summaryrefslogtreecommitdiff
path: root/drivers/net/wireguard
AgeCommit message (Collapse)AuthorFilesLines
2023-08-16genetlink: use attrs from struct genl_infoJakub Kicinski1-1/+1
Since dumps carry struct genl_info now, use the attrs pointer from genl_info and remove the one in struct genl_dumpit_info. Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230814214723.2924989-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07wireguard: allowedips: expand maximum node depthJason A. Donenfeld2-10/+14
In the allowedips self-test, nodes are inserted into the tree, but it generated an even amount of nodes, but for checking maximum node depth, there is of course the root node, which makes the total number necessarily odd. With two few nodes added, it never triggered the maximum depth check like it should have. So, add 129 nodes instead of 128 nodes, and do so with a more straightforward scheme, starting with all the bits set, and shifting over one each time. Then increase the maximum depth to 129, and choose a better name for that variable to make it clear that it represents depth as opposed to bits. Cc: stable@vger.kernel.org Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20230807132146.2191597-2-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-03wireguard: timers: move to using timer_delete_syncJason A. Donenfeld1-5/+5
The documentation says that del_timer_sync is obsolete, and code should use the equivalent timer_delete_sync instead, so switch to it. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-03wireguard: netlink: send staged packets when setting initial private keyJason A. Donenfeld1-5/+9
Packets bound for peers can queue up prior to the device private key being set. For example, if persistent keepalive is set, a packet is queued up to be sent as soon as the device comes up. However, if the private key hasn't been set yet, the handshake message never sends, and no timer is armed to retry, since that would be pointless. But, if a user later sets a private key, the expectation is that those queued packets, such as a persistent keepalive, are actually sent. So adjust the configuration logic to account for this edge case, and add a test case to make sure this works. Maxim noticed this with a wg-quick(8) config to the tune of: [Interface] PostUp = wg set %i private-key somefile [Peer] PublicKey = ... Endpoint = ... PersistentKeepalive = 25 Here, the private key gets set after the device comes up using a PostUp script, triggering the bug. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Reported-by: Maxim Cournoyer <maxim.cournoyer@gmail.com> Tested-by: Maxim Cournoyer <maxim.cournoyer@gmail.com> Link: https://lore.kernel.org/wireguard/87fs7xtqrv.fsf@gmail.com/ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-03wireguard: queueing: use saner cpu selection wrappingJason A. Donenfeld4-16/+14
Using `% nr_cpumask_bits` is slow and complicated, and not totally robust toward dynamic changes to CPU topologies. Rather than storing the next CPU in the round-robin, just store the last one, and also return that value. This simplifies the loop drastically into a much more common pattern. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Manuel Leiner <manuel.leiner@gmx.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-10net: move gso declarations and functions to their own filesEric Dumazet1-0/+1
Move declarations into include/net/gso.h and code into net/core/gso.c Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stanislav Fomichev <sdf@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230608191738.3947077-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-06cpumask: fix incorrect cpumask scanning result checksLinus Torvalds1-1/+1
It turns out that commit 596ff4a09b89 ("cpumask: re-introduce constant-sized cpumask optimizations") exposed a number of cases of drivers not checking the result of "cpumask_next()" and friends correctly. The documented correct check for "no more cpus in the cpumask" is to check for the result being equal or larger than the number of possible CPU ids, exactly _because_ we've always done those constant-sized cpumask scans using a widened type before. So the return value of a cpumask scan should be checked with if (cpu >= nr_cpu_ids) ... because the cpumask scan did not necessarily stop exactly *at* that maximum CPU id. But a few cases ended up instead using checks like if (cpu == nr_cpumask_bits) ... which used that internal "widened" number of bits. And that used to work pretty much by accident (ok, in this case "by accident" is simply because it matched the historical internal implementation of the cpumask scanning, so it was more of a "intentionally using implementation details rather than an accident"). But the extended constant-sized optimizations then did that internal implementation differently, and now that code that did things wrong but matched the old implementation no longer worked at all. Which then causes subsequent odd problems due to using what ends up being an invalid CPU ID. Most of these cases require either unusual hardware or special uses to hit, but the random.c one triggers quite easily. All you really need is to have a sufficiently small CONFIG_NR_CPUS value for the bit scanning optimization to be triggered, but not enough CPUs to then actually fill that widened cpumask. At that point, the cpumask scanning will return the NR_CPUS constant, which is _not_ the same as nr_cpumask_bits. This just does the mindless fix with sed -i 's/== nr_cpumask_bits/>= nr_cpu_ids/' to fix the incorrect uses. The ones in the SCSI lpfc driver in particular could probably be fixed more cleanly by just removing that repeated pattern entirely, but I am not emptionally invested enough in that driver to care. Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/lkml/481b19b5-83a0-4793-b4fd-194ad7b978c3@roeck-us.net/ Reported-and-tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/lkml/CAMuHMdUKo_Sf7TjKzcNDa8Ve+6QrK+P8nSQrSQ=6LTRmcBKNww@mail.gmail.com/ Reported-by: Vernon Yang <vernon2gm@gmail.com> Link: https://lore.kernel.org/lkml/20230306160651.2016767-1-vernon2gm@gmail.com/ Cc: Yury Norov <yury.norov@gmail.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-14wireguard: timers: cast enum limits members to int in printsJiri Slaby (SUSE)1-4/+4
Since gcc13, each member of an enum has the same type as the enum. And that is inherited from its members. Provided "REKEY_AFTER_MESSAGES = 1ULL << 60", the named type is unsigned long. This generates warnings with gcc-13: error: format '%d' expects argument of type 'int', but argument 6 has type 'long unsigned int' Cast those particular enum members to int when printing them. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36113 Cc: Martin Liska <mliska@suse.cz> Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/all/20221213225208.3343692-2-Jason@zx2c4.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18treewide: use get_random_u32_inclusive() when possibleJason A. Donenfeld1-4/+4
These cases were done with this Coccinelle: @@ expression H; expression L; @@ - (get_random_u32_below(H) + L) + get_random_u32_inclusive(L, H + L - 1) @@ expression H; expression L; expression E; @@ get_random_u32_inclusive(L, H - + E - - E ) @@ expression H; expression L; expression E; @@ get_random_u32_inclusive(L, H - - E - + E ) @@ expression H; expression L; expression E; expression F; @@ get_random_u32_inclusive(L, H - - E + F - + E ) @@ expression H; expression L; expression E; expression F; @@ get_random_u32_inclusive(L, H - + E + F - - E ) And then subsequently cleaned up by hand, with several automatic cases rejected if it didn't make sense contextually. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-18treewide: use get_random_u32_below() instead of deprecated functionJason A. Donenfeld2-12/+12
This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-12treewide: use get_random_bytes() when possibleJason A. Donenfeld1-6/+6
The prandom_bytes() function has been a deprecated inline wrapper around get_random_bytes() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-12treewide: use get_random_{u8,u16}() when possible, part 1Jason A. Donenfeld1-2/+2
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done mechanically with this coccinelle script: @@ expression E; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; typedef __be16; typedef __le16; typedef u8; @@ ( - (get_random_u32() & 0xffff) + get_random_u16() | - (get_random_u32() & 0xff) + get_random_u8() | - (get_random_u32() % 65536) + get_random_u16() | - (get_random_u32() % 256) + get_random_u8() | - (get_random_u32() >> 16) + get_random_u16() | - (get_random_u32() >> 24) + get_random_u8() | - (u16)get_random_u32() + get_random_u16() | - (u8)get_random_u32() + get_random_u8() | - (__be16)get_random_u32() + (__be16)get_random_u16() | - (__le16)get_random_u32() + (__le16)get_random_u16() | - prandom_u32_max(65536) + get_random_u16() | - prandom_u32_max(256) + get_random_u8() | - E->inet_id = get_random_u32() + E->inet_id = get_random_u16() ) @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; identifier v; @@ - u16 v = get_random_u32(); + u16 v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; identifier v; @@ - u8 v = get_random_u32(); + u8 v = get_random_u8(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; u16 v; @@ - v = get_random_u32(); + v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; u8 v; @@ - v = get_random_u32(); + v = get_random_u8(); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Examine limits @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value < 256: coccinelle.RESULT = cocci.make_ident("get_random_u8") elif value < 65536: coccinelle.RESULT = cocci.make_ident("get_random_u16") else: print("Skipping large mask of %s" % (literal)) cocci.include_match(False) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; identifier add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + (RESULT() & LITERAL) Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-09-29net: drop the weight argument from netif_napi_addJakub Kicinski1-2/+1
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-22/+16
drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20wireguard: netlink: avoid variable-sized memcpy on sockaddrJason A. Donenfeld1-7/+6
Doing a variable-sized memcpy is slower, and the compiler isn't smart enough to turn this into a constant-size assignment. Further, Kees' latest fortified memcpy will actually bark, because the destination pointer is type sockaddr, not explicitly sockaddr_in or sockaddr_in6, so it thinks there's an overflow: memcpy: detected field-spanning write (size 28) of single field "&endpoint.addr" at drivers/net/wireguard/netlink.c:446 (size 16) Fix this by just assigning by using explicit casts for each checked case. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reported-by: syzbot+a448cda4dba2dac50de5@syzkaller.appspotmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20wireguard: ratelimiter: disable timings test by defaultJason A. Donenfeld1-15/+10
