summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath10k
AgeCommit message (Collapse)AuthorFilesLines
2023-11-28wifi: ath10k: fix clang-specific fortify warningDmitry Antipov1-1/+1
[ Upstream commit cb4c132ebfeac5962f7258ffc831caa0c4dada1a ] When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've noticed the following (somewhat confusing due to absence of an actual source code location): In file included from drivers/net/wireless/ath/ath10k/debug.c:8: In file included from ./include/linux/module.h:13: In file included from ./include/linux/stat.h:19: In file included from ./include/linux/time.h:60: In file included from ./include/linux/time32.h:13: In file included from ./include/linux/timex.h:67: In file included from ./arch/x86/include/asm/timex.h:5: In file included from ./arch/x86/include/asm/processor.h:23: In file included from ./arch/x86/include/asm/msr.h:11: In file included from ./arch/x86/include/asm/cpumask.h:5: In file included from ./include/linux/cpumask.h:12: In file included from ./include/linux/bitmap.h:11: In file included from ./include/linux/string.h:254: ./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] __read_overflow2_field(q_size_field, size); The compiler actually complains on 'ath10k_debug_get_et_strings()' where fortification logic inteprets call to 'memcpy()' as an attempt to copy the whole 'ath10k_gstrings_stats' array from it's first member and so issues an overread warning. This warning may be silenced by passing an address of the whole array and not the first member to 'memcpy()'. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230829093652.234537-1-dmantipov@yandex.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23wifi: ath10k: Use RMW accessors for changing LNKCTLIlpo Järvinen1-4/+5
[ Upstream commit f139492a09f15254fa261245cdbd65555cdf39e3 ] Don't assume that only the driver would be accessing LNKCTL. ASPM policy changes can trigger write to LNKCTL outside of driver's control. Use RMW capability accessors which does proper locking to avoid losing concurrent updates to the register value. On restore, clear the ASPMC field properly. Suggested-by: Lukas Wunner <lukas@wunner.de> Fixes: 76d870ed09ab ("ath10k: enable ASPM") Link: https://lore.kernel.org/r/20230717120503.15276-11-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-11treewide: Remove uninitialized_var() usageKees Cook1-1/+1
commit 3f649ab728cda8038259d8f14492fe400fbab911 upstream. Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18wifi: ath10k: Fix return value in ath10k_pci_init()Xiu Jianfeng1-8/+12
[ Upstream commit 2af7749047d8d6ad43feff69f555a13a6a6c2831 ] This driver is attempting to register to support two different buses. if either of these is successful then ath10k_pci_init() should return 0 so that hardware attached to the successful bus can be probed and supported. only if both of these are unsuccessful should ath10k_pci_init() return an errno. Fixes: 0b523ced9a3c ("ath10k: add basic skeleton to support ahb") Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221110061926.18163-1-xiujianfeng@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state()Wen Gong1-25/+29
[ Upstream commit f020d9570a04df0762a2ac5c50cf1d8c511c9164 ] When peer delete failed in a disconnect operation, use-after-free detected by KFENCE in below log. It is because for each vdev_id and address, it has only one struct ath10k_peer, it is allocated in ath10k_peer_map_event(). When connected to an AP, it has more than one HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the array peer_map of struct ath10k will be set muti-elements to the same ath10k_peer in ath10k_peer_map_event(). When peer delete failed in ath10k_sta_state(), the ath10k_peer will be free for the 1st peer id in array peer_map of struct ath10k, and then use-after-free happened for the 2nd peer id because they map to the same ath10k_peer. And clean up all peers in array peer_map for the ath10k_peer, then user-after-free disappeared peer map event log: [ 306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e [ 306.957187] ath10k_pci 0000:01:00.0: mac vdev 0 peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33 [ 306.957395] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 166 peer unmap event log: [ 435.715691] wlan0: deauthenticating from b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING) [ 435.716802] ath10k_pci 0000:01:00.0: mac vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone) [ 435.717177] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 435.717186] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 435.717193] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 166 use-after-free log: [21705.888627] wlan0: deauthenticating from d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING) [21713.799910] ath10k_pci 0000:01:00.0: failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110 [21713.799925] ath10k_pci 0000:01:00.0: found sta peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed [21713.799968] ================================================================== [21713.799991] BUG: KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.799991] [21713.799997] Use-after-free read at 0x00000000abe1c75e (in kfence-#69): [21713.800010] ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.800041] drv_sta_state+0x115/0x677 [mac80211] [21713.800059] __sta_info_destroy_part2+0xb1/0x133 [mac80211] [21713.800076] __sta_info_flush+0x11d/0x162 [mac80211] [21713.800093] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211] [21713.800110] ieee80211_mgd_deauth+0x26c/0x29b [mac80211] [21713.800137] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211] [21713.800153] nl80211_deauthenticate+0xf8/0x121 [cfg80211] [21713.800161] genl_rcv_msg+0x38e/0x3be [21713.800166] netlink_rcv_skb+0x89/0xf7 [21713.800171] genl_rcv+0x28/0x36 [21713.800176] netlink_unicast+0x179/0x24b [21713.800181] netlink_sendmsg+0x3a0/0x40e [21713.800187] sock_sendmsg+0x72/0x76 [21713.800192] ____sys_sendmsg+0x16d/0x1e3 [21713.800196] ___sys_sendmsg+0x95/0xd1 [21713.800200] __sys_sendmsg+0x85/0xbf [21713.800205] do_syscall_64+0x43/0x55 [21713.800210] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [21713.800213] [21713.800219] kfence-#69: 0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k [21713.800219] [21713.800224] allocated by task 13 on cpu 0 at 21705.501373s: [21713.800241] ath10k_peer_map_event+0x7e/0x154 [ath10k_core] [21713.800254] ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core] [21713.800265] ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core] [21713.800277] ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core] [21713.800283] ath10k_pci_process_rx_cb+0x195/0x1df [ath10k_pci] [21713.800294] ath10k_ce_per_engine_service+0x55/0x74 [ath10k_core] [21713.800305] ath10k_ce_per_engine_service_any+0x76/0x84 [ath10k_core] [21713.800310] ath10k_pci_napi_poll+0x49/0x144 [ath10k_pci] [21713.800316] net_rx_action+0xdc/0x361 [21713.800320] __do_softirq+0x163/0x29a [21713.800325] asm_call_irq_on_stack+0x12/0x20 [21713.800331] do_softirq_own_stack+0x3c/0x48 [21713.800337] __irq_exit_rcu+0x9b/0x9d [21713.800342] common_interrupt+0xc9/0x14d [21713.800346] asm_common_interrupt+0x1e/0x40 [21713.800351] ksoftirqd_should_run+0x5/0x16 [21713.800357] smpboot_thread_fn+0x148/0x211 [21713.800362] kthread+0x150/0x15f [21713.800367] ret_from_fork+0x22/0x30 [21713.800370] [21713.800374] freed by task 708 on cpu 1 at 21713.799953s: [21713.800498] ath10k_sta_state+0x2c6/0xb8a [ath10k_core] [21713.800515] drv_sta_state+0x115/0x677 [mac80211] [21713.800532] __sta_info_destroy_part2+0xb1/0x133 [mac80211] [21713.800548] __sta_info_flush+0x11d/0x162 [mac80211] [21713.800565] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211] [21713.800581] ieee80211_mgd_deauth+0x26c/0x29b [mac80211] [21713.800598] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211] [21713.800614] nl80211_deauthenticate+0xf8/0x121 [cfg80211] [21713.800619] genl_rcv_msg+0x38e/0x3be [21713.800623] netlink_rcv_skb+0x89/0xf7 [21713.800628] genl_rcv+0x28/0x36 [21713.800632] netlink_unicast+0x179/0x24b [21713.800637] netlink_sendmsg+0x3a0/0x40e [21713.800642] sock_sendmsg+0x72/0x76 [21713.800646] ____sys_sendmsg+0x16d/0x1e3 [21713.800651] ___sys_sendmsg+0x95/0xd1 [21713.800655] __sys_sendmsg+0x85/0xbf [21713.800659] do_syscall_64+0x43/0x55 [21713.800663] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1 Fixes: d0eeafad1189 ("ath10k: Clean up peer when sta goes away.") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220801141930.16794-1-quic_wgong@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ath10k: Fix tx hangingSebastian Gottschall2-2/+3
[ Upstream commit e8a91863eba3966a447d2daa1526082d52b5db2a ] While running stress tests in roaming scenarios (switching ap's every 5 seconds, we discovered a issue which leads to tx hangings of exactly 5 seconds while or after scanning for new accesspoints. We found out that this hanging is triggered by ath10k_mac_wait_tx_complete since the empty_tx_wq was not wake when the num_tx_pending counter reaches zero. To fix this, we simply move the wake_up call to htt_tx_dec_pending, since this call was missed on several locations within the ath10k code. Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20210505085806.11474-1-s.gottschall@dd-wrt.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ath10k: fix max antenna gain unitSven Eckelmann2-3/+6
[ Upstream commit 0a491167fe0cf9f26062462de2a8688b96125d48 ] Most of the txpower for the ath10k firmware is stored as twicepower (0.5 dB steps). This isn't the case for max_antenna_gain - which is still expected by the firmware as dB. The firmware is converting it from dB to the internal (twicepower) representation when it calculates the limits of a channel. This can be seen in tpc_stats when configuring "12" as max_antenna_gain. Instead of the expected 12 (6 dB), the tpc_stats shows 24 (12 dB). Tested on QCA9888 and IPQ4019 with firmware 10.4-3.5.3-00057. Fixes: 02256930d9b8 ("ath10k: use proper tx power unit") Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20190611172131.6064-1-sven@narfation.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ath10k: fix division by zero in send pathJohan Hovold1-0/+5
commit a006acb931317aad3a8dd41333ebb0453caf49b8 upstream. Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in ath10k_usb_hif_tx_sg() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 4db66499df91 ("ath10k: add initial USB support") Cc: stable@vger.kernel.org # 4.14 Cc: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211027080819.6675-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26ath10k: fix control-message timeoutJohan Hovold1-1/+1
commit 5286132324230168d3fab6ffc16bfd7de85bdfb4 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 4db66499df91 ("ath10k: add initial USB support") Cc: stable@vger.kernel.org # 4.14 Cc: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211025120522.6045-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22ath10k: fix recent bandwidth conversion bugChristian Lamparter1-18/+24
commit 91493e8e10f0f495b04a5c32096d56ea1f254c93 upstream. The commit "cfg80211: make RATE_INFO_BW_20 the default" changed the index of RATE_INFO_BW_20, but the updates to ath10k missed the special bandwidth calculation case in ath10k_update_per_peer_tx_stats(). This will fix below warning, WARNING: CPU: 0 PID: 609 at net/wireless/util.c:1254 cfg80211_calculate_bitrate+0x174/0x220 invalid rate bw=1, mcs=9, nss=2 (unwind_backtrace) from (cfg80211_calculate_bitrate+0x174/0x220) (cfg80211_calculate_bitrate) from (nl80211_put_sta_rate+0x44/0x1dc)from (nl80211_put_sta_rate) from (nl80211_send_station+0x388/0xaf0) (nl80211_get_station+0xa8/0xec) [ end trace da8257d6a850e91a ] Fixes: 842be75c77cb ("cfg80211: make RATE_INFO_BW_20 the default") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20ath10k: Fix an error code in ath10k_add_interface()Yang Li1-0/+1
[ Upstream commit e9ca70c735ce66fc6a0e02c8b6958434f74ef8de ] When the code execute this if statement, the value of ret is 0. However, we can see from the ath10k_warn() log that the value of ret should be -EINVAL. Clean up smatch warning: drivers/net/wireless/ath/ath10k/mac.c:5596 ath10k_add_interface() warn: missing error code 'ret' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: ccec9038c721 ("ath10k: enable raw encap mode and software crypto engine") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1621939577-62218-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-03ath10k: Validate first subframe of A-MSDU before processing the listSriram R1-4/+57
commit 62a8ff67eba52dae9b107e1fb8827054ed00a265 upstream. In certain scenarios a normal MSDU can be received as an A-MSDU when the A-MSDU present bit of a QoS header gets flipped during reception. Since this bit is unauthenticated, the hardware crypto engine can pass the frame to the driver without any error indication. This could result in processing unintended subframes collected in the A-MSDU list. Hence, validate A-MSDU list by checking if the first frame has a valid subframe header. Comparing the non-aggregated MSDU and an A-MSDU, the fields of the first subframe DA matches the LLC/SNAP header fields of a normal MSDU. In order to avoid processing such frames, add a validation to filter such A-MSDU frames where the first subframe header DA matches with the LLC/SNAP header pattern. Tested-on: QCA9984 hw1.0 PCI 10.4-3.10-00047 Cc: stable@vger.kernel.org Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20210511200110.e6f5eb7b9847.I38a77ae26096862527a5eab73caebd7346af8b66@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07ath10k: fix wmi mgmt tx queue full due to race conditionMiaoqing Pan1-11/+4
