summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath10k/wmi.h
AgeCommit message (Collapse)AuthorFilesLines
2019-11-24ath10k: fix vdev-start timeout on errorBen Greear1-1/+7
[ Upstream commit 833fd34d743c728afe6d127ef7bee67e7d9199a8 ] The vdev-start-response message should cause the completion to fire, even in the error case. Otherwise, the user still gets no useful information and everything is blocked until the timeout period. Add some warning text to print out the invalid status code to aid debugging, and propagate failure code. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-08-24ath10k: update the phymode along with bandwidth change requestRyan Hsu1-0/+1
[ Upstream commit 9191fc2a431bade3dedc9ad17759495a9f82f41b ] In the case of Station connects to AP with narrower bandwidth at beginning. And later the AP changes the bandwidth to winder bandwidth, the AP will beacon with wider bandwidth IE, eg VHT20->VHT40->VHT80 or VHT40->VHT80. Since the supported BANDWIDTH will be limited by the PHYMODE, so while Station receives the bandwidth change request, it will also need to reconfigure the PHYMODE setting to firmware instead of just configuring the BANDWIDTH info, otherwise it'll trigger a firmware crash with non-support bandwidth. The issue was observed in WLAN.RM.4.4.1-00051-QCARMSWP-1, QCA6174 with below scenario: AP xxx changed bandwidth, new config is 5200 MHz, width 2 (5190/0 MHz) disconnect from AP xxx for new auth to yyy RX ReassocResp from xxx (capab=0x1111 status=0 aid=102) associated .... AP xxx changed bandwidth, new config is 5200 MHz, width 2 (5190/0 MHz) AP xxx changed bandwidth, new config is 5200 MHz, width 3 (5210/0 MHz) .... firmware register dump: [00]: 0x05030000 0x000015B3 0x00987291 0x00955B31 [04]: 0x00987291 0x00060730 0x00000004 0x00000001 [08]: 0x004089F0 0x00955A00 0x000A0B00 0x00400000 [12]: 0x00000009 0x00000000 0x00952CD0 0x00952CE6 [16]: 0x00952CC4 0x0098E25F 0x00000000 0x0091080D [20]: 0x40987291 0x0040E7A8 0x00000000 0x0041EE3C [24]: 0x809ABF05 0x0040E808 0x00000000 0xC0987291 [28]: 0x809A650C 0x0040E948 0x0041FE40 0x004345C4 [32]: 0x809A5C63 0x0040E988 0x0040E9AC 0x0042D1A8 [36]: 0x8091D252 0x0040E9A8 0x00000002 0x00000001 [40]: 0x809FDA9D 0x0040EA58 0x0043D554 0x0042D554 [44]: 0x809F8B22 0x0040EA78 0x0043D554 0x00000001 [48]: 0x80911210 0x0040EAC8 0x00000010 0x004041D0 [52]: 0x80911154 0x0040EB28 0x00400000 0x00000000 [56]: 0x8091122D 0x0040EB48 0x00000000 0x00400600 Reported-by: Rouven Czerwinski <rouven@czerwinskis.de> Tested-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19ath10k: fix invalid STS_CAP_OFFSET_MASKBen Greear1-1/+2
[ Upstream commit 8cec57f5277ef0e354e37a0bf909dc71bc1f865b ] The 10.4 firmware defines this as a 3-bit field, as does the mac80211 stack. The 4th bit is defined as CONF_IMPLICIT_BF at least in the firmware header I have seen. This patch fixes the ath10k wmi header to match the firmware. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-03ath10k: push peer type to target for TDLS peersManikanta Pubbisetty1-0/+1
WMI interface for all the firmwares(except QCA6174) does not include the type of peer(default/bss/tdls) requested during peer creation, therefore target creates a default peer. TDLS implementation on 10.4 firmware requires host to configure the peer type(tdls) for TDLS peers. This patch adds peer type parameter to the existing WMI interface for peer creation to accommodate this requirement. Tested this change on QCA9888(10.4-3.5.1-00018) and QCA988x(10.2.4.70.9-2) with ping tests for AP/STA modes. Signed-off-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-03ath10k: add tdls support for 10.4 firmwaresManikanta Pubbisetty1-0/+257
This patch adds the support of TDLS feature for 10.4 firmware versions. A new WMI service is added to advertise the support of TDLS for 10.4 firmwares. Signed-off-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-03ath10k: extend wmi service map to accommodate new servicesManikanta Pubbisetty1-1/+12
Though there is room to accommodate 512 services in wmi service ready event, target uses only first 4-bits of each 32-bit word for advertising wmi services thereby limiting max wmi services to 64. TDLS implementation for 10.4 firmwares introduces new wmi services by making use of remaining unused bits of each 32-bit word, therefore the wmi service mapping in host needs to be extended. This patch adds the logic to extend the wmi SVCMAP to accommodate new wmi services. Signed-off-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-21ath10k: configure rxnss_override for QCA9984Ben Greear1-0/+3