A previous commit tried to make the ratelimiter timings test more reliable but in the process made it less reliable on other configurations. This is an impossible problem to solve without increasingly ridiculous heuristics. And it's not even a problem that actually needs to be solved in any comprehensive way, since this is only ever used during development. So just cordon this off with a DEBUG_ ifdef, just like we do for the trie's randomized tests, so it can be enabled while hacking on the code, and otherwise disabled in CI. In the process we also revert 151c8e499f47. Fixes: 151c8e499f47 ("wireguard: ratelimiter: use hrtimer in selftest") Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-29genetlink: start to validate reserved header bytesJakub Kicinski1-0/+1
We had historically not checked that genlmsghdr.reserved is 0 on input which prevents us from using those precious bytes in the future. One use case would be to extend the cmd field, which is currently just 8 bits wide and 256 is not a lot of commands for some core families. To make sure that new families do the right thing by default put the onus of opting out of validation on existing families. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel) Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-04Merge tag 'char-misc-6.0-rc1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem changes for 6.0-rc1. Highlights include: - large set of IIO driver updates, additions, and cleanups - new habanalabs device support added (loads of register maps much like GPUs have) - soundwire driver updates - phy driver updates - slimbus driver updates - tiny virt driver fixes and updates - misc driver fixes and updates - interconnect driver updates - hwtracing driver updates - fpga driver updates - extcon driver updates - firmware driver updates - counter driver update - mhi driver fixes and updates - binder driver fixes and updates - speakup driver fixes All of these have been in linux-next for a while without any reported problems" * tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits) drivers: lkdtm: fix clang -Wformat warning char: remove VR41XX related char driver misc: Mark MICROCODE_MINOR unused spmi: trace: fix stack-out-of-bound access in SPMI tracing functions dt-bindings: iio: adc: Add compatible for MT8188 iio: light: isl29028: Fix the warning in isl29028_remove() iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes iio: fix iio_format_avail_range() printing for none IIO_VAL_INT iio: adc: max1027: unlock on error path in max1027_read_single_value() iio: proximity: sx9324: add empty line in front of bullet list iio: magnetometer: hmc5843: Remove duplicate 'the' iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr() iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr() ...
2022-08-02wireguard: allowedips: don't corrupt stack when detecting overflowJason A. Donenfeld2-6/+9
In case push_rcu() and related functions are buggy, there's a WARN_ON(len >= 128), which the selftest tries to hit by being tricky. In case it is hit, we shouldn't corrupt the kernel's stack, though; otherwise it may be hard to even receive the report that it's buggy. So conditionalize the stack write based on that WARN_ON()'s return value. Note that this never *actually* happens anyway. The WARN_ON() in the first place is bounded by IS_ENABLED(DEBUG), and isn't expected to ever actually hit. This is just a debugging sanity check. Additionally, hoist the constant 128 into a named enum, MAX_ALLOWEDIPS_BITS, so that it's clear why this value is chosen. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/all/CAHk-=wjJZGA6w_DxA+k7Ejbqsq+uGK==koPai3sqdsfJqemvag@mail.gmail.com/ Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-02wireguard: ratelimiter: use hrtimer in selftestJason A. Donenfeld1-11/+14
Using msleep() is problematic because it's compared against ratelimiter.c's ktime_get_coarse_boottime_ns(), which means on systems with slow jiffies (such as UML's forced HZ=100), the result is inaccurate. So switch to using schedule_hrtimeout(). However, hrtimer gives us access only to the traditional posix timers, and none of the _COARSE variants. So now, rather than being too imprecise like jiffies, it's too precise. One solution would be to give it a large "range" value, but this will still fire early on a loaded system. A better solution is to align the timeout to the actual coarse timer, and then round up to the nearest tick, plus change. So add the timeout to the current coarse time, and then schedule_hrtimer() until the absolute computed time. This should hopefully reduce flakes in CI as well. Note that we keep the retry loop in case the entire function is running behind, because the test could still be scheduled out, by either the kernel or by the hypervisor's kernel, in which case restarting the test and hoping to not be scheduled out still helps. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01pm/sleep: Add PM_USERSPACE_AUTOSLEEP KconfigKalesh Singh1-1/+2
