summaryrefslogtreecommitdiff
path: root/drivers/net/usb/smsc95xx.c
AgeCommit message (Collapse)AuthorFilesLines
2022-01-14net: usb: Correct reset handling of smsc95xxMarkus Reichl1-1/+2
On boards with LAN9514 and no preconfigured MAC address we don't get an ip address from DHCP after commit a049a30fc27c ("net: usb: Correct PHY handling of smsc95xx") anymore. Adding an explicit reset before starting the phy fixes the issue. [1] https://lore.kernel.org/netdev/199eebbd6b97f52b9119c9fa4fd8504f8a34de18.camel@collabora.com/ From: Gabriel Hojda <ghojda@yo2urs.ro> Fixes: a049a30fc27c ("net: usb: Correct PHY handling of smsc95xx") Signed-off-by: Gabriel Hojda <ghojda@yo2urs.ro> Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-23net: usb: Correct PHY handling of smsc95xxMartyn Welch1-29/+26
The smsc95xx driver is dropping phy speed settings and causing a stack trace at device unbind: [  536.379147] smsc95xx 2-1:1.0 eth1: unregister 'smsc95xx' usb-ci_hdrc.2-1, smsc95xx USB 2.0 Ethernet [  536.425029] ------------[ cut here ]------------ [  536.429650] WARNING: CPU: 0 PID: 439 at fs/kernfs/dir.c:1535 kernfs_remove_by_name_ns+0xb8/0xc0 [  536.438416] kernfs: can not remove 'attached_dev', no directory [  536.444363] Modules linked in: xts dm_crypt dm_mod atmel_mxt_ts smsc95xx usbnet [  536.451748] CPU: 0 PID: 439 Comm: sh Tainted: G        W         5.15.0 #1 [  536.458636] Hardware name: Freescale i.MX53 (Device Tree Support) [  536.464735] Backtrace:  [  536.467190] [<80b1c904>] (dump_backtrace) from [<80b1cb48>] (show_stack+0x20/0x24) [  536.474787]  r7:000005ff r6:8035b294 r5:600f0013 r4:80d8af78 [  536.480449] [<80b1cb28>] (show_stack) from [<80b1f764>] (dump_stack_lvl+0x48/0x54) [  536.488035] [<80b1f71c>] (dump_stack_lvl) from [<80b1f788>] (dump_stack+0x18/0x1c) [  536.495620]  r5:00000009 r4:80d9b820 [  536.499198] [<80b1f770>] (dump_stack) from [<80124fac>] (__warn+0xfc/0x114) [  536.506187] [<80124eb0>] (__warn) from [<80b1d21c>] (warn_slowpath_fmt+0xa8/0xdc) [  536.513688]  r7:000005ff r6:80d9b820 r5:80d9b8e0 r4:83744000 [  536.519349] [<80b1d178>] (warn_slowpath_fmt) from [<8035b294>] (kernfs_remove_by_name_ns+0xb8/0xc0) [  536.528416]  r9:00000001 r8:00000000 r7:824926dc r6:00000000 r5:80df6c2c r4:00000000 [  536.536162] [<8035b1dc>] (kernfs_remove_by_name_ns) from [<80b1f56c>] (sysfs_remove_link+0x4c/0x50) [  536.545225]  r6:7f00f02c r5:80df6c2c r4:83306400 [  536.549845] [<80b1f520>] (sysfs_remove_link) from [<806f9c8c>] (phy_detach+0xfc/0x11c) [  536.557780]  r5:82492000 r4:83306400 [  536.561359] [<806f9b90>] (phy_detach) from [<806f9cf8>] (phy_disconnect+0x4c/0x58) [  536.568943]  r7:824926dc r6:7f00f02c r5:82492580 r4:83306400 [  536.574604] [<806f9cac>] (phy_disconnect) from [<7f00a310>] (smsc95xx_disconnect_phy+0x30/0x38 [smsc95xx]) [  536.584290]  r5:82492580 r4:82492580 [  536.587868] [<7f00a2e0>] (smsc95xx_disconnect_phy [smsc95xx]) from [<7f001570>] (usbnet_stop+0x70/0x1a0 [usbnet]) [  536.598161]  r5:82492580 r4:82492000 [  536.601740] [<7f001500>] (usbnet_stop [usbnet]) from [<808baa70>] (__dev_close_many+0xb4/0x12c) [  536.610466]  r8:83744000 r7:00000000 r6:83744000 r5:83745b74 r4:82492000 [  536.617170] [<808ba9bc>] (__dev_close_many) from [<808bab78>] (dev_close_many+0x90/0x120) [  536.625365]  r7:00000001 r6:83745b74 r5:83745b8c r4:82492000 [  536.631026] [<808baae8>] (dev_close_many) from [<808bf408>] (unregister_netdevice_many+0x15c/0x704) [  536.640094]  r9:00000001 r8:81130b98 r7:83745b74 r6:83745bc4 r5:83745b8c r4:82492000 [  536.647840] [<808bf2ac>] (unregister_netdevice_many) from [<808bfa50>] (unregister_netdevice_queue+0xa0/0xe8) [  536.657775]  r10:8112bcc0 r9:83306c00 r8:83306c80 r7:8291e420 r6:83744000 r5:00000000 [  536.665608]  r4:82492000 [  536.668143] [<808bf9b0>] (unregister_netdevice_queue) from [<808bfac0>] (unregister_netdev+0x28/0x30) [  536.677381]  r6:7f01003c r5:82492000 r4:82492000 [  536.682000] [<808bfa98>] (unregister_netdev) from [<7f000b40>] (usbnet_disconnect+0x64/0xdc [usbnet]) [  536.691241]  r5:82492000 