QCA9984 hardware can do 4x4 at 80Mhz, but only 2x2 at 160Mhz. First, report this to user-space by setting the max-tx-speed and max-rx-speed vht capabilities. Second, if the peer rx-speed is configured, and if we are in 160 or 80+80 mode, and the peer rx-speed matches the max speed for 2x2 or 1x1 at 160Mhz (long guard interval), then use that info to set the peer_bw_rxnss_override appropriately. Without this, a 9984 firmware will not use 2x2 ratesets when transmitting to peer (it will be stuck at 1x1), because the firmware would not have configured the rxnss_override. Signed-off-by: Ben Greear <greearb@candelatech.com> [sven.eckelmann@openmesh.com: rebase, cleanup, drop 160Mhz workaround cleanup] Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [kvalo@qca.qualcomm.com: use hw_params, rename the title] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-05ath10k: clean header files from bad block commentsMarcin Rokicki1-10/+20
Fix output from checkpatch.pl like: Block comments use a trailing */ on a separate line Signed-off-by: Marcin Rokicki <marcin.rokicki@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-20ath10k: fix typo in wmi header fileMohammed Shafi Shajakhan1-1/+1
Fix typo (spelling mistake) in wmi.h Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-16ath10k: update available channel list for 5G radioTamizh chelvam1-0/+2
If a 5 GHz radio is calibrated for operation in both the low band (channels 36 to 64) and high band(channels 100 to 169), hardware allows operations in all the listed channels. However, if the chip has been calibrated only for the low/high band and a high/low band channel is configured, due to lack of calibration there will be potentially invalid signal on those non calibrated channels. To avoid this problem this patch sets IEEE80211_CHAN_DISABLED flag for those non calibrated channels by using low_5ghz_chan and high_5ghz_chan values which we get from target through wmi service ready event. Driver initialized flags are getting re initialized in handle_channel in cfg80211. So calling the function to disable the non supported channel from reg_notifier(). Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: fix commentAmadeusz Sławiński1-1/+1
I wanted to take a look and it's apparently in other header Signed-off-by: Amadeusz Sławiński <amadeusz.slawinski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath10k: add debugfs support to get per peer tids log via tracingMaharaja Kennadyrajan1-0/+1
This patch provides support to get per peer tids log. echo 1 > /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/ XX:XX/peer_debug_trigger These logs will be the part of FWLOGS which we collect the logs via tracing interface. Here we will get the peer tigd logs only once(not repeatedly) when we write 1 to the debugfs file. Signed-off-by: Maharaja Kennadyrajan <c_mkenna@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath10k: use names in function definition argumentsKalle Valo1-1/+1
Fixes new checkpatch warnings: drivers/net/wireless/ath/ath10k/htt.h:1823: function definition argument 'struct sk_buff *' should also have an identifier name drivers/net/wireless/ath/ath10k/wmi.h:6607: function definition argument 'struct wmi_start_scan_arg *' should also have an identifier name Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-13ath10k: add VHT160 supportSebastian Gottschall1-2/+25
This patch adds full VHT160 support for QCA9984 chipsets Tested on Netgear R7800. 80+80 is possible, but disabled so far since it seems to contain glitches like missing vht station flags (this may be firmware or mac80211 related). Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> [kvalo@qca.qualcomm.com: refactoring and fix few warnings] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23ath10k: add per peer htt tx stats support for 10.4Anilkumar Kolli1-1/+9
Per peer tx stats are part of 'HTT_10_4_T2H_MSG_TYPE_PEER_STATS' event, Firmware sends one HTT event for every four PPDUs. HTT payload has success pkts/bytes, failed pkts/bytes, retry pkts/bytes and rate info per ppdu. Peer stats are enabled through 'WMI_SERVICE_PEER_STATS', which are nowadays enabled by default. Parse peer stats and update the tx rate information per STA. tx rate, Peer stats are tested on QCA4019 with Firmware version 10.4-3.2.1-00028. Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23ath10k: remove set/get_tsf ieee80211_opsPedersen, Thomas1-1/+0
