summaryrefslogtreecommitdiff
path: root/drivers/net/usb
AgeCommit message (Collapse)AuthorFilesLines
5 daysnet: usb: pegasus: fix memory leak in update_eth_regs_async()Petko Manolov1-0/+2
[ Upstream commit afa27621a28af317523e0836dad430bec551eb54 ] When asynchronously writing to the device registers and if usb_submit_urb() fail, the code fail to release allocated to this point resources. Fixes: 323b34963d11 ("drivers: net: usb: pegasus: fix control urb submission") Signed-off-by: Petko Manolov <petkan@nucleusys.com> Link: https://patch.msgid.link/20260106084821.3746677-1-petko.manolov@konsulko.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
5 daysnet: usb: sr9700: fix incorrect command used to write single registerEthan Nelson-Moore1-2/+2
commit fa0b198be1c6775bc7804731a43be5d899d19e7a upstream. This fixes the device failing to initialize with "error reading MAC address" for me, probably because the incorrect write of NCR_RST to SR_NCR is not actually resetting the device. Fixes: c9b37458e95629b1d1171457afdcc1bf1eb7881d ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support") Cc: stable@vger.kernel.org Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com> Link: https://patch.msgid.link/20251221082400.50688-1-enelsonmoore@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysnet: usb: rtl8150: fix memory leak on usb_submit_urb() failureDeepakkumar Karn1-0/+2
[ Upstream commit 12cab1191d9890097171156d06bfa8d31f1e39c8 ] In async_set_registers(), when usb_submit_urb() fails, the allocated async_req structure and URB are not freed, causing a memory leak. The completion callback async_set_reg_cb() is responsible for freeing these allocations, but it is only called after the URB is successfully submitted and completes (successfully or with error). If submission fails, the callback never runs and the memory is leaked. Fix this by freeing both the URB and the request structure in the error path when usb_submit_urb() fails. Reported-by: syzbot+8dd915c7cb0490fc8c52@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=8dd915c7cb0490fc8c52 Fixes: 4d12997a9bb3 ("drivers: net: usb: rtl8150: concurrent URB bugfix") Signed-off-by: Deepakkumar Karn <dkarn@redhat.com> Link: https://patch.msgid.link/20251216151304.59865-2-dkarn@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07net: usb: qmi_wwan: initialize MAC header offset in qmimux_rx_fixupQendrim Maxhuni1-0/+6
[ Upstream commit e120f46768d98151ece8756ebd688b0e43dc8b29 ] Raw IP packets have no MAC header, leaving skb->mac_header uninitialized. This can trigger kernel panics on ARM64 when xfrm or other subsystems access the offset due to strict alignment checks. Initialize the MAC header to prevent such crashes. This can trigger kernel panics on ARM when running IPsec over the qmimux0 interface. Example trace: Internal error: Oops: 000000009600004f [#1] SMP CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.34-gbe78e49cb433 #1 Hardware name: LS1028A RDB Board (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : xfrm_input+0xde8/0x1318 lr : xfrm_input+0x61c/0x1318 sp : ffff800080003b20 Call trace: xfrm_input+0xde8/0x1318 xfrm6_rcv+0x38/0x44 xfrm6_esp_rcv+0x48/0xa8 ip6_protocol_deliver_rcu+0x94/0x4b0 ip6_input_finish+0x44/0x70 ip6_input+0x44/0xc0 ipv6_rcv+0x6c/0x114 __netif_receive_skb_one_core+0x5c/0x8c __netif_receive_skb+0x18/0x60 process_backlog+0x78/0x17c __napi_poll+0x38/0x180 net_rx_action+0x168/0x2f0 Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Signed-off-by: Qendrim Maxhuni <qendrim.maxhuni@garderos.com> Link: https://patch.msgid.link/20251029075744.105113-1-qendrim.maxhuni@garderos.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07usbnet: Prevents free active keventLizhi Xu1-0/+2
[ Upstream commit 420c84c330d1688b8c764479e5738bbdbf0a33de ] The root cause of this issue are: 1. When probing the usbnet device, executing usbnet_link_change(dev, 0, 0); put the kevent work in global workqueue. However, the kevent has not yet been scheduled when the usbnet device is unregistered. Therefore, executing free_netdev() results in the "free active object (kevent)" error reported here. 2. Another factor is that when calling usbnet_disconnect()->unregister_netdev(), if the usbnet device is up, ndo_stop() is executed to cancel the kevent. However, because the device is not up, ndo_stop() is not executed. The solution to this problem is to cancel the kevent before executing free_netdev(). Fixes: a69e617e533e ("usbnet: Fix linkwatch use-after-free on disconnect") Reported-by: Sam Sun <samsun1006219@gmail.com> Closes: https://syzkaller.appspot.com/bug?extid=8bfd7bcc98f7300afb84 Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com> Link: https://patch.msgid.link/20251022024007.1831898-1-lizhi.xu@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07net: usb: asix_devices: Check return value of usbnet_get_endpointsMiaoqian Lin1-3/+9
commit dc89548c6926d68dfdda11bebc1a5258bc41d887 upstream. The code did not check the return value of usbnet_get_endpoints. Add checks and return the error if it fails to transfer the error. Found via static anlaysis and this is similar to commit 07161b2416f7 ("sr9800: Add check for usbnet_get_endpoints"). Fixes: 933a27d39e0e ("USB: asix - Add AX88178 support and many other changes") Fixes: 2e55cc7210fe ("[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters") Cc: stable@vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://patch.msgid.link/20251026164318.57624-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-29net: usb: rtl8150: Fix frame paddingMichal Pecio1-2/+9