Systems that initiate frequent suspend/resume from userspace can make the kernel aware by enabling PM_USERSPACE_AUTOSLEEP config. This allows for certain sleep-sensitive code (wireguard/rng) to decide on what preparatory work should be performed (or not) in their pm_notification callbacks. This patch was prompted by the discussion at [1] which attempts to remove CONFIG_ANDROID that currently guards these code paths. [1] https://lore.kernel.org/r/20220629150102.1582425-1-hch@lst.de/ Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Link: https://lore.kernel.org/r/20220630191230.235306-1-kaleshsingh@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10wireguard: receive: use dev_sw_netstats_rx_add()Eric Dumazet1-8/+1
We have a convenient helper, let's use it. This will make the following patch easier to review and smaller. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-23wireguard: device: check for metadata_dst with skb_valid_dst()Nikolay Aleksandrov1-1/+2
When we try to transmit an skb with md_dst attached through wireguard we hit a null pointer dereference in wg_xmit() due to the use of dst_mtu() which calls into dst_blackhole_mtu() which in turn tries to dereference dst->dev. Since wireguard doesn't use md_dsts we should use skb_valid_dst(), which checks for DST_METADATA flag, and if it's set, then falls back to wireguard's device mtu. That gives us the best chance of transmitting the packet; otherwise if the blackhole netdev is used we'd get ETH_MIN_MTU. [ 263.693506] BUG: kernel NULL pointer dereference, address: 00000000000000e0 [ 263.693908] #PF: supervisor read access in kernel mode [ 263.694174] #PF: error_code(0x0000) - not-present page [ 263.694424] PGD 0 P4D 0 [ 263.694653] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 263.694876] CPU: 5 PID: 951 Comm: mausezahn Kdump: loaded Not tainted 5.18.0-rc1+ #522 [ 263.695190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014 [ 263.695529] RIP: 0010:dst_blackhole_mtu+0x17/0x20 [ 263.695770] Code: 00 00 00 0f 1f 44 00 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 47 10 48 83 e0 fc 8b 40 04 85 c0 75 09 48 8b 07 <8b> 80 e0 00 00 00 c3 66 90 0f 1f 44 00 00 48 89 d7 be 01 00 00 00 [ 263.696339] RSP: 0018:ffffa4a4422fbb28 EFLAGS: 00010246 [ 263.696600] RAX: 0000000000000000 RBX: ffff8ac9c3553000 RCX: 0000000000000000 [ 263.696891] RDX: 0000000000000401 RSI: 00000000fffffe01 RDI: ffffc4a43fb48900 [ 263.697178] RBP: ffffa4a4422fbb90 R08: ffffffff9622635e R09: 0000000000000002 [ 263.697469] R10: ffffffff9b69a6c0 R11: ffffa4a4422fbd0c R12: ffff8ac9d18b1a00 [ 263.697766] R13: ffff8ac9d0ce1840 R14: ffff8ac9d18b1a00 R15: ffff8ac9c3553000 [ 263.698054] FS: 00007f3704c337c0(0000) GS:ffff8acaebf40000(0000) knlGS:0000000000000000 [ 263.698470] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 263.698826] CR2: 00000000000000e0 CR3: 0000000117a5c000 CR4: 00000000000006e0 [ 263.699214] Call Trace: [ 263.699505] <TASK> [ 263.699759] wg_xmit+0x411/0x450 [ 263.700059] ? bpf_skb_set_tunnel_key+0x46/0x2d0 [ 263.700382] ? dev_queue_xmit_nit+0x31/0x2b0 [ 263.700719] dev_hard_start_xmit+0xd9/0x220 [ 263.701047] __dev_queue_xmit+0x8b9/0xd30 [ 263.701344] __bpf_redirect+0x1a4/0x380 [ 263.701664] __dev_queue_xmit+0x83b/0xd30 [ 263.701961] ? packet_parse_headers+0xb4/0xf0 [ 263.702275] packet_sendmsg+0x9a8/0x16a0 [ 263.702596] ? _raw_spin_unlock_irqrestore+0x23/0x40 [ 263.702933] sock_sendmsg+0x5e/0x60 [ 263.703239] __sys_sendto+0xf0/0x160 [ 263.703549] __x64_sys_sendto+0x20/0x30 [ 263.703853] do_syscall_64+0x3b/0x90 [ 263.704162] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 263.704494] RIP: 0033:0x7f3704d50506 [ 263.704789] Code: 48 c7 c0 ff ff ff ff eb b7 66 2e 0f 1f 84 00 00 00 00 00 90 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89 [ 263.705652] RSP: 002b:00007ffe954b0b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 263.706141] RAX: ffffffffffffffda RBX: 0000558bb259b490 RCX: 00007f3704d50506 [ 263.706544] RDX: 000000000000004a RSI: 0000558bb259b7b2 RDI: 0000000000000003 [ 263.706952] RBP: 0000000000000000 R08: 00007ffe954b0b90 R09: 0000000000000014 [ 263.707339] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe954b0b90 [ 263.707735] R13: 000000000000004a R14: 0000558bb259b7b2 R15: 0000000000000001 [ 263.708132] </TASK> [ 263.708398] Modules linked in: bridge netconsole bonding [last unloaded: bridge] [ 263.708942] CR2: 00000000000000e0 Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Link: https://github.com/cilium/cilium/issues/19428 Reported-by: Martynas Pumputis <m@lambda.lt> Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-31wireguard: socket: ignore v6 endpoints when ipv6 is disabledJason A. Donenfeld1-2/+2
The previous commit fixed a memory leak on the send path in the event that IPv6 is disabled at compile time, but how did a packet even arrive there to begin with? It turns out we have previously allowed IPv6 endpoints even when IPv6 support is disabled at compile time. This is awkward and inconsistent. Instead, let's just ignore all things IPv6, the same way we do other malformed endpoints, in the case where IPv6 is disabled. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-31wireguard: socket: free skb in send6 when ipv6 is disabledWang Hai1-0/+1
