summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath10k/wmi-tlv.h
AgeCommit message (Collapse)AuthorFilesLines
2019-09-12ath10k: fix channel info parsing for non tlv targetRakesh Pillai1-0/+16
The tlv targets such as WCN3990 send more data in the chan info event, which is not sent by the non tlv targets. There is a minimum size check in the wmi event for non-tlv targets and hence we cannot update the common channel info structure as it was done in commit 13104929d2ec ("ath10k: fill the channel survey results for WCN3990 correctly"). This broke channel survey results on 10.x firmware versions. If the common channel info structure is updated, the size check for chan info event for non-tlv targets will fail and return -EPROTO and we see the below error messages ath10k_pci 0000:01:00.0: failed to parse chan info event: -71 Add tlv specific channel info structure and restore the original size of the common channel info structure to mitigate this issue. Tested HW: WCN3990 QCA9887 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 10.2.4-1.0-00037 Fixes: 13104929d2ec ("ath10k: fill the channel survey results for WCN3990 correctly") Cc: stable@vger.kernel.org # 5.0 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25ath10k: Add peer delete response eventDundi Raviteja1-0/+2
Peer creation in firmware fails if last peer deletion is still in progress. The firmware sends a peer delete response event if it advertises the service WMI_SERVICE_SYNC_DELETE_CMDS. This peer delete response event is used to synchronize the peer deletion. Add peer delete response event and wait for the event after deleting every peer from host driver to synchronize with firmware. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by: Dundi Raviteja <dundi@codeaurora.org> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25ath10k: wait for vdev delete response from firmwareRakesh Pillai1-1/+5
When we add an interface immediately after removing the interface the vdev deletion in firmware might not have been completed. We need to synchronize the vdev creation with the firmware. Wait for vdev delete response from firmware when we remove an interface. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-07ath10k: Add wmi tlv service map for mesh 11sSurabhi Vishnoi1-0/+2
WCN3990 firmware advertises the service WMI_TLV_SERVICE_MESH_11S for mesh 11s. Map this wmi tlv service to enable mesh 11s for WCN3990. Tested HW: WCN3990 Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-07ath10k: Add wmi tlv vdev subtype for mesh in WCN3990Surabhi Vishnoi1-0/+10
There is a disparity in wmi and wmi tlv vdev subtype enum for WMI_VDEV_SUBTYPE_MESH_11S. Add different enum for wmi tlv vdev subtype to support vdev of subtype mesh 11s for WCN3990. Tested HW: WCN3990 Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28ath10k: Fill rx duration for each peer in fw_stats for WCN3990Surabhi Vishnoi1-0/+20
Currently, rx_duration for each peer is not getting populated in fw_stats debugfs entry for WCN3990. WCN3990 firmware sends rx duration for each peer as part of peer_extd_stats in WMI_UPDATE_STATS_EVENT. To enable peer_extd_stats, firmware expects host to send fw_stats_req_mask with flag WMI_TLV_PEER_STATS_EXTD set in WMI_REQUEST_STATS_CMD. Send fw_stats_req_mask with flag WMI_TLV_PEER_STATS_EXTD set in WMI_REQUEST_STATS_CMD and parse the peer_extd_stats in WMI_UPDATE_STATS_EVENT to populate the rx_duration of each peer in fw_stats debugfs entry. Currently the driver handles 32-bit rx_duration, but the rx_duration for WCN3990 can be upto 63 bit. The firmware sends rx_duration split into two 32-bit fields, with the upper 32-bits being valid only if its MSB is set. This change handles the 63-bit rx_duration obtained from WCN3990 and maintain the backward compatibility. To get the rx_duration of each connected peer : cat /sys/kernel/debug/ieee80211/phyX/ath10k/fw_stats Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26ath10k: add support for ack rssi value of management tx packetsAbhishek Ambure1-0/+25
In WCN3990, WMI_TLV_SERVICE_TX_DATA_MGMT_ACK_RSSI service Indicates that the firmware has the capability to send the RSSI value of the ACK for all data and management packets transmitted. If WMI_RSRC_CFG_FLAG_TX_ACK_RSSI is set in host capability then firmware sends RSSI value in "management" tx completion event. Host extracts ack rssi values of management packets from their tx completion event. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01617-QCAHLSWMTPLZ-1 Signed-off-by: Abhishek Ambure <aambure@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-20ath10k: switch to use SPDX license identifiersKalle Valo1-12/+1
Use SPDX identifiers everywhere in ath10k. Makefile was incorrectly marked in commit b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license"), fix that as well. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-11ath10k: disable interface pause wow config for integrated chipsetGovind Singh1-0/+7