[ Upstream commit b55379e343a3472c35f4a1245906db5158cab453 ] Failed to transmit wmi management frames: [84977.840894] ath10k_snoc a000000.wifi: wmi mgmt tx queue is full [84977.840913] ath10k_snoc a000000.wifi: failed to transmit packet, dropping: -28 [84977.840924] ath10k_snoc a000000.wifi: failed to submit frame: -28 [84977.840932] ath10k_snoc a000000.wifi: failed to transmit frame: -28 This issue is caused by race condition between skb_dequeue and __skb_queue_tail. The queue of ‘wmi_mgmt_tx_queue’ is protected by a different lock: ar->data_lock vs list->lock, the result is no protection. So when ath10k_mgmt_over_wmi_tx_work() and ath10k_mac_tx_wmi_mgmt() running concurrently on different CPUs, there appear to be a rare corner cases when the queue length is 1, CPUx (skb_deuque) CPUy (__skb_queue_tail) next=list prev=list struct sk_buff *skb = skb_peek(list); WRITE_ONCE(newsk->next, next); WRITE_ONCE(list->qlen, list->qlen - 1);WRITE_ONCE(newsk->prev, prev); next = skb->next; WRITE_ONCE(next->prev, newsk); prev = skb->prev; WRITE_ONCE(prev->next, newsk); skb->next = skb->prev = NULL; list->qlen++; WRITE_ONCE(next->prev, prev); WRITE_ONCE(prev->next, next); If the instruction ‘next = skb->next’ is executed before ‘WRITE_ONCE(prev->next, newsk)’, newsk will be lost, as CPUx get the old ‘next’ pointer, but the length is still added by one. The final result is the length of the queue will reach the maximum value but the queue is empty. So remove ar->data_lock, and use 'skb_queue_tail' instead of '__skb_queue_tail' to prevent the potential race condition. Also switch to use skb_queue_len_lockless, in case we queue a few SKBs simultaneously. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1.c2-00033-QCAHLSWMTPLZ-1 Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608618887-8857-1-git-send-email-miaoqing@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29ath10k: Release some resources in an error handling pathChristophe JAILLET1-1/+4
[ Upstream commit 6364e693f4a7a89a2fb3dd2cbd6cc06d5fd6e26d ] Should an error occur after calling 'ath10k_usb_create()', it should be undone by a corresponding 'ath10k_usb_destroy()' call Fixes: 4db66499df91 ("ath10k: add initial USB support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201122170358.1346065-1-christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29ath10k: Fix an error handling pathChristophe JAILLET1-0/+2
[ Upstream commit ed3573bc3943c27d2d8e405a242f87ed14572ca1 ] If 'ath10k_usb_create()' fails, we should release some resources and report an error instead of silently continuing. Fixes: 4db66499df91 ("ath10k: add initial USB support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201122170342.1346011-1-christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05ath10k: fix VHT NSS calculation when STBC is enabledSathishkumar Muruganandam1-1/+7
[ Upstream commit 99f41b8e43b8b4b31262adb8ac3e69088fff1289 ] When STBC is enabled, NSTS_SU value need to be accounted for VHT NSS calculation for SU case. Without this fix, 1SS + STBC enabled case was reported wrongly as 2SS in radiotap header on monitor mode capture. Tested-on: QCA9984 10.4-3.10-00047 Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597392971-3897-1-git-send-email-murugana@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05ath10k: start recovery process when payload length exceeds max htc length ↵Wen Gong1-0/+4
for sdio [ Upstream commit 2fd3c8f34d08af0a6236085f9961866ad92ef9ec ] When simulate random transfer fail for sdio write and read, it happened "payload length exceeds max htc length" and recovery later sometimes. Test steps: 1. Add config and update kernel: CONFIG_FAIL_MMC_REQUEST=y CONFIG_FAULT_INJECTION=y CONFIG_FAULT_INJECTION_DEBUG_FS=y 2. Run simulate fail: cd /sys/kernel/debug/mmc1/fail_mmc_request echo 10 > probability echo 10 > times # repeat until hitting issues 3. It happened payload length exceeds max htc length. [ 199.935506] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088 .... [ 264.990191] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088 4. after some time, such as 60 seconds, it start recovery which triggered by wmi command timeout for periodic scan. [ 269.229232] ieee80211 phy0: Hardware restart was requested [ 269.734693] ath10k_sdio mmc1:0001:1: device successfully recovered The simulate fail of sdio is not a real sdio transter fail, it only set an error status in mmc_should_fail_request after the transfer end, actually the transfer is success, then sdio_io_rw_ext_helper will return error status and stop transfer the left data. For example, the really RX len is 286 bytes, then it will split to 2 blocks in sdio_io_rw_ext_helper, one is 256 bytes, left is 30 bytes, if the first 256 bytes get an error status by mmc_should_fail_request,then the left 30 bytes will not read in this RX operation. Then when the next RX arrive, the left 30 bytes will be considered as the header of the read, the top 4 bytes of the 30 bytes will be considered as lookaheads, but actually the 4 bytes is not the lookaheads, so the len from this lookaheads is not correct, it exceeds max htc length 4088 sometimes. When happened exceeds, the buffer chain is not matched between firmware and ath10k, then it need to start recovery ASAP. Recently then recovery will be started by wmi command timeout, but it will be long time later, for example, it is 60+ seconds later from the periodic scan, if it does not have periodic scan, it will be longer. Start recovery when it happened "payload length exceeds max htc length" will be reasonable. This patch only effect sdio chips. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200108031957.22308-3-wgong@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29ath10k: check idx validity in __ath10k_htt_rx_ring_fill_n()Zekun Shen1-0/+8
[ Upstream commit bad60b8d1a7194df38fd7fe4b22f3f4dcf775099 ] The idx in __ath10k_htt_rx_ring_fill_n function lives in consistent dma region writable by the device. Malfunctional or malicious device could manipulate such idx to have a OOB write. Either by htt->rx_ring.netbufs_ring[idx] = skb; or by ath10k_htt_set_paddrs_ring(htt, paddr, idx); The idx can also be negative as it's signed, giving a large memory space to write to. It's possibly exploitable by corruptting a legit pointer with a skb pointer. And then fill skb with payload as rougue object. Part of the log here. Sometimes it appears as UAF when writing to a freed memory by chance. [ 15.594376] BUG: unable to handle page fault for address: ffff887f5c1804f0 [ 15.595483] #PF: supervisor write access in kernel mode [ 15.596250] #PF: error_code(0x0002) - not-present page [ 15.597013] PGD 0 P4D 0 [ 15.597395] Oops: 0002 [#1] SMP KASAN PTI [ 15.597967] CPU: 0 PID: 82 Comm: kworker/u2:2 Not tainted 5.6.0 #69 [ 15.598843] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 15.600438] Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core] [ 15.601389] RIP: 0010:__ath10k_htt_rx_ring_fill_n (linux/drivers/net/wireless/ath/ath10k/htt_rx.c:173) ath10k_core Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200623221105.3486-1-bruceshenzk@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29ath10k: provide survey info as accumulated dataVenkateswara Naralasetty1-1/+1
[ Upstream commit 720e5c03e5cb26d33d97f55192b791bb48478aa5 ] It is expected that the returned counters by .get_survey are monotonic increasing. But the data from ath10k gets reset to zero regularly. Channel active/busy time are then showing incorrect values (less than previous or sometimes zero) for the currently active channel during successive survey dump commands. example: $ iw dev wlan0 survey dump Survey data from wlan0 frequency: 5180 MHz [in use] channel active time: 54995 ms channel busy time: 432 ms channel receive time: 0 ms channel transmit time: 59 ms ... $ iw dev wlan0 survey dump Survey data from wlan0 frequency: 5180 MHz [in use] channel active time: 32592 ms channel busy time: 254 ms channel receive time: 0 ms channel transmit time: 0 ms ... The correct way to handle this is to use the non-clearing WMI_BSS_SURVEY_REQ_TYPE_READ wmi_bss_survey_req_type. The firmware will then accumulate the survey data and handle wrap arounds. Tested-on: QCA9984 hw1.0 10.4-3.5.3-00057 Tested-on: QCA988X hw2.0 10.2.4-1.0-00047 Tested-on: QCA9888 hw2.0 10.4-3.9.0.2-00024 Tested-on: QCA4019 hw1.0 10.4-3.6-00140 Fixes: fa7937e3d5c2 ("ath10k: update bss channel survey information") Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Tested-by: Markus Theil <markus.theil@tu-ilmenau.de> Tested-by: John Deere <24601deerej@gmail.com> [sven@narfation.org: adjust commit message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1592232686-28712-1-git-send-email-kvalo@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01ath10k: use kzalloc to read for ath10k_sdio_hif_diag_readWen Gong1-4/+14
