| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 0a8d8c446b5429d15ff2d48f46e00d8a08552303 upstream.
Since commit d25f06ea466e "vmxnet3: fix netpoll race condition",
the vmxnet3 driver fails to build when CONFIG_PCI_MSI is disabled,
because it unconditionally references the vmxnet3_msix_rx()
function.
To fix this, use the same #ifdef in the caller that exists around
the function definition.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Shreyas Bhatewara <sbhatewara@vmware.com>
Cc: "VMware, Inc." <pv-drivers@vmware.com>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit d25f06ea466ea521b563b76661180b4e44714ae6 upstream.
vmxnet3's netpoll driver is incorrectly coded. It directly calls
vmxnet3_do_poll, which is the driver internal napi poll routine. As the netpoll
controller method doesn't block real napi polls in any way, there is a potential
for race conditions in which the netpoll controller method and the napi poll
method run concurrently. The result is data corruption causing panics such as this
one recently observed:
PID: 1371 TASK: ffff88023762caa0 CPU: 1 COMMAND: "rs:main Q:Reg"
#0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b
#1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92
#2 [ffff88023abd58b0] oops_end at ffffffff8152b570
#3 [ffff88023abd58e0] die at ffffffff81010e0b
#4 [ffff88023abd5910] do_trap at ffffffff8152add4
#5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95
#6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b
[exception RIP: vmxnet3_rq_rx_complete+1968]
RIP: ffffffffa00f1e80 RSP: ffff88023abd5ac8 RFLAGS: 00010086
RAX: 0000000000000000 RBX: ffff88023b5dcee0 RCX: 00000000000000c0
RDX: 0000000000000000 RSI: 00000000000005f2 RDI: ffff88023b5dcee0
RBP: ffff88023abd5b48 R8: 0000000000000000 R9: ffff88023a3b6048
R10: 0000000000000000 R11: 0000000000000002 R12: ffff8802398d4cd8
R13: ffff88023af35140 R14: ffff88023b60c890 R15: 0000000000000000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3]
#8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3]
#9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7
The fix is to do as other drivers do, and have the poll controller call the top
half interrupt handler, which schedules a napi poll properly to recieve frames
Tested by myself, successfully.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Shreyas Bhatewara <sbhatewara@vmware.com>
CC: "VMware, Inc." <pv-drivers@vmware.com>
CC: "David S. Miller" <davem@davemloft.net>
Reviewed-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
[ Upstream commit efead8710aad9e384730ecf25eae0287878840d7 ]
Fix transport header size
Fix the transpoert header size for UDP packets.
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The device.h header was including module.h, making it present for
most of these drivers. But we want to clean that up. Call out the
include of module.h in the modular network drivers.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
To ease skb->truesize sanitization, its better to be able to localize
all references to skb frags size.
Define accessors : skb_frag_size() to fetch frag size, and
skb_frag_size_{set|add|sub}() to manipulate it.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
vmxnet3 allocates a page per skb fragment. We must account
PAGE_SIZE increments on skb->truesize, not the actual frag length.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When I converted some drivers from pci_map_page to skb_frag_dma_map I
neglected to convert PCI_DMA_xDEVICE into DMA_x_DEVICE and
pci_dma_mapping_error into dma_mapping_error.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Shreyas Bhatewara <sbhatewara@vmware.com>
Cc: "VMware, Inc." <pv-drivers@vmware.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
replace it by ndo_set_rx_mode
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The vmxnet3 driver enables vlan filters if filtering is enabled for
any vlan. In promiscuous mode the filter table is cleared to in
order to disable filtering. However, if a vlan device is subsequently
created that vlan will be added to the filter, re-engaging it. As a
result, not only do we not see all the vlans in promiscuous mode, we
don't even see vlans for which a filter was previously created.
CC: Scott J. Goldman <scottjg@vmware.com>
CC: Shreyas Bhatewara <sbhatewara@vmware.com>
CC: VMware PV-Drivers <pv-drivers@vmware.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
NETIF_F_HIGHDMA is being disabled even when dma64 is true. This patch fixes it.
CC: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Parent device for netdev should be set before netdev_info() can be called
otherwise there is a NULL pointer dereference and probe() fails.
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: Scott J. Goldman <scottjg@vmware.com>--
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
net/bluetooth/l2cap_core.c
|
|
vmxnet3 device supports only power-of-two number of queues. The driver
therefore needs to check this and rounds down the number of queues to the
nearest power of two.