wow pause iface config controls the PCI D0/D3-WOW cases for pcie bus state. Firmware does not expects WOW_IFACE_PAUSE_ENABLED config for bus/link that cannot be suspended ex:snoc and does not trigger common subsystem shutdown. Disable interface pause wow config for integrated chipset(WCN3990) for correct WOW configuration in the firmware. Testing: Tested on WCN3990 HW. Tested FW: WLAN.HL.2.0-01192-QCAHLSWMTPLZ-1. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-07ath10k: Enable bundle tx compl for management frames in WCN3990Rakesh Pillai1-0/+2
WCN3990 sends tx completion of multiple management frames bundled together in a single event, if the host driver exposes the support to handle this bundled tx completion event. This reduces the number of WMI events which are sent to the host driver by the target. Set the BUNDLE_TX_COMPL flag in the host capability flags when host sends the wmi init command, to indicate the host capability to handle bundled tx completion for management frames. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-07ath10k: Handle bundled tx completion for management framesRakesh Pillai1-0/+1
WCN3990 supports sending tx completion for multiple management frames bundled together in a single event. Add support to handle the bundled tx completion event for WCN3990. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+3
Lots of conflicts, by happily all cases of overlapping changes, parallel adds, things of that nature. Thanks to Stephen Rothwell, Saeed Mahameed, and others for their guidance in these resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19ath10k: skip sending quiet mode cmd for WCN3990Rakesh Pillai1-0/+3
HL2.0 firmware does not support setting quiet mode. If the host driver sends the quiet mode setting command to the HL2.0 firmware, it crashes with the below signature. fatal error received: err_qdi.c:456:EX:wlan_process:1:WLAN RT:207a:PC=b001b4f0 The quiet mode command support is exposed by the firmware via thermal throttle wmi service. Enable ath10k thermal support if thermal throttle wmi service bit is set. 10.x firmware versions support this feature by default, but unfortunately do not advertise the support via service flags, hence have to manually set the service flag in ath10k_core_compat_services(). Tested on QCA988X with 10.2.4.70.9-2. Also tested on WCN3990. Co-developed-by: Govind Singh <govinds@codeaurora.org> Co-developed-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-05ath10k: fill the channel survey results for WCN3990 correctlyRakesh Pillai1-0/+10
The host driver currently expects the channel info event to be received in pairs for all the channels, i.e. the first chan_info event for a particular channel will not have the COMPLETE flag set and the second chan_info event for the same channel will have the COMPLETE flag set. The HL2.0 firmware sends only one channel info event per channel which is scanned without the COMPLETE flag set. After sending the chan_info_event for all the channels, the HL2.0 firmware sends a chan_info_event with COMPLETE flag set to indicate the completion of the channel info event. The firmware does not indicate this behavior with any service bitmap and hence a new firmware feature flag is used to handle the modified parsing of the channel info events, in the host driver, for the firmware which sends single channel info event per scanned channel. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Co-developed-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13ath10k: support NET_DETECT WoWLAN featureWen Gong1-0/+254
For WoWLAN support it is expected to support wake up based on discovery of one or more known SSIDs. This is the WIPHY_WOWLAN_NET_DETECT feature, which shows up as an NL80211 feature flag. This shows up in 'iw phy' as: WoWLAN support: * wake up on network detection, up to 16 match sets And it can be enabled with command: iw phy0 wowlan enable net-detect interval 5000 delay 30 freqs 2412 matches ssid foo Firmware will do scan by the configured parameters after suspend and wakeup if it found matched SSIDs. Tested with QCA6174 hw3.0 with firmware WLAN.RM.4.4.1-00110-QCARMSWPZ-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> [kvalo@codeaurora.org: fix lots of endian bugs, whitespace, commit log and style cleanup] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-30ath10k: handle mgmt tx completion eventRakesh Pillai1-0/+12
WCN3990 transmits management frames via WMI with reference. Currently, with the management tx completion not being handled, these frames are not getting freed even after the transmission status is returned by the firmware. The transmitted management frames should be freed when the firmware sends the over-the-air tx status of the corresponding management frames. Handle the wmi mgmt tx completion event and free the corresponding management frame. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-30ath10k: disable bundle mgmt tx completion event supportSurabhi Vishnoi1-0/+5