Neither of these did the right thing: - get_tsf just returned 0 - set_tsf assumed a simple offset was applied against get_tsf(), which works, except in the case of calculating TSF from rx_mactime (actual TSF). Just remove them for now. We can reimplement set_tsf in terms of TSF increment/decrement in the future if get_tsf is ever supported by FW. Signed-off-by: Thomas Pedersen <twp@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23ath10k: implement offset_tsf ieee80211_opPedersen, Thomas1-0/+7
Current set_tsf is implemented in terms of TSF_INCREMENT only. Instead support new WMI command TSF_DECREMENT and export these through offset_tsf. Advantage is we get more accurate TSF adjustments, and don't calculate wrong offset in case absolute TSF was calculated from rx_mactime (actual TSF). The new WMI command is available in firmware 10.4-3.2.1-00033 for QCA4019 chips. Old drivers on new firmware or vice versa shouldn't be a problem since get/set tsf logic was already broken. Signed-off-by: Thomas Pedersen <twp@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27ath10k: document cycle count related countersBen Greear1-4/+4
They are not necessarily named in an intuitive manner, so at least add some comments to help the next person. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27ath10k: spelling and miscellaneous neateningJoe Perches1-12/+12
Correct some trivial comment typos. Remove unnecessary parentheses in a long line. Signed-off-by: Joe Perches <joe@perches.com> [kvalo@qca.qualcomm.com: drop the change for return] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-02ath10k: Added support for extended dbglog module id for 10.4Maharaja Kennadyrajan1-0/+14
For 10.4 fw versions, dbglog module id has been extended from u32 to u64, hence this patch fixes the same in the ath10k driver side. This patch doesn't break the older 10.4 releases. The FW change is already present in the older FWs. Signed-off-by: Maharaja Kennadyrajan <c_mkenna@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-02ath10k: Add WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT wmi serviceTamizh chelvam1-0/+5
WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT service has missed in the commit 7e247a9e88dc ("ath10k: add dynamic tx mode switch config support for qca4019"). This patch adds the service to avoid mismatch between host and target. Fixes: 7e247a9e88dc ("ath10k: add dynamic tx mode switch config support for qca4019") Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-08-31ath10k: add wmi command barrier utilityMichal Kazior1-0/+1
This allows placing command barriers for explicit serializing and synchronizing state. Useful for future driver development. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-08-31ath10k: implement wmi echo eventMichal Kazior1-0/+4
Will be useful for implementing command barriers. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-07-08ath10k: fix 10.4 extended peer stats updateMohammed Shafi Shajakhan1-1/+13
10.4 'extended peer stats' will be not be appended with normal peer stats data and they shall be coming in separate chunks. Fix this by maintaining a separate linked list 'extender peer stats' for 10.4 and update rx_duration for per station statistics. Also parse through beacon filter (if enabled), to make sure we parse the extended peer stats properly. This issue was exposed when more than one client is connected and extended peer stats for 10.4 is enabled The order for the stats is as below S - standard peer stats, E- extended peer stats, B - beacon filter stats {S1, S2, S3..} -> {B1, B2, B3..}(if available) -> {E1, E2, E3..} Fixes: f9575793d44c ("ath10k: enable parsing per station rx duration for 10.4") Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-06-02ath10k: add pdev param support to enable/disable btcoexRajkumar Manoharan1-0/+4
10.4 firmware has support to enable or disable btcoex functionality without reloading firmware via wmi pdev param. Add provision to send pdev param command via existing btcoex knob. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06ath10k: handle pdev_chan_info wmi eventRajkumar Manoharan1-0/+11
Add handler to process bss channel information wmi event that will be received upon sending pdev_chan_info_request wmi command. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06ath10k: implement wmi_pdev_bss_chan_info_requestRajkumar Manoharan1-0/+10
