follows AP DTIM interval rather than listen interval which is set in peer assoc cmd. DTIM stick mode is more preferred per firmware team request. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1638948694-15582-1-git-send-email-quic_cjhuang@quicinc.com
2021-12-13ath11k: support MAC address randomization in scanCarl Huang1-0/+19
The driver reports NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR capability to upper layer based on the service bit firmware reported. Driver sets the spoofed flag in scan_ctrl_flag to firmware if upper layer has enabled this feature in scan request. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1638948007-9609-1-git-send-email-quic_cjhuang@quicinc.com
2021-12-09ath11k: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS for WCN6855Wen Gong1-0/+3
Currently mac80211 will send 3 scan request for each scan of WCN6855, they are 2.4 GHz/5 GHz/6 GHz band scan. Firmware of WCN6855 will cache the RNR IE(Reduced Neighbor Report element) which exist in the beacon of 2.4 GHz/5 GHz of the AP which is co-located with 6 GHz, and then use the cache to scan in 6 GHz band scan if the 6 GHz scan is in the same scan with the 2.4 GHz/5 GHz band, this will helpful to search more AP of 6 GHz. Also it will decrease the time cost of scan because firmware will use dual-band scan for the 2.4 GHz/5 GHz, it means the 2.4 GHz and 5 GHz scans are doing simultaneously. Set the flag IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS for WCN6855 since it supports 2.4 GHz/5 GHz/6 GHz and it is single pdev which means all the 2.4 GHz/5 GHz/6 GHz exist in the same wiphy/ieee80211_hw. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211129101309.2931-1-quic_wgong@quicinc.com
2021-12-08ath11k: add wait operation for tx management packets for flush from mac80211Wen Gong1-9/+42
In ath11k, tx of management packet is doing in a work queue. Sometimes the workqueue does not finish tx immediately, then it lead after the next step of vdev delete finished, it start to send the management packet to firmware and lead firmware crash. ieee80211_set_disassoc() have logic of ieee80211_flush_queues() after it send_deauth_disassoc() to ath11k, its purpose is make sure the deauth was actually sent, so it need to change ath11k to match the purpose of mac80211. To address these issue wait for tx mgmt as well as tx data packets. dmesg log of connect/disconnect to AP: [ 307.522226] wls1: authenticate with 62:66:e4:e9:6a:a9 [ 307.586565] wls1: send auth to 62:66:e4:e9:6a:a9 (try 1/3) [ 307.586581] ath11k_pci 0000:05:00.0: mac tx mgmt frame, buf id 0 [ 307.586922] ath11k_pci 0000:05:00.0: mac tx mgmt frame, vdev_id 0 [ 307.590179] ath11k_pci 0000:05:00.0: wmi mgmt tx comp pending 0 desc id 0 [ 307.590181] ath11k_pci 0000:05:00.0: mgmt tx compl ev pdev_id 2, desc_id 0, status 0 [ 307.598699] wls1: authenticated [ 307.599483] wls1: associate with 62:66:e4:e9:6a:a9 (try 1/3) [ 307.599506] ath11k_pci 0000:05:00.0: mac tx mgmt frame, buf id 0 [ 307.599519] ath11k_pci 0000:05:00.0: mac tx mgmt frame, vdev_id 0 [ 307.603059] ath11k_pci 0000:05:00.0: wmi mgmt tx comp pending 0 desc id 0 [ 307.603063] ath11k_pci 0000:05:00.0: mgmt tx compl ev pdev_id 2, desc_id 0, status 0 [ 307.637105] wls1: associated [ 317.365239] wls1: deauthenticating from 62:66:e4:e9:6a:a9 by local choice (Reason: 3=DEAUTH_LEAVING) [ 317.368104] ath11k_pci 0000:05:00.0: mac tx mgmt frame, buf id 0 [ 317.372622] ath11k_pci 0000:05:00.0: mac tx mgmt frame, vdev_id 0 [ 317.378320] ath11k_pci 0000:05:00.0: wmi mgmt tx comp pending 0 desc id 0 [ 317.378330] ath11k_pci 0000:05:00.0: mgmt tx compl ev pdev_id 2, desc_id 0, status 0 [ 317.378359] ath11k_pci 0000:05:00.0: mac mgmt tx flush mgmt pending 0 [ 317.421066] ath11k_pci 0000:05:00.0: mac mgmt tx flush mgmt pending 0 [ 317.421427] ath11k_pci 0000:05:00.0: mac remove interface (vdev 0) Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01230-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211202063705.14321-1-quic_wgong@quicinc.com
2021-12-08ath11k: add 11d scan offload supportWen Gong1-1/+162
Add handler for WMI_11D_NEW_COUNTRY_EVENTID, WMI_11D_SCAN_START_CMDID, WMI_11D_SCAN_STOP_CMDID. After vdev create for STATION, send WMI_11D_SCAN_START_CMDID to firmware and wait firmware complete it, the scan from mac80211 also need to wait the 11d scan finished, and send WMI_11D_SCAN_STOP_CMDID to firmware before vdev delete for STATION. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01230-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211201071745.17746-4-quic_wgong@quicinc.com
2021-12-07ath11k: change to use dynamic memory for channel list of scanWen Gong1-0/+10
Currently there are about 60 channels for 6 GHz, then the size of chan_list in struct scan_req_params which is 40 is not enough to fill all the channel list of 6 GHz. Use dynamic memory to save the channel list of scan. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211129110939.15711-1-quic_wgong@quicinc.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-23 02:42:06 +0300