The tx completion of multiple mgmt frames can be bundled in a single event and sent by the firmware to host, if this capability is not disabled explicitly by the host. If the host cannot handle the bundled mgmt tx completion, this capability support needs to be disabled in the wmi init cmd, sent to the firmware. Add the host capability indication flag in the wmi ready command, to let firmware know the features supported by the host driver. This field is ignored if it is not supported by firmware. Set the host capability indication flag(i.e. host_capab) to zero, for disabling the support of bundle mgmt tx completion. This will indicate the firmware to send completion event for every mgmt tx completion, instead of bundling them together and sending in a single event. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12ath10k: add quiet mode support for QCA6174/QCA9377Yu Wang1-0/+16
To enable thermal throttling for QCA6174 and QCA9377, implement gen_pdev_set_quiet_mode for them. With this change, quiet period for QCA6174/QCA9377 can be also set/get via debugfs. Usage: To set quiet period: echo <period> > /sys/kernel/debug/ieee80211/phyX/ath10k/quiet_period To get the current quiet period: cat /sys/kernel/debug/ieee80211/phyX/ath10k/quiet_period This change has been verified with QCA6174 hw3.2(fw: WLAN_RM.4.4.1-00102-QCARMSWP-1). Signed-off-by: Yu Wang <yyuwang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24ath10k: support MAC address randomization in scanCarl Huang1-0/+11
The ath10k reports the random_mac_addr capability to upper layer based on the service bit firmware reported. Driver sets the spoofed flag in scan_ctrl_flag to firmware if upper layer has enabled this feature in scan request. Test with QCA6174 hw3.0 and firmware-6.bin_WLAN.RM.4.4.1-00102-QCARMSWP-1, but QCA9377 is also affected. Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24ath10k: add WMI_SERVICE_AVAILABLE_EVENT supportCarl Huang1-5/+341
Add WMI_SERVICE_AVAILABLE_EVENT to extend WMI_SERVICE_READY_EVENT, the 128bit service map in WMI_SERVICE_READY_EVENT is not enough for firmware to notice new WLAN service to host driver. Hereby, for thoese new WLAN service, firmware will notice host driver by WMI_SERVICE_AVAILABLE_EVENT. Signed-off-by: Alan Liu <alanliu@codeaurora.org> Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: enable TDLS peer inactivity detectionYingying Tang1-0/+7
Enable TDLS peer inactivity detetion feature. QCA6174 firmware(version: WLAN.RM.4.4) support TDLS link inactivity detecting. Set related parameters in TDLS WMI command to enable this feature. Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: enable QCA6174/QCA9377 to read the chip temperatureRyan Hsu1-0/+11
The firmware of QCA6174/QCA9377 already support the feature, just enable it to be able to handle the get_temperature command and process the event. You can read the temperature by using the hwmon interface, cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input Verified with the following hardware and software combination, QCA6174, only firmware-4.bin doesn't support this, otherwise all support. QCA9377, all the firmwares upstreamed support this command Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-27ath10k: update copyright yearKalle Valo1-1/+1
Update year for Qualcomm Atheros, Inc. copyrights. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-14ath10k: wmi: add management tx by reference support over wmiRakesh Pillai1-0/+67
HL1.0 firmware branch, used in wcn3990, transmits management frames by reference over WMI. Add support for management tx by reference over WMI. Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com> Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-14ath10k: wmi: modify svc bitmap parsing for wcn3990Rakesh Pillai1-0/+46
Due to the limitation of wmi tlv parsing logic, if there are two parameters in a wmi event with same tlv tag, we can get only the last value, as it overwrites the prev value of the same tlv tag. The service ready event in wcn3990 contains two parameters of the same tag UINT32, due to which the svc bitmap is overwritten with the DBS support parameter. Refactor the service ready event parsing to allow parsing two tlv of the same tag UINT32 for wcn3990. Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com> Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-13ath10k: add VHT160 supportSebastian Gottschall1-0/+1
This patch adds full VHT160 support for QCA9984 chipsets Tested on Netgear R7800. 80+80 is possible, but disabled so far since it seems to contain glitches like missing vht station flags (this may be firmware or mac80211 related). Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> [kvalo@qca.qualcomm.com: refactoring and fix few warnings] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-14ath10k: fix checkpatch warnings related to spacesKalle Valo1-2/+2