Signed-off-by: Yong Wang <yongwang@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Reviewed-by: Dmitry Torokhov <dtor@vmware.com>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
|
|
If the rx ring is completely empty, then the device may never fire an rx
interrupt. Unfortunately, the rx interrupt is what triggers populating the
rx ring with fresh buffers, so this will cause networking to lock up.
This patch replenishes the skb in recv descriptor as soon as it is
peeled off while processing rx completions. If the skb/buffer
allocation fails, existing one is recycled and the packet in hand is
dropped. This way none of the RX desc is ever left empty, thus avoiding
starvation
Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When receiving packets from another guest on the same hypervisor, it's
generally possible to receive large packets because no segmentation is
necessary and these packets are handled by LRO. However, when doing
routing or bridging we must disable LRO and lose this benefit. In
these cases GRO can still be used and it is very effective because the
packets which are segmented in the hypervisor are received very close
together and can easily be merged.
CC: Shreyas Bhatewara <sbhatewara@vmware.com>
CC: Scott Goldman <scottjg@vmware.com>
CC: VMware PV-Drivers <pv-drivers@vmware.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This converts the vmxnet3 driver to use the new vlan model. In doing so
it fixes missing tags in tcpdump and failure to do checksum offload when
tx vlan offload is disabled.
CC: Shreyas Bhatewara <sbhatewara@vmware.com>
CC: VMware PV-Drivers <pv-drivers@vmware.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While doing some backporting I noticed that vmxnet3 had a variable that was set
but never used. Get rid of it, and stop the compiler from griping
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: "VMware, Inc." <pv-drivers@vmware.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>
|
|
Convert vmxnet3 driver to 64 bit statistics interface.
This driver was already counting packet per queue in a 64 bit value so not
a huge change. Eliminate unused old net_device_stats structure.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Resending this patch with few changes.
Avoid multiple queues when MSI or MSI-X not available
Limit number of Tx queues to 1 if MSI/MSI-X support is not configured in
the kernel. This will make number of tx and rx queues equal when MSI/X
is not configured thus providing better performance.
Signed-off-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-3.6
Conflicts:
drivers/net/benet/be_main.c
|
|
Using the vmxnet3 driver produces a lockdep warning because
vmxnet3_set_mc(), which is called with mc->mca_lock held, takes
adapter->cmd_lock. However, there are a couple of places where
adapter->cmd_lock is taken with softirqs enabled, lockdep warns that a
softirq that tries to take mc->mca_lock could happen while
adapter->cmd_lock is held, leading to an AB-BA deadlock.
I'm not sure if this is a real potential deadlock or not, but the
simplest and best fix seems to be simply to make sure we take cmd_lock
with spin_lock_irqsave() everywhere -- the places with plain spin_lock
just look like oversights.
The full enormous lockdep warning is:
=========================================================
[ INFO: possible irq lock inversion dependency detected ]
2.6.39-rc6+ #1
---------------------------------------------------------
ifconfig/567 just changed the state of lock:
(&(&mc->mca_lock)->rlock){+.-...}, at: [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
but this lock took another, SOFTIRQ-unsafe lock in the past:
(&(&adapter->cmd_lock)->rlock){+.+...}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
4 locks held by ifconfig/567:
#0: (rtnl_mutex){+.+.+.}, at: [<ffffffff8147d547>] rtnl_lock+0x17/0x20
#1: ((inetaddr_chain).rwsem){.+.+.+}, at: [<ffffffff810896cf>] __blocking_notifier_call_chain+0x5f/0xb0
#2: (&idev->mc_ifc_timer){+.-...}, at: [<ffffffff8106f21b>] run_timer_softirq+0xeb/0x3f0
#3: (&ndev->lock){++.-..}, at: [<ffffffff81531dd2>] mld_ifc_timer_expire+0x32/0x280
the shortest dependencies between 2nd lock and 1st lock:
-> (&(&adapter->cmd_lock)->rlock){+.+...} ops: 11 {
HARDIRQ-ON-W at:
[<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff81571156>] _raw_spin_lock+0x36/0x70
[<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
[<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
[<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
[<ffffffff812dfde9>] pci_device_probe+0x119/0x120
[<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
[<ffffffff81373fcb>] __driver_attach+0xab/0xb0
[<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
[<ffffffff81373a2e>] driver_attach+0x1e/0x20
[<ffffffff813735b8>] bus_add_driver+0xc8/0x290
[<ffffffff813745b6>] driver_register+0x76/0x140
[<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
[<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
[<ffffffff81002165>] do_one_initcall+0x45/0x190