[ Upstream commit 402f2992b4d62760cce7c689ff216ea3bf4d6e8a ] When use command to read values, it crashed. command: dd if=/sys/kernel/debug/ieee80211/phy0/ath10k/mem_value count=1 bs=4 skip=$((0x100233)) It will call to ath10k_sdio_hif_diag_read with address = 0x4008cc and buf_len = 4. Then system crash: [ 1786.013258] Unable to handle kernel paging request at virtual address ffffffc00bd45000 [ 1786.013273] Mem abort info: [ 1786.013281] ESR = 0x96000045 [ 1786.013291] Exception class = DABT (current EL), IL = 32 bits [ 1786.013299] SET = 0, FnV = 0 [ 1786.013307] EA = 0, S1PTW = 0 [ 1786.013314] Data abort info: [ 1786.013322] ISV = 0, ISS = 0x00000045 [ 1786.013330] CM = 0, WnR = 1 [ 1786.013342] swapper pgtable: 4k pages, 39-bit VAs, pgdp = 000000008542a60e [ 1786.013350] [ffffffc00bd45000] pgd=0000000000000000, pud=0000000000000000 [ 1786.013368] Internal error: Oops: 96000045 [#1] PREEMPT SMP [ 1786.013609] Process swapper/0 (pid: 0, stack limit = 0x0000000084b153c6) [ 1786.013623] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.86 #137 [ 1786.013631] Hardware name: MediaTek krane sku176 board (DT) [ 1786.013643] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 1786.013662] pc : __memcpy+0x94/0x180 [ 1786.013678] lr : swiotlb_tbl_unmap_single+0x84/0x150 [ 1786.013686] sp : ffffff8008003c60 [ 1786.013694] x29: ffffff8008003c90 x28: ffffffae96411f80 [ 1786.013708] x27: ffffffae960d2018 x26: ffffff8019a4b9a8 [ 1786.013721] x25: 0000000000000000 x24: 0000000000000001 [ 1786.013734] x23: ffffffae96567000 x22: 00000000000051d4 [ 1786.013747] x21: 0000000000000000 x20: 00000000fe6e9000 [ 1786.013760] x19: 0000000000000004 x18: 0000000000000020 [ 1786.013773] x17: 0000000000000001 x16: 0000000000000000 [ 1786.013787] x15: 00000000ffffffff x14: 00000000000044c0 [ 1786.013800] x13: 0000000000365ba4 x12: 0000000000000000 [ 1786.013813] x11: 0000000000000001 x10: 00000037be6e9000 [ 1786.013826] x9 : ffffffc940000000 x8 : 000000000bd45000 [ 1786.013839] x7 : 0000000000000000 x6 : ffffffc00bd45000 [ 1786.013852] x5 : 0000000000000000 x4 : 0000000000000000 [ 1786.013865] x3 : 0000000000000c00 x2 : 0000000000000004 [ 1786.013878] x1 : fffffff7be6e9004 x0 : ffffffc00bd45000 [ 1786.013891] Call trace: [ 1786.013903] __memcpy+0x94/0x180 [ 1786.013914] unmap_single+0x6c/0x84 [ 1786.013925] swiotlb_unmap_sg_attrs+0x54/0x80 [ 1786.013938] __swiotlb_unmap_sg_attrs+0x8c/0xa4 [ 1786.013952] msdc_unprepare_data+0x6c/0x84 [ 1786.013963] msdc_request_done+0x58/0x84 [ 1786.013974] msdc_data_xfer_done+0x1a0/0x1c8 [ 1786.013985] msdc_irq+0x12c/0x17c [ 1786.013996] __handle_irq_event_percpu+0xe4/0x250 [ 1786.014006] handle_irq_event_percpu+0x28/0x68 [ 1786.014015] handle_irq_event+0x48/0x78 [ 1786.014026] handle_fasteoi_irq+0xd0/0x1a0 [ 1786.014039] __handle_domain_irq+0x84/0xc4 [ 1786.014050] gic_handle_irq+0x124/0x1a4 [ 1786.014059] el1_irq+0xb0/0x128 [ 1786.014072] cpuidle_enter_state+0x298/0x328 [ 1786.014082] cpuidle_enter+0x30/0x40 [ 1786.014094] do_idle+0x190/0x268 [ 1786.014104] cpu_startup_entry+0x24/0x28 [ 1786.014116] rest_init+0xd4/0xe0 [ 1786.014126] start_kernel+0x30c/0x38c [ 1786.014139] Code: f8408423 f80084c3 36100062 b8404423 (b80044c3) [ 1786.014150] ---[ end trace 3b02ddb698ea69ee ]--- [ 1786.015415] Kernel panic - not syncing: Fatal exception in interrupt [ 1786.015433] SMP: stopping secondary CPUs [ 1786.015447] Kernel Offset: 0x2e8d200000 from 0xffffff8008000000 [ 1786.015458] CPU features: 0x0,2188200c [ 1786.015466] Memory Limit: none For sdio chip, it need the memory which is kmalloc, if it is vmalloc from ath10k_mem_value_read, then it have a memory error. kzalloc of ath10k_sdio_hif_diag_read32 is the correct type, so add kzalloc in ath10k_sdio_hif_diag_read to replace the buffer which is vmalloc from ath10k_mem_value_read. This patch only effect sdio chip. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03Revert "ath10k: fix DMA related firmware crashes on multiple devices"Zhi Chen1-1/+1
[ Upstream commit a1769bb68a850508a492e3674ab1e5e479b11254 ] This reverts commit 76d164f582150fd0259ec0fcbc485470bcd8033e. PCIe hung issue was observed on multiple platforms. The issue was reproduced when DUT was configured as AP and associated with 50+ STAs. For QCA9984/QCA9888, the DMA_BURST_SIZE register controls the AXI burst size of the RD/WR access to the HOST MEM. 0 - No split , RAW read/write transfer size from MAC is put out on bus as burst length 1 - Split at 256 byte boundary 2,3 - Reserved With PCIe protocol analyzer, we can see DMA Read crossing 4KB boundary when issue happened. It broke PCIe spec and caused PCIe stuck. So revert the default value from 0 to 1. Tested: IPQ8064 + QCA9984 with firmware 10.4-3.10-00047 QCS404 + QCA9984 with firmware 10.4-3.9.0.2--00044 Synaptics AS370 + QCA9888 with firmware 10.4-3.9.0.2--00040 Signed-off-by: Zhi Chen <zhichen@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27ath10k: adjust skb length in ath10k_sdio_mbox_rx_packetNicolas Boichat1-8/+21
[ Upstream commit b7139960832eb56fa15d390a4b5c8c5739bd0d1a ] When the FW bundles multiple packets, pkt->act_len may be incorrect as it refers to the first packet only (however, the FW will only bundle packets that fit into the same pkt->alloc_len). Before this patch, the skb length would be set (incorrectly) to pkt->act_len in ath10k_sdio_mbox_rx_packet, and then later manually adjusted in ath10k_sdio_mbox_rx_process_packet. The first problem is that ath10k_sdio_mbox_rx_process_packet does not use proper skb_put commands to adjust the length (it directly changes skb->len), so we end up with a mismatch between skb->head + skb->tail and skb->data + skb->len. This is quite serious, and causes corruptions in the TCP stack, as the stack tries to coalesce packets, and relies on skb->tail being correct (that is, skb_tail_pointer must point to the first byte_after_ the data). Instead of re-adjusting the size in ath10k_sdio_mbox_rx_process_packet, this moves the code to ath10k_sdio_mbox_rx_packet, and also add a bounds check, as skb_put would crash the kernel if not enough space is available. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00007-QCARMSWP-1. Fixes: 8530b4e7b22bc3b ("ath10k: sdio: set skb len for all rx packets") Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-14ath10k: fix memory leakNavid Emamdoost1-0/+1
commit b8d17e7d93d2beb89e4f34c59996376b8b544792 upstream. In ath10k_usb_hif_tx_sg the allocated urb should be released if usb_submit_urb fails. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31ath10k: fix get invalid tx rate for Mesh metricMiaoqing Pan1-0/+2