I got a memory leak report: unreferenced object 0xffff8881191fc040 (size 232): comm "kworker/u17:0", pid 23193, jiffies 4295238848 (age 3464.870s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff814c3ef4>] slab_post_alloc_hook+0x84/0x3b0 [<ffffffff814c8977>] kmem_cache_alloc_node+0x167/0x340 [<ffffffff832974fb>] __alloc_skb+0x1db/0x200 [<ffffffff82612b5d>] wg_socket_send_buffer_to_peer+0x3d/0xc0 [<ffffffff8260e94a>] wg_packet_send_handshake_initiation+0xfa/0x110 [<ffffffff8260ec81>] wg_packet_handshake_send_worker+0x21/0x30 [<ffffffff8119c558>] process_one_work+0x2e8/0x770 [<ffffffff8119ca2a>] worker_thread+0x4a/0x4b0 [<ffffffff811a88e0>] kthread+0x120/0x160 [<ffffffff8100242f>] ret_from_fork+0x1f/0x30 In function wg_socket_send_buffer_as_reply_to_skb() or wg_socket_send_ buffer_to_peer(), the semantics of send6() is required to free skb. But when CONFIG_IPV6 is disable, kfree_skb() is missing. This patch adds it to fix this bug. Signed-off-by: Wang Hai <wanghai38@huawei.com> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-31wireguard: queueing: use CFI-safe ptr_ring cleanup functionJason A. Donenfeld1-1/+2
We make too nuanced use of ptr_ring to entirely move to the skb_array wrappers, but we at least should avoid the naughty function pointer cast when cleaning up skbs. Otherwise RAP/CFI will honk at us. This patch uses the __skb_array_destroy_skb wrapper for the cleanup, rather than directly providing kfree_skb, which is what other drivers in the same situation do too. Reported-by: PaX Team <pageexec@freemail.hu> Fixes: 886fcee939ad ("wireguard: receive: use ring buffer for incoming handshakes") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-13wireguard: device: clear keys on VM forkJason A. Donenfeld1-11/+27
When a virtual machine forks, it's important that WireGuard clear existing sessions so that different plaintexts are not transmitted using the same key+nonce, which can result in catastrophic cryptographic failure. To accomplish this, we simply hook into the newly added vmfork notifier. As a bonus, it turns out that, like the vmfork registration function, the PM registration function is stubbed out when CONFIG_PM_SLEEP is not set, so we can actually just remove the maze of ifdefs, which makes it really quite clean to support both notifiers at once. Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Theodore Ts'o <tytso@mit.edu> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-01-18lib/crypto: blake2s: move hmac construction into wireguardJason A. Donenfeld1-6/+39
Basically nobody should use blake2s in an HMAC construction; it already has a keyed variant. But unfortunately for historical reasons, Noise, used by WireGuard, uses HKDF quite strictly, which means we have to use this. Because this really shouldn't be used by others, this commit moves it into wireguard's noise.c locally, so that kernels that aren't using WireGuard don't get this superfluous code baked in. On m68k systems, this shaves off ~314 bytes. Cc: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2021-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski9-52/+59
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-30wireguard: ratelimiter: use kvcalloc() instead of kvzalloc()Gustavo A. R. Silva1-2/+2
Use 2-factor argument form kvcalloc() instead of kvzalloc(). Link: https://github.com/KSPP/linux/issues/162 Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> [Jason: Gustavo's link above is for KSPP, but this isn't actually a security fix, as table_size is bounded to 8192 anyway, and gcc realizes this, so the codegen comes out to be about the same.] Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-30wireguard: receive: drop handshakes if queue lock is contendedJason A. Donenfeld1-3/+13
If we're being delivered packets from multiple CPUs so quickly that the ring lock is contended for CPU tries, then it's safe to assume that the queue is near capacity anyway, so just drop the packet rather than spinning. This helps deal with multicore DoS that can interfere with data path performance. It _still_ does not completely fix the issue, but it again chips away at it. Reported-by: Streun Fabio <fstreun@student.ethz.ch> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-30wireguard: receive: use ring buffer for incoming handshakesJason A. Donenfeld5-43/+37
Apparently the spinlock on incoming_handshake's skb_queue is highly contended, and a torrent of handshake or cookie packets can bring the data plane to its knees, simply by virtue of enqueueing the handshake packets to be processed asynchronously. So, we try switching this to a ring buffer to hopefully have less lock contention. This alleviates the problem somewhat, though it still isn't perfect, so future patches will have to improve this further. However, it at least doesn't completely diminish the data plane. Reported-by: Streun Fabio <fstreun@student.ethz.ch> Reported-by: Joel Wanner <joel.wanner@inf.ethz.ch> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-30wireguard: device: reset peer src endpoint when netns exitsJason A. Donenfeld2-1/+4