commit 75cea9860aa6b2350d90a8d78fed114d27c7eca2 upstream. TX frames aren't padded and unknown memory is sent into the ether. Theoretically, it isn't even guaranteed that the extra memory exists and can be sent out, which could cause further problems. In practice, I found that plenty of tailroom exists in the skb itself (in my test with ping at least) and skb_padto() easily succeeds, so use it here. In the event of -ENOMEM drop the frame like other drivers do. The use of one more padding byte instead of a USB zero-length packet is retained to avoid regression. I have a dodgy Etron xHCI controller which doesn't seem to support sending ZLPs at all. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251014203528.3f9783c4.michal.pecio@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-29net: usb: lan78xx: fix use of improperly initialized dev->chipid in ↵I Viswanath1-4/+4
lan78xx_reset [ Upstream commit 8d93ff40d49d70e05c82a74beae31f883fe0eaf8 ] dev->chipid is used in lan78xx_init_mac_address before it's initialized: lan78xx_reset() { lan78xx_init_mac_address() lan78xx_read_eeprom() lan78xx_read_raw_eeprom() <- dev->chipid is used here dev->chipid = ... <- dev->chipid is initialized correctly here } Reorder initialization so that dev->chipid is set before calling lan78xx_init_mac_address(). Fixes: a0db7d10b76e ("lan78xx: Add to handle mux control per chip id") Signed-off-by: I Viswanath <viswanathiyyappan@gmail.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Khalid Aziz <khalid@kernel.org> Link: https://patch.msgid.link/20251013181648.35153-1-viswanathiyyappan@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-29net: usb: lan78xx: Add error handling to lan78xx_init_mac_addressOleksij Rempel1-8/+28
[ Upstream commit 6f31135894ec96481e2bda93a1da70712f5e57c1 ] Convert `lan78xx_init_mac_address` to return error codes and handle failures in register read and write operations. Update `lan78xx_reset` to check for errors during MAC address initialization and propagate them appropriately. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241209130751.703182-3-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 8d93ff40d49d ("net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-29net: usb: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski5-6/+6
[ Upstream commit af804e6db9f60b923ff5149d9bf782e0baa82a2b ] Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Convert net/usb from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 8d93ff40d49d ("net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-29net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicastI Viswanath1-2/+0
[ Upstream commit 958baf5eaee394e5fd976979b0791a875f14a179 ] syzbot reported WARNING in rtl8150_start_xmit/usb_submit_urb. This is the sequence of events that leads to the warning: rtl8150_start_xmit() { netif_stop_queue(); usb_submit_urb(dev->tx_urb); } rtl8150_set_multicast() { netif_stop_queue(); netif_wake_queue(); <-- wakes up TX queue before URB is done } rtl8150_start_xmit() { netif_stop_queue(); usb_submit_urb(dev->tx_urb); <-- double submission } rtl8150_set_multicast being the ndo_set_rx_mode callback should not be calling netif_stop_queue and notif_start_queue as these handle TX queue synchronization. The net core function dev_set_rx_mode handles the synchronization for rtl8150_set_multicast making it safe to remove these locks. Reported-and-tested-by: syzbot+78cae3f37c62ad092caa@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=78cae3f37c62ad092caa Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Tested-by: Michal Pecio <michal.pecio@gmail.com> Signed-off-by: I Viswanath <viswanathiyyappan@gmail.com> Link: https://patch.msgid.link/20250924134350.264597-1-viswanathiyyappan@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-04net: usb: qmi_wwan: add Telit Cinterion LE910C4-WWX new compositionsFabio Porcedda1-0/+3
commit e81a7f65288c7e2cfb7e7890f648e099fd885ab3 upstream. Add the following Telit Cinterion LE910C4-WWX new compositions: 0x1034: tty (AT) + tty (AT) + rmnet T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1034 Rev=00.00 S: Manufacturer=Telit S: Product=LE910C4-WWX S: SerialNumber=93f617e7 C: #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x1037: tty (diag) + tty (Telit custom) + tty (AT) + tty (AT) + rmnet T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 15 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1037 Rev=00.00 S: Manufacturer=Telit S: Product=LE910C4-WWX S: SerialNumber=93f617e7 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x1038: tty (Telit custom) + tty (AT) + tty (AT) + rmnet T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1038 Rev=00.00 S: Manufacturer=Telit S: Product=LE910C4-WWX S: SerialNumber=93f617e7 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Link: https://patch.msgid.link/20250822091324.39558-1-Fabio.Porcedda@telit.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28net: usbnet: Fix the wrong netif_carrier_on() callAmmar Faizi1-3/+3
commit 8466d393700f9ccef68134d3349f4e0a087679b9 upstream. The commit referenced in the Fixes tag causes usbnet to malfunction (identified via git bisect). Post-commit, my external RJ45 LAN cable fails to connect. Linus also reported the same issue after pulling that commit. The code has a logic error: netif_carrier_on() is only called when the link is already on. Fix this by moving the netif_carrier_on() call outside the if-statement entirely. This ensures it is always called when EVENT_LINK_CARRIER_ON is set and properly clears it regardless of the link state. Cc: stable@vger.kernel.org Cc: Armando Budianto <sprite@gnuweeb.org> Reviewed-by: Simon Horman <horms@kernel.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/all/CAHk-=wjqL4uF0MG_c8+xHX1Vv8==sPYQrtzbdA3kzi96284nuQ@mail.gmail.com Closes: https://lore.kernel.org/netdev/CAHk-=wjKh8X4PT_mU1kD4GQrbjivMfPn-_hXa6han_BTDcXddw@mail.gmail.com Closes: https://lore.kernel.org/netdev/0752dee6-43d6-4e1f-81d2-4248142cccd2@gnuweeb.org Fixes: 0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event") Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28net: usbnet: Avoid potential RCU stall on LINK_CHANGE eventJohn Ernberg1-3/+8