[ Upstream commit 05a11003a56507023f18d3249a4d4d119c0a3e9c ] ath10k does not provide transmit rate info per MSDU in tx completion, mark that as -1 so mac80211 will ignore the rates. This fixes mac80211 update Mesh link metric with invalid transmit rate info. Tested HW: QCA9984 Tested FW: 10.4-3.9.0.2-00035 Signed-off-by: Hou Bao Hou <houbao@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31ath10k: fix offchannel tx failure when no ath10k_mac_tx_frm_has_freqBen Greear1-11/+11
[ Upstream commit cc6df017e55764ffef9819dd9554053182535ffd ] Offchannel management frames were failing: [18099.253732] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3780 [18102.293686] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3780 [18105.333653] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3780 [18108.373712] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3780 [18111.413687] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e36c0 [18114.453726] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3f00 [18117.493773] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e36c0 [18120.533631] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3f00 This bug appears to have been added between 4.0 (which works for us), and 4.4, which does not work. I think this is because the tx-offchannel logic gets in a loop when ath10k_mac_tx_frm_has_freq(ar) is false, so pkt is never actually sent to the firmware for transmit. This patch fixes the problem on 4.9 for me, and now HS20 clients can work again with my firmware. Antonio: tested with 10.4-3.5.3-00057 on QCA4019 and QCA9888 Signed-off-by: Ben Greear <greearb@candelatech.com> Tested-by: Antonio Quartulli <antonio.quartulli@kaiwoo.ai> [kvalo@codeaurora.org: improve commit log, remove unneeded parenthesis] Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17ath10k: fix fw crash by moving chip reset after napi disabledMiaoqing Pan1-4/+5
[ Upstream commit 08d80e4cd27ba19f9bee9e5f788f9a9fc440a22f ] On SMP platform, when continuously running wifi up/down, the napi poll can be scheduled during chip reset, which will call ath10k_pci_has_fw_crashed() to check the fw status. But in the reset period, the value from FW_INDICATOR_ADDRESS register will return 0xdeadbeef, which also be treated as fw crash. Fix the issue by moving chip reset after napi disabled. ath10k_pci 0000:01:00.0: firmware crashed! (guid 73b30611-5b1e-4bdd-90b4-64c81eb947b6) ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1 ath10k_pci 0000:01:00.0: failed to get memcpy hi address for firmware address 4: -16 ath10k_pci 0000:01:00.0: failed to read firmware dump area: -16 ath10k_pci 0000:01:00.0: Copy Engine register dump: ath10k_pci 0000:01:00.0: [00]: 0x0004a000 0 0 0 0 ath10k_pci 0000:01:00.0: [01]: 0x0004a400 0 0 0 0 ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0 0 0 ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0 0 0 0 ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0 0 0 0 ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0 0 0 0 ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0 0 0 0 ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1 0 1 0 ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0 0 0 ath10k_pci 0000:01:00.0: [09]: 0x0004c400 0 0 0 0 ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0 0 0 0 ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0 0 0 0 Tested HW: QCA9984,QCA9887,WCN3990 Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01ath10k: Fix a NULL-ptr-deref bug in ath10k_usb_alloc_urb_from_pipeHui Peng1-0/+8
commit bfd6e6e6c5d2ee43a3d9902b36e01fc7527ebb27 upstream. The `ar_usb` field of `ath10k_usb_pipe_usb_pipe` objects are initialized to point to the containing `ath10k_usb` object according to endpoint descriptors read from the device side, as shown below in `ath10k_usb_setup_pipe_resources`: for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; // get the address from endpoint descriptor pipe_num = ath10k_usb_get_logical_pipe_num(ar_usb, endpoint->bEndpointAddress, &urbcount); ...... // select the pipe object pipe = &ar_usb->pipes[pipe_num]; // initialize the ar_usb field pipe->ar_usb = ar_usb; } The driver assumes that the addresses reported in endpoint descriptors from device side to be complete. If a device is malicious and does not report complete addresses, it may trigger NULL-ptr-deref `ath10k_usb_alloc_urb_from_pipe` and `ath10k_usb_free_urb_to_pipe`. This patch fixes the bug by preventing potential NULL-ptr-deref. Signed-off-by: Hui Peng <benquike@gmail.com> Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [groeck: Add driver tag to subject, fix build warning] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01ath10k: allocate small size dma memory in ath10k_pci_diag_write_memCarl Huang1-12/+11
[ Upstream commit 0738b4998c6d1caf9ca2447b946709a7278c70f1 ] ath10k_pci_diag_write_mem may allocate big size of the dma memory based on the parameter nbytes. Take firmware diag download as example, the biggest size is about 500K. In some systems, the allocation is likely to fail because it can't acquire such a large contiguous dma memory. The fix is to allocate a small size dma memory. In the loop, driver copies the data to the allocated dma memory and writes to the destination until all the data is written. Tested with QCA6174 PCI with firmware-6.bin_WLAN.RM.4.4.1-00119-QCARMSWP-1, this also affects QCA9377 PCI. Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chomium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-24ath10k: fix vdev-start timeout on errorBen Greear4-5/+25
[ Upstream commit 833fd34d743c728afe6d127ef7bee67e7d9199a8 ] The vdev-start-response message should cause the completion to fire, even in the error case. Otherwise, the user still gets no useful information and everything is blocked until the timeout period. Add some warning text to print out the invalid status code to aid debugging, and propagate failure code. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-20ath10k: wmi: disable softirq's while calling ieee80211_rxErik Stromdahl1-1/+2
[ Upstream commit 37f62c0d5822f631b786b29a1b1069ab714d1a28 ] This is done in order not to trig the below warning in ieee80211_rx_napi: WARN_ON_ONCE(softirq_count() == 0); ieee80211_rx_napi requires that softirq's are disabled during execution. The High latency bus drivers (SDIO and USB) sometimes call the wmi ep_rx_complete callback from non softirq context, resulting in a trigger of the above warning. Calling ieee80211_rx_ni with softirq's already disabled (e.g., from softirq context) should be safe as the local_bh_disable and local_bh_enable functions (called from ieee80211_rx_ni) are fully reentrant. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-20ath10k: limit available channels via DT ieee80211-freq-limitSven Eckelmann1-0/+2
[ Upstream commit 34d5629d2ca89d847b7040762b87964c696c14da ] Tri-band devices (1x 2.4GHz + 2x 5GHz) often incorporate special filters in the RX and TX path. These filtered channel can in theory still be used by the hardware but the signal strength is reduced so much that it makes no sense. There is already a DT property to limit the available channels but ath10k has to manually call this functionality to limit the currrently set wiphy channels further. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-20ath10k: fix kernel panic by moving pci flush after napi_disableTamizh chelvam2-3/+3