r4:82492580 [  536.694819] [<7f000adc>] (usbnet_disconnect [usbnet]) from [<8076b958>] (usb_unbind_interface+0x80/0x248) [  536.704406]  r5:7f01003c r4:83306c80 [  536.707984] [<8076b8d8>] (usb_unbind_interface) from [<8061765c>] (device_release_driver_internal+0x1c4/0x1cc) [  536.718005]  r10:8112bcc0 r9:80dff1dc r8:83306c80 r7:83744000 r6:7f01003c r5:00000000 [  536.725838]  r4:8291e420 [  536.728373] [<80617498>] (device_release_driver_internal) from [<80617684>] (device_release_driver+0x20/0x24) [  536.738302]  r7:83744000 r6:810d4f4c r5:8291e420 r4:8176ae30 [  536.743963] [<80617664>] (device_release_driver) from [<806156cc>] (bus_remove_device+0xf0/0x148) [  536.752858] [<806155dc>] (bus_remove_device) from [<80610018>] (device_del+0x198/0x41c) [  536.760880]  r7:83744000 r6:8116e2e4 r5:8291e464 r4:8291e420 [  536.766542] [<8060fe80>] (device_del) from [<80768fe8>] (usb_disable_device+0xcc/0x1e0) [  536.774576]  r10:8112bcc0 r9:80dff1dc r8:00000001 r7:8112bc48 r6:8291e400 r5:00000001 [  536.782410]  r4:83306c00 [  536.784945] [<80768f1c>] (usb_disable_device) from [<80769c30>] (usb_set_configuration+0x514/0x8dc) [  536.794011]  r10:00000000 r9:00000000 r8:832c3600 r7:00000004 r6:810d5688 r5:00000000 [  536.801844]  r4:83306c00 [  536.804379] [<8076971c>] (usb_set_configuration) from [<80775fac>] (usb_generic_driver_disconnect+0x34/0x38) [  536.814236]  r10:832c3610 r9:83745ef8 r8:832c3600 r7:00000004 r6:810d5688 r5:83306c00 [  536.822069]  r4:83306c00 [  536.824605] [<80775f78>] (usb_generic_driver_disconnect) from [<8076b850>] (usb_unbind_device+0x30/0x70) [  536.834100]  r5:83306c00 r4:810d5688 [  536.837678] [<8076b820>] (usb_unbind_device) from [<8061765c>] (device_release_driver_internal+0x1c4/0x1cc) [  536.847432]  r5:822fb480 r4:83306c80 [  536.851009] [<80617498>] (device_release_driver_internal) from [<806176a8>] (device_driver_detach+0x20/0x24) [  536.860853]  r7:00000004 r6:810d4f4c r5:810d5688 r4:83306c80 [  536.866515] [<80617688>] (device_driver_detach) from [<80614d98>] (unbind_store+0x70/0xe4) [  536.874793] [<80614d28>] (unbind_store) from [<80614118>] (drv_attr_store+0x30/0x3c) [  536.882554]  r7:00000000 r6:00000000 r5:83739200 r4:80614d28 [  536.888217] [<806140e8>] (drv_attr_store) from [<8035cb68>] (sysfs_kf_write+0x48/0x54) [  536.896154]  r5:83739200 r4:806140e8 [  536.899732] [<8035cb20>] (sysfs_kf_write) from [<8035be84>] (kernfs_fop_write_iter+0x11c/0x1d4) [  536.908446]  r5:83739200 r4:00000004 [  536.912024] [<8035bd68>] (kernfs_fop_write_iter) from [<802b87fc>] (vfs_write+0x258/0x3e4) [  536.920317]  r10:00000000 r9:83745f58 r8:83744000 r7:00000000 r6:00000004 r5:00000000 [  536.928151]  r4:82adacc0 [  536.930687] [<802b85a4>] (vfs_write) from [<802b8b0c>] (ksys_write+0x74/0xf4) [  536.937842]  r10:00000004 r9:007767a0 r8:83744000 r7:00000000 r6:00000000 r5:82adacc0 [  536.945676]  r4:82adacc0 [  536.948213] [<802b8a98>] (ksys_write) from [<802b8ba4>] (sys_write+0x18/0x1c) [  536.955367]  r10:00000004 r9:83744000 r8:80100244 r7:00000004 r6:76f47b58 r5:76fc0350 [  536.963200]  r4:00000004 [  536.965735] [<802b8b8c>] (sys_write) from [<80100060>] (ret_fast_syscall+0x0/0x48) [  536.973320] Exception stack(0x83745fa8 to 0x83745ff0) [  536.978383] 5fa0:                   00000004 76fc0350 00000001 007767a0 00000004 00000000 [  536.986569] 5fc0: 00000004 76fc0350 76f47b58 00000004 76f47c7c 76f48114 00000000 7e87991c [  536.994753] 5fe0: 00000498 7e879908 76e6dce8 76eca2e8 [  536.999922] ---[ end trace 9b835d809816b435 ]--- The driver should not be connecting and disconnecting the PHY when the device is opened and closed, it should be stopping and starting the PHY. The phy should be connected as part of binding and disconnected during unbinding. As this results in the PHY not being reset during open, link speed, etc. settings set prior to the link coming up are now not being lost. It is necessary for phy_stop() to only be called when the phydev still exists (resolving the above stack trace). When unbinding, ".unbind" will be called prior to ".stop", with phy_disconnect() already having called phy_stop() before the phydev becomes inaccessible. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Cc: Steve Glendinning <steve.glendinning@shawell.net> Cc: UNGLinuxDriver@microchip.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: stable@kernel.org # v5.15 Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-22usb: smsc: use eth_hw_addr_set()Jakub Kicinski1-2/+4