[<ffffffff810aa76b>] sys_init_module+0xfb/0x250
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
SOFTIRQ-ON-W at:
[<ffffffff8109adb7>] __lock_acquire+0x827/0x1e10
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff81571156>] _raw_spin_lock+0x36/0x70
[<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
[<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
[<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
[<ffffffff812dfde9>] pci_device_probe+0x119/0x120
[<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
[<ffffffff81373fcb>] __driver_attach+0xab/0xb0
[<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
[<ffffffff81373a2e>] driver_attach+0x1e/0x20
[<ffffffff813735b8>] bus_add_driver+0xc8/0x290
[<ffffffff813745b6>] driver_register+0x76/0x140
[<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
[<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
[<ffffffff81002165>] do_one_initcall+0x45/0x190
[<ffffffff810aa76b>] sys_init_module+0xfb/0x250
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
INITIAL USE at:
[<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff81571156>] _raw_spin_lock+0x36/0x70
[<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
[<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
[<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
[<ffffffff812dfde9>] pci_device_probe+0x119/0x120
[<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
[<ffffffff81373fcb>] __driver_attach+0xab/0xb0
[<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
[<ffffffff81373a2e>] driver_attach+0x1e/0x20
[<ffffffff813735b8>] bus_add_driver+0xc8/0x290
[<ffffffff813745b6>] driver_register+0x76/0x140
[<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
[<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
[<ffffffff81002165>] do_one_initcall+0x45/0x190
[<ffffffff810aa76b>] sys_init_module+0xfb/0x250
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
}
... key at: [<ffffffffa0017590>] __key.42516+0x0/0xffffffffffffda70 [vmxnet3]
... acquired at:
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff81571bb5>] _raw_spin_lock_irqsave+0x55/0xa0
[<ffffffffa000de27>] vmxnet3_set_mc+0x97/0x1a0 [vmxnet3]
[<ffffffff8146ffa0>] __dev_set_rx_mode+0x40/0xb0
[<ffffffff81470040>] dev_set_rx_mode+0x30/0x50
[<ffffffff81470127>] __dev_open+0xc7/0x100
[<ffffffff814703c1>] __dev_change_flags+0xa1/0x180
[<ffffffff81470568>] dev_change_flags+0x28/0x70
[<ffffffff814da960>] devinet_ioctl+0x730/0x800
[<ffffffff814db508>] inet_ioctl+0x88/0xa0
[<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
[<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
[<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
[<ffffffff81188d01>] sys_ioctl+0x91/0xa0
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
-> (_xmit_ETHER){+.....} ops: 6 {
HARDIRQ-ON-W at:
[<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<ffffffff81475618>] __dev_mc_add+0x38/0x90
[<ffffffff814756a0>] dev_mc_add+0x10/0x20
[<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
[<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
[<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
[<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
[<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
[<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
[<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
[<ffffffff8146a944>] register_netdevice+0x244/0x2d0
[<ffffffff8146aa0f>] register_netdev+0x3f/0x60
[<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
[<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
[<ffffffff812dfde9>] pci_device_probe+0x119/0x120
[<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
[<ffffffff81373fcb>] __driver_attach+0xab/0xb0
[<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
[<ffffffff81373a2e>] driver_attach+0x1e/0x20
[<ffffffff813735b8>] bus_add_driver+0xc8/0x290
[<ffffffff813745b6>] driver_register+0x76/0x140
[<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
[<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
[<ffffffff81002165>] do_one_initcall+0x45/0x190
[<ffffffff810aa76b>] sys_init_module+0xfb/0x250
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
INITIAL USE at:
[<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<ffffffff81475618>] __dev_mc_add+0x38/0x90
[<ffffffff814756a0>] dev_mc_add+0x10/0x20
[<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
[<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
[<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
[<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
[<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
[<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
[<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
[<ffffffff8146a944>] register_netdevice+0x244/0x2d0
[<ffffffff8146aa0f>] register_netdev+0x3f/0x60
[<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
[<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
[<ffffffff812dfde9>] pci_device_probe+0x119/0x120
[<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