Each peer's endpoint contains a dst_cache entry that takes a reference to another netdev. When the containing namespace exits, we take down the socket and prevent future sockets from being created (by setting creating_net to NULL), which removes that potential reference on the netns. However, it doesn't release references to the netns that a netdev cached in dst_cache might be taking, so the netns still might fail to exit. Since the socket is gimped anyway, we can simply clear all the dst_caches (by way of clearing the endpoint src), which will release all references. However, the current dst_cache_reset function only releases those references lazily. But it turns out that all of our usages of wg_socket_clear_peer_endpoint_src are called from contexts that are not exactly high-speed or bottle-necked. For example, when there's connection difficulty, or when userspace is reconfiguring the interface. And in particular for this patch, when the netns is exiting. So for those cases, it makes more sense to call dst_release immediately. For that, we add a small helper function to dst_cache. This patch also adds a test to netns.sh from Hangbin Liu to ensure this doesn't regress. Tested-by: Hangbin Liu <liuhangbin@gmail.com> Reported-by: Xiumei Mu <xmu@redhat.com> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Cc: Paolo Abeni <pabeni@redhat.com> Fixes: 900575aa33a3 ("wireguard: device: avoid circular netns references") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-30wireguard: main: rename 'mod_init' & 'mod_exit' functions to be module-specificRandy Dunlap1-4/+4
Rename module_init & module_exit functions that are named "mod_init" and "mod_exit" so that they are unique in both the System.map file and in initcall_debug output instead of showing up as almost anonymous "mod_init". This is helpful for debugging and in determining how long certain module_init calls take to execute. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-30wireguard: allowedips: add missing __rcu annotation to satisfy sparseJason A. Donenfeld1-1/+1
A __rcu annotation got lost during refactoring, which caused sparse to become enraged. Fixes: bf7b042dc62a ("wireguard: allowedips: free empty intermediate nodes when removing single node") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-22skbuff: Switch structure bounds to struct_group()Kees Cook1-3/+1
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Replace the existing empty member position markers "headers_start" and "headers_end" with a struct_group(). This will allow memcpy() and sizeof() to more easily reason about sizes, and improve readability. "pahole" shows no size nor member offset changes to struct sk_buff. "objdump -d" shows no object code changes (outside of WARNs affected by source line number changes). Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> # drivers/net/wireguard/* Link: https://lore.kernel.org/lkml/20210728035006.GD35706@embeddedor Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-05wireguard: allowedips: free empty intermediate nodes when removing single nodeJason A. Donenfeld3-131/+137
When removing single nodes, it's possible that that node's parent is an empty intermediate node, in which case, it too should be removed. Otherwise the trie fills up and never is fully emptied, leading to gradual memory leaks over time for tries that are modified often. There was originally code to do this, but was removed during refactoring in 2016 and never reworked. Now that we have proper parent pointers from the previous commits, we can implement this properly. In order to reduce branching and expensive comparisons, we want to keep the double pointer for parent assignment (which lets us easily chain up to the root), but we still need to actually get the parent's base address. So encode the bit number into the last two bits of the pointer, and pack and unpack it as needed. This is a little bit clumsy but is the fastest and less memory wasteful of the compromises. Note that we align the root struct here to a minimum of 4, because it's embedded into a larger struct, and we're relying on having the bottom two bits for our flag, which would only be 16-bit aligned on m68k. The existing macro-based helpers were a bit unwieldy for adding the bit packing to, so this commit replaces them with safer and clearer ordinary functions. We add a test to the randomized/fuzzer part of the selftests, to free the randomized tries by-peer, refuzz it, and repeat, until it's supposed to be empty, and then then see if that actually resulted in the whole thing being emptied. That combined with kmemcheck should hopefully make sure this commit is doing what it should. Along the way this resulted in various other cleanups of the tests and fixes for recent graphviz. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-05wireguard: allowedips: allocate nodes in kmem_cacheJason A. Donenfeld3-8/+38
The previous commit moved from O(n) to O(1) for removal, but in the process introduced an additional pointer member to a struct that increased the size from 60 to 68 bytes, putting nodes in the 128-byte slab. With deployed systems having as many as 2 million nodes, this represents a significant doubling in memory usage (128 MiB -> 256 MiB). Fix this by using our own kmem_cache, that's sized exactly right. This also makes wireguard's memory usage more transparent in tools like slabtop and /proc/slabinfo. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Matthew Wilcox <willy@infradead.org> Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-05wireguard: allowedips: remove nodes in O(1)Jason A. Donenfeld2-84/+57