[ Upstream commit bd1d395070cca4f42a93e520b0597274789274a4 ] When continuously running wifi up/down sequence, the napi poll can be scheduled after the CE buffers being freed by ath10k_pci_flush Steps: In a certain condition, during wifi down below scenario might occur. ath10k_stop->ath10k_hif_stop->napi_schedule->ath10k_pci_flush->napi_poll(napi_synchronize). In the above scenario, CE buffer entries will be freed up and become NULL in ath10k_pci_flush. And the napi_poll has been invoked after the flush process and it will try to get the skb from the CE buffer entry and perform some action on that. Since the CE buffer already cleaned by pci flush this action will create NULL pointer dereference and trigger below kernel panic. Unable to handle kernel NULL pointer dereference at virtual address 0000005c PC is at ath10k_pci_htt_rx_cb+0x64/0x3ec [ath10k_pci] ath10k_pci_htt_rx_cb [ath10k_pci] ath10k_ce_per_engine_service+0x74/0xc4 [ath10k_pci] ath10k_ce_per_engine_service [ath10k_pci] ath10k_ce_per_engine_service_any+0x74/0x80 [ath10k_pci] ath10k_ce_per_engine_service_any [ath10k_pci] ath10k_pci_napi_poll+0x48/0xec [ath10k_pci] ath10k_pci_napi_poll [ath10k_pci] net_rx_action+0xac/0x160 net_rx_action __do_softirq+0xdc/0x208 __do_softirq irq_exit+0x84/0xe0 irq_exit __handle_domain_irq+0x80/0xa0 __handle_domain_irq gic_handle_irq+0x38/0x5c gic_handle_irq __irq_usr+0x44/0x60 Tested on QCA4019 and firmware version 10.4.3.2.1.1-00010 Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-04ath10k: Change the warning message stringFabio Estevam1-1/+1
commit 265df32eae5845212ad9f55f5ae6b6dcb68b187b upstream. The "WARNING" string confuses syzbot, which thinks it found a crash [1]. Change the string to avoid such problem. [1] https://lkml.org/lkml/2019/5/9/243 Reported-by: syzbot+c1b25598aa60dcd47e78@syzkaller.appspotmail.com Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-31ath10k: destroy sdio workqueue while remove sdio moduleWen Gong1-0/+3
[ Upstream commit 3ed39f8e747a7aafeec07bb244f2c3a1bdca5730 ] The workqueue need to flush and destory while remove sdio module, otherwise it will have thread which is not destory after remove sdio modules. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00007-QCARMSWP-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-31ath10k: fix PCIE device wake up failedMiaoqing Pan1-1/+1
[ Upstream commit 011d4111c8c602ea829fa4917af1818eb0500a90 ] Observed PCIE device wake up failed after ~120 iterations of soft-reboot test. The error message is "ath10k_pci 0000:01:00.0: failed to wake up device : -110" The call trace as below: ath10k_pci_probe -> ath10k_pci_force_wake -> ath10k_pci_wake_wait -> ath10k_pci_is_awake Once trigger the device to wake up, we will continuously check the RTC state until it returns RTC_STATE_V_ON or timeout. But for QCA99x0 chips, we use wrong value for RTC_STATE_V_ON. Occasionally, we get 0x7 on the fist read, we thought as a failure case, but actually is the right value, also verified with the spec. So fix the issue by changing RTC_STATE_V_ON from 0x5 to 0x7, passed ~2000 iterations. Tested HW: QCA9984 Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-31ath10k: add missing error handlingClaire Chang1-0/+4
[ Upstream commit 4b553f3ca4cbde67399aa3a756c37eb92145b8a1 ] In function ath10k_sdio_mbox_rx_alloc() [sdio.c], ath10k_sdio_mbox_alloc_rx_pkt() is called without handling the error cases. This will make the driver think the allocation for skb is successful and try to access the skb. If we enable failslab, system will easily crash with NULL pointer dereferencing. Call trace of CONFIG_FAILSLAB: ath10k_sdio_irq_handler+0x570/0xa88 [ath10k_sdio] process_sdio_pending_irqs+0x4c/0x174 sdio_run_irqs+0x3c/0x64 sdio_irq_work+0x1c/0x28 Fixes: d96db25d2025 ("ath10k: add initial SDIO support") Signed-off-by: Claire Chang <tientzu@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-31ath10k: Do not send probe response template for meshSurabhi Vishnoi1-0/+4
[ Upstream commit 97354f2c432788e3163134df6bb144f4b6289d87 ] Currently mac80211 do not support probe response template for mesh point. When WMI_SERVICE_BEACON_OFFLOAD is enabled, host driver tries to configure probe response template for mesh, but it fails because the interface type is not NL80211_IFTYPE_AP but NL80211_IFTYPE_MESH_POINT. To avoid this failure, skip sending probe response template to firmware for mesh point. Tested HW: WCN3990/QCA6174/QCA9984 Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-27ath10k: avoid possible string overflowArnd Bergmann1-1/+1
commit 6707ba0105a2d350710bc0a537a98f49eb4b895d upstream. The way that 'strncat' is used here raised a warning in gcc-8: drivers/net/wireless/ath/ath10k/wmi.c: In function 'ath10k_wmi_tpc_stats_final_disp_tables': drivers/net/wireless/ath/ath10k/wmi.c:4649:4: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] Effectively, this is simply a strcat() but the use of strncat() suggests some form of overflow check. Regardless of whether this might actually overflow, using strlcat() instead of strncat() avoids the warning and makes the code more robust. Fixes: bc64d05220f3 ("ath10k: debugfs support to get final TPC stats for 10.4 variants") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13ath10k: schedule hardware restart if WMI command times outMartin Willi1-0/+6
[ Upstream commit a9911937e7d332761e8c4fcbc7ba0426bdc3956f ] When running in AP mode, ath10k sometimes suffers from TX credit starvation. The issue is hard to reproduce and shows up once in a few days, but has been repeatedly seen with QCA9882 and a large range of firmwares, including 10.2.4.70.67. Once the module is in this state, TX credits are never replenished, which results in "SWBA overrun" errors, as no beacons can be sent. Even worse, WMI commands run in a timeout while holding the conf mutex for three seconds each, making any further operations slow and the whole system unresponsive. The firmware/driver never recovers from that state automatically, and triggering TX flush or warm restarts won't work over WMI. So issue a hardware restart if a WMI command times out due to missing TX credits. This implies a connectivity outage of about 1.4s in AP mode, but brings back the interface and the whole system to a usable state. WMI command timeouts have not been seen in absent of this specific issue, so taking such drastic actions seems legitimate. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13ath10k: fix scan crash due to incorrect length calculationZhi Chen1-4/+4
commit c8291988806407e02a01b4b15b4504eafbcc04e0 upstream. Length of WMI scan message was not calculated correctly. The allocated buffer was smaller than what we expected. So WMI message corrupted skb_info, which is at the end of skb->data. This fix takes TLV header into account even if the element is zero-length. Crash log: [49.629986] Unhandled kernel unaligned access[#1]: [49.634932] CPU: 0 PID: 1176 Comm: logd Not tainted 4.4.60 #180 [49.641040] task: 83051460 ti: 8329c000 task.ti: 8329c000 [49.646608] $ 0 : 00000000 00000001 80984a80 00000000 [49.652038] $ 4 : 45259e89 8046d484 8046df30 8024ba70 [49.657468] $ 8 : 00000000 804cc4c0 00000001 20306320 [49.662898] $12 : 33322037 000110f2 00000000 31203930 [49.668327] $16 : 82792b40 80984a80 00000001 804207fc [49.673757] $20 : 00000000 0000012c 00000040 80470000 [49.679186] $24 : 00000000 8024af7c [49.684617] $28 : 8329c000 8329db88 00000001 802c58d0 [49.690046] Hi : 00000000 [49.693022] Lo : 453c0000 [49.696013] epc : 800efae4 put_page+0x0/0x58 [49.700615] ra : 802c58d0 skb_release_data+0x148/0x1d4 [49.706184] Status: 1000fc03 KERNEL EXL IE [49.710531] Cause : 00800010 (ExcCode 04) [49.714669] BadVA : 45259e89 [49.717644] PrId : 00019374 (MIPS 24Kc) Signed-off-by: Zhi Chen <zhichen@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Cc: Brian Norris <briannorris@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13ath10k: fix kernel panic issue during pci probeYu Wang1-2/+10