[<ffffffff81373fcb>] __driver_attach+0xab/0xb0
[<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
[<ffffffff81373a2e>] driver_attach+0x1e/0x20
[<ffffffff813735b8>] bus_add_driver+0xc8/0x290
[<ffffffff813745b6>] driver_register+0x76/0x140
[<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
[<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
[<ffffffff81002165>] do_one_initcall+0x45/0x190
[<ffffffff810aa76b>] sys_init_module+0xfb/0x250
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
}
... key at: [<ffffffff827fd868>] netdev_addr_lock_key+0x8/0x1e0
... acquired at:
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<ffffffff81475618>] __dev_mc_add+0x38/0x90
[<ffffffff814756a0>] dev_mc_add+0x10/0x20
[<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
[<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
[<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
[<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
[<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
[<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
[<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
[<ffffffff8146a944>] register_netdevice+0x244/0x2d0
[<ffffffff8146aa0f>] register_netdev+0x3f/0x60
[<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
[<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
[<ffffffff812dfde9>] pci_device_probe+0x119/0x120
[<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
[<ffffffff81373fcb>] __driver_attach+0xab/0xb0
[<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
[<ffffffff81373a2e>] driver_attach+0x1e/0x20
[<ffffffff813735b8>] bus_add_driver+0xc8/0x290
[<ffffffff813745b6>] driver_register+0x76/0x140
[<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
[<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
[<ffffffff81002165>] do_one_initcall+0x45/0x190
[<ffffffff810aa76b>] sys_init_module+0xfb/0x250
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
-> (&(&mc->mca_lock)->rlock){+.-...} ops: 6 {
HARDIRQ-ON-W at:
[<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0
[<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
[<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
[<ffffffff81ce0d16>] addrconf_init+0x4e/0x183
[<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6
[<ffffffff81002165>] do_one_initcall+0x45/0x190
[<ffffffff81ca4d3f>] kernel_init+0xe3/0x168
[<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10
IN-SOFTIRQ-W at:
[<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
[<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
[<ffffffff810666d0>] __do_softirq+0xc0/0x210
[<ffffffff8157b3dc>] call_softirq+0x1c/0x30
[<ffffffff8100d42d>] do_softirq+0xad/0xe0
[<ffffffff81066afe>] irq_exit+0x9e/0xb0
[<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
[<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
[<ffffffff8149d857>] rt_do_flush+0x87/0x2a0
[<ffffffff814a16b6>] rt_cache_flush+0x46/0x60
[<ffffffff814e36e0>] fib_disable_ip+0x40/0x60
[<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
[<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
[<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
[<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
[<ffffffff814d8223>] inet_del_ifa+0x13/0x20
[<ffffffff814da731>] devinet_ioctl+0x501/0x800
[<ffffffff814db508>] inet_ioctl+0x88/0xa0
[<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
[<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
[<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
[<ffffffff81188d01>] sys_ioctl+0x91/0xa0
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
INITIAL USE at:
[<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0
[<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
[<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
[<ffffffff81ce0d16>] addrconf_init+0x4e/0x183
[<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6
[<ffffffff81002165>] do_one_initcall+0x45/0x190
[<ffffffff81ca4d3f>] kernel_init+0xe3/0x168
[<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10
}
... key at: [<ffffffff82801be2>] __key.40877+0x0/0x8
... acquired at:
[<ffffffff810997bc>] check_usage_forwards+0x9c/0x110
[<ffffffff8109a32c>] mark_lock+0x19c/0x400
[<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
[<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
[<ffffffff810666d0>] __do_softirq+0xc0/0x210
[<ffffffff8157b3dc>] call_softirq+0x1c/0x30
[<ffffffff8100d42d>] do_softirq+0xad/0xe0
[<ffffffff81066afe>] irq_exit+0x9e/0xb0
[<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
[<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
[<ffffffff8149d857>] rt_do_flush+0x87/0x2a0
[<ffffffff814a16b6>] rt_cache_flush+0x46/0x60
[<ffffffff814e36e0>] fib_disable_ip+0x40/0x60
[<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
[<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
[<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
[<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
[<ffffffff814d8223>] inet_del_ifa+0x13/0x20
[<ffffffff814da731>] devinet_ioctl+0x501/0x800
[<ffffffff814db508>] inet_ioctl+0x88/0xa0