Previously, deleting peers would require traversing the entire trie in order to rebalance nodes and safely free them. This meant that removing 1000 peers from a trie with a half million nodes would take an extremely long time, during which we're holding the rtnl lock. Large-scale users were reporting 200ms latencies added to the networking stack as a whole every time their userspace software would queue up significant removals. That's a serious situation. This commit fixes that by maintaining a double pointer to the parent's bit pointer for each node, and then using the already existing node list belonging to each peer to go directly to the node, fix up its pointers, and free it with RCU. This means removal is O(1) instead of O(n), and we don't use gobs of stack. The removal algorithm has the same downside as the code that it fixes: it won't collapse needlessly long runs of fillers. We can enhance that in the future if it ever becomes a problem. This commit documents that limitation with a TODO comment in code, a small but meaningful improvement over the prior situation. Currently the biggest flaw, which the next commit addresses, is that because this increases the node size on 64-bit machines from 60 bytes to 68 bytes. 60 rounds up to 64, but 68 rounds up to 128. So we wind up using twice as much memory per node, because of power-of-two allocations, which is a big bummer. We'll need to figure something out there. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-05wireguard: allowedips: initialize list head in selftestJason A. Donenfeld1-1/+2
The randomized trie tests weren't initializing the dummy peer list head, resulting in a NULL pointer dereference when used. Fix this by initializing it in the randomized trie test, just like we do for the static unit test. While we're at it, all of the other strings like this have the word "self-test", so add it to the missing place here. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-05wireguard: peer: allocate in kmem_cacheJason A. Donenfeld3-4/+27
With deployments having upwards of 600k peers now, this somewhat heavy structure could benefit from more fine-grained allocations. Specifically, instead of using a 2048-byte slab for a 1544-byte object, we can now use 1544-byte objects directly, thus saving almost 25% per-peer, or with 600k peers, that's a savings of 303 MiB. This also makes wireguard's memory usage more transparent in tools like slabtop and /proc/slabinfo. Fixes: 8b5553ace83c ("wireguard: queueing: get rid of per-peer ring buffers") Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Matthew Wilcox <willy@infradead.org> Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-05wireguard: use synchronize_net rather than synchronize_rcuJason A. Donenfeld2-4/+4
Many of the synchronization points are sometimes called under the rtnl lock, which means we should use synchronize_net rather than synchronize_rcu. Under the hood, this expands to using the expedited flavor of function in the event that rtnl is held, in order to not stall other concurrent changes. This fixes some very, very long delays when removing multiple peers at once, which would cause some operations to take several minutes. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-05wireguard: do not use -O3Jason A. Donenfeld1-2/+1
Apparently, various versions of gcc have O3-related miscompiles. Looking at the difference between -O2 and -O3 for gcc 11 doesn't indicate miscompiles, but the difference also doesn't seem so significant for performance that it's worth risking. Link: https://lore.kernel.org/lkml/CAHk-=wjuoGyxDhAF8SsrTkN0-YfCx7E6jUN3ikC_tn2AKWTTsA@mail.gmail.com/ Link: https://lore.kernel.org/lkml/CAHmME9otB5Wwxp7H8bR_i2uH2esEMvoBMC8uEXBMH9p0q1s6Bw@mail.gmail.com/ Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-24wireguard: queueing: get rid of per-peer ring buffersJason A. Donenfeld8-93/+144
Having two ring buffers per-peer means that every peer results in two massive ring allocations. On an 8-core x86_64 machine, this commit reduces the per-peer allocation from 18,688 bytes to 1,856 bytes, which is an 90% reduction. Ninety percent! With some single-machine deployments approaching 500,000 peers, we're talking about a reduction from 7 gigs of memory down to 700 megs of memory. In order to get rid of these per-peer allocations, this commit switches to using a list-based queueing approach. Currently GSO fragments are chained together using the skb->next pointer (the skb_list_* singly linked list approach), so we form the per-peer queue around the unused skb->prev pointer (which sort of makes sense because the links are pointing backwards). Use of skb_queue_* is not possible here, because that is based on doubly linked lists and spinlocks. Multiple cores can write into the queue at any given time, because its writes occur in the start_xmit path or in the udp_recv path. But reads happen in a single workqueue item per-peer, amounting to a multi-producer, single-consumer paradigm. The MPSC queue is implemented locklessly and never blocks. However, it is not linearizable (though it is serializable), with a very tight and unlikely race on writes, which, when hit (some tiny fraction of the 0.15% of partial adds on a fully loaded 16-core x86_64 system), causes the queue reader to terminate early. However, because every packet sent queues up the same workqueue item