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-08ethernet: use platform_get_ethdev_address()Jakub Kicinski1-2/+1
Use the new platform_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, net; @@ - eth_platform_get_mac_address(dev, net->dev_addr) + platform_get_ethdev_address(dev, net) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-24smsc95xx: fix stalled rx after link changeAaro Koskinen1-0/+3
After commit 05b35e7eb9a1 ("smsc95xx: add phylib support"), link changes are no longer propagated to usbnet. As a result, rx URB allocation won't happen until there is a packet sent out first (this might never happen, e.g. running just ssh server with a static IP). Fix by triggering usbnet EVENT_LINK_CHANGE. Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann1-1/+1
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-11-13net: usb: switch to dev_get_tstats64 and remove usbnet_get_stats64 aliasHeiner Kallweit1-1/+1
Replace usbnet_get_stats64() with new identical core function dev_get_tstats64() in all users and remove usbnet_get_stats64(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-03net/smscx5xx: change to of_get_mac_address() eth_platform_get_mac_address()Łukasz Stelmach1-6/+7
Use more generic eth_platform_get_mac_address() which can get a MAC address from other than DT platform specific sources too. Check if the obtained address is valid. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28smsc95xx: add phylib supportAndre Edich1-265/+134
Generally, each PHY has their own configuration and it can be done through an external PHY driver. The smsc95xx driver uses only the hard-coded internal PHY configuration. This patch adds phylib support to probe external PHY drivers for configuring external PHYs. The MDI-X configuration for the internal PHYs moves from drivers/net/usb/smsc95xx.c to drivers/net/phy/smsc.c. Signed-off-by: Andre Edich <andre.edich@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28smsc95xx: use usbnet->driver_privAndre Edich1-33/+28
Using `void *driver_priv` instead of `unsigned long data[]` is more straightforward way to recover the `struct smsc95xx_priv *` from the `struct net_device *`. Signed-off-by: Andre Edich <andre.edich@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28smsc95xx: remove redundant function argumentsAndre Edich1-18/+17
This patch removes arguments netdev and phy_id from the functions smsc95xx_mdio_read_nopm and smsc95xx_mdio_write_nopm. Both removed arguments are recovered from a new argument `struct usbnet *dev`. Signed-off-by: Andre Edich <andre.edich@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06smsc95xx: avoid memory leak in smsc95xx_bindAndre Edich1-1/+2
In a case where the ID_REV register read is failed, the memory for a private data structure has to be freed before returning error from the function smsc95xx_bind. Fixes: bbd9f9ee69242 ("smsc95xx: add wol support for more frame types") Signed-off-by: Andre Edich <andre.edich@microchip.com> Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06smsc95xx: check return value of smsc95xx_resetAndre Edich1-0/+6
The return value of the function smsc95xx_reset() must be checked to avoid returning false success from the function smsc95xx_bind(). Fixes: 2f7ca802bdae2 ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver") Signed-off-by: Andre Edich <andre.edich@microchip.com> Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23usbnet: smsc95xx: Fix use-after-free after removalTuomas Tynkkynen1-1/+1