[<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
[<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
[<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
[<ffffffff81188d01>] sys_ioctl+0x91/0xa0
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
stack backtrace:
Pid: 567, comm: ifconfig Not tainted 2.6.39-rc6+ #1
Call Trace:
<IRQ> [<ffffffff810996f6>] print_irq_inversion_bug+0x146/0x170
[<ffffffff81099720>] ? print_irq_inversion_bug+0x170/0x170
[<ffffffff810997bc>] check_usage_forwards+0x9c/0x110
[<ffffffff8109a32c>] mark_lock+0x19c/0x400
[<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
[<ffffffff8109a383>] ? mark_lock+0x1f3/0x400
[<ffffffff8109b497>] ? __lock_acquire+0xf07/0x1e10
[<ffffffff81012255>] ? native_sched_clock+0x15/0x70
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280
[<ffffffff8109759d>] ? lock_release_holdtime+0x3d/0x1a0
[<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280
[<ffffffff8157170b>] ? _raw_spin_unlock+0x2b/0x40
[<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
[<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
[<ffffffff8106f21b>] ? run_timer_softirq+0xeb/0x3f0
[<ffffffff810122b9>] ? sched_clock+0x9/0x10
[<ffffffff81531da0>] ? mld_gq_timer_expire+0x30/0x30
[<ffffffff810666d0>] __do_softirq+0xc0/0x210
[<ffffffff8109455f>] ? tick_program_event+0x1f/0x30
[<ffffffff8157b3dc>] call_softirq+0x1c/0x30
[<ffffffff8100d42d>] do_softirq+0xad/0xe0
[<ffffffff81066afe>] irq_exit+0x9e/0xb0
[<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
[<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
<EOI> [<ffffffff81571f14>] ? retint_restore_args+0x13/0x13
[<ffffffff810974a7>] ? lock_is_held+0x17/0xd0
[<ffffffff8149d857>] rt_do_flush+0x87/0x2a0
[<ffffffff814a16b6>] rt_cache_flush+0x46/0x60
[<ffffffff814e36e0>] fib_disable_ip+0x40/0x60
[<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
[<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
[<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
[<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
[<ffffffff814d8223>] inet_del_ifa+0x13/0x20
[<ffffffff814da731>] devinet_ioctl+0x501/0x800
[<ffffffff8108a3af>] ? local_clock+0x6f/0x80
[<ffffffff81575898>] ? do_page_fault+0x268/0x560
[<ffffffff814db508>] inet_ioctl+0x88/0xa0
[<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
[<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
[<ffffffff810dfe87>] ? __call_rcu+0xa7/0x190
[<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
[<ffffffff8117737e>] ? fget_light+0x33e/0x430
[<ffffffff81571ef9>] ? retint_swapgs+0x13/0x1b
[<ffffffff81188d01>] sys_ioctl+0x91/0xa0
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This also removes private feature flags that were always set to true.
You may want to move vmxnet3_set_features() to vmxnet3_drv.c as a following
cleanup.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
|
In case of single tx and rx queues, three MSI-x vectors are allocated instead
of two. This patch fixes that.
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Access to cmd register is racey, especially in smp environments. Protect
it using a spinlock.
Signed-off-by: Matthieu Bucchianeri <matthieu@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a small possibility of a race where the suspend routine gets
called, while a napi callback is still pending and when that comes up,
it enables interrupts which just got disabled in the suspend routine.
This change adds napi disable call in suspend and enable in resume to
avoid race.
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Acked-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a performance enhancement fix. vmxnet3 device performs better when
provided with at least 54 bytes (ethernet 14 + IP 20+ TCP 20) in the first SG
buffer. For UDP packets driver provides lesser than that in first sg. This
change fixes the same. Also avoid the redundant pskb_may_pull() call.
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make hw vlan tag stripping as enabled by default. Thereby remove
the code to conditionally enable it later.
Signed-off-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While activating the device get it's MAC address from netdev. This will allow
the MAC address configured using ifconfig to persist through the reset.
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a bug while changing ring size when MTU is changed.
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Acked-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Using static const generally increases object text and decreases data size.
It also generally decreases overall object size.
Signed-off-by: Joe Perches <joe@perches.com>
|
|
There were several paths that didn't release their locks.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some drivers are using skb_transport_offset(skb) instead of skb->csum_start
for NETIF_F_HW_CSUM offload. This does not matter now, but if someone
implements checksumming of encapsulated packets then this will break silently.