[ Upstream commit 0d9cfc9b8cb17dbc29a98792d36ec39a1cf1395f ] The Gemalto Cinterion PLS83-W modem (cdc_ether) is emitting confusing link up and down events when the WWAN interface is activated on the modem-side. Interrupt URBs will in consecutive polls grab: * Link Connected * Link Disconnected * Link Connected Where the last Connected is then a stable link state. When the system is under load this may cause the unlink_urbs() work in __handle_link_change() to not complete before the next usbnet_link_change() call turns the carrier on again, allowing rx_submit() to queue new SKBs. In that event the URB queue is filled faster than it can drain, ending up in a RCU stall: rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-.... } 33108 jiffies s: 201 root: 0x1/. rcu: blocking rcu_node structures (internal RCU debug): Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 Call trace: arch_local_irq_enable+0x4/0x8 local_bh_enable+0x18/0x20 __netdev_alloc_skb+0x18c/0x1cc rx_submit+0x68/0x1f8 [usbnet] rx_alloc_submit+0x4c/0x74 [usbnet] usbnet_bh+0x1d8/0x218 [usbnet] usbnet_bh_tasklet+0x10/0x18 [usbnet] tasklet_action_common+0xa8/0x110 tasklet_action+0x2c/0x34 handle_softirqs+0x2cc/0x3a0 __do_softirq+0x10/0x18 ____do_softirq+0xc/0x14 call_on_irq_stack+0x24/0x34 do_softirq_own_stack+0x18/0x20 __irq_exit_rcu+0xa8/0xb8 irq_exit_rcu+0xc/0x30 el1_interrupt+0x34/0x48 el1h_64_irq_handler+0x14/0x1c el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x38/0x48 xhci_urb_dequeue+0x1ac/0x45c [xhci_hcd] unlink1+0xd4/0xdc [usbcore] usb_hcd_unlink_urb+0x70/0xb0 [usbcore] usb_unlink_urb+0x24/0x44 [usbcore] unlink_urbs.constprop.0.isra.0+0x64/0xa8 [usbnet] __handle_link_change+0x34/0x70 [usbnet] usbnet_deferred_kevent+0x1c0/0x320 [usbnet] process_scheduled_works+0x2d0/0x48c worker_thread+0x150/0x1dc kthread+0xd8/0xe8 ret_from_fork+0x10/0x20 Get around the problem by delaying the carrier on to the scheduled work. This needs a new flag to keep track of the necessary action. The carrier ok check cannot be removed as it remains required for the LINK_RESET event flow. Fixes: 4b49f58fff00 ("usbnet: handle link change") Cc: stable@vger.kernel.org Signed-off-by: John Ernberg <john.ernberg@actia.se> Link: https://patch.msgid.link/20250723102526.1305339-1-john.ernberg@actia.se Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ adjust context in header ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28usb: net: sierra: check for no status endpointOliver Neukum1-0/+4
[ Upstream commit 4c4ca3c46167518f8534ed70f6e3b4bf86c4d158 ] The driver checks for having three endpoints and having bulk in and out endpoints, but not that the third endpoint is interrupt input. Rectify the omission. Reported-by: syzbot+3f89ec3d1d0842e95d50@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/686d5a9f.050a0220.1ffab7.0017.GAE@google.com/ Tested-by: syzbot+3f89ec3d1d0842e95d50@syzkaller.appspotmail.com Fixes: eb4fd8cd355c8 ("net/usb: add sierra_net.c driver") Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/20250714111326.258378-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-17net: usb: qmi_wwan: add SIMCom 8230C compositionXiaowei Li1-0/+1
[ Upstream commit 0b39b055b5b48cbbdf5746a1ca6e3f6b0221e537 ] Add support for SIMCom 8230C which is based on Qualcomm SDX35 chip. 0x9071: tty (DM) + tty (NMEA) + tty (AT) + rmnet T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9071 Rev= 5.15 S: Manufacturer=SIMCOM S: Product=SDXBAAGHA-IDP _SN:D744C4C5 S: SerialNumber=0123456789ABCDEF C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=none E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Xiaowei Li <xiaowei.li@simcom.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://patch.msgid.link/tencent_21D781FAA4969FEACA6ABB460362B52C9409@qq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27net: ch9200: fix uninitialised access during mii_nway_restartQasim Ijaz1-2/+5
commit 9ad0452c0277b816a435433cca601304cfac7c21 upstream. In mii_nway_restart() the code attempts to call mii->mdio_read which is ch9200_mdio_read(). ch9200_mdio_read() utilises a local buffer called "buff", which is initialised with control_read(). However "buff" is conditionally initialised inside control_read(): if (err == size) { memcpy(data, buf, size); } If the condition of "err == size" is not met, then "buff" remains uninitialised. Once this happens the uninitialised "buff" is accessed and returned during ch9200_mdio_read(): return (buff[0] | buff[1] << 8); The problem stems from the fact that ch9200_mdio_read() ignores the return value of control_read(), leading to uinit-access of "buff". To fix this we should check the return value of control_read() and return early on error. Reported-by: syzbot <syzbot+3361c2d6f78a3e0892f9@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=3361c2d6f78a3e0892f9 Tested-by: syzbot <syzbot+3361c2d6f78a3e0892f9@syzkaller.appspotmail.com> Fixes: 4a476bd6d1d9 ("usbnet: New driver for QinHeng CH9200 devices") Cc: stable@vger.kernel.org Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Link: https://patch.msgid.link/20250526183607.66527-1-qasdev00@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27net: usb: aqc111: debug info before sanitationOliver Neukum1-4/+4