Syzbot reports an use-after-free in workqueue context: BUG: KASAN: use-after-free in mutex_unlock+0x19/0x40 kernel/locking/mutex.c:737 mutex_unlock+0x19/0x40 kernel/locking/mutex.c:737 __smsc95xx_mdio_read drivers/net/usb/smsc95xx.c:217 [inline] smsc95xx_mdio_read+0x583/0x870 drivers/net/usb/smsc95xx.c:278 check_carrier+0xd1/0x2e0 drivers/net/usb/smsc95xx.c:644 process_one_work+0x777/0xf90 kernel/workqueue.c:2274 worker_thread+0xa8f/0x1430 kernel/workqueue.c:2420 kthread+0x2df/0x300 kernel/kthread.c:255 It looks like that smsc95xx_unbind() is freeing the structures that are still in use by the concurrently running workqueue callback. Thus switch to using cancel_delayed_work_sync() to ensure the work callback really is no longer active. Reported-by: syzbot+29dc7d4ae19b703ff947@syzkaller.appspotmail.com Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner1-13/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07net: usb: smsc: fix warning reported by kbuild test robotPetr Štetiar1-1/+1
This patch fixes following warning reported by kbuild test robot: In function ‘memcpy’, inlined from ‘smsc75xx_init_mac_address’ at drivers/net/usb/smsc75xx.c:778:3, inlined from ‘smsc75xx_bind’ at drivers/net/usb/smsc75xx.c:1501:2: ./include/linux/string.h:355:9: warning: argument 2 null where non-null expected [-Wnonnull] return __builtin_memcpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/usb/smsc75xx.c: In function ‘smsc75xx_bind’: ./include/linux/string.h:355:9: note: in a call to built-in function ‘__builtin_memcpy’ I've replaced the offending memcpy with ether_addr_copy, because I'm 100% sure, that of_get_mac_address can't return NULL as it returns valid pointer or ERR_PTR encoded value, nothing else. I'm hesitant to just change IS_ERR into IS_ERR_OR_NULL check, as this would make the warning disappear also, but it would be confusing to check for impossible return value just to make a compiler happy. Fixes: adfb3cb2c52e ("net: usb: support of_get_mac_address new ERR_PTR error") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Reviewed-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-06net: usb: support of_get_mac_address new ERR_PTR errorPetr Štetiar1-1/+1
There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17usbnet: smsc95xx: check for csum being in last four bytesBen Dooks1-1/+18
The manual states that the checksum cannot lie in the last DWORD of the transmission, so add a basic check for this and fall back to software checksumming the packet. This only seems to trigger for ACK packets with no options or data to return to the other end, and the use of the tx-alignment option makes it more likely to happen. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17usbnet: smsc95xx: fix memcpy for accessing rx-dataBen Dooks1-5/+2
Change the RX code to use get_unaligned_le32() instead of the combo of memcpy and cpu_to_le32s(&var). Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17usbnet: smsc95xx: simplify tx_fixup codeBen Dooks1-15/+13
The smsc95xx_tx_fixup is doing multiple calls to skb_push() to put an 8-byte command header onto the packet. It would be easier to do one skb_push() and then copy the data in once the push is done. We also make the code smaller by using proper unaligned puts for the header. This merges in the CPU to LE32 conversion as well and makes the whole sequence easier to understand hopefully. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17usbnet: smsc95xx: fix rx packet alignmentBen Dooks1-0/+1
The smsc95xx driver already takes into account the NET_IP_ALIGN parameter when setting up the receive packet data, which means we do not need to worry about aligning the packets in the usbnet driver. Adding the EVENT_NO_IP_ALIGN means that the IPv4 header is now passed to the ip_rcv() routine with the start on an aligned address. Tested on Raspberry Pi B3. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09net: smsc95xx: Fix MTU rangeStefan Wahren1-0/+2