after it is fully added, the worker resumes again, and stopping early isn't actually a problem, since at that point the packet wouldn't have yet been added to the encryption queue. These properties allow us to avoid disabling interrupts or spinning. The design is based on Dmitry Vyukov's algorithm [1]. Performance-wise, ordinarily list-based queues aren't preferable to ringbuffers, because of cache misses when following pointers around. However, we *already* have to follow the adjacent pointers when working through fragments, so there shouldn't actually be any change there. A potential downside is that dequeueing is a bit more complicated, but the ptr_ring structure used prior had a spinlock when dequeueing, so all and all the difference appears to be a wash. Actually, from profiling, the biggest performance hit, by far, of this commit winds up being atomic_add_unless(count, 1, max) and atomic_ dec(count), which account for the majority of CPU time, according to perf. In that sense, the previous ring buffer was superior in that it could check if it was full by head==tail, which the list-based approach cannot do. But all and all, this enables us to get massive memory savings, allowing WireGuard to scale for real world deployments, without taking much of a performance hit. [1] http://www.1024cores.net/home/lock-free-algorithms/queues/intrusive-mpsc-node-based-queue Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-24wireguard: device: do not generate ICMP for non-IP packetsJason A. Donenfeld1-3/+4
If skb->protocol doesn't match the actual skb->data header, it's probably not a good idea to pass it off to icmp{,v6}_ndo_send, which is expecting to reply to a valid IP packet. So this commit has that early mismatch case jump to a later error label. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-24wireguard: peer: put frequently used members above cache linesJason A. Donenfeld1-2/+2
The is_dead boolean is checked for every single packet, while the internal_id member is used basically only for pr_debug messages. So it makes sense to hoist up is_dead into some space formerly unused by a struct hole, while demoting internal_api to below the lowest struct cache line. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-24wireguard: socket: remove bogus __be32 annotationJann Horn1-2/+2
The endpoint->src_if4 has nothing to do with fixed-endian numbers; remove the bogus annotation. This was introduced in https://git.zx2c4.com/wireguard-monolithic-historical/commit?id=14e7d0a499a676ec55176c0de2f9fcbd34074a82 in the historical WireGuard repo because the old code used to zero-initialize multiple members as follows: endpoint->src4.s_addr = endpoint->src_if4 = fl.saddr = 0; Because fl.saddr is fixed-endian and an assignment returns a value with the type of its left operand, this meant that sparse detected an assignment between values of different endianness. Since then, this assignment was already split up into separate statements; just the cast survived. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-24wireguard: avoid double unlikely() notation when using IS_ERR()Antonio Quartulli2-3/+3
The definition of IS_ERR() already applies the unlikely() notation when checking the error status of the passed pointer. For this reason there is no need to have the same notation outside of IS_ERR() itself. Clean up code by removing redundant notation. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16Merge tag 'selinux-pr-20201214' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: "While we have a small number of SELinux patches for v5.11, there are a few changes worth highlighting: - Change the LSM network hooks to pass flowi_common structs instead of the parent flowi struct as the LSMs do not currently need the full flowi struct and they do not have enough information to use it safely (missing information on the address family). This patch was discussed both with Herbert Xu (representing team netdev) and James Morris (representing team LSMs-other-than-SELinux). - Fix how we handle errors in inode_doinit_with_dentry() so that we attempt to properly label the inode on following lookups instead of continuing to treat it as unlabeled. - Tweak the kernel logic around allowx, auditallowx, and dontauditx SELinux policy statements such that the auditx/dontauditx are effective even without the allowx statement. Everything passes our test suite" * tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: lsm,selinux: pass flowi_common instead of flowi to the LSM hooks selinux: Fix fall-through warnings for Clang selinux: drop super_block backpointer from superblock_security_struct selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling selinux: allow dontauditx and auditallowx rules to take effect without allowx selinux: fix error initialization in inode_doinit_with_dentry()
2020-11-24lsm,selinux: pass flowi_common instead of flowi to the LSM hooksPaul Moore1-2/+2
As pointed out by Herbert in a recent related patch, the LSM hooks do not have the necessary address family information to use the flowi struct safely. As none of the LSMs currently use any of the protocol specific flowi information, replace the flowi pointers with pointers to the address family independent flowi_common struct. Reported-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 20:00:53 +0300