TSO output paths are left as they are, since they are for IP+TCP only
(might be worth converting though).
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
flush_scheduled_work() is on its way out. This patch contains simple
conversions to replace flush_scheduled_work() usage with direct
cancels and flushes.
Directly cancel the used works on driver detach and flush them in
other cases.
The conversions are mostly straight forward and the only dangers are,
* Forgetting to cancel/flush one or more used works.
* Cancelling when a work should be flushed (ie. the work must be
executed once scheduled whether the driver is detaching or not).
I've gone over the changes multiple times but it would be much
appreciated if you can review with the above points in mind.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jay Cliburn <jcliburn@gmail.com>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Divy Le Ray <divy@chelsio.com>
Cc: e1000-devel@lists.sourceforge.net
Cc: Vasanthy Kolluri <vkolluri@cisco.com>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Andrew Gallatin <gallatin@myri.com>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Cc: Ramkrishna Vepa <ramkrishna.vepa@exar.com>
Cc: Matt Carlson <mcarlson@broadcom.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Shreyas Bhatewara <sbhatewara@vmware.com>
Cc: netdev@vger.kernel.org
|
|
Add multiqueue support to vmxnet3 driver
This change adds multiqueue and thus receive side scaling support
to vmxnet3 device driver. Number of rx queues is limited to 1 in cases
where MSI is not configured or one MSIx vector is not available per rx
queue
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Reviewed-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Noticed by sparse:
drivers/net/vmxnet3/vmxnet3_drv.c:876:38: warning: cast from restricted __be16
drivers/net/vmxnet3/vmxnet3_drv.c:876:38: warning: cast from restricted __be16
drivers/net/vmxnet3/vmxnet3_drv.c:876:24: warning: restricted __be16 degrades to integer
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's a le64, not a le32, typo in one place only.
Noticed by sparse:
drivers/net/vmxnet3/vmxnet3_drv.c:2668:52: warning: incorrect type in assignment (different base types)
drivers/net/vmxnet3/vmxnet3_drv.c:2668:52: expected restricted __le64 [usertype] confPA
drivers/net/vmxnet3/vmxnet3_drv.c:2668:52: got restricted __le32 [usertype] <noident>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's easier to just annotate the constants as little endian types and set/clear
the flags directly.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Gcc doesn't usually handle inline across compilation units, and the
functions don't have to be global in scope. Move the set/reset flag
functions int the existing vmxnet3 header.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
VLAN_GROUP_ARRAY_LEN is simply the number of possible vlan VIDs.
Since vlan groups will soon be more of an implementation detail
for vlan devices, rename the constant to be descriptive of its
actual purpose.
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
fresh skbs have ip_summed set to CHECKSUM_NONE (0)
We can avoid setting again skb->ip_summed to CHECKSUM_NONE in drivers.
Introduce skb_checksum_none_assert() helper so that we keep this
assertion documented in driver sources.
Change most occurrences of :
skb->ip_summed = CHECKSUM_NONE;
by :
skb_checksum_none_assert(skb);
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix an overflow bug in vmxnet3 Tx descriptor
This patch fixes a bug where a 16K buffer on a Tx descriptor was overflowing
into the 'gen' bit in the descriptor thereby corrupting the descriptor and
stalling the transmit ring.
Signed-off-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: Matthew Delco <delcoM@vmware.com>
Signed-off-by: Ronghua Zhang <ronghua@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Respect the interrupt type set in VM configuration.
When interrupt type is not auto, do not ignore the interrupt type set from
VM configuration.
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hold rtnl_lock to get the right link state.
While asynchronously resetting the device, hold rtnl_lock to get the
right value from netif_running. If a reset is scheduled, and the device
goes thru close and open, it may happen that reset and open may run in
parallel. Holding rtnl_lock will avoid this.
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change initializes the state of link at the time when driver is
loaded. The ethtool output for 'link detected' and 'link speed'
is thus valid even before the interface is brought up.
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A new bit map 'intrCtrl' is introduced in the DriverShared area. The
driver should update VMXNET3_IC_DISABLE_ALL bit before writing IMR.
Signed-off-by: Ronghua Zang <ronghua@vmware.com>
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use kzalloc rather than the combination of kmalloc and memset.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,size,flags;
statement S;
@@
-x = kmalloc(size,flags);
+x = kzalloc(size,flags);
if (x == NULL) S
-memset(x, 0, size);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