The commit f77f0aee4da4 ("net: use core MTU range checking in USB NIC drivers") introduce a common MTU handling for usbnet. But it's missing the necessary changes for smsc95xx. So set the MTU range accordingly. This patch has been tested on a Raspberry Pi 3. Fixes: f77f0aee4da4 ("net: use core MTU range checking in USB NIC drivers") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03usbnet: smsc95xx: disable carrier check while suspendingFrieder Schrempf1-0/+7
We need to make sure, that the carrier check polling is disabled while suspending. Otherwise we can end up with usbnet_read_cmd() being issued when only usbnet_read_cmd_nopm() is allowed. If this happens, read operations lock up. Fixes: d69d169493 ("usbnet: smsc95xx: fix link detection for disabled autonegotiation") Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Raghuram Chary J <RaghuramChary.Jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29smsc95xx: Check for Wake-on-LAN modesFlorian Fainelli1-0/+3
The driver does not check for Wake-on-LAN modes specified by an user, but will conditionally set the device as wake-up enabled or not based on that, which could be a very confusing user experience. Fixes: e0e474a83c18 ("smsc95xx: add wol magic packet support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-09-13smsc95xx: Configure pause time to 0xffff when tx flow control enabledNisar Sayed1-6/+5
Configure pause time to 0xffff when tx flow control enabled Set pause time to 0xffff in the pause frame to indicate the partner to stop sending the packets. When RX buffer frees up, the device sends pause frame with pause time zero for partner to resume transmission. Fixes: 2f7ca802bdae ("Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver") Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14smsc95xx: use ethtool_op_get_ts_info()Petr Kulhavy1-0/+1
This change enables the use of SW timestamping on Raspberry PI. smsc95xx uses the usbnet transmit function usbnet_start_xmit(), which implements software timestamping. However the SOF_TIMESTAMPING_TX_SOFTWARE capability was missing and only SOF_TIMESTAMPING_RX_SOFTWARE was announced. By using ethtool_op_get_ts_info() as get_ts_info() also the SOF_TIMESTAMPING_TX_SOFTWARE is announced. Signed-off-by: Petr Kulhavy <brain@jikos.cz> Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21smsc95xx: Support only IPv4 TCP/UDP csum offloadNisar Sayed1-3/+10
When TX checksum offload is used, if the computed checksum is 0 the LAN95xx device do not alter the checksum to 0xffff. In the case of ipv4 UDP checksum, it indicates to receiver that no checksum is calculated. Under ipv6, UDP checksum yields a result of zero must be changed to 0xffff. Hence disabling checksum offload for ipv6 packets. Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Reported-by: popcorn mix <popcornmix@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-6/+6
Both conflict were simple overlapping changes. In the kaweth case, Eric Dumazet's skb_cow() bug fix overlapped the conversion of the driver in net-next to use in-netdev stats. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20smsc95xx: Use skb_cow_head to deal with cloned skbsJames Hughes1-6/+6
The driver was failing to check that the SKB wasn't cloned before adding checksum data. Replace existing handling to extend/copy the header buffer with skb_cow_head. Signed-off-by: James Hughes <james.hughes@raspberrypi.org> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17smsc95xx: Add comments to the registers definitionMartin Wetterwald1-2/+2
This chip is used by a lot of embedded devices and also by the Raspberry Pi 1, 2 & 3 which were created to promote the study of computer sciences. Students wanting to learn kernel / network device driver programming through those devices can only rely on the Linux kernel driver source to make their own. This commit adds a lot of comments to the registers definition to expand the register names. Cc: Steve Glendinning <steve.glendinning@shawell.net> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> CC: David Miller <davem@davemloft.net> Signed-off-by: Martin Wetterwald <martin@wetterwald.eu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Steve Glendinning <steve.glendinning@shawell.net> Acked-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04net: usbnet: support 64bit statsGreg Ungerer1-0/+1