commit d3faab9b5a6a0477d69c38bd11c43aa5e936f929 upstream. If we sanitize error returns, the debug statements need to come before that so that we don't lose information. Signed-off-by: Oliver Neukum <oneukum@suse.com> Fixes: 405b0d610745 ("net: usb: aqc111: fix error handling of usbnet read calls") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27net: usb: aqc111: fix error handling of usbnet read callsNikita Zhandarovich1-2/+8
[ Upstream commit 405b0d610745fb5e84fc2961d9b960abb9f3d107 ] Syzkaller, courtesy of syzbot, identified an error (see report [1]) in aqc111 driver, caused by incomplete sanitation of usb read calls' results. This problem is quite similar to the one fixed in commit 920a9fa27e78 ("net: asix: add proper error handling of usb read errors"). For instance, usbnet_read_cmd() may read fewer than 'size' bytes, even if the caller expected the full amount, and aqc111_read_cmd() will not check its result properly. As [1] shows, this may lead to MAC address in aqc111_bind() being only partly initialized, triggering KMSAN warnings. Fix the issue by verifying that the number of bytes read is as expected and not less. [1] Partial syzbot report: BUG: KMSAN: uninit-value in is_valid_ether_addr include/linux/etherdevice.h:208 [inline] BUG: KMSAN: uninit-value in usbnet_probe+0x2e57/0x4390 drivers/net/usb/usbnet.c:1830 is_valid_ether_addr include/linux/etherdevice.h:208 [inline] usbnet_probe+0x2e57/0x4390 drivers/net/usb/usbnet.c:1830 usb_probe_interface+0xd01/0x1310 drivers/usb/core/driver.c:396 call_driver_probe drivers/base/dd.c:-1 [inline] really_probe+0x4d1/0xd90 drivers/base/dd.c:658 __driver_probe_device+0x268/0x380 drivers/base/dd.c:800 ... Uninit was stored to memory at: dev_addr_mod+0xb0/0x550 net/core/dev_addr_lists.c:582 __dev_addr_set include/linux/netdevice.h:4874 [inline] eth_hw_addr_set include/linux/etherdevice.h:325 [inline] aqc111_bind+0x35f/0x1150 drivers/net/usb/aqc111.c:717 usbnet_probe+0xbe6/0x4390 drivers/net/usb/usbnet.c:1772 usb_probe_interface+0xd01/0x1310 drivers/usb/core/driver.c:396 ... Uninit was stored to memory at: ether_addr_copy include/linux/etherdevice.h:305 [inline] aqc111_read_perm_mac drivers/net/usb/aqc111.c:663 [inline] aqc111_bind+0x794/0x1150 drivers/net/usb/aqc111.c:713 usbnet_probe+0xbe6/0x4390 drivers/net/usb/usbnet.c:1772 usb_probe_interface+0xd01/0x1310 drivers/usb/core/driver.c:396 call_driver_probe drivers/base/dd.c:-1 [inline] ... Local variable buf.i created at: aqc111_read_perm_mac drivers/net/usb/aqc111.c:656 [inline] aqc111_bind+0x221/0x1150 drivers/net/usb/aqc111.c:713 usbnet_probe+0xbe6/0x4390 drivers/net/usb/usbnet.c:1772 Reported-by: syzbot+3b6b9ff7b80430020c7b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=3b6b9ff7b80430020c7b Tested-by: syzbot+3b6b9ff7b80430020c7b@syzkaller.appspotmail.com Fixes: df2d59a2ab6c ("net: usb: aqc111: Add support for getting and setting of MAC address") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Link: https://patch.msgid.link/20250520113240.2369438-1-n.zhandarovich@fintech.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10net: usb: usbnet: restore usb%d name exception for local mac addressesDominique Martinet1-6/+15
commit 2ea396448f26d0d7d66224cb56500a6789c7ed07 upstream. commit 8a7d12d674ac ("net: usb: usbnet: fix name regression") assumed that local addresses always came from the kernel, but some devices hand out local mac addresses so we ended up with point-to-point devices with a mac set by the driver, renaming to eth%d when they used to be named usb%d. Userspace should not rely on device name, but for the sake of stability restore the local mac address check portion of the naming exception: point to point devices which either have no mac set by the driver or have a local mac handed out by the driver will keep the usb%d name. (some USB LTE modems are known to hand out a stable mac from the locally administered range; that mac appears to be random (different for mulitple devices) and can be reset with device-specific commands, so while such devices would benefit from getting a OUI reserved, we have to deal with these and might as well preserve the existing behavior to avoid breaking fragile openwrt configurations and such on upgrade.) Link: https://lkml.kernel.org/r/20241203130457.904325-1-asmadeus@codewreck.org Fixes: 8a7d12d674ac ("net: usb: usbnet: fix name regression") Cc: stable@vger.kernel.org Tested-by: Ahmed Naseef <naseefkm@gmail.com> Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/20250326-usbnet_rename-v2-1-57eb21fcff26@atmark-techno.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-10net: usb: qmi_wwan: add Telit Cinterion FE990B compositionFabio Porcedda1-0/+1
commit e8cdd91926aac2c53a23925c538ad4c44be4201f upstream. Add the following Telit Cinterion FE990B composition: 0x10b0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb usb-devices: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Link: https://patch.msgid.link/20250227112441.3653819-2-fabio.porcedda@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-10net: usb: qmi_wwan: add Telit Cinterion FN990B compositionFabio Porcedda1-0/+1
commit 9dba9a45f8ca64a7df32aada14c20a3153af1ac8 upstream. Add the following Telit Cinterion FN990B composition: 0x10d0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10d0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN990 S: SerialNumber=43b38f19 C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Link: https://patch.msgid.link/20250205171649.618162-3-fabio.porcedda@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13usbnet: gl620a: fix endpoint checking in genelink_bind()Nikita Zhandarovich1-3/+1