commit 50e79e25250bf928369996277e85b00536b380c7 upstream. If device gone during chip reset, ar->normal_mode_fw.board is not initialized, but ath10k_debug_print_hwfw_info() will try to access its member, which will cause 'kernel NULL pointer' issue. This was found using a faulty device (pci link went down sometimes) in a random insmod/rmmod/other-op test. To fix it, check ar->normal_mode_fw.board before accessing the member. pci 0000:02:00.0: BAR 0: assigned [mem 0xf7400000-0xf75fffff 64bit] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002) ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 ath10k_pci 0000:02:00.0: failed to read device register, device is gone ath10k_pci 0000:02:00.0: failed to wait for target init: -5 ath10k_pci 0000:02:00.0: failed to warm reset: -5 ath10k_pci 0000:02:00.0: firmware crashed during chip reset ath10k_pci 0000:02:00.0: firmware crashed! (uuid 5d018951-b8e1-404a-8fde-923078b4423a) ath10k_pci 0000:02:00.0: (null) target 0x00000000 chip_id 0x00340aff sub 0000:0000 ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1 ath10k_pci 0000:02:00.0: firmware ver api 0 features crc32 00000000 ... BUG: unable to handle kernel NULL pointer dereference at 00000004 ... Call Trace: [<fb4e7882>] ath10k_print_driver_info+0x12/0x20 [ath10k_core] [<fb62b7dd>] ath10k_pci_fw_crashed_dump+0x6d/0x4d0 [ath10k_pci] [<fb629f07>] ? ath10k_pci_sleep.part.19+0x57/0xc0 [ath10k_pci] [<fb62c8ee>] ath10k_pci_hif_power_up+0x14e/0x1b0 [ath10k_pci] [<c10477fb>] ? do_page_fault+0xb/0x10 [<fb4eb934>] ath10k_core_register_work+0x24/0x840 [ath10k_core] [<c18a00d8>] ? netlbl_unlhsh_remove+0x178/0x410 [<c10477f0>] ? __do_page_fault+0x480/0x480 [<c1068e44>] process_one_work+0x114/0x3e0 [<c1069d07>] worker_thread+0x37/0x4a0 [<c106e294>] kthread+0xa4/0xc0 [<c1069cd0>] ? create_worker+0x180/0x180 [<c106e1f0>] ? kthread_park+0x50/0x50 [<c18ab4f7>] ret_from_fork+0x1b/0x28 Code: 78 80 b8 50 09 00 00 00 75 5d 8d 75 94 c7 44 24 08 aa d7 52 fb c7 44 24 04 64 00 00 00 89 34 24 e8 82 52 e2 c5 8b 83 dc 08 00 00 <8b> 50 04 8b 08 31 c0 e8 20 57 e3 c5 89 44 24 10 8b 83 58 09 00 EIP: [<fb4e7754>]- ath10k_debug_print_board_info+0x34/0xb0 [ath10k_core] SS:ESP 0068:f4921d90 CR2: 0000000000000004 Signed-off-by: Yu Wang <yyuwang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [AmitP: Minor rebasing for 4.14.y and 4.9.y] Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13ath10k: fix use-after-free in ath10k_wmi_cmd_send_nowaitCarl Huang2-9/+5
commit 9ef0f58ed7b4a55da4a64641d538e0d9e46579ac upstream. The skb may be freed in tx completion context before trace_ath10k_wmi_cmd is called. This can be easily captured when KASAN(Kernel Address Sanitizer) is enabled. The fix is to move trace_ath10k_wmi_cmd before the send operation. As the ret has no meaning in trace_ath10k_wmi_cmd then, so remove this parameter too. Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Tested-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-04ath10k: transmit queued frames after processing rx packetsNiklas Cassel2-0/+4
[ Upstream commit 3f04950f32d5d592ab4fcaecac2178558a6f7437 ] When running iperf on ath10k SDIO, TX can stop working: iperf -c 192.168.1.1 -i 1 -t 20 -w 10K [ 3] 0.0- 1.0 sec 2.00 MBytes 16.8 Mbits/sec [ 3] 1.0- 2.0 sec 3.12 MBytes 26.2 Mbits/sec [ 3] 2.0- 3.0 sec 3.25 MBytes 27.3 Mbits/sec [ 3] 3.0- 4.0 sec 655 KBytes 5.36 Mbits/sec [ 3] 4.0- 5.0 sec 0.00 Bytes 0.00 bits/sec [ 3] 5.0- 6.0 sec 0.00 Bytes 0.00 bits/sec [ 3] 6.0- 7.0 sec 0.00 Bytes 0.00 bits/sec [ 3] 7.0- 8.0 sec 0.00 Bytes 0.00 bits/sec [ 3] 8.0- 9.0 sec 0.00 Bytes 0.00 bits/sec [ 3] 9.0-10.0 sec 0.00 Bytes 0.00 bits/sec [ 3] 0.0-10.3 sec 9.01 MBytes 7.32 Mbits/sec There are frames in the ieee80211_txq and there are frames that have been removed from from this queue, but haven't yet been sent on the wire (num_pending_tx). When num_pending_tx reaches max_num_pending_tx, we will stop the queues by calling ieee80211_stop_queues(). As frames that have previously been sent for transmission (num_pending_tx) are completed, we will decrease num_pending_tx and wake the queues by calling ieee80211_wake_queue(). ieee80211_wake_queue() does not call wake_tx_queue, so we might still have frames in the queue at this point. While the queues were stopped, the socket buffer might have filled up, and in order for user space to write more, we need to free the frames in the queue, since they are accounted to the socket. In order to free them, we first need to transmit them. This problem cannot be reproduced on low-latency devices, e.g. pci, since they call ath10k_mac_tx_push_pending() from ath10k_htt_txrx_compl_task(). ath10k_htt_txrx_compl_task() is not called on high-latency devices. Fix the problem by calling ath10k_mac_tx_push_pending(), after processing rx packets, just like for low-latency devices, also in the SDIO case. Since we are calling ath10k_mac_tx_push_pending() directly, we also need to export it. Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-04ath10k: protect ath10k_htt_rx_ring_free with rx_ring.lockBen Greear1-1/+4
[ Upstream commit 168f75f11fe68455e0d058a818ebccfc329d8685 ] While debugging driver crashes related to a buggy firmware crashing under load, I noticed that ath10k_htt_rx_ring_free could be called without being under lock. I'm not sure if this is the root cause of the crash or not, but it seems prudent to protect it. Originally tested on 4.16+ kernel with ath10k-ct 10.4 firmware running on 9984 NIC. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-04ath10k: sdio: set skb len for all rx packetsAlagu Sankar1-0/+1
[ Upstream commit 8530b4e7b22bc3bd8240579f3844c73947cd5f71 ] Without this, packets larger than 1500 will silently be dropped. Easily reproduced by sending a ping packet with a size larger than 1500. Co-Developed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Alagu Sankar <alagusankar@silex-india.com> Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-04ath10k: sdio: use same endpoint id for all packets in a bundleAlagu Sankar1-1/+4
[ Upstream commit 679e1f07c86221b7183dd69df7068fd42d0041f6 ] All packets in a bundle should use the same endpoint id as the first lookahead. This matches how things are done is ath6kl, however, this patch can theoretically handle several bundles in ath10k_sdio_mbox_rx_process_packets(). Without this patch we get lots of errors about invalid endpoint id: ath10k_sdio mmc2:0001:1: invalid endpoint in look-ahead: 224 ath10k_sdio mmc2:0001:1: failed to get pending recv messages: -12 ath10k_sdio mmc2:0001:1: failed to process pending SDIO interrupts: -12 Co-Developed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Alagu Sankar <alagusankar@silex-india.com> Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19ath10k: disable bundle mgmt tx completion event supportSurabhi Vishnoi2-0/+10