Add support for the net stats64 counters to the usbnet core. With that in place put the hooks into every usbnet driver to use it. This is a strait forward addition of 64bit counters for RX and TX packet and byte counts. It is done in the same style as for the other net drivers that support stats64. Note that the other stats fields remain as 32bit sized values (error counts, etc). The motivation to add this is that it is not particularly difficult to get the RX and TX byte counts to wrap on 32bit platforms. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22net: usb: smsc95xx: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-12/+12
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06smsc95xx: Add mdix control via ethtoolWoojung Huh1-3/+106
Add mdix control through ethtool. Signed-off-by: Woojung Huh <Woojung.huh@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-01usbnet: smsc95xx: fix link detection for disabled autonegotiationChristoph Fritz1-0/+51
To detect link status up/down for connections where autonegotiation is explicitly disabled, we don't get an irq but need to poll the status register for link up/down detection. This patch adds a workqueue to poll for link status. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04usbnet: smsc95xx: silence an uninitialized variable warningDan Carpenter1-1/+3
If the call to fn() fails then "buf" is uninitialized. Just return the error code in that case. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02net/smscx5xx: use the device tree for mac addressArnd Bergmann1-1/+11
This takes the MAC address for smsc75xx/smsc95xx USB network devices from a the device tree. This is required to get a usable persistent address on the popular beagleboard, whose hardware designers accidentally forgot that an ethernet device really requires an a MAC address to be functional. The Raspberry Pi also ships smsc9514 without a serial EEPROM, stores the MAC address in ROM accessible via VC4 firmware. The smsc75xx and smsc95xx drivers are just two copies of the same code, so better fix both. [lkundrak@v3.sk: updated to use of_get_property() as per suggestion from Arnd, reworded the message and comments a bit] Tested-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-23usbnet: remove invalid checkAndrzej Hajda1-5/+0
skb->len is always non-negative. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12usbnet: smsc95xx: dereferencing NULL pointerSudip Mukherjee1-2/+4
we were dereferencing dev to initialize pdata. but just after that we have a BUG_ON(!dev). so we were basically dereferencing the pointer first and then tesing it for NULL. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10usbnet: smsc95xx: add reset_resume function with reset operationJoonyoung Shim1-1/+13
The smsc95xx needs to resume with reset operation. Otherwise it causes system hang by network error like below after resume. This case appears on odroid u3 board. [ 9.727600] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped [ 9.727648] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped [ 9.727689] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped [ 9.727728] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped [ 9.729486] PM: resume of devices complete after 2011.219 msecs [ 10.117609] Restarting tasks ... done. [ 11.725099] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped [ 13.480846] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped [ 13.481361] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped ... Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17usbnet: remove generic hard_header_len checkEmil Goode1-0/+4