commit 1cf9631d836b289bd5490776551961c883ae8a4f upstream. Syzbot reports [1] a warning in usb_submit_urb() triggered by inconsistencies between expected and actually present endpoints in gl620a driver. Since genelink_bind() does not properly verify whether specified eps are in fact provided by the device, in this case, an artificially manufactured one, one may get a mismatch. Fix the issue by resorting to a usbnet utility function usbnet_get_endpoints(), usually reserved for this very problem. Check for endpoints and return early before proceeding further if any are missing. [1] Syzbot report: usb 5-1: Manufacturer: syz usb 5-1: SerialNumber: syz usb 5-1: config 0 descriptor?? gl620a 5-1:0.23 usb0: register 'gl620a' at usb-dummy_hcd.0-1, ... ------------[ cut here ]------------ usb 5-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 2 PID: 1841 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 Modules linked in: CPU: 2 UID: 0 PID: 1841 Comm: kworker/2:2 Not tainted 6.12.0-syzkaller-07834-g06afb0f36106 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: mld mld_ifc_work RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> usbnet_start_xmit+0x6be/0x2780 drivers/net/usb/usbnet.c:1467 __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3606 sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343 __dev_xmit_skb net/core/dev.c:3827 [inline] __dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4400 dev_queue_xmit include/linux/netdevice.h:3168 [inline] neigh_resolve_output net/core/neighbour.c:1514 [inline] neigh_resolve_output+0x5bc/0x950 net/core/neighbour.c:1494 neigh_output include/net/neighbour.h:539 [inline] ip6_finish_output2+0xb1b/0x2070 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0x3f9/0x1360 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x1f8/0x540 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] mld_sendpack+0x9f0/0x11d0 net/ipv6/mcast.c:1819 mld_send_cr net/ipv6/mcast.c:2120 [inline] mld_ifc_work+0x740/0xca0 net/ipv6/mcast.c:2651 process_one_work+0x9c5/0x1ba0 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Reported-by: syzbot+d693c07c6f647e0388d3@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d693c07c6f647e0388d3 Fixes: 47ee3051c856 ("[PATCH] USB: usbnet (5/9) module for genesys gl620a cables") Cc: stable@vger.kernel.org Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Link: https://patch.msgid.link/20250224172919.1220522-1-n.zhandarovich@fintech.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13net: usb: rtl8150: enable basic endpoint checkingNikita Zhandarovich1-0/+22
[ Upstream commit 90b7f2961798793275b4844348619b622f983907 ] Syzkaller reports [1] encountering a common issue of utilizing a wrong usb endpoint type during URB submitting stage. This, in turn, triggers a warning shown below. For now, enable simple endpoint checking (specifically, bulk and interrupt eps, testing control one is not essential) to mitigate the issue with a view to do other related cosmetic changes later, if they are necessary. [1] Syzkaller report: usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 1 PID: 2586 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 driv> Modules linked in: CPU: 1 UID: 0 PID: 2586 Comm: dhcpcd Not tainted 6.11.0-rc4-syzkaller-00069-gfc88bb11617> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 Code: 84 3c 02 00 00 e8 05 e4 fc fc 4c 89 ef e8 fd 25 d7 fe 45 89 e0 89 e9 4c 89 f2 48 8> RSP: 0018:ffffc9000441f740 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff888112487a00 RCX: ffffffff811a99a9 RDX: ffff88810df6ba80 RSI: ffffffff811a99b6 RDI: 0000000000000001 RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 R13: ffff8881023bf0a8 R14: ffff888112452a20 R15: ffff888112487a7c FS: 00007fc04eea5740(0000) GS:ffff8881f6300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0a1de9f870 CR3: 000000010dbd0000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rtl8150_open+0x300/0xe30 drivers/net/usb/rtl8150.c:733 __dev_open+0x2d4/0x4e0 net/core/dev.c:1474 __dev_change_flags+0x561/0x720 net/core/dev.c:8838 dev_change_flags+0x8f/0x160 net/core/dev.c:8910 devinet_ioctl+0x127a/0x1f10 net/ipv4/devinet.c:1177 inet_ioctl+0x3aa/0x3f0 net/ipv4/af_inet.c:1003 sock_do_ioctl+0x116/0x280 net/socket.c:1222 sock_ioctl+0x22e/0x6c0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x193/0x220 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc04ef73d49 ... This change has not been tested on real hardware. Reported-and-tested-by: syzbot+d7e968426f644b567e31@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d7e968426f644b567e31 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Link: https://patch.msgid.link/20250124093020.234642-1-n.zhandarovich@fintech.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13net: usb: rtl8150: use new tasklet APIEmil Renner Berthing1-3/+3
[ Upstream commit 1999ad32d4ff00581007543adffc465694b2e77b ] This converts the driver to use the new tasklet API introduced in commit 12cc923f1ccc ("tasklet: Introduce new initialization API") Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-09net: usb: qmi_wwan: add Telit FE910C04 compositionsDaniele Palmas1-0/+3
[ Upstream commit 3b58b53a26598209a7ad8259a5114ce71f7c3d64 ] Add the following Telit FE910C04 compositions: 0x10c0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c4: rmnet + tty (AT) + tty (AT) + tty (diag) T: Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c4 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c8: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c8 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://patch.msgid.link/20241209151821.3688829-1-dnlplm@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14net: usb: lan78xx: Fix refcounting and autosuspend on invalid WoL configurationOleksij Rempel1-3/+3