Add WMI ops to send pdev_bss_chan_info_request command to target. This command will be used to retrieve updated cycle counters and noise floor value of current operating channel (bss channel). Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06ath10k: add pdev bss channel info wmi definitionsRajkumar Manoharan1-0/+4
Add WMI definitions for pdev bss channel information request and event. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26ath10k: add max_tx_power for QCA6174 WLAN.RM.2.0 firmwareAlan Liu1-0/+1
QCA6174 WLAN.RM.2.0 firmware uses max_tx_power instead of using max_reg_power to set transmission power. The tx power was about -50dbm, after applying this change, it become -32dbm. Signed-off-by: Alan Liu <alanliu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-19ath10k: add dynamic tx mode switch config support for qca4019Raja Mani1-0/+15
push-pull mode needs certain amount the host driver involvement for managing queues in the host memory and packet delivery to firmware. qca4019 wifi firmware has an option to stay in push mode for less number of active traffic flow and then switch to push-pull mode when the active traffic flow goes beyond the certain limit. The advantage of staying in push mode for less active traffic is, the host cpu consumption is reduced. qca4019 firmware supports this flexibility of the mode switch. It takes the host driver interest (LOW_PERF/HIGH_PERF) via WMI_EXT_RESOURCE_CFG_CMDID, LOW_PERF - fw would stay in push mode and switch to push-pull based on demand. HIGH_PERF - fw would stay in push-pull mode from the boot. To make this configuration generic, new WMI services WMI_SERVICE_TX_MODE_PUSH_ONLY, WMI_SERVICE_TX_MODE_PUSH_PULL, WMI_SERVICE_TX_MODE_DYNAMIC are introduced to take dynamic tx mode switch support availability in firmware. Based on WMI_SERVICE_TX_MODE_DYNAMIC, LOW_PERF or HIGHT_PERF is configured to the firmware. Signed-off-by: Raja Mani <rmani@qti.qualcomm.com> Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-14ath10k: fix checkpatch warnings related to spacesKalle Valo1-9/+9
Fix checkpatch warnings about use of spaces with operators: spaces preferred around that '*' (ctx:VxV) This has been recently added to checkpatch. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-12ath10k: update 10.4 WMI vdev parametersPeter Oh1-0/+6
Update 10.4 WMI vdev param to sync to current 10.4 firmware as of 2/23/2016. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-12ath10k: add a support of set_tsf on vdev interfacePeter Oh1-0/+2
10.2.4.70.24 firmware introduces new feature to set TSF via vdev parameter, hence implement relevant function. set_tsf function can be used to shift TBTT that will help avoid its clockdrift which happens when beacons are collided. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-12ath10k: Document alloc_frag_desc_for_data_pkt config option.Ben Greear1-1/+6
This will help anyone trying to use the ack-rssi reporting feature with the host-specified TX-rate option in 10.4 firmware. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-04ath10k: enable parsing per station rx duration for 10.4Mohammed Shafi Shajakhan1-0/+16
Rx duration support for per station is part of extended peer stats, enable provision to parse the same and provide backward compatibility based on the 'stats_id' event Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-04ath10k: introduce Extended Resource Config support for 10.4Raja Mani1-0/+31
Add API support for Extended Resource Configuration for 10.4. This is useful to enable new features like Peer Stats, LTEU etc if the firmware advertises support for the service. This is also done to provide backward compatibility with older firmware. Also for clarity send default host platform type as 'WMI_HOST_PLATFORM_HIGH_PERF', though this should not make any difference in functionality Signed-off-by: Raja Mani <rmani@qti.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-08ath10k: set MAC timestamp in management Rx framePeter Oh1-0/+7
Check and set Rx MAC timestamp when firmware indicates it. Firmware adds it in Rx beacon frame only at this moment. Driver and mac80211 may utilize it to detect such clockdrift or beacon collision and use the result for beacon collision avoidance. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-02-02ath10k: populate qca4019 fw specific wmi init paramsRaja Mani1-1/+0