This patch removes a generic hard_header_len check from the usbnet module that is causing dropped packages under certain circumstances for devices that send rx packets that cross urb boundaries. One example is the AX88772B which occasionally send rx packets that cross urb boundaries where the remaining partial packet is sent with no hardware header. When the buffer with a partial packet is of less number of octets than the value of hard_header_len the buffer is discarded by the usbnet module. With AX88772B this can be reproduced by using ping with a packet size between 1965-1976. The bug has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=29082 This patch introduces the following changes: - Removes the generic hard_header_len check in the rx_complete function in the usbnet module. - Introduces a ETH_HLEN check for skbs that are not cloned from within a rx_fixup callback. - For safety a hard_header_len check is added to each rx_fixup callback function that could be affected by this change. These extra checks could possibly be removed by someone who has the hardware to test. - Removes a call to dev_kfree_skb_any() and instead utilizes the dev->done list to queue skbs for cleanup. The changes place full responsibility on the rx_fixup callback functions that clone skbs to only pass valid skbs to the usbnet_skb_return function. Signed-off-by: Emil Goode <emilgoode@gmail.com> Reported-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16drivers/net: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06usb: Fix FSF address in file headersJeff Kirsher1-2/+1
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: Oliver Neukum <oliver@neukum.org> CC: Steve Glendinning <steve.glendinning@shawell.net> CC: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-25usbnet: smsc95xx: don't recover device if suspend fails in system sleepMing Lei1-1/+5
If suspend callback fails in system sleep context, usb core will ignore the failure and let system sleep go ahead further, so this patch doesn't recover device under this situation. Also add comments on the case. Acked-by: David S. Miller <davem@davemloft.net> Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-26usbnet: smsc95xx: rename FEATURE_AUTOSUSPENDMing Lei1-7/+7
The name of FEATURE_AUTOSUSPEND is very misleading and the actual meaning is remote wakeup, but a device incapable of remote wakeup still can support USB autosuspend under some situations, so rename it to avoid misunderstanding. Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-26usbnet: smsc95xx: fix broken runtime suspendMing Lei1-10/+2
Commit b2d4b150(smsc95xx: enable dynamic autosuspend) implements autosuspend, but breaks current runtime suspend, such as: when the interface becomes down, the usb device can't be put into runtime suspend any more. This patch fixes the broken runtime suspend. Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-26usbnet: smsc95xx: fix suspend failureMing Lei1-3/+9
The three below functions: smsc95xx_enter_suspend0() smsc95xx_enter_suspend1() smsc95xx_enter_suspend2() return > 0 in case of success, so they will cause smsc95xx_suspend() to return > 0 and cause suspend failure. The bug is introduced in commit 3b9f7d(smsc95xx: fix error handling in suspend failure case). Cc: <stable@vger.kernel.org> [3.8] Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-04drivers: net: usb: Remove unnecessary alloc/OOM messagesJoe Perches1-4/+2
alloc failures already get standardized OOM messages and a dump_stack. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-05smsc95xx: enable dynamic autosuspendSteve Glendinning1-1/+150
This patch enables USB dynamic autosuspend for LAN9500A. This saves very little power in itself, but it allows power saving in upstream hubs/hosts. The earlier devices in this family (LAN9500/9512/9514) do not support this feature. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-05smsc95xx: eliminate duplicate warnings on io failureSteve Glendinning1-217/+67
The register read/write functions already log a warning if an access fails, so this patch removes the additional warnings logged by callers that don't add any more information. This patch makes the resulting driver smaller by not containing as many warning strings. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-11 14:57:24 +0300