[ Upstream commit e863ff806f72098bccaf8fa89c80d9ad6187c3b0 ] Validate Wake-on-LAN (WoL) options in `lan78xx_set_wol` before calling `usb_autopm_get_interface`. This prevents USB autopm refcounting issues and ensures the adapter can properly enter autosuspend when invalid WoL options are provided. Fixes: eb9ad088f966 ("lan78xx: Check for supported Wake-on-LAN modes") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://patch.msgid.link/20241118140351.2398166-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14net: usb: lan78xx: Fix memory leak on device unplug by freeing PHY deviceOleksij Rempel1-1/+4
[ Upstream commit ae7370e61c5d8f5bcefc2d4fca724bd4e9bbf789 ] Add calls to `phy_device_free` after `fixed_phy_unregister` to fix a memory leak that occurs when the device is unplugged. This ensures proper cleanup of pseudo fixed-link PHYs. Fixes: 89b36fb5e532 ("lan78xx: Lan7801 Support for Fixed PHY") Cc: Raghuram Chary J <raghuramchary.jallipalli@microchip.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20241116130558.1352230-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14net: usb: qmi_wwan: add Quectel RG650VBenoît Monin1-0/+1
[ Upstream commit 6b3f18a76be6bbd237c7594cf0bf2912b68084fe ] Add support for Quectel RG650V which is based on Qualcomm SDX65 chip. The composition is DIAG / NMEA / AT / AT / QMI. T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2c7c ProdID=0122 Rev=05.15 S: Manufacturer=Quectel S: Product=RG650V-EU S: SerialNumber=xxxxxxx C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=9ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=9ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=9ms Signed-off-by: Benoît Monin <benoit.monin@gmx.fr> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241024151113.53203-1-benoit.monin@gmx.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-17net: usb: qmi_wwan: add Fibocom FG132 0x0112 compositionReinhard Speyerer1-0/+1
[ Upstream commit 64761c980cbf71fb7a532a8c7299907ea972a88c ] Add Fibocom FG132 0x0112 composition: T: Bus=03 Lev=02 Prnt=06 Port=01 Cnt=02 Dev#= 10 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0112 Rev= 5.15 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom Module S: SerialNumber=xxxxxxxx C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Link: https://patch.msgid.link/ZxLKp5YZDy-OM0-e@arcor.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-08net: usb: usbnet: fix name regressionOliver Neukum1-1/+2
[ Upstream commit 8a7d12d674ac6f2147c18f36d1e15f1a48060edf ] The fix for MAC addresses broke detection of the naming convention because it gave network devices no random MAC before bind() was called. This means that the check for the local assignment bit was always negative as the address was zeroed from allocation, instead of from overwriting the MAC with a unique hardware address. The correct check for whether bind() has altered the MAC is done with is_zero_ether_addr Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: Greg Thelen <gthelen@google.com> Diagnosed-by: John Sperbeck <jsperbeck@google.com> Fixes: bab8eb0dd4cb9 ("usbnet: modern method to get random MAC") Link: https://patch.msgid.link/20241017071849.389636-1-oneukum@suse.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17usbnet: ipheth: fix carrier detection in modes 1 and 4Foster Snowhill1-2/+3
[ Upstream commit 67927a1b255d883881be9467508e0af9a5e0be9d ] Apart from the standard "configurations", "interfaces" and "alternate interface settings" in USB, iOS devices also have a notion of "modes". In different modes, the device exposes a different set of available configurations. Depending on the iOS version, and depending on the current mode, the length and contents of the carrier state control message differs: * 1 byte (seen on iOS 4.2.1, 8.4): * 03: carrier off (mode 0) * 04: carrier on (mode 0) * 3 bytes (seen on iOS 10.3.4, 15.7.6): * 03 03 03: carrier off (mode 0) * 04 04 03: carrier on (mode 0) * 4 bytes (seen on iOS 16.5, 17.6): * 03 03 03 00: carrier off (mode 0) * 04 03 03 00: carrier off (mode 1) * 06 03 03 00: carrier off (mode 4) * 04 04 03 04: carrier on (mode 0 and 1) * 06 04 03 04: carrier on (mode 4) Before this change, the driver always used the first byte of the response to determine carrier state. From this larger sample, the first byte seems to indicate the number of available USB configurations in the current mode (with the exception of the default mode 0), and in some cases (namely mode 1 and 4) does not correlate with the carrier state. Previous logic erroneously counted `04 03 03 00` as "carrier on" and `06 04 03 04` as "carrier off" on iOS versions that support mode 1 and mode 4 respectively. Only modes 0, 1 and 4 expose the USB Ethernet interfaces necessary for the ipheth driver. Check the second byte of the control message where possible, and fall back to checking the first byte on older iOS versions. Signed-off-by: Foster Snowhill <forst@pen.gy> Tested-by: Georgi Valkov <gvalkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12usbnet: ipheth: race between ipheth_close and error handlingOliver Neukum1-1/+1
[ Upstream commit e5876b088ba03a62124266fa20d00e65533c7269 ] ipheth_sndbulk_callback() can submit carrier_work as a part of its error handling. That means that the driver must make sure that the work is cancelled after it has made sure that no more URB can terminate with an error condition. Hence the order of actions in ipheth_close() needs to be inverted. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Foster Snowhill <forst@pen.gy> Tested-by: Georgi Valkov <gvalkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12usbnet: modern method to get random MACOliver Neukum1-8/+3