Some of the parameter like tx/rx chain mask, number of htt tx desc, qcache active peer count, etc goes via wmi init cmd to qca4019 firmware are different. To make use of 10.4 gen_init function for qca4019, change wmi service ready handler and 10.4 wmi init functions to adapt qca4019 specific init values. Signed-off-by: Raja Mani <rmani@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-02-02ath10k: add abstraction layer for vdev subtypePeter Oh1-6/+36
Abstraction layer for vdev subtype is added to solve subtype mismatch and to give flexible compatibility among different firmware revisions. For instance, 10.2 and 10.4 firmware has different definition of their vdev subtypes for Mesh. 10.4 defined subtype 6 for 802.11s Mesh while 10.2 uses 5. Hence use the abstraction API to get right subtype to use. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-02-02ath10k: update 10.4 WMI service mapPeter Oh1-0/+11
Update 10.4 WMI service map to sync to the latest 10.4 firmware as of 1/20/2016. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-02-02ath10k: rename Mesh related service namesPeter Oh1-7/+9
WMI_10_4_SERVICE_MESH bit is for non IEEE802.11s Mesh. Hence rename it to WMI_10_4_SERVICE_MESH_NON_11S. Also add _11S as post-fix to each of WMI_SERVICE_MESH and WMI_VDEV_SUBTYPE_MESH specifying the service is for 11s Mesh. This will help users to distinguish 11s Mesh from non 11s Mesh. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-26ath10k: remove the p2p notice of absence info from 10.2.4 FW beacon infoYanbo Li1-0/+10
The p2p NOA never been supported at 10.2.4 FW, remove it to avoid SWBA event parse error for multi beacon interval case. Signed-off-by: Yanbo Li <yanbol@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-26ath10k: fix naming Peer stats rssi_changed field in 10.2.4Mohammed Shafi Shajakhan1-1/+1
Fix naming of peer stats rssi_changed field in 10.2.4 to make it more readable. As of now this field is not used, but necessary to pull in fw_stats with appropriate length. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-21ath10k: add support for parsing per STA rx_duration for 10.2.4Mohammed Shafi Shajakhan1-0/+12
Add support for parsing 'peer_rx_duration' as part of 10.2.4 peer_stats. Also register PEER_STATS service for parsing 'rx_duration' (and for any new fields to be added as part of peer_stats). Have checks for backward compatibility with older 10.2.4 firmware incase PEER_STATS service is not enabled Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-30ath10k: introduce new subtypes for proxy STA and MeshPeter Oh1-0/+2
QCA988X firmware starting from 10.2.4.70.12-2 supports new vdev subtypes for proxy STA and Mesh, hence add them to be used as needed. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-30ath10k: update WMI 10.x service mapPeter Oh1-0/+15
Update WMI 10.x service map to sync with firmware 10.2.4.70.12-2 released on 11/11/2015 which is the latest QCA988X firmware as of 11/18/2015. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-12ath10k: fix peer assoc complete WMI command for 10.4Vasanthakumar Thiagarajan1-0/+5
There is an extra 4-byte member when compared to WMI 10.2 added to assoc complete command in WMI 10.4. This new member is used for 160Mhz related configuration. This WMI command mismatch between host and firmware does not cause any real issues because this new member is not used in 10.4 firmwares so far (10.4.1.00030-1). This difference in WMI command interface brings in a new wmi_ops for 10.4 gen_peer_assoc(). No noticeable functionality differences with this change can be seen with the current 10.4 firmwares, but the WMI interface has to be fixed to work with future 10.4 firmwares which may be using this new member. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: add new pdev params defines to 10.4Vasanthakumar Thiagarajan1-0/+6
No functionality change, just sync to the latest pdev params that 10.4 firmware defines. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: add new WMI cmd/event defines for 10.4Vasanthakumar Thiagarajan1-0/+4
No real functionality change, add WMI command/event defines to be in sync with 10.4 firmware. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: add new service defines for 10.4Vasanthakumar Thiagarajan1-0/+10
No functional changes, adds new wmi service bits for 10.4 firmware to be sync with 10.4 firmware. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-17 04:37:52 +0300