Fix checkpatch warnings about use of spaces with operators: spaces preferred around that '*' (ctx:VxV) This has been recently added to checkpatch. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: add abstraction layer for peer flagsTamizh chelvam1-0/+18
Abstraction layer for peer flags is added to fix ABI breakage. Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: SenthilKumar Jegadeesan <sjegadee@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-04-01ath10k: implement tx pause wmi eventMichal Kazior1-0/+42
qca6174 wmi-tlv firmware defines a new wmi event for host tx pausing (i.e. stop/wake tx queues). Map these events to ath10k/mac80211 tx queue control. This is important for multi-channel throughput performance. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-04-01ath10k: implement adaptive qcs commandMichal Kazior1-0/+4
This command will be used to configure multi-channel scheduler in firmware. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-30ath10k: add wmi support for tdlsMarek Puzyniak1-0/+53
As a part of tdls implementation introduce tdls related wmi data structures, constant values and functions. Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-30ath10k: add WMI support for WOW patternsJanusz Dziedzic1-0/+38
Add WMI support for WOW patterns. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-30ath10k: add WMI support for WOWJanusz Dziedzic1-0/+21
Add WMI support for WOW like enable, wakeup events and host wakeup indication. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-12ath10k: implement wmi roam eventMichal Kazior1-0/+6
This can be used to implement offloaded rssi threshold, beacon miss or even automatic in-firmware BSS roaming in the future. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-07ath10k: implement handling of p2p noa eventMichal Kazior1-0/+4
Since new wmi-tlv firmware doesn't have SWBA event the only way to deliver P2P NoA information is through a new dedicated event. This fixes P2P GO Probe Responses to include P2P NoA when appropriate on the new firmware. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-04ath10k: fix wmm params per vdevMarek Puzyniak1-0/+6
During wmm tests changing wmm parameters did not change anything. This was because of mismatch in WMM params per vdev command. WMM params per vdev uses different command structure than wmm params per pdev command. Patch concerns qca6174. Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-02-15ath10k: implement fw stats for wmi-tlvMichal Kazior1-0/+9
This processes and pushes fw stats to the debug module (if enabled). Changing the generic ath10k_wmi_requests_stats() call to use more stat bits has no effect on older firmware binaries. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-29ath10k: implement sta keepalive commandJanusz Dziedzic1-0/+7
New wmi-tlv firmware for qca6174 has STA keepalive service available. The service can provide automatic idle connection polling via NullFunc frames to AP when acting as a client. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-29ath10k: implement per-vdev wmm param setup commandMichal Kazior1-0/+4
New wmi-tlv firmware for qca6174 supports this. This will be used soon. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-27ath10k: implement diag data container eventMichal Kazior1-0/+19
Some firmware revisions may report this event as part of their diagnostics. This avoids `unknown event` warnings and adds tracing for the event. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-15ath10k: implement p2p bcn ie commandMichal Kazior1-0/+5
Along beacon template host is expected to setup p2p information elements as well. Implement wmi interface for it. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-15ath10k: implement prb tmpl wmi commandMichal Kazior1-0/+5
New firmware revisions with beacon templates need probe templates as well because they don't forward probe requests to host at all. This is required for new firmware to work with direct probe requests (notably required by hidden ssid AP). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-15ath10k: implement beacon template commandMichal Kazior1-0/+12
New firmware revisions may support setting beacon template. Implement wmi interface for it. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-15ath10k: implement new beacon tx status eventMichal Kazior1-0/+12
This event is delivered to host by firmware if it supports beacon templates only. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-08ath10k: implement wmi-tlv backendMichal Kazior1-0/+1380
Latest main firmware branch introduced a new WMI ABI called wmi-tlv. It is not a tlv strictly speaking but something that resembles it because it is ordered and may have duplicate id entries. This prepares ath10k to support new hw. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 07:53:59 +0300