[ Upstream commit bab8eb0dd4cb995caa4a0529d5655531c2ec5e8e ] The driver generates a random MAC once on load and uses it over and over, including on two devices needing a random MAC at the same time. Jakub suggested revamping the driver to the modern API for setting a random MAC rather than fixing the old stuff. The bug is as old as the driver. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://patch.msgid.link/20240829175201.670718-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12net: usb: don't write directly to netdev->dev_addrJakub Kicinski8-13/+24
[ Upstream commit 2674e7ea22ba0e22a2d1603bd51e0b8f6442a267 ] Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Manually fix all net/usb drivers without separate maintainers. v2: catc does DMA to the buffer, leave the conversion to Oliver Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: bab8eb0dd4cb ("usbnet: modern method to get random MAC") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12drivers/net/usb: Remove all strcpy() usesLen Baker2-5/+5
[ Upstream commit 493c3ca6bd754d8587604496eb814f72e933075d ] strcpy() performs no bounds checking on the destination buffer. This could result in linear overflows beyond the end of the buffer, leading to all kinds of misbehaviors. The safe replacement is strscpy(). Signed-off-by: Len Baker <len.baker@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: bab8eb0dd4cb ("usbnet: modern method to get random MAC") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12net: usb: qmi_wwan: add MeiG Smart SRM825LZHANG Yuntian1-0/+1
[ Upstream commit 1ca645a2f74a4290527ae27130c8611391b07dbf ] Add support for MeiG Smart SRM825L which is based on Qualcomm 315 chip. T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2dee ProdID=4d22 Rev= 4.14 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=6f345e48 C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: ZHANG Yuntian <yt@radxa.com> Link: https://patch.msgid.link/D1EB81385E405DFE+20240803074656.567061-1-yt@radxa.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-19net: usb: qmi_wwan: fix memory leak for not ip packetsDaniele Palmas1-0/+1
[ Upstream commit 7ab107544b777c3bd7feb9fe447367d8edd5b202 ] Free the unused skb when not ip packets arrive. Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-19net: usb: sr9700: fix uninitialized variable use in sr_mdio_readMa Ke1-2/+9
commit 08f3a5c38087d1569e982a121aad1e6acbf145ce upstream. It could lead to error happen because the variable res is not updated if the call to sr_share_read_word returns an error. In this particular case error code was returned and res stayed uninitialized. Same issue also applies to sr_read_reg. This can be avoided by checking the return value of sr_share_read_word and sr_read_reg, and propagating the error if the read operation failed. Found by code review. Cc: stable@vger.kernel.org Fixes: c9b37458e956 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Reviewed-by: Shigeru Yoshida <syoshida@redhat.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-27net: usb: qmi_wwan: add Telit FN912 compositionsDaniele Palmas1-0/+2
[ Upstream commit 77453e2b015b5ced5b3f45364dd5a72dfc3bdecb ] Add the following Telit FN912 compositions: 0x3000: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=3000 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN912 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x3001: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=3001 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN912 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://patch.msgid.link/20240625102236.69539-1-dnlplm@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-05net: usb: ax88179_178a: improve link status logsJose Ignacio Tornos Martinez1-1/+5
commit 058722ee350c0bdd664e467156feb2bf5d9cc271 upstream. Avoid spurious link status logs that may ultimately be wrong; for example, if the link is set to down with the cable plugged, then the cable is unplugged and after this the link is set to up, the last new log that is appearing is incorrectly telling that the link is up. In order to avoid errors, show link status logs after link_reset processing, and in order to avoid spurious as much as possible, only show the link loss when some link status change is detected. cc: stable@vger.kernel.org Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-05net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettingsOliver Neukum1-1/+2
[ Upstream commit fba383985354e83474f95f36d7c65feb75dba19d ] This functions retrieves values by passing a pointer. As the function that retrieves them can fail before touching the pointers, the variables must be initialized. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+5186630949e3c55f0799@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20240619132816.11526-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-16net: usb: smsc95xx: fix changing LED_SEL bit value updated from EEPROMParthiban Veerasooran1-4/+7