[ Upstream commit 673bc519c55843c68c3aecff71a4101e79d28d2b ] The tx completion of multiple mgmt frames can be bundled in a single event and sent by the firmware to host, if this capability is not disabled explicitly by the host. If the host cannot handle the bundled mgmt tx completion, this capability support needs to be disabled in the wmi init cmd, sent to the firmware. Add the host capability indication flag in the wmi ready command, to let firmware know the features supported by the host driver. This field is ignored if it is not supported by firmware. Set the host capability indication flag(i.e. host_capab) to zero, for disabling the support of bundle mgmt tx completion. This will indicate the firmware to send completion event for every mgmt tx completion, instead of bundling them together and sending in a single event. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19ath10k: prevent active scans on potential unusable channelsSven Eckelmann1-0/+7
[ Upstream commit 3f259111583801013cb605bb4414aa529adccf1c ] The QCA4019 hw1.0 firmware 10.4-3.2.1-00050 and 10.4-3.5.3-00053 (and most likely all other) seem to ignore the WMI_CHAN_FLAG_DFS flag during the scan. This results in transmission (probe requests) on channels which are not "available" for transmissions. Since the firmware is closed source and nothing can be done from our side to fix the problem in it, the driver has to work around this problem. The WMI_CHAN_FLAG_PASSIVE seems to be interpreted by the firmware to not scan actively on a channel unless an AP was detected on it. Simple probe requests will then be transmitted by the STA on the channel. ath10k must therefore also use this flag when it queues a radar channel for scanning. This should reduce the chance of an active scan when the channel might be "unusable" for transmissions. Fixes: e8a50f8ba44b ("ath10k: introduce DFS implementation") Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24ath10k: update the phymode along with bandwidth change requestRyan Hsu2-2/+15
[ Upstream commit 9191fc2a431bade3dedc9ad17759495a9f82f41b ] In the case of Station connects to AP with narrower bandwidth at beginning. And later the AP changes the bandwidth to winder bandwidth, the AP will beacon with wider bandwidth IE, eg VHT20->VHT40->VHT80 or VHT40->VHT80. Since the supported BANDWIDTH will be limited by the PHYMODE, so while Station receives the bandwidth change request, it will also need to reconfigure the PHYMODE setting to firmware instead of just configuring the BANDWIDTH info, otherwise it'll trigger a firmware crash with non-support bandwidth. The issue was observed in WLAN.RM.4.4.1-00051-QCARMSWP-1, QCA6174 with below scenario: AP xxx changed bandwidth, new config is 5200 MHz, width 2 (5190/0 MHz) disconnect from AP xxx for new auth to yyy RX ReassocResp from xxx (capab=0x1111 status=0 aid=102) associated .... AP xxx changed bandwidth, new config is 5200 MHz, width 2 (5190/0 MHz) AP xxx changed bandwidth, new config is 5200 MHz, width 3 (5210/0 MHz) .... firmware register dump: [00]: 0x05030000 0x000015B3 0x00987291 0x00955B31 [04]: 0x00987291 0x00060730 0x00000004 0x00000001 [08]: 0x004089F0 0x00955A00 0x000A0B00 0x00400000 [12]: 0x00000009 0x00000000 0x00952CD0 0x00952CE6 [16]: 0x00952CC4 0x0098E25F 0x00000000 0x0091080D [20]: 0x40987291 0x0040E7A8 0x00000000 0x0041EE3C [24]: 0x809ABF05 0x0040E808 0x00000000 0xC0987291 [28]: 0x809A650C 0x0040E948 0x0041FE40 0x004345C4 [32]: 0x809A5C63 0x0040E988 0x0040E9AC 0x0042D1A8 [36]: 0x8091D252 0x0040E9A8 0x00000002 0x00000001 [40]: 0x809FDA9D 0x0040EA58 0x0043D554 0x0042D554 [44]: 0x809F8B22 0x0040EA78 0x0043D554 0x00000001 [48]: 0x80911210 0x0040EAC8 0x00000010 0x004041D0 [52]: 0x80911154 0x0040EB28 0x00400000 0x00000000 [56]: 0x8091122D 0x0040EB48 0x00000000 0x00400600 Reported-by: Rouven Czerwinski <rouven@czerwinskis.de> Tested-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk)Karthikeyan Periyasamy1-0/+10
[ Upstream commit 8b2d93dd22615cb7f3046a5a2083a6f8bb8052ed ] When attempt to run worker (ath10k_sta_rc_update_wk) after the station object (ieee80211_sta) delete will trigger the kernel panic. This problem arise in AP + Mesh configuration, Where the current node AP VAP and neighbor node mesh VAP MAC address are same. When the current mesh node try to establish the mesh link with neighbor node, driver peer creation for the neighbor mesh node fails due to duplication MAC address. Already the AP VAP created with same MAC address. It is caused by the following scenario steps. Steps: 1. In above condition, ath10k driver sta_state callback (ath10k_sta_state) fails to do the state change for a station from IEEE80211_STA_NOTEXIST to IEEE80211_STA_NONE due to peer creation fails. Sta_state callback is called from ieee80211_add_station() to handle the new station (neighbor mesh node) request from the wpa_supplicant. 2. Concurrently ath10k receive the sta_rc_update callback notification from the mesh_neighbour_update() to handle the beacon frames of the above neighbor mesh node. since its atomic callback, ath10k driver queue the work (ath10k_sta_rc_update_wk) to handle rc update. 3. Due to driver sta_state callback fails (step 1), mac80211 free the station object. 4. When the worker (ath10k_sta_rc_update_wk) scheduled to run, it will access the station object which is already deleted. so it will trigger kernel panic. Added the peer exist check in sta_rc_update callback before queue the work. Kernel Panic log: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0204000 [00000000] *pgd=00000000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM CPU: 1 PID: 1833 Comm: kworker/u4:2 Not tainted 3.14.77 #1 task: dcef0000 ti: d72b6000 task.ti: d72b6000 PC is at pwq_activate_delayed_work+0x10/0x40 LR is at pwq_activate_delayed_work+0xc/0x40 pc : [<c023f988>] lr : [<c023f984>] psr: 40000193 sp : d72b7f18 ip : 0000007a fp : d72b6000 r10: 00000000 r9 : dd404414 r8 : d8c31998 r7 : d72b6038 r6 : 00000004 r5 : d4907ec8 r4 : dcee1300 r3 : ffffffe0 r2 : 00000000 r1 : 00000001 r0 : 00000000 Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5787d Table: 595bc06a DAC: 00000015 ... Process kworker/u4:2 (pid: 1833, stack limit = 0xd72b6238) Stack: (0xd72b7f18 to 0xd72b8000) 7f00: 00000001 dcee1300 7f20: 00000001 c02410dc d8c31980 dd404400 dd404400 c0242790 d8c31980 00000089 7f40: 00000000 d93e1340 00000000 d8c31980 c0242568 00000000 00000000 00000000 7f60: 00000000 c02474dc 00000000 00000000 000000f8 d8c31980 00000000 00000000 7f80: d72b7f80 d72b7f80 00000000 00000000 d72b7f90 d72b7f90 d72b7fac d93e1340 7fa0: c0247404 00000000 00000000 c0208d20 00000000 00000000 00000000 00000000 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c023f988>] (pwq_activate_delayed_work) from [<c02410dc>] (pwq_dec_nr_in_flight+0x58/0xc4) [<c02410dc>] (pwq_dec_nr_in_flight) from [<c0242790>] (worker_thread+0x228/0x360) [<c0242790>] (worker_thread) from [<c02474dc>] (kthread+0xd8/0xec) [<c02474dc>] (kthread) from [<c0208d20>] (ret_from_fork+0x14/0x34) Code: e92d4038 e1a05000 ebffffbc[69210.619376] SMP: failed to stop secondary CPUs Rebooting in 3 seconds.. Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 16:16:28 +0300