[ Upstream commit 52a2f0608366a629d43dacd3191039c95fef74ba ] LED Select (LED_SEL) bit in the LED General Purpose IO Configuration register is used to determine the functionality of external LED pins (Speed Indicator, Link and Activity Indicator, Full Duplex Link Indicator). The default value for this bit is 0 when no EEPROM is present. If a EEPROM is present, the default value is the value of the LED Select bit in the Configuration Flags of the EEPROM. A USB Reset or Lite Reset (LRST) will cause this bit to be restored to the image value last loaded from EEPROM, or to be set to 0 if no EEPROM is present. While configuring the dual purpose GPIO/LED pins to LED outputs in the LED General Purpose IO Configuration register, the LED_SEL bit is changed as 0 and resulting the configured value from the EEPROM is cleared. The issue is fixed by using read-modify-write approach. Fixes: f293501c61c5 ("smsc95xx: configure LED outputs") Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Woojung Huh <woojung.huh@microchip.com> Link: https://lore.kernel.org/r/20240523085314.167650-1-Parthiban.Veerasooran@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-16net: usb: smsc95xx: stop lying about skb->truesizeEric Dumazet1-8/+7
[ Upstream commit d50729f1d60bca822ef6d9c1a5fb28d486bd7593 ] Some usb drivers try to set small skb->truesize and break core networking stacks. In this patch, I removed one of the skb->truesize override. I also replaced one skb_clone() by an allocation of a fresh and small skb, to get minimally sized skbs, like we did in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize in rx path") and 4ce62d5b2f7a ("net: usb: ax88179_178a: stop lying about skb->truesize") v3: also fix a sparse error ( https://lore.kernel.org/oe-kbuild-all/202405091310.KvncIecx-lkp@intel.com/ ) v2: leave the skb_trim() game because smsc95xx_rx_csum_offload() needs the csum part. (Jakub) While we are it, use get_unaligned() in smsc95xx_rx_csum_offload(). Fixes: 2f7ca802bdae ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steve Glendinning <steve.glendinning@shawell.net> Cc: UNGLinuxDriver@microchip.com Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240509083313.2113832-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-16net: usb: sr9700: stop lying about skb->truesizeEric Dumazet1-7/+3
[ Upstream commit 05417aa9c0c038da2464a0c504b9d4f99814a23b ] Some usb drivers set small skb->truesize and break core networking stacks. In this patch, I removed one of the skb->truesize override. I also replaced one skb_clone() by an allocation of a fresh and small skb, to get minimally sized skbs, like we did in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize in rx path") and 4ce62d5b2f7a ("net: usb: ax88179_178a: stop lying about skb->truesize") Fixes: c9b37458e956 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240506143939.3673865-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-16usb: aqc111: stop lying about skb->truesizeEric Dumazet1-5/+3
[ Upstream commit 9aad6e45c4e7d16b2bb7c3794154b828fb4384b4 ] Some usb drivers try to set small skb->truesize and break core networking stacks. I replace one skb_clone() by an allocation of a fresh and small skb, to get minimally sized skbs, like we did in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize in rx path") and 4ce62d5b2f7a ("net: usb: ax88179_178a: stop lying about skb->truesize") Fixes: 361459cd9642 ("net: usb: aqc111: Implement RX data path") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240506135546.3641185-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-16net: usb: qmi_wwan: add Telit FN920C04 compositionsDaniele Palmas1-0/+3
[ Upstream commit 0b8fe5bd73249dc20be2e88a12041f8920797b59 ] Add the following Telit FN920C04 compositions: 0x10a0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a4: rmnet + tty (AT) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a4 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a9: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a9 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17net:usb:qmi_wwan: support Rolling modulesVanillan Wang1-0/+1
[ Upstream commit d362046021ea122309da8c8e0b6850c792ca97b5 ] Update the qmi_wwan driver support for the Rolling LTE modules. - VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET interface for /Linux/Chrome OS) 0x0104: RMNET, diag, at, pipe Here are the outputs of usb-devices: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=0104 Rev=05.04 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=ba2eb033 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Vanillan Wang <vanillanwang@163.com> Link: https://lore.kernel.org/r/20240416120713.24777-1-vanillanwang@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02net: usb: ax88179_178a: stop lying about skb->truesizeEric Dumazet1-8/+3
[ Upstream commit 4ce62d5b2f7aecd4900e7d6115588ad7f9acccca ] Some usb drivers try to set small skb->truesize and break core networking stacks. In this patch, I removed one of the skb->truesize overide. I also replaced one skb_clone() by an allocation of a fresh and small skb, to get minimally sized skbs, like we did in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize in rx path") Fixes: f8ebb3ac881b ("net: usb: ax88179_178a: Fix packet receiving") Reported-by: shironeko <shironeko@tesaguri.club> Closes: https://lore.kernel.org/netdev/c110f41a0d2776b525930f213ca9715c@tesaguri.club/ Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jose Alonso <joalonsof@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240421193828.1966195-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27sr9800: Add check for usbnet_get_endpointsChen Ni1-1/+3
[ Upstream commit 07161b2416f740a2cb87faa5566873f401440a61 ] Add check for usbnet_get_endpoints() and return the error if it fails in order to transfer the error. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 19a38d8e0aa3 ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support") Link: https://lore.kernel.org/r/20240305075927.261284-1-nichen@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-24 19